Database Info

Kaiser boots to Tri-color screen unless I use mtty boot command, help...

ok this is the wierdest thing ever. Yesterday I soft reset my phone (which was flashed to HardSPL and SuperCID and the Hyperdragod II rom about 2 weeks ago) and it now only goes to the bootloader screen. I ran mtty and did a boot command and the phone boots! But as soon as I softreset it goes back to the bootloader screen. Please note it wasnt a bad flash or anything because since I flashed 2 weeks ago my phone has worked 100% fine, soft resets and everything worked. I tried flashing to the original Kaiser bootloader, I flashed back to the original HTC rom and it still does this. One thing I noticed is that when I use mtty to boot and plug in my phone via usb my Windows XP PC doesnt start activesync, windows says it cannot recognize the plugged in usb device! However in tricolor mode I can still flash 100% so I dont think the usb port is defective.

same here..
the phone was hanging at night... wanted to reboot.. and tricolor..
Now I am using it for months.. an something it boots ok and sometimes I have to use MTTY or waiting without the battery in it for 10 min solves it sometimes to.
gone install 6.1 now.. hope it fixes it.

what does it display at bootloader screen?

sorry to jump in, but mine's started doing this today.
I had it flashed with 'Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid V2_1_65.14.06', which seemed to be working OK.
Then I soft reset it earlier today and got to loading my tday screen, screamed the battery was dead (it was nearly fully charged) and turned off.
I turned it back on and it was as though it was booting after the soft reset, or like I'd taken the battery out (I hadn't).
I couldn't get this to change, so I flashed it with Sleuth v3.0, one ive used very successfully before - now it only shows the tri-colour bootloader screen, with the following details:
KAIS130 MFG
SPL-1.0.0.oliPoF
CPLD-8
USB
Anyone know what I can do?
Thanks in advance
'tunes

Do the letters RUUNBH appear anywhere on the screen. LOOK AGAIN!
If so I can help easily, if not It'll take a little homework on your part. Let me know.

the exact text from the bootloader screen is:
KAIS130 MFG
SPL-1.0.OLIPOF
CPLD-8
Down the bottom it says Serial, or USB if it's connected to my PC.
(these may have changed from earlier, ive been trying all sorts to get this going properly!)
Thanks for your help

mad_tunes said:
the exact text from the bootloader screen is:
KAIS130 MFG
SPL-1.0.OLIPOF
CPLD-8
Down the bottom it says Serial, or USB if it's connected to my PC.
(these may have changed from earlier, ive been trying all sorts to get this going properly!)
Thanks for your help
Click to expand...
Click to collapse
I answered you in the other thread. Use one thread for correspondence, we don't need 15 different threads & posts about the same thing.

Help!
I have the same problem descripted in this thread but I wasn't able to find the other thread you are talking about with the answer... Is there anybody here who would help an unlucky tytn2 owner? Thank you so much... I'm waiting for you!

What is wrong with my phone? Tried to Flash new Rom...Black Screen

Okay. I tried to install one of Dutty's ROM's that can be found here: http://forum.xda-developers.com/showthread.php?t=398271.
I read through all the stickys and FAQ's first. I read Dutty's wiki, the Kaiser wiki, and the flashing new ROM wiki. I followed all of the directions and followed Dutty's instructions to the T.
After installing the HardSPL found here(http://forum.xda-developers.com/showthread.php?t=334679), I backed up all my personal info/data.
Then used the Custom RUU Dutty supplied and proceed through the ROM flashing process. Everything went fine and I got no error messages. But when my phone booted up I got a black screen. I waited but my phone stayed on the black screen. So I pressed the standby button on and off a few times and eventually I wound up with a black screen that had about a million multi-colored speckled dots all over it. And I have been stuck on this screen since. I've tried soft-reseting and hard resetting but nothing is working.
I am Using an ATT Tilt BTW.
Please Help me. My phone is my life so right now I'm feeling like Dionne Farris.....Hopeless....

ahh that sounds like a nightmare... wish i could help

klrob33 said:
Okay. I tried to install one of Dutty's ROM's that can be found here: http://forum.xda-developers.com/showthread.php?t=398271.
I read through all the stickys and FAQ's first. I read Dutty's wiki, the Kaiser wiki, and the flashing new ROM wiki. I followed all of the directions and followed Dutty's instructions to the T.
After installing the HardSPL found here(http://forum.xda-developers.com/showthread.php?t=334679), I backed up all my personal info/data.
Then used the Custom RUU Dutty supplied and proceed through the ROM flashing process. Everything went fine and I got no error messages. But when my phone booted up I got a black screen. I waited but my phone stayed on the black screen. So I pressed the standby button on and off a few times and eventually I wound up with a black screen that had about a million multi-colored speckled dots all over it. And I have been stuck on this screen since. I've tried soft-reseting and hard resetting but nothing is working.
I am Using an ATT Tilt BTW.
Please Help me. My phone is my life so right now I'm feeling like Dionne Farris.....Hopeless....
Click to expand...
Click to collapse
can you get into bootloader mode?
hold down power and camera button while inserting stylus it should introduce you to the tri color screen. Please tell us what it states. You may have just experienced a bad flash or you have the radio from hell installed on your device

redbandana said:
can you get into bootloader mode?
hold down power and camera button while inserting stylus it should introduce you to the tri color screen. Please tell us what it states. You may have just experienced a bad flash or you have the radio from hell installed on your device
Click to expand...
Click to collapse
Yes I can get to Bootloader mode.
In the red bar it says:
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
And Serial at the bottom in the white bar where USB normaly would be.

klrob33 said:
Yes I can get to Bootloader mode.
In the red bar it says:
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
And Serial at the bottom in the white bar where USB normaly would be.
Click to expand...
Click to collapse
ok soft reset your phone and when it starts up does something like this appear in red text?
r 1.65.20.29
g 25.88.40.04w
d 3.29.xx.xx
please tell me what it says after R

R- 1.58.25.17

klrob33 said:
R- 1.58.25.17
Click to expand...
Click to collapse
well it appears to be a bad flash. unplug your device from the usb cable, restart your computer, and flash again.
Hopefully after your computer restarts it will recognize the device as being connected. If it doesn't just double click on your windows mobile device center icon and it should connect. After connecting just reflash the rom
edit

I had the same problem, what i did was read all through the thread of the ROM or while inside the thread i use the search function and type in the keywords like "blank screen" it happened to me exactly, but i didnt bother to post since i found the answer, 1 user said flash it to WM 6.1 i did exactly that and it helped! some said not necessary, but i didnt see that instruction so i flashed the 6.1 blindly and fortunately it worked...
here is the thread
http://forum.xda-developers.com/showthread.php?t=375583&page=30
on the search function type black screen and you should get and idea what you need to do...

redbandana said:
well it appears to be a bad flash. unplug your device from the usb cable, restart your computer, and flash again.
Hopefully after your computer restarts it will recognize the device as being connected. If it doesn't just double click on your windows mobile device center icon and it should connect. After connecting just reflash the rom
edit
Click to expand...
Click to collapse
I tried that and It different work. I'm trying a whole new ROM now and I hope it works.

Problem solved.
Thanks to everybody for their help.
I just used a different ROM and everything worked perfectly. I guess that ROM just didn't want to work with my phone. But it's okay. The ROM I'm using now is perfect.

Please Help! TYTN II from WM6.0 To WM6.1

I have read through endless posts and stickies.. I still can't figure out what the correct procedure is for updating my TYTN II from WM6.0 to WM6.1
I would greatly appreciate it, if someone would lay it out step my step
I tried to flash with the WM6.1 update, it said there was a vender error.
I tried flashing with HardSPL 3.28 and it stops at 0% and says there is there is a communication error, and to click next to perform the recovery. I perform the recovery, after removing the battery and putting it back in, the phone starts up normal.
I tried the white screen solution.. it reaches the three coloured display with USB and just sits there.. i eventually reboot the phone.. and it starts back up normally..
but none of the flashing procedures have worked yet..
I used the files found Here for the white screen problem.
I don't know what else to try..
Direct update - Invalid Vendor ID
HardSPL 3.28 - Communication Error
JumpSPL - Does nothing...
What am i missing?

Puff1911 said:
What am i missing?
Click to expand...
Click to collapse
Interpreation and sense of what you are reading.

http://hpcmonex.net/olipro/KaiserUnlocker.zip
That is the link to the Kaiser Unlocker by Olipro. It Hard-SPL's and SIM Unlocks. If you do not need the sim unlock simply flash to a different ROM after the first step.

Thanks socalkevin21 for providing a usable response

Not a problem, let me know if you have any issues.

The software says to unplug the USB connection as soon as the screen turns to the three coloured screen.
when i plug back in, the progress bar waits a couple seconds then jumps directly to 100%.. is that correct?
The phone reboots, and starts back up as normal.. but the same version ROM is still there..

Puff1911 said:
The software says to unplug the USB connection as soon as the screen turns to the three coloured screen.
when i plug back in, the progress bar waits a couple seconds then jumps directly to 100%.. is that correct?
The phone reboots, and starts back up as normal.. but the same version ROM is still there..
Click to expand...
Click to collapse
enter bootloader (press and hold the camera button all the way while pushing the stylus into the reset hole)
you should now be at a tri-color screen
what does this screen say?

KAIS130 MFG
SPL-1.0.OliPof
CPLD-8
when I click on Unlock Radio, it says "incompatible device"
Is that also normal?
Do i need to patch the radio as well?

wooooo!!! got it! i eventually got it to update the radio by clicking the button over and over..
I didn't get to unlock the phone (step 3).. but after i tried to update to windows mobile 6.1.. and it worked!
Thanks socalkevin21 and mbarvian!!

Well my device runs a lot faster.. but also sticks a helluva lot more!
Also my camera doesn't show anything, it takes pictures fine.. but there is no live display.. anyone having that problem?
And i also lost Voice Commander.. anyone have the install files for that?
**Fixed the camera problem. I had installed the HTC camera patch... Problem solved after removing it.**

Puff1911 said:
Well my device runs a lot faster.. but also sticks a helluva lot more!
Also my camera doesn't show anything, it takes pictures fine.. but there is no live display.. anyone having that problem?
And i also lost Voice Commander.. anyone have the install files for that?
**Fixed the camera problem. I had installed the HTC camera patch... Problem solved after removing it.**
Click to expand...
Click to collapse
Try a new HardSPL.
WM6.1 freezes sometimes with the OliPof 1.0 Hard SPL.
All the latest Hard SPL's are here: http://forum.xda-developers.com/showthread.php?t=396922
There are no other differences between 1 and 3.* other than the version number - they both work the same (oh and no MFG in 3.*, but you won't notice that)
Ta
Dave

Help! My Uni is dead!!!

Hi guys!
I flashed back Tomal's 8.5 and I was installing my applications. Everything was working good.
But, after a soft-reset required by an application, the screen remained black. No turn on, nothing at all.
If I plug in usb the charging led won't turn on.
If I remove the battery and put the usb cable in, the led turns red.
I can't enter in bootloader mode.
The only thing that seems to go is the hard reset: I can get the white screen with the question "x to exit..." but nothing more!
What can I do?
Thanks...

Hey.
You have to do DOC FORMAT.
http://forum.xda-developers.com/showpost.php?p=1097645&postcount=4

I tried it, but I cannot enter in bootloader mode, I can only enter in hardreset dialog and my Uni isn't recognized by XP...

Hi!
My Xda Exec is dead I flash Tomal ROM and the next moment my phone is black srceen. I tried it to hard reset but nothing resoult. The PDA enter the boot loader mode but my PC is not connected the PDA. The pda screen "USB V1.01".
Help me
(Sorry I can from hungary...)

If you can enter in bootloader mode there's a chance to format it. Read the wiki.
My problem is that I can't even enter in bootloader!

Auzman said:
If you can enter in bootloader mode there's a chance to format it. Read the wiki.
My problem is that I can't even enter in bootloader!
Click to expand...
Click to collapse
Yes i think. But "USB port can not open.".

I suppose you tried also this method...
If so, and nothing happened, I'm sorry, but I have no other ideas for you...

Problem solved!
I left my Uni without battery for few hours (don't know how it helped), I tried again with a fully charged battery and I've been able to get into bootloader.
I made a DOC format and reinstalled Master Tomal's rom.
Everything working well now...
Thanks!

Problem installing official ROM

Hi all..
I'll get directly into the scenario..
HardSPLed (1.17) my HTC Snap device ->
installed [WM6.5 STD 21854][Build 3VO.2.50.112509] works perfectly but I wanted to get back to the original WM6.1 ->
went back to WM6.1 successfully, after a while the official WM6.5 ROM realesed by HTC ->
downloaded it ->
tried to install it, everything goes well till the upgrade indicator reaches 29% and hang for no reason and giving me a 262 error after a while!!! then I followed instructions to recover the upgrade process as shown in the upgrade application then it hangs again at point 29% giving me the same error!!!!
I tried many times the steps of recovering and the same thing happens.. I'm confirming that my usb cable is working good and Windows Mobile sync application works great.
So I decided to install the 3VO.2.50 version again since I had a dead device and surprisingly everything works fine with the cooked version..
Now the problem is I need to install the new HTC OFFICIAL ROM and I can't do this... i've followed many topics here that nearly the same my problem but there is nothing except the frustration now i stucked in the coocked ROM and can't install the official ROM nor getting back to the original WM6.1 version
Any help guys will be much appreciated ..
Thanx in advance..

See this thread, follow the directions of the last post.
http://forum.xda-developers.com/showthread.php?t=586827

I have had the same issue installing WM 6.5 official ROM from HTC on mine. I followed the recovery process around 6 or 7 times before succeeding. it's kind of frustrating, but it worked in the end.

Thanks for help..
After walkingthrough sikkboy626 link i was able to install the official WM6.5 ROM
But after the upgrade process ends successfully the device restarted and only shows a black screen with 'smart mobility' and at the down left of the screen there is a B G R D letters, beside each of them there are some kind of numbers (in orange color)
Then it just hangs !!!!
Any clue guys ???

abdelaleem said:
Thanks for help..
After walkingthrough sikkboy626 link i was able to install the official WM6.5 ROM
But after the upgrade process ends successfully the device restarted and only shows a black screen with 'smart mobility' and at the down left of the screen there is a B G R D letters, beside each of them there are some kind of numbers (in orange color)
Then it just hangs !!!!
Any clue guys ???
Click to expand...
Click to collapse
that's the normal boot screen which indicates the radio version, rom version. just wait a few minutes for the phone to boot for the 1st time. if it still doesn't do anything, try re-flashing.

raphaelc said:
if it still doesn't do anything, try re-flashing.
Click to expand...
Click to collapse
Tried everything with no success ... tried to hard reset and didn't work, tried to flashing also didn't work, gave me 260 error message 'cause it's not seeing the device, my computer also doesn't see the device... !!!!!!
I'm about to crash my snap

abdelaleem said:
Tried everything with no success ... tried to hard reset and didn't work, tried to flashing also didn't work, gave me 260 error message 'cause it's not seeing the device, my computer also doesn't see the device... !!!!!!
I'm about to crash my snap
Click to expand...
Click to collapse
this is really a common error when flashing the ROM. try doing the recovery process as indicated many many times until success.

raphaelc said:
this is really a common error when flashing the ROM. try doing the recovery process as indicated many many times until success.
Click to expand...
Click to collapse
Can't flashing because the sync application nor pc seeing the device !!!!

abdelaleem said:
Can't flashing because the sync application nor pc seeing the device !!!!
Click to expand...
Click to collapse
in the recovery process, you don't need sync. read the documentation delivered with the ROM, they say how to recover.

Yes I know that i don't need sync in a recovery process.. i'm just proofing that the recovery/upgrade application doesn't see the device.. so i'm stuck here, i can't re-flash, i can't hard reset i can't do anything using my pc 'cause simply it doesn't know that the phone is connected to it...!!!!

abdelaleem said:
Yes I know that i don't need sync in a recovery process.. i'm just proofing that the recovery/upgrade application doesn't see the device.. so i'm stuck here, i can't re-flash, i can't hard reset i can't do anything using my pc 'cause simply it doesn't know that the phone is connected to it...!!!!
Click to expand...
Click to collapse
the only thing that i can tell you is to try the recovery process over and over until it connects correctly to the device. i have had the same issue as you : my phone wouldn't boot at all and was stuck at 29%. i re-booted my computer and followed the recovery process around 6 or 7 times as suugested on the screen, and then it worked.

abdelaleem said:
Yes I know that i don't need sync in a recovery process.. i'm just proofing that the recovery/upgrade application doesn't see the device.. so i'm stuck here, i can't re-flash, i can't hard reset i can't do anything using my pc 'cause simply it doesn't know that the phone is connected to it...!!!!
Click to expand...
Click to collapse
also, try to check this out : http://forum.xda-developers.com/showthread.php?t=324369

still the same after trying hundreds of times:
-Restarting my pc
-Re-installing Windows Mobile Device Center
-removing the battery to insure that it's shutdowned
-trying another pc with a deferent version of windows
don't know what to do else
I've now a useless dead phone

ok, so what do you get when you start flashing ? do you see the progressbar on the phone ? do you see a black screen ? please be more specific than "it doesn't work". detail each step you do and i will try to help.

Ok.. sorry for not being specific..
While trying the steps in my last post the screen of my Snap just showing a black screen written on it 'smart mobility' and at the down left of the screen there is a B G R D letters, beside each of them there are some kind of numbers (in orange color)
and it's showing this screen all the time, after restarting the device, while trying to flash... all the time nothing but the same screen appears, no progress bar, no tri-color screen no anything but the 'smart mobility' screen...
Thanks alot for tryin' to help

abdelaleem said:
Ok.. sorry for not being specific..
While trying the steps in my last post the screen of my Snap just showing a black screen written on it 'smart mobility' and at the down left of the screen there is a B G R D letters, beside each of them there are some kind of numbers (in orange color)
and it's showing this screen all the time, after restarting the device, while trying to flash... all the time nothing but the same screen appears, no progress bar, no tri-color screen no anything but the 'smart mobility' screen...
Thanks alot for tryin' to help
Click to expand...
Click to collapse
Ok :
1 - Remove the battery from your phone for a few seconds. Put the battery back in.
2 - While holding volume DOWN button, press the power button. The phone will enter "bootloader" mode and you will see a tricolor bootscreen.
do you see this screen ?

Yes... finally i see the tri color screen now...
what should i do after that??
and btw the pc realize the phone now do I have to try reflashing again??

Thanks alot raphaelc for helping me.. phone is working now perfectly after reflashing
Really appreciate your help..

no pb. i had really the same bad experience