Delete Delete - G1 Android Development

Delete Delete - G1 Android Development

deletedeletedelete

It's just empty image. At least I think that it is

nk02 said:
Hi! I'm uploading a zip with img from tatoo wwe 1.65.405.1 rom, i've no time to try to pack a rom for magic/dream (and i prefer original android, not htc !)
This is the build.prop
Code:
ro.ril.ecc.HTC-WWE=999
ro.ril.ecc.HTC-Russia=01,02,03,04,001,002,003,004
ro.ril.ecc.HTC-EastEurope=92,93,94
ro.ril.enable.a52.HTC-ITA=1
ro.ril.enable.a53.HTC-ITA=1
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=DRC79
ro.build.display.id=DRC79
ro.build.version.incremental=70570
ro.build.version.sdk=4
ro.build.version.codename=REL
ro.build.version.release=1.6
ro.build.date=Thu Sep 24 20:56:07 CST 2009
ro.build.date.utc=1253796967
ro.build.type=user
ro.build.user=u70000
ro.build.host=Android-X03
ro.build.tags=release-keys
ro.product.model=HTC Tattoo
ro.product.brand=htc_wwe
ro.product.name=htc_tattoo
ro.product.device=bahamas
ro.product.board=bahamas
ro.product.cpu.abi=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=
ro.product.locale.region=
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product=bahamas
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=1.65.405.1 CL#70570 release-keys
ro.build.changelist=70570
ro.build.modelid=CLIC*****
ro.build.fingerprint=htc_wwe/htc_tattoo/bahamas/bahamas:1.6/DRC79/70570:user/release-keys
ro.product.version=1.65.405.1
keyguard.no_require_sim=1
# end build properties
#
# system.prop for device
#
rild.libpath=/system/lib/libhtc_ril.so
ro.ril.hep = 1
ro.ril.enable.dtm = 1
ro.ril.gprsclass = 12
ro.ril.hsdpa.category = 8
ro.ril.hsxpa = 1
wifi.interface = tiwlan0
ro.ril.htcmaskw1.bitmask = 4294967295
ro.ril.htcmaskw1 = 14449
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 45
# density in DPI of the LCD of this board. This is used to scale the UI
# appropriately. If this property is not defined, the default value is 160 dpi.
ro.sf.lcd_density = 120
# ro.sf.lcd_density = 160
ro.com.google.locationfeatures=1
# View configuration for QVGA
view.fading_edge_length = 8
view.touch_slop = 15
view.minimum_fling_velocity = 25
view.scroll_friction = 0.008
# For SD storage insert notification sound
persist.service.mount.playsnd = 0
# For the agps default value
ro.ril.def.agps.mode = 2
# For no auto focus devices
ro.workaround.noautofocus = 1
# default value of brightness
settings.display.brightness=143
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.ringtone=Innovation.mp3
ro.config.notification_sound=Color.mp3
ro.config.alarm_sound=Light.mp3
ro.config.cal_notification=Vector.mp3
ro.config.msg_notification=Ascend.mp3
ro.com.google.clientidbase=android-htc
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.setupwizard.mode=DISABLED
ro.config.sync=yes
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Link: http://www.androidiani.com/~web14_repository/nk02/tatoo_1.65.405.1_dump.zip
Click to expand...
Click to collapse
i need 10 chars so there it is

google unyaffs, download it, make it executable (chmod a+x), put it in one of your binary path directories, then mkdir system, mv system.img system, cd system, and unyaffs system.img, done!

Thanks, Jubeh, knew about unyaffs but I was missing the chmod part, finally got the system.img extracted.

yeah, the one disadvantage to ignoring file extensions

jubeh said:
google unyaffs, download it, make it executable (chmod a+x), put it in one of your binary path directories, then mkdir system, mv system.img system, cd system, and unyaffs system.img, done!
Click to expand...
Click to collapse
i gave up on windows and got my macbook last night and got it all unyaffed
now if only i knew about structuring of files in android so that i could merge tattoo with a 1.6 build to run or port it

Zarboz said:
i gave up on windows and got my macbook last night and got it all unyaffed
now if only i knew about structuring of files in android so that i could merge tattoo with a 1.6 build to run or port it
Click to expand...
Click to collapse
Can you post how to use unyaffs on mac

The easy way is to replace the /framework and /app folders into a working hero port, though problems could ensue due to differenced in libraries, so merging /lib is also a good idea.
Personally, I'd like to know what every file does and which lib apps depend on. The builds I've made before usually contain unused libraries that I don't remove because I don't know where they're needed and proper documentation is not available outside the source.
What I think you need to do is take the build, then merge the HTC provided proprietaries, and then use the rest of the libs with their corresponding boot.img (as they're created during compilation and depend on that particular kernel)
Again, I really wish I knew what all libs do (I think I know about 30% of them on a stock build)

....double post...aghhhh

ebg10 said:
Can you post how to use unyaffs on mac
Click to expand...
Click to collapse
boot linux on it
jubeh said:
The easy way is to replace the /framework and /app folders into a working hero port, id have to merge the lib folder from cyanogensmod with the corresponding 4.1.11.1 kernel right?though problems could ensue due to differenced in libraries, so merging /lib is also a good idea.
Personally, I'd like to know what every file does and which lib apps depend on. The builds I've made before usually contain unused libraries that I don't remove because I don't know where they're needed and proper documentation is not available outside the source.
What I think you need to do is take the build, then merge the HTC provided proprietaries, and then use the rest of the libs with their corresponding boot.img (as they're created during compilation and depend on that particular kernel)
Again, I really wish I knew what all libs do (I think I know about 30% of them on a stock build)
Click to expand...
Click to collapse
i know i need a file heirarchy
thats why i sat last night and compared a BARE BONES 1.6 build Cyanogens 1.6 and Tattoo and Hero.
i was pretty blazed soo i got bored REAL fast but i did have the mash of ion1.6hero boot just no images and stuck in boot loop and adb couldnt read the log (prolly due to drivers i merged without knowing)
I would WORSHIP someone if they can come up with a "guide" if you would of what apks correspond with what libs to assist in such merging efforts or porting efforts
like i outlined in my post in sapphire the idea is
1.6 framework + Rosie + hero + some blur effects (bouncy menu and screen transitions)
and the corresponding Tattoo apps that are portable and the ones that arent can be replaced with hero apps
this thread can be trashed
link to my porting project thread any input will be gladly taken
http://forum.xda-developers.com/showthread.php?t=566501

so where's the yiffing?

Related

[To Dev] Tatoo dump: HTC Sense on android 1.6

Hi! I'm uploading a zip with img from tatoo wwe 1.65.405.1 rom, i've no time to try to pack a rom for magic/dream (and i prefer original android, not htc !)
This is the build.prop
Code:
ro.ril.ecc.HTC-WWE=999
ro.ril.ecc.HTC-Russia=01,02,03,04,001,002,003,004
ro.ril.ecc.HTC-EastEurope=92,93,94
ro.ril.enable.a52.HTC-ITA=1
ro.ril.enable.a53.HTC-ITA=1
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=DRC79
ro.build.display.id=DRC79
ro.build.version.incremental=70570
ro.build.version.sdk=4
ro.build.version.codename=REL
ro.build.version.release=1.6
ro.build.date=Thu Sep 24 20:56:07 CST 2009
ro.build.date.utc=1253796967
ro.build.type=user
ro.build.user=u70000
ro.build.host=Android-X03
ro.build.tags=release-keys
ro.product.model=HTC Tattoo
ro.product.brand=htc_wwe
ro.product.name=htc_tattoo
ro.product.device=bahamas
ro.product.board=bahamas
ro.product.cpu.abi=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=
ro.product.locale.region=
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product=bahamas
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=1.65.405.1 CL#70570 release-keys
ro.build.changelist=70570
ro.build.modelid=CLIC*****
ro.build.fingerprint=htc_wwe/htc_tattoo/bahamas/bahamas:1.6/DRC79/70570:user/release-keys
ro.product.version=1.65.405.1
keyguard.no_require_sim=1
# end build properties
#
# system.prop for device
#
rild.libpath=/system/lib/libhtc_ril.so
ro.ril.hep = 1
ro.ril.enable.dtm = 1
ro.ril.gprsclass = 12
ro.ril.hsdpa.category = 8
ro.ril.hsxpa = 1
wifi.interface = tiwlan0
ro.ril.htcmaskw1.bitmask = 4294967295
ro.ril.htcmaskw1 = 14449
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 45
# density in DPI of the LCD of this board. This is used to scale the UI
# appropriately. If this property is not defined, the default value is 160 dpi.
ro.sf.lcd_density = 120
# ro.sf.lcd_density = 160
ro.com.google.locationfeatures=1
# View configuration for QVGA
view.fading_edge_length = 8
view.touch_slop = 15
view.minimum_fling_velocity = 25
view.scroll_friction = 0.008
# For SD storage insert notification sound
persist.service.mount.playsnd = 0
# For the agps default value
ro.ril.def.agps.mode = 2
# For no auto focus devices
ro.workaround.noautofocus = 1
# default value of brightness
settings.display.brightness=143
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.ringtone=Innovation.mp3
ro.config.notification_sound=Color.mp3
ro.config.alarm_sound=Light.mp3
ro.config.cal_notification=Vector.mp3
ro.config.msg_notification=Ascend.mp3
ro.com.google.clientidbase=android-htc
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.setupwizard.mode=DISABLED
ro.config.sync=yes
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Link: http://www.androidiani.com/~web14_repository/nk02/tatoo_1.65.405.1_dump.zip

nk02 said:
Hi! I'm uploading a zip with img from tatoo wwe 1.65.405.1 rom, i've no time to try to pack a rom for magic/dream (and i prefer original android, not htc !)
This is the build.prop
Code:
ro.ril.ecc.HTC-WWE=999
ro.ril.ecc.HTC-Russia=01,02,03,04,001,002,003,004
ro.ril.ecc.HTC-EastEurope=92,93,94
ro.ril.enable.a52.HTC-ITA=1
ro.ril.enable.a53.HTC-ITA=1
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=DRC79
ro.build.display.id=DRC79
ro.build.version.incremental=70570
ro.build.version.sdk=4
ro.build.version.codename=REL
ro.build.version.release=1.6
ro.build.date=Thu Sep 24 20:56:07 CST 2009
ro.build.date.utc=1253796967
ro.build.type=user
ro.build.user=u70000
ro.build.host=Android-X03
ro.build.tags=release-keys
ro.product.model=HTC Tattoo
ro.product.brand=htc_wwe
ro.product.name=htc_tattoo
ro.product.device=bahamas
ro.product.board=bahamas
ro.product.cpu.abi=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=
ro.product.locale.region=
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product=bahamas
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=1.65.405.1 CL#70570 release-keys
ro.build.changelist=70570
ro.build.modelid=CLIC*****
ro.build.fingerprint=htc_wwe/htc_tattoo/bahamas/bahamas:1.6/DRC79/70570:user/release-keys
ro.product.version=1.65.405.1
keyguard.no_require_sim=1
# end build properties
#
# system.prop for device
#
rild.libpath=/system/lib/libhtc_ril.so
ro.ril.hep = 1
ro.ril.enable.dtm = 1
ro.ril.gprsclass = 12
ro.ril.hsdpa.category = 8
ro.ril.hsxpa = 1
wifi.interface = tiwlan0
ro.ril.htcmaskw1.bitmask = 4294967295
ro.ril.htcmaskw1 = 14449
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 45
# density in DPI of the LCD of this board. This is used to scale the UI
# appropriately. If this property is not defined, the default value is 160 dpi.
ro.sf.lcd_density = 120
# ro.sf.lcd_density = 160
ro.com.google.locationfeatures=1
# View configuration for QVGA
view.fading_edge_length = 8
view.touch_slop = 15
view.minimum_fling_velocity = 25
view.scroll_friction = 0.008
# For SD storage insert notification sound
persist.service.mount.playsnd = 0
# For the agps default value
ro.ril.def.agps.mode = 2
# For no auto focus devices
ro.workaround.noautofocus = 1
# default value of brightness
settings.display.brightness=143
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.ringtone=Innovation.mp3
ro.config.notification_sound=Color.mp3
ro.config.alarm_sound=Light.mp3
ro.config.cal_notification=Vector.mp3
ro.config.msg_notification=Ascend.mp3
ro.com.google.clientidbase=android-htc
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.setupwizard.mode=DISABLED
ro.config.sync=yes
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Link will avaible in 25minutes
Click to expand...
Click to collapse
Sweet! Thanks For this, now If I could just get my Hands on the Moto Cliq Dump system.img

Thanks for the tatoo dump.

Thanks
1) Is this ROM should work faster on 32B than all other Hero's ROMs?
2) Is this ROM have Exchange support on it?

Please, some guidance with this
many thanks

avimak said:
Thanks
1) Is this ROM should work faster on 32B than all other Hero's ROMs?
2) Is this ROM have Exchange support on it?
Click to expand...
Click to collapse
as far as I understand, this is a raw system dump, nothing to flash atm.

free-sidux said:
as far as I understand, this is a raw system dump, nothing to flash atm.
Click to expand...
Click to collapse
It is, DO NOT FLASH THIS!!!!
The crazy good devs round here will get it workin in no time. Just wait a day or two aaha. niice, thanks for the dump!

as soon as i finish downloading my JDK i can get the emulator to boot and do "adb pull system" and port from there
::edit:: its gunna be a while i cant find my boot.img unpacker.....
found it woot gunna just boot my roomys laptop into ubuntu .... and unyaffs these other folders
t minues 2 hours on my jdk download damn tethering and 2 bars of 3g service

donut 1.6 + sense ... wow !

i give up i had a couple ideas to merge the framework to get her to boot and i cant get it to work
i dont think i know enough about android to be attempting this but it was fun none the less
good luck to whomever gets her done

Patience, certainly one of the experienced chefs will prepare for us rom based on this dumpRegards

sardoid said:
Patience, certainly one of the experienced chefs will prepare for us rom based on this dumpRegards
Click to expand...
Click to collapse
from what im seeing inside some of the apks and stuff were gunna have to change out drawables for the apk.s because i dunno if 1.6 is backwords compatible with 1.5 apks
tried lots of mashup ideas and still no bueno....
*is thinking of a good way to maybe mash this to boot it*

Donut is indeed backward compatible. Got 1.6 on my magic and testing it quite vigorously.

cant wait for flash-able donut rom with sense

i like the new htc boot screen with the androids gonna rip it out of this and try to flash with kings 1.8

jroid said:
i like the new htc boot screen with the androids gonna rip it out of this and try to flash with kings 1.8
Click to expand...
Click to collapse
theres already a build in dream forum that has this scaled to fit mt3g/dream screen resolutions or you can download my tattoo port in progress and steal it from there should be scaled properly

Really Thanks !
I'm working on it

Just a simple resized version here
http://www.sendspace.com/file/vgdxj4

redglasses said:
Just a simple resized version here
http://www.sendspace.com/file/vgdxj4
Click to expand...
Click to collapse
yepppp
thanks brother

[Flash SBF] T Mobile Germany 3.4.2_179-6.1

T Mobile Germany new froyo 2.2.2
Target SW:
JRDNEM_U3_3.4.2_179-6.1
Full SBF name ::JRDNEM_U3_3.4.2_179-6.1_TMNAB_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PD S03C_USAJRDNFRYOTMDE_P016_A013_M005_HWp3_Service1FF.sbf
Links :: for full SBF
http://www.multiupload.com/ABLMD2KXK4
Rooted nandroid
http://forum.xda-developers.com/showpost.php?p=15825316&postcount=13

someone upload the nandroid for 3.4.2_179-6.1
Thanks walter .. http://forum.xda-developers.com/showpost.php?p=15825316&postcount=13

build prop
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=3.4.2-179
ro.build.display.id=JOREM_U3_3.4.2_179-6.1
ro.build.version.incremental=1305792415
ro.build.version.sdk=8
ro.build.version.codename=REL
ro.build.version.release=2.2.2
ro.build.date=Thu May 19 14:40:56 CST 2011
ro.build.date.utc=1305787256
ro.build.type=user
ro.build.user=fdc376
ro.build.host=zch68lnxdroid12
ro.build.tags=release-keys
ro.product.model=MB525
ro.product.brand=MOTO
ro.product.name=MB525_TMDE
ro.product.device=umts_jordan
ro.product.board=jordan
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=motorola
ro.product.locale.language=de
ro.product.locale.region=DE
ro.wifi.channels=
ro.board.platform=omap3
# ro.build.product is obsolete; use ro.product.device
ro.build.product=jordan_emara
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=umts_jordan-user 2.2.2 JOREM_U3_3.4.2_179-6.1 release-keys
ro.build.fingerprint=MOTO/MB525_TMDE/umts_jordan/jordan:2.2.2/3.4.2-179/1305792415:user/release-keys
# end build properties
#
# system.prop for UMTS Jordan
#
rild.libpath=/system/lib/librilswitch.so
rilswitch.vendorlibpath=/system/lib/libril-moto-umts-1.so
rilswitch.ganlibpath=/system/lib/libganril.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=240
ro.default_usb_mode=0
# wlan interface
wifi.interface = tiwlan0
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 45
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# This is a high density device with more memory, so larger vm heaps for it.
dalvik.vm.heapsize=30m
# System property for SMC
ro.service.start.smc=1
#proximit sensor screen off delay
mot.proximity.delay=450
#proximit sensor disable touch distance
mot.proximity.distance=60
#doesn't use Java DNS cache. Use only bionic cache.
networkaddress.cache.ttl=0
# BEGIN Motorola, drmn68, 13-July-2010, IKSTABLEONE-729
# true when phone launches UI successfully, default is flase
sys.mot.ui.launched=false
# END IKSTABLEONE-729
# BEGIN Motorola, wlss01, 15-Sept-2010, IKNAMERCOM-2241
# Port IKSTABLETWO-7241 Master clear is taking more then 30 minutes
ro.mot.master_clear.shredsd = false
# END IKNAMERCOM-2241
# BEGIN IKJORDANFR-65 Motorola, fpx478, default Mobile Hotspot is on
ro.mot.mynet=true
# END IKJORDANFR-65
# IKJORDAN-3341
windowsmgr.max_events_per_sec=70
#IKSHADOW-4638
# This defines the min duration between two pointer event in ms
ro.min_pointer_dur=10
# BEGIN, Motorola, qwp843, 12/06/2010, IKJRDNEM-3696
# Handle No audible indication while capturing photos in silent mode
# The property "ro.camera.sound.forced" is defined by google.
# Use "ro.camera.sound.forced" to decide whether camera shutter tone is forced: 1 forced; 0 not-forced.
ro.camera.sound.forced=0
# END IKJRDNEM-3696
# 33830, 33925, 33926. Terminal Download Feature. T-Mo Url
ro.mot.portal.url=http://home.web2go.com/
#vvm activity log and dialer.
ro.mot.vvm_enable=0
ro.mot.vvm_editable=1
#IKMAP-7365 BatteryManager: Wi-Fi control to be made flexible
ro.mot.battmanager.wifictrl=0
#IKJORDAN-1087(IKBASIL-804) use new generic UA profile
ro.mot.hw.uaprof=http://uaprof.motorola.com/phoneconfig/MotoMB525/profile/MotoMB525.rdf
ro.mot.fid.34081.enable=false
#IKJRDNEMFR-14 extract artwork from ID3V2 box for 3gp files
ro.mot.id3v2.artwork.enable=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
gsm.sim.mot.simswap=1
ro.config.ringtone=EtherShake.ogg
ro.mot.battmanager.wifictrl=0
ro.mot.hw.ringerswitch=0
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
media.stagefright.enable-player=false
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=false
ro.default_usb_mode=0
ro.com.google.gmsversion=2.2_r9
ro.media.camcorder.vga=3gp,h264,24,4000000,aac,96000,44100,2
ro.media.camcorder.cif=3gp,h264,24,1500000,aac,96000,44100,2
ro.media.camcorder.qvga=3gp,h264,15,500000,aac,32000,16000,2
ro.media.camcorder.mms=3gp,h264,15,128000,amrnb,12200,8000,1
ro.media.camcorder.mmsres=qvga
ro.media.enc.aud.fileformat=amr
ro.media.enc.aud.codec=amrnb
ro.media.enc.aud.bps=12200
ro.media.enc.aud.ch=1
ro.media.enc.aud.hz=8000
ro.media.capture.maxres=5m
ro.media.capture.flash=led
ro.media.capture.classification=classH
ro.media.capture.flip=horizontalandvertical
ro.media.capture.flashIntensity=41
ro.media.capture.torchIntensity=25
ro.media.capture.shuttertone=1
ro.media.capture.panorama=0
ro.media.camerapreview.reg=480x360
ro.media.camerapreview.wide=848x480
ro.camcorder.VideoModes=false
ro.camera.DynamicFocus=false
ro.blur.setupprovider.tmo=true
ro.blur.setup.silent=false
gsm.sim.mot.simswap=1
ro.com.motorola.smartsensor=true
ro.mot.setuptype=1
ro.vf360_features.enabled=false
ro.blur_carrier_vodafone=false
ro.blur_carrier_tmo=true
ro.setupwizard.mode=DISABLED
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.mot.dpmext=true
ro.build.svn=52
ro.mot.hw.crystaltalk=1
ro.com.google.clientid=android-motorola
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.mot.hw.uaprof=http://uaprof.motorola.com/phoneconfig/MotoMB200/profile/MotoMB200.rdf
ro.build.version.full=Blur_Version.34.906.1.MB525.T-Mobile.en.DE
ro.com.google.clientidbase.am=android-tmobile-{country}
ro.com.google.clientidbase=android-motorola
ro.com.google.clientidbase.gmm=android-motorola
ro.com.google.clientidbase.yt=android-motorola
ro.com.google.locationfeatures=1
ro.com.google.clientidbase.ms=android-tmobile-{country}

whats the kernel version?

Has Anybody tested is it better than the first german froyo. Iam not at home i cant tested it. Please share
Send from my brain using Tapatalk

im installing now.normal 179-2 rom is heating when 3g is open.i hope this rom dont heats.

this rom has blur.blur setup can skippable.
languages:
deutsch
english
espanol
français
italiano
netherlands
portugues

Ok i tried the sbf and IT is better than the first one its faster but the brightness doesnt work well. Its the best froyo i have tried now iam waiting for a bro that make a nice rom with This build yehaa
Send from my brain using Tapatalk

Got 1300 with Quadrant with This Setvsel settings 20/300 32/600 42/800 its very fast yay
Send from my brain using Tapatalk

anyone know if this is the same as uk 2.2 update?

rachit2588 said:
T Mobile Germany new froyo 2.2.2
Target SW:
JRDNEM_U3_3.4.2_179-6.1
Full SBF name ::JRDNEM_U3_3.4.2_179-6.1_TMNAB_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PD S03C_USAJRDNFRYOTMDE_P016_A013_M005_HWp3_Service1FF.sbf
Links :: for full SBF
http://www.multiupload.com/ABLMD2KXK4
nandroid + fixed ????
Click to expand...
Click to collapse
I will build rooted Nandroid backup today.

Thanks @walter79 xD

ROOTED NANDROID BACKUP
http://www.multiupload.com/1SFPP4XZML
Install:
- start CWM
- run backup/restore
- run advance restore
- restore only system
- flash fixed sbf
Did not test the nandroid.
Could someone test it please.

Can I install this nandroid backup on my 2.2.2 CEE device?

Unfortunately, the link you have clicked is not available.

[ROM]Defy+ 2.3.4-134 DFP 74, blur, 720p,panorama, 1%

!!!DEFY+ user please only restore system!!!
No support for this rom by walter79
Nandroid backup posted on android-hilfe.de
WALTER79 edition (deodexed, 720p, panorama, 1% battery, lgcamera):
- Language: en, ger, es,it,nl
- "apps removed: 7digital, cardiotrainer, zinio"
BUGS
- advanced restore = MD5 dismatch --> reinstall bootmenu use 2nd-Init from Market
system version: 45.0.74.MB526.Retail.en.DE
Build: 4.5.1-134 DFP 74 (original Defy+) Original backup http://www.android-hilfe.de/2048057-post2.html
big thanks to tynnvyr from android-hilfe
Build date: 11. aug. 2011 by Motorola
DOWNLOAD Mirror 2 (MS-skydrive) /MobilePhone/MotorolaDefy/CustomRoms/4.5.1-134 DFP 74
To begin:
Put the Nandroid backup folder 4.5.1-134walter on the SDCard in this folder:
Code:
/sdcard/clockworkmod/backup
Installation for red lens:
Install official FroYo (if you have CM7, Miui, or any other rooted Eclair, Froyo, Gingerbread with 2nd-init enabled rom go to step 4)
After setting up FroYo, root it.
Install CWM via 2nd-init from market.
reboot and run 2nd-init (voldown on blue LED)
Go to "Recovery"
Go to "Custom Recovery"
Go to "Wipe data"
Go to "Backup and Restore"
Go to "Restore"
Select "4.5.1-134walter" and confirm
reboot. You should get stuck in a black screen.
Flash the FixedSBF now (pull battery --> go to bootoloader VOLUP+Power, flash /defy/fixed-sbf via RSD-lite)
After this process is finished the phone should reboot. Booting up can take a while, max is about 10 minutes.
Charge your phone to 100% and keep it charging for an hour after.
Calibrate your battery using the batterycalibration from market
Insall method with SOC green camera
1. Start from 2.2 Froyo (I use JRDNEM_U3_3.4.2_179-002_DEBLUR_CEE.sbf)
2. Root it.
3. Install CWM via 2nd-init from market. Put 4.5.1-134walter folder from this to /sdcard/clockworkmod/backup
4. reboot to recovery -> custom -> wipe data -> restore -> 4.5.1-134walter
5. reboot and press power+vol up for bootloader
6. Flash 4.5.3-109-fixed.sbf (first start takes several minutes)
7. Go back to recovery, wipe cache and dalvik and install Greenbreadmod 1.1
8. (wipe cache and dalvik) and install NEW_3D-fix_customization
9. (wipe cache and dalvik and reboot)
720p record and play, panorama patch View attachment 720p-panorama-defy-plus.zip
BUILD.PROP
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=4.5.1-134_DFP-74
ro.build.display.id=4.5.1-134_DFP-74
ro.build.version.incremental=1313117579
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.4
ro.build.date=Thu Aug 11 07:17:24 CDT 2011
ro.build.date.utc=1313065044
ro.build.type=user
ro.build.user=hudsoncm
ro.build.host=il93lnxdroid52
ro.build.tags=release-keys
ro.product.model=MB526
ro.product.brand=MOTO
ro.product.name=MB526_RTDACH
ro.product.device=umts_jordan
ro.product.board=jordan
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=motorola
ro.product.locale.language=de
ro.product.locale.region=DE
ro.wifi.channels=
ro.board.platform=omap3
# ro.build.product is obsolete; use ro.product.device
ro.build.product=jordan_emara
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=umts_jordan_emara-user 2.3.4 4.5.1-134_DFP-74 1313117579 release-keys
ro.build.fingerprint=MOTO/MB526_RTDACH/umts_jordan:2.3.4/4.5.1-134_DFP-74/1313117579:user/release-keys
# end build properties
#
# system.prop for UMTS Jordan
#
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=240
ro.default_usb_mode=0
# wlan interface
wifi.interface = tiwlan0
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 45
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# This is a high density device with more memory, so larger vm heaps for it.
dalvik.vm.heapsize=32m
# System property for SMC
ro.service.start.smc=1
#proximit sensor screen off delay
mot.proximity.delay=450
#proximit sensor disable touch distance
mot.proximity.distance=60
#doesn't use Java DNS cache. Use only bionic cache.
networkaddress.cache.ttl=0
# BEGIN Motorola, drmn68, 13-July-2010, IKSTABLEONE-729
# true when phone launches UI successfully, default is flase
sys.mot.ui.launched=false
# END IKSTABLEONE-729
# BEGIN IKJORDANFR-65 Motorola, fpx478, default Mobile Hotspot is on
ro.mot.mynet=true
# END IKJORDANFR-65
# BEGIN Motorola, IKSTABLEFOURV-9197/9803/10119, IKPRODFOURV-168/453
ro.mot.bindervm.config=123
# END IKSTABLEFOURV-9197/9803/10119, IKPRODFOURV-168/453
# IKJORDAN-3341
windowsmgr.max_events_per_sec=70
#IKSHADOW-4638
# This defines the min duration between two pointer event in ms
ro.min_pointer_dur=10
# BEGIN, Motorola, qwp843, 12/06/2010, IKJRDNEM-3696
# Handle No audible indication while capturing photos in silent mode
# The property "ro.camera.sound.forced" is defined by google.
# Use "ro.camera.sound.forced" to decide whether camera shutter tone is forced: 1 forced; 0 not-forced.
ro.camera.sound.forced=0
# END IKJRDNEM-3696
#
# ADDITIONAL_BUILD_PROPERTIES
#
gsm.sim.mot.simswap=1
ro.config.ringtone=EtherShake.ogg
ro.mot.battmanager.wifictrl=0
ro.mot.hw.ringerswitch=0
rild.libpath=/system/lib/libril-moto-umts-1.so
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.default_usb_mode=0
ro.com.google.gmsversion=2.3_r5
ro.media.camcorder.vga=3gp,h264,24,4000000,aac,96000,44100,2
ro.media.camcorder.cif=3gp,h264,24,1500000,aac,96000,44100,2
ro.media.camcorder.qvga=3gp,h264,15,500000,aac,32000,16000,2
ro.media.camcorder.mms=3gp,h264,15,128000,amrnb,12200,8000,1
ro.media.camcorder.mmsres=qvga
ro.media.enc.aud.fileformat=amr
ro.media.enc.aud.codec=amrnb
ro.media.enc.aud.bps=12200
ro.media.enc.aud.ch=1
ro.media.enc.aud.hz=8000
ro.media.capture.maxres=5m
ro.media.capture.classification=classH
ro.media.capture.flip=horizontalandvertical
ro.media.capture.flash=led
ro.media.capture.flashIntensity=41
ro.media.capture.torchIntensity=25
ro.media.capture.shuttertone=1
ro.media.sensor.orient=90
ro.media.capture.panorama=0
ro.media.camerapreview.reg=480x360
ro.media.camerapreview.wide=848x480
ro.media.capture.slow.fps=60
ro.media.capture.fast.fps=4
ro.camcorder.VideoModes=false
ro.camera.DynamicFocus=false
media.stagefright.enable-record=false
media.stagefright.enable-rtsp=false
ro.blur.setupprovider.tmo=false
ro.blur.setup.silent=false
gsm.sim.mot.simswap=1
ro.com.motorola.smartsensor=true
ro.vf360_features.enabled=false
ro.blur_carrier_vodafone=false
ro.blur_carrier_tmo=false
ro.setupwizard.mode=DISABLED
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.mot.dpmext=true
ro.build.svn=01
ro.mot.hw.crystaltalk=1
ro.com.google.clientid=android-motorola
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.mot.hw.uaprof=http://uaprof.motorola.com/phoneconfig/motomb526/Profile/motomb526.rdf
ro.build.version.full=Blur_Version.45.0.74.MB526.Retail.en.DE
ro.mot.hidden_keyboards=evfwd
ro.com.google.clientidbase.am=android-motorola
ro.com.google.clientidbase=android-motorola
ro.com.google.clientidbase.gmm=android-motorola
ro.com.google.clientidbase.yt=android-motorola
ro.com.google.locationfeatures=1
ro.com.google.clientidbase.ms=android-motorola

w8 for the result walter

...................

bether said:
...................
Click to expand...
Click to collapse
i think it is already rooted if its a nandroid backup

On red lens everything works.
But it need some patches. 720p, panorma, etc ...
The rom is like 4.5.1-134 beta.
realy old rom. Build Date: 11. aug. 2011

if we got green lense shall we use the greenbread mod?

Does it come with motoBLUR?

Cristi_10 said:
if we got green lense shall we use the greenbread mod?
Click to expand...
Click to collapse
Try first without greenbread.
boonhoong said:
Does it come with motoBLUR?
Click to expand...
Click to collapse
yes full blur.

Please help to post build.prop. Thank you!

Everything works fine, but no 720p and it has very bright buttons

boonhoong said:
Please help to post build.prop. Thank you!
Click to expand...
Click to collapse
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=4.5.1-134_DFP-74
ro.build.display.id=4.5.1-134_DFP-74
ro.build.version.incremental=1313117579
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.4
ro.build.date=Thu Aug 11 07:17:24 CDT 2011
ro.build.date.utc=1313065044
ro.build.type=user
ro.build.user=hudsoncm
ro.build.host=il93lnxdroid52
ro.build.tags=release-keys
ro.product.model=MB526
ro.product.brand=MOTO
ro.product.name=MB526_RTDACH
ro.product.device=umts_jordan
ro.product.board=jordan
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=motorola
ro.product.locale.language=de
ro.product.locale.region=DE
ro.wifi.channels=
ro.board.platform=omap3
# ro.build.product is obsolete; use ro.product.device
ro.build.product=jordan_emara
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=umts_jordan_emara-user 2.3.4 4.5.1-134_DFP-74 1313117579 release-keys
ro.build.fingerprint=MOTO/MB526_RTDACH/umts_jordan:2.3.4/4.5.1-134_DFP-74/1313117579:user/release-keys
# end build properties
#
# system.prop for UMTS Jordan
#
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=240
ro.default_usb_mode=0
# wlan interface
wifi.interface = tiwlan0
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 45
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# This is a high density device with more memory, so larger vm heaps for it.
dalvik.vm.heapsize=32m
# System property for SMC
ro.service.start.smc=1
#proximit sensor screen off delay
mot.proximity.delay=450
#proximit sensor disable touch distance
mot.proximity.distance=60
#doesn't use Java DNS cache. Use only bionic cache.
networkaddress.cache.ttl=0
# BEGIN Motorola, drmn68, 13-July-2010, IKSTABLEONE-729
# true when phone launches UI successfully, default is flase
sys.mot.ui.launched=false
# END IKSTABLEONE-729
# BEGIN IKJORDANFR-65 Motorola, fpx478, default Mobile Hotspot is on
ro.mot.mynet=true
# END IKJORDANFR-65
# BEGIN Motorola, IKSTABLEFOURV-9197/9803/10119, IKPRODFOURV-168/453
ro.mot.bindervm.config=123
# END IKSTABLEFOURV-9197/9803/10119, IKPRODFOURV-168/453
# IKJORDAN-3341
windowsmgr.max_events_per_sec=70
#IKSHADOW-4638
# This defines the min duration between two pointer event in ms
ro.min_pointer_dur=10
# BEGIN, Motorola, qwp843, 12/06/2010, IKJRDNEM-3696
# Handle No audible indication while capturing photos in silent mode
# The property "ro.camera.sound.forced" is defined by google.
# Use "ro.camera.sound.forced" to decide whether camera shutter tone is forced: 1 forced; 0 not-forced.
ro.camera.sound.forced=0
# END IKJRDNEM-3696
#
# ADDITIONAL_BUILD_PROPERTIES
#
gsm.sim.mot.simswap=1
ro.config.ringtone=EtherShake.ogg
ro.mot.battmanager.wifictrl=0
ro.mot.hw.ringerswitch=0
rild.libpath=/system/lib/libril-moto-umts-1.so
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.default_usb_mode=0
ro.com.google.gmsversion=2.3_r5
ro.media.camcorder.vga=3gp,h264,24,4000000,aac,96000,44100,2
ro.media.camcorder.cif=3gp,h264,24,1500000,aac,96000,44100,2
ro.media.camcorder.qvga=3gp,h264,15,500000,aac,32000,16000,2
ro.media.camcorder.mms=3gp,h264,15,128000,amrnb,12200,8000,1
ro.media.camcorder.mmsres=qvga
ro.media.enc.aud.fileformat=amr
ro.media.enc.aud.codec=amrnb
ro.media.enc.aud.bps=12200
ro.media.enc.aud.ch=1
ro.media.enc.aud.hz=8000
ro.media.capture.maxres=5m
ro.media.capture.classification=classH
ro.media.capture.flip=horizontalandvertical
ro.media.capture.flash=led
ro.media.capture.flashIntensity=41
ro.media.capture.torchIntensity=25
ro.media.capture.shuttertone=1
ro.media.sensor.orient=90
ro.media.capture.panorama=0
ro.media.camerapreview.reg=480x360
ro.media.camerapreview.wide=848x480
ro.media.capture.slow.fps=60
ro.media.capture.fast.fps=4
ro.camcorder.VideoModes=false
ro.camera.DynamicFocus=false
media.stagefright.enable-record=false
media.stagefright.enable-rtsp=false
ro.blur.setupprovider.tmo=false
ro.blur.setup.silent=false
gsm.sim.mot.simswap=1
ro.com.motorola.smartsensor=true
ro.vf360_features.enabled=false
ro.blur_carrier_vodafone=false
ro.blur_carrier_tmo=false
ro.setupwizard.mode=DISABLED
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.mot.dpmext=true
ro.build.svn=01
ro.mot.hw.crystaltalk=1
ro.com.google.clientid=android-motorola
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.mot.hw.uaprof=http://uaprof.motorola.com/phoneconfig/motomb526/Profile/motomb526.rdf
ro.build.version.full=Blur_Version.45.0.74.MB526.Retail.en.DE
ro.mot.hidden_keyboards=evfwd
ro.com.google.clientidbase.am=android-motorola
ro.com.google.clientidbase=android-motorola
ro.com.google.clientidbase.gmm=android-motorola
ro.com.google.clientidbase.yt=android-motorola
ro.com.google.locationfeatures=1
ro.com.google.clientidbase.ms=android-motorola

Sigray said:
Everything works fine, but no 720p and it has very bright buttons
Click to expand...
Click to collapse
// Bayer vagy SOC modulos a telefonod? Thanks

i installed greenbread for green lense iand the battery indicator doesnt show anymore the battery level its showing a question mark.its a bug?

Cristi_10 said:
i installed greenbread for green lense iand the battery indicator doesnt show anymore the battery level its showing a question mark.its a bug?
Click to expand...
Click to collapse
replace /system/battd with one from froyo or cm7

720p record with my own patches did not work.
edit works only with LGCAMERA.
720p patch:View attachment defy-defy+720p-record-and-play.zip

walter79 said:
720p record with my own patches did not work.
edit works only with LGCAMERA.
720p patch:View attachment 737111
Click to expand...
Click to collapse
DVD mode is working with stock camera.
Is it possible to make a 720p patch for the stock camera?

Sigray said:
DVD mode is working with stock camera.
Is it possible to make a 720p patch for the stock camera?
Click to expand...
Click to collapse
BlurCamera.apk is the problem.
I will deodex the rom and test BlurCamera form 4.5.1-134 beta rom.

walter79 said:
replace /system/battd with one from froyo or cm7
Click to expand...
Click to collapse
that solved the problem thx

Cristi_10 said:
that solved the problem thx
Click to expand...
Click to collapse
Could you try to 720p patch after greenbread?

Later i will upload a deodexed version included 720p patch maybe 1% battery.
edit service.jar for 1% is working.
Will do some cleaning and upload the new nandroid backup

[9001][Recovery] Fixed FeaMod V1.4 [FINAL PROPER] [No BootLoops] [NonOC] [NonUV]

This is a fixed version of manveru0's FeaMod recovery V1.4 (aka CWM recovery v 5.5.0.4) so all credits go to him.
Disclaimer: this piece of software is not for the unexperienced and might bring you in a situation you can't resolve yourself. So don't use it if you fear the potential danger of bricking your device. I am responsible for nothing related to this piece of software and therefore won't help. If you decide to use it anyway you agree to be ultimately responsible for all consequences that may occur. So you have been warned !
Terms of use: Remember the power of reading ! If you can't find some particular information on the first page use the search function, it is your best friend.
Besides there are even guides and tutorials all over the forum and in most cases your question was already answered.
If you take a moment and read through the WHOLE post below and a few more moments to read some of all the stuff in other device related threads of this forum, you will find ALL you need just there.
It's not invisible so you CAN find it. And forum rules and good manners tell you to do it exactly like this. And I WILL ignore every question that is already answered here.
Obey the rules !
Recovery feature list
- the internally used kernel to boot CWM recovery is not overclocked and not undervolted and uses Samsung's stock kernel settings so it should work on any i9001 phone (it's different from manveru0's release and I already released this fix in January in the original FeaMod thread)
- reworked the integrated script in recovery startup sequence that takes care about the recovery reboot issue automatically so no more rebooting into recovery again and again once and for all (reported to work finally by wintel_mac, thanks for testing all releases)
- the CWM 5.5.0.4 recovery itself remains totally untouched and is the very same as in FeaMod V1.4; for any more information on that please refer to the original FeaMod thread here:
http://forum.xda-developers.com/showthread.php?t=1331164
- the package includes only the recovery image so anything else on your phone remains untouched including your boot kernel; the recovery partition has its own kernel integrated which is only used for booting CWM recovery, in all other cases your original kernel in the boot partition is used - primarily for booting android that is

This version is meant for use with ANY i9001 ROM including stock ROMs, custom ROMs and even AOSP ROMs as well (as soon as the latter are actually available)
Install instructions:
1. If you don't have already any CWM version (FeaMod Recovery) install V1.2 via Odin first. If you never heard of that learn all about it here:
http://forum.xda-developers.com/showthread.php?t=1331164
2. Now make a complete nandroid backup of your phone with CWM
3. Download the attached CWM zip package
4. Copy it to your internal sdcard
5. In CWM choose "install zip from sdcard", then "choose zip from internal sdcard"
6. Select the downloaded file "FeaModV1.4_Fixed_NoBootLoop_NonOC_NonUV.zip"
7. Confirm install with "Yes"
8. Wait till you see the message "Reboot to use Fixed FeaMod V1.4 !"
9. Do so like the message says.
10. On first reboot the fix to cure the recovery reboot wasn't yet executed so you will end up in recovery once again (if your phone is affected with that issue) !
11. So you have to reboot into system once again and from now on everything will be fine, promised That is if you installed it properly and exactly like described above.

If anything went wrong during install just try again.
If you can't boot into recovery anymore just install FeaMod 1.2 via Odin again.
If you want to install Fixed FeaMod V1.4 directly via odin just extract the recovery.img only from the zip file and tar it. Then flash it via Odin in one package mode. If you don't know how to do that refer to the flash guides in this i9001 subforum or use the above described method only. If you still can't handle anything of that don't use FeaMod/CWM at all, you will most probably brick your phone with it.
The experienced users (ONLY !!!) can also use dd of course to flash the recovery.img directly to the appropriate partition
If you got severe errors AND didn't make a backup because you knew better than the developer don't even dare to beg for help.
If you encounter any other errors report them here but be sure that this is no feature or problem that was already described above.

reserved...

reserved ...

Sorry, but I'm the show stopper... the phone still boots into recovery.
Still need to wipe mmcblk0p14 to get out of this loop

Thanks ! Works perfect for me
I dded the img

wintel_mac said:
Sorry, but I'm the show stopper... the phone still boots into recovery.
Still need to wipe mmcblk0p14 to get out of this loop
Click to expand...
Click to collapse
Ooops, this means the script isn't actually executed. Couldn't test it properly since my phone isn't affected by the issue. Will review that immediately.

Looks like im the wrong person to test this out
It always worked fine for me

nail16 said:
Thanks ! Works perfect for me
I dded the img
Click to expand...
Click to collapse
Which would mean the script works but the CWM install routine doesn't.
@wintelmac: can you please attach the default.prop file that shows up when you boot into recovery ?
Code:
adb shell "cat /default.prop" > default.prop

nail16 said:
Looks like im the wrong person to test this out
It always worked fine for me
Click to expand...
Click to collapse
Funny, couldn't you say that earlier ?

couldn't you refresh your page earlier ?
Should i post my last_log of the recovery ?

nail16 said:
couldn't you refresh your page earlier ?
Click to expand...
Click to collapse
no, because I was already in posting mode
nail16 said:
Should i post my last_log of the recovery ?
Click to expand...
Click to collapse
Won't help since you are not affected by the issue anyway. New version already uploaded, wintel_mac can test it now.

It's kinda funny your's and my phone are not effected by the recovery bug,
but you'r kernel still managed to screw up my sdcard

nail16 said:
It's kinda funny your's and my phone are not effected by the recovery bug,
but you'r kernel still managed to screw up my sdcard
Click to expand...
Click to collapse
Which only proves what I said: no two phones are exactly the same

Yep, here it is
Code:
C:\Users\User>adb shell
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
~ # cat /default.prop
cat /default.prop
#
# ADDITIONAL_DEFAULT_PROPERTIES
#
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.service.adb.enable=1
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=full_galaxysplus-eng 2.3.7 GINGERBREAD eng.root.20120216.035
237 test-keys
ro.build.version.incremental=eng.root.20120216.035237
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.7
ro.build.date=Thu Feb 16 04:20:00 CET 2012
ro.build.date.utc=1329362400
ro.build.type=eng
ro.build.user=root
ro.build.host=ANKObian
ro.build.tags=test-keys
ro.product.model=GT-I9001
ro.product.brand=Samsung
ro.product.name=full_galaxysplus
ro.product.device=galaxysplus
ro.product.board=qcom
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Samsung
ro.product.locale.language=hdpi
ro.product.locale.region=
ro.wifi.channels=
ro.board.platform=msm7x30
# ro.build.product is obsolete; use ro.product.device
ro.build.product=galaxysplus
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=full_galaxysplus-eng 2.3.7 GINGERBREAD eng.root.20120216.03
5237 test-keys
ro.build.fingerprint=Samsung/full_galaxysplus/galaxysplus:2.3.7/GINGERBREAD/eng.
root.20120216.035237:eng/test-keys
ro.cm.device=galaxysplus
# end build properties
#
# system.prop for galaxysplus
#
# from init.rc
#service.brcm.bt.srv_active=0
#service.brcm.bt.hcid_active=0
#service.brcm.fm.activation=0
#ro.rfkilldisabled=0
# from build.prop
#
# system.prop for surf
#
debug.sf.hw=1
dalvik.vm.heapsize=64m
ro.sf.lcd_density=240
#ro.dev.dmm=1
#dev.dmm.dpd.trigger_delay=30
#
# system props for the cne module
#
#persist.cne.UseCne=vendor
#persist.cne.bat.range.low.med=30
#persist.cne.bat.range.med.high=60
#persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
#persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
#persist.cne.bwbased.rat.sel=false
#persist.cne.snsr.based.rat.mgt=false
#persist.cne.bat.based.rat.mgt=false
#persist.cne.rat.acq.time.out=30000
#persist.cne.rat.acq.retry.tout=0
#
#lpa.decode=false
#ro.hdmi.enable=true
#
# system props for the data modules
#
#ro.use_data_netmgrd=true
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=16
#
# system props for the MM modules
#
#media.stagefright.enable-player=true
#media.stagefright.enable-meta=false
#media.stagefright.enable-scan=false
#media.stagefright.enable-http=true
#media.stagefright.enable-rtsp=false
# Samsung USB default mode
#persist.service.usb.setting=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
wifi.supplicant_scan_interval=15
#ro.secdevenc=true
dalvik.vm.dexopt-flags=m=y
#
# ADDITIONAL_BUILD_PROPERTIES
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d/dev/ttyS0
wifi.interface=eth0
ro.opengles.version=131072
ro.config.ehrpd=true
ro.telephony.ril_class=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
mobiledata.interfaces=pdp0,gprs,ppp0
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
keyguard.no_require_sim=true
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.kernel.android.checkjni=1
ro.setupwizard.mode=OPTIONAL
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
~ #

I'm still using you'r kernel with a dead sdcard inside my phone

nail16 said:
I'm still using you'r kernel with a dead sdcard inside my phone
Click to expand...
Click to collapse
Please, don't crosspost^^ It's about the recovery (which uses not even the skyhigh kernel), and not the kernel so it's simply uuuuuuseless here

wintel_mac said:
Yep, here it is
Click to expand...
Click to collapse
OK, that's the right one, so the install routine works. Which is actually the only part that I could test on my own phone and it worked properly
A new version is already online, can you test that please ?

nail16 said:
I'm still using you'r kernel with a dead sdcard inside my phone
Click to expand...
Click to collapse
Did you read this already ?
http://forum.xda-developers.com/showpost.php?p=24307493&postcount=213

Code:
V:\Downloads>adb push sky-new-recovery.img /emmc/flash-backup/
2174 KB/s (5083136 bytes in 2.283s)
V:\Downloads>adb shell
~ # mount /emmc
mount /emmc
~ # dd if=/emmc/flash-backup/sky-new-recovery.img of=/dev/block/mmcblk0p13
dd if=/emmc/flash-backup/sky-new-recovery.img of=/dev/block/mmcblk0p13
9928+0 records in
9928+0 records out
5083136 bytes (4.8MB) copied, 2.363983 seconds, 2.0MB/s
~ #
Rebootet... went back into CWM. Rebooted once more... CWM. And just another reboot (you may guess...) CWM.
Code:
~ # cat /default.prop
cat /default.prop
#
# ADDITIONAL_DEFAULT_PROPERTIES
#
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.service.adb.enable=1
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=full_galaxysplus-eng 2.3.7 GINGERBREAD eng.root.20120216.035
237 test-keys
ro.build.version.incremental=eng.root.20120216.035237
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.7
ro.build.date=Thu Feb 16 04:20:00 CET 2012
ro.build.date.utc=1329362400
ro.build.type=eng
ro.build.user=root
ro.build.host=ANKObian
ro.build.tags=test-keys
ro.product.model=GT-I9001
ro.product.brand=Samsung
ro.product.name=full_galaxysplus
ro.product.device=galaxysplus
ro.product.board=qcom
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Samsung
ro.product.locale.language=hdpi
ro.product.locale.region=
ro.wifi.channels=
ro.board.platform=msm7x30
# ro.build.product is obsolete; use ro.product.device
ro.build.product=galaxysplus
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=full_galaxysplus-eng 2.3.7 GINGERBREAD eng.root.20120216.03
5237 test-keys
ro.build.fingerprint=Samsung/full_galaxysplus/galaxysplus:2.3.7/GINGERBREAD/eng.
root.20120216.035237:eng/test-keys
ro.cm.device=galaxysplus
# end build properties
#
# system.prop for galaxysplus
#
# from init.rc
#service.brcm.bt.srv_active=0
#service.brcm.bt.hcid_active=0
#service.brcm.fm.activation=0
#ro.rfkilldisabled=0
# from build.prop
#
# system.prop for surf
#
debug.sf.hw=1
dalvik.vm.heapsize=64m
ro.sf.lcd_density=240
#ro.dev.dmm=1
#dev.dmm.dpd.trigger_delay=30
#
# system props for the cne module
#
#persist.cne.UseCne=vendor
#persist.cne.bat.range.low.med=30
#persist.cne.bat.range.med.high=60
#persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
#persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
#persist.cne.bwbased.rat.sel=false
#persist.cne.snsr.based.rat.mgt=false
#persist.cne.bat.based.rat.mgt=false
#persist.cne.rat.acq.time.out=30000
#persist.cne.rat.acq.retry.tout=0
#
#lpa.decode=false
#ro.hdmi.enable=true
#
# system props for the data modules
#
#ro.use_data_netmgrd=true
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=16
#
# system props for the MM modules
#
#media.stagefright.enable-player=true
#media.stagefright.enable-meta=false
#media.stagefright.enable-scan=false
#media.stagefright.enable-http=true
#media.stagefright.enable-rtsp=false
# Samsung USB default mode
#persist.service.usb.setting=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
wifi.supplicant_scan_interval=15
#ro.secdevenc=true
dalvik.vm.dexopt-flags=m=y
#
# ADDITIONAL_BUILD_PROPERTIES
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d/dev/ttyS0
wifi.interface=eth0
ro.opengles.version=131072
ro.config.ehrpd=true
ro.telephony.ril_class=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
mobiledata.interfaces=pdp0,gprs,ppp0
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
keyguard.no_require_sim=true
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.kernel.android.checkjni=1
ro.setupwizard.mode=OPTIONAL
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
~ #

wintel_mac said:
Code:
V:\Downloads>adb push sky-new-recovery.img /emmc/flash-backup/
2174 KB/s (5083136 bytes in 2.283s)
V:\Downloads>adb shell
~ # mount /emmc
mount /emmc
~ # dd if=/emmc/flash-backup/sky-new-recovery.img of=/dev/block/mmcblk0p13
dd if=/emmc/flash-backup/sky-new-recovery.img of=/dev/block/mmcblk0p13
9928+0 records in
9928+0 records out
5083136 bytes (4.8MB) copied, 2.363983 seconds, 2.0MB/s
~ #
Rebootet... went back into CWM. Rebooted once more... CWM. And just another reboot (you may guess...) CWM.
Code:
~ # cat /default.prop
cat /default.prop
#
# ADDITIONAL_DEFAULT_PROPERTIES
#
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.service.adb.enable=1
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=full_galaxysplus-eng 2.3.7 GINGERBREAD eng.root.20120216.035
237 test-keys
ro.build.version.incremental=eng.root.20120216.035237
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.7
ro.build.date=Thu Feb 16 04:20:00 CET 2012
ro.build.date.utc=1329362400
ro.build.type=eng
ro.build.user=root
ro.build.host=ANKObian
ro.build.tags=test-keys
ro.product.model=GT-I9001
ro.product.brand=Samsung
ro.product.name=full_galaxysplus
ro.product.device=galaxysplus
ro.product.board=qcom
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Samsung
ro.product.locale.language=hdpi
ro.product.locale.region=
ro.wifi.channels=
ro.board.platform=msm7x30
# ro.build.product is obsolete; use ro.product.device
ro.build.product=galaxysplus
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=full_galaxysplus-eng 2.3.7 GINGERBREAD eng.root.20120216.03
5237 test-keys
ro.build.fingerprint=Samsung/full_galaxysplus/galaxysplus:2.3.7/GINGERBREAD/eng.
root.20120216.035237:eng/test-keys
ro.cm.device=galaxysplus
# end build properties
#
# system.prop for galaxysplus
#
# from init.rc
#service.brcm.bt.srv_active=0
#service.brcm.bt.hcid_active=0
#service.brcm.fm.activation=0
#ro.rfkilldisabled=0
# from build.prop
#
# system.prop for surf
#
debug.sf.hw=1
dalvik.vm.heapsize=64m
ro.sf.lcd_density=240
#ro.dev.dmm=1
#dev.dmm.dpd.trigger_delay=30
#
# system props for the cne module
#
#persist.cne.UseCne=vendor
#persist.cne.bat.range.low.med=30
#persist.cne.bat.range.med.high=60
#persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
#persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
#persist.cne.bwbased.rat.sel=false
#persist.cne.snsr.based.rat.mgt=false
#persist.cne.bat.based.rat.mgt=false
#persist.cne.rat.acq.time.out=30000
#persist.cne.rat.acq.retry.tout=0
#
#lpa.decode=false
#ro.hdmi.enable=true
#
# system props for the data modules
#
#ro.use_data_netmgrd=true
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=16
#
# system props for the MM modules
#
#media.stagefright.enable-player=true
#media.stagefright.enable-meta=false
#media.stagefright.enable-scan=false
#media.stagefright.enable-http=true
#media.stagefright.enable-rtsp=false
# Samsung USB default mode
#persist.service.usb.setting=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
wifi.supplicant_scan_interval=15
#ro.secdevenc=true
dalvik.vm.dexopt-flags=m=y
#
# ADDITIONAL_BUILD_PROPERTIES
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d/dev/ttyS0
wifi.interface=eth0
ro.opengles.version=131072
ro.config.ehrpd=true
ro.telephony.ril_class=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
mobiledata.interfaces=pdp0,gprs,ppp0
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
keyguard.no_require_sim=true
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.kernel.android.checkjni=1
ro.setupwizard.mode=OPTIONAL
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
~ #
Click to expand...
Click to collapse
Hm, this puzzles me a little bit and will become quite a challenge more than I thought. But I'm still confident that I will work it out soon

Development [RECOVERY][OFFICIAL] TWRP for ASUS ROG Phone 5 & ROG Phone 5S

Code:
*** Disclaimer ***
All flashing is done at your own risk!
While nothing from this thread should break your device,
don't come back here blaming anyone if it does!
Introduction
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and
Click to expand...
Click to collapse
Images
Prerequisites
Unlocked Bootloader
Click to expand...
Click to collapse
Installation instructions
Fastboot Install Method:
You will need the platform-tools from the Android SDK on your computer. Find the Android command line tools section on the page linked and install the SDK tools package. From the SDK Manager, download only the platform-tools to get adb and fastboot binaries.
Windows users will need proper drivers installed on their computer. You can try the Naked ADB drivers or the Universal ADB drivers if you don't already have a working driver installed
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type:
Code:
Code:
adb reboot bootloader
You should now be in fastboot mode.
Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
Code:
Code:
fastboot boot twrp.img
Now you are booted into TWRP, but it is NOT permanently installed. To install it permanently, use the "Flash current TWRP" option in the Advanced menu. This will install the currently booted TWRP permanently to both slots. NOTE: If you were previously rooted, you will need to re-install the root apk/zip as the TWRP install will overwrite it!
Click to expand...
Click to collapse
Device ChangelogCurrent version: 3.5.2_11-2:
3.5.2_11-2
Common version for all ROG 5 versions.
Fixed decryption issue
Spoiler: Old
3.5.2_11-0:
Initial version (Tested only on ROG Phone 5S, need info about ROG Phone 5).
Click to expand...
Click to collapse
Device Changelog
Download for ROG Phone 5
Latest official ROG Phone 5 version
Click to expand...
Click to collapse
Download for ROG Phone 5S
Latest official ROG Phone 5 version
Click to expand...
Click to collapse
Sources
TWRP
Device tree
Kernel source
Click to expand...
Click to collapse
Known issues
Device-specific
USB-OTG not working
Battery Status not working
Click to expand...
Click to collapse
Bug reporting
If you have an issue, the first step is to post a recovery log so we can determine the cause of the issue. This is done in recovery using Advanced -> Copy Log, or adb pull /tmp/recovery.log. Once a log is uploaded we can determine how best to proceed. NOTE: Posts that are reporting bugs or issues without an accompanying recovery log will be ignored! Additionally, providing details about your device setup, including variant, firmware version, and exact steps to reproduce your issue will also be helpful in diagnosing the problem.
If your issue is determined to be a bug, please consider posting it to our github issues log. It's pretty much impossible for us to keep up with the more than 40 threads that we have for the devices that we "directly" support. If you have a significant problem that cannot be answered in this thread, your best bet is to contact us via our website. If you see someone that's struggling, feel free to point it out to us. We need your help to help us keep track of all of our devices! Thanks!
Click to expand...
Click to collapse
Additional Help/Support
Live support is available on Zulip.
Click to expand...
Click to collapse
Credits
@Freak07 and @Captain_Throwback for advices
@Qtr1st and @danfrid for testing
Click to expand...
Click to collapse

reserved

reserved

What info do you need for the original?
Spoiler: Full build.prop
Code:
# begin common build properties
# autogenerated by build/make/tools/buildinfo_common.sh
ro.system.build.date=Tue Aug 17 23:43:46 CST 2021
ro.system.build.date.utc=1629215026
ro.system.build.fingerprint=asus/WW_I005D/ASUS_I005_1:11/RKQ1.201022.002/18.0840.2107.151-0:user/release-keys
ro.system.build.id=RKQ1.201022.002
ro.system.build.tags=release-keys
ro.system.build.type=user
ro.system.build.version.incremental=18.0840.2107.151-0
ro.system.build.version.release=11
ro.system.build.version.release_or_codename=11
ro.system.build.version.sdk=30
ro.product.system.device=ASUS_I005_1
ro.product.system.model=ASUS_I005D
ro.product.system.name=WW_I005D
ro.product.system.brand=asus
ro.product.system.manufacturer=asus
# end common build properties
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=RKQ1.201022.002
ro.build.keys=release-keys
ro.build.display_build_number=true
ro.build.display.id=RKQ1.201022.002.WW_Phone-18.0840.2107.151-0
ro.build.version.incremental=18.0840.2107.151-0
ro.build.version.sdk=30
ro.build.version.preview_sdk=0
ro.build.version.preview_sdk_fingerprint=REL
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=11
ro.build.version.release_or_codename=11
ro.build.version.security_patch=2021-07-05
ro.build.version.base_os=
ro.build.version.min_supported_target_sdk=23
ro.build.date=Tue Aug 17 23:43:46 CST 2021
ro.build.date.utc=1629215026
ro.build.type=user
ro.build.user=android
ro.build.host=mcrd1-19
ro.build.tags=release-keys
ro.build.flavor=qssi-user
ro.build.system_root_image=false
ro.build.epad.project=
[Build] buildinfo.sh : TARGET_SKU=WW
[Build] buildinfo.sh : ASUS_TARGET_PRODUCT=
ro.vendor.build.fota.version=WW_I005D-18.0840.2107.151-0
ro.product.locale.region=
ro.build.software.version=18_0840_2107_151
ro.vendor.build.software.version=18_0840_2107_151
ro.vendor.build.asus.number=18.0840.2107.151-0
ro.vendor.build.asus.version=18.0840.2107.151
ro.build.product=ZS673KS
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.locale=en-US
ro.wifi.channels=
# Do not try to parse thumbprint
# end build properties
#
# from vendor/asus/system.prop
#
#
# system.prop for ZS673KS
#
# add for beta-userstage
ro.vendor.asus.logupload=0
ro.vendor.asus.beta=0
ro.vendor.confidentiality=0
# end of vendor/asus/system.prop
#
# from vendor/asus/ZS673KS/twinapps/twinapps.prop
#
#
# system.prop for TwinApps
#
#ASUS IMS Carol_Hu: https://android-review.googlesource.com/c/platform/build/+/1417451
external_storage.cross_user.enabled=1
# end of vendor/asus/ZS673KS/twinapps/twinapps.prop
#
# from vendor/asus/ZS673KS/system.prop
#
#
# system.prop for ZS673KS
#
#ASUS BSP Wei ++
persist.sys.hardcoder.name=ta_itf
#ASUS BSP Wei --
#ASUS_BSP Jimmy add for vibration intensity ++
ro.vendor.asus.scale_low_max_amp=84
ro.vendor.asus.scale_none_max_amp=168
#ASUS_BSP Jimmy add for vibration intensity --
#ro.vendor.asus.logupload=0
vendor.display.disable_rounded_corner=0
#vendor.display.enable_rounded_corner=1
vendor.perf.workloadclassifier.enable=true
persist.log.tag.CompositionEngine=E
persist.log.tag.FreeReflect=E
persist.log.tag.BeaconStatManager=E
persist.log.tag.DEBUG_CACHE_UPLOAD_PV=E
persist.log.tag.SharedPreferencesImpl=E
persist.log.tag.DiskCacheProducer=E
persist.log.tag.HippyCore=E
persist.log.tag.MultiplexProducer=E
persist.log.tag.DataSource=E
persist.log.tag.AppStore-DownloadManagerService=E
persist.log.tag.AppStore-AppStoreDownloadManager=E
persist.log.tag.AppStore-NetworkPackageRepo=E
persist.log.tag.AppStore-WallpaperManagerService=E
persist.log.tag.AppStore-OkHttp-LL-getRecommendInstallApps=E
persist.log.tag.AppStore-OkHttp-EL-getRecommendInstallApps=E
persist.log.tag.AppStore-OkHttp-EL-getAppUpdateInfo=E
persist.log.tag.AppStore-OkHttp-LL-getAppUpdateInfo=E
persist.log.tag.AppStore-OkHttp-EL-getConfigItemData=E
persist.log.tag.AppStore-OkHttp-LL-getConfigItemData=E
persist.log.tag.AppStore-OkHttp-EL-getValidPreDownloadPkgs=E
persist.log.tag.AppStore-OkHttp-LL-getValidPreDownloadPkgs=E
persist.log.tag.AppStore-AppStoreDownloadManager=E
persist.log.tag.AppStore-OrderServiceManager=E
persist.log.tag.AppStore-NetworkSwitch=E
persist.log.tag.AppStore-OkHttp-LL-getGameConfig=E
persist.log.tag.AppStore-OkHttp-EL-getGameConfig=E
persist.log.tag.AppStore-OkHttp-EL-getPublicAppByPkgNameList=E
persist.log.tag.AppStore-OkHttp-LL-getPublicAppByPkgNameList=E
persist.log.tag.ANDR-PERF-LM=E
persist.log.tag.QC2C2DEngine=E
persist.log.tag.skia=E
persist.log.tag.GCloud=E
persist.log.tag.threaded_app=E
persist.log.tag.BatteryStatsImpl=E
persist.log.tag.NotificationFilter=E
persist.log.tag.SystemProperties=E
persist.log.tag.BufferQueueProducer=E
# end of vendor/asus/ZS673KS/system.prop
#
# from device/qcom/qssi/system.prop
#
#
# system.prop for qssi
#
rild.libpath=/vendor/lib64/libril-qc-hal-qmi.so
#rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=RUIM,RUIM
DEVICE_PROVISIONED=1
# Set network mode to (NR_LTE_TDSCDMA_CDMA_EVDO_GSM_WCDMA, NR_LTE_TDSCDMA_CDMA_EVDO_GSM_WCDMA) for 8+8 mode device on DSDS mode
#ro.telephony.default_network=33,33
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
#ro.hdmi.enable=true
#persist.speaker.prot.enable=false
qcom.hw.aac.encoder=true
#
# system props for the cne module
#
persist.vendor.cne.feature=1
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
media.stagefright.thumbnail.prefer_hw_codecs=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
media.settings.xml=/vendor/etc/media_profiles_vendor.xml
#16777215 is decimal sum of supported codecs in AAL
#codecs:(PARSER_)AAC AC3 AMR_NB AMR_WB ASF AVI DTS FLV 3GP 3G2 MKV MP2PS MP2TS MP3 OGG QCP WAV FLAC AIFF APE DSD MOV MHAS
vendor.mm.enable.qcom_parser=12451582
persist.mm.enable.prefetch=true
#
# system props for the data modules
#
ro.vendor.use_data_netmgrd=true
persist.vendor.data.mode=concurrent
#system props for time-services
persist.timed.enable=true
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=1
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#System props for BT
ro.bluetooth.library_name=libbluetooth_qti.so
persist.vendor.btstack.aac_frm_ctl.enabled=true
persist.bluetooth.avrcpversion=avrcp16
persist.vendor.btstack.enable.twsplus=true
persist.vendor.btstack.enable.twsplussho=true
# ASUS BSP Bluetooth: disable SWB
persist.vendor.qcom.bluetooth.enable.swb=false
persist.vendor.qcom.bluetooth.enable.swbpm=false
#system prop for RmNet Data
persist.rmnet.data.enable=true
persist.data.wda.enable=true
persist.data.df.dl_mode=5
persist.data.df.ul_mode=5
persist.data.df.agg.dl_pkt=10
persist.data.df.agg.dl_size=4096
persist.data.df.mux_count=8
persist.data.df.iwlan_mux=9
persist.data.df.dev_name=rmnet_usb0
#property to enable user to access Google WFD settings
persist.debug.wfd.enable=1
##property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
#property to enable HWC for VDS
debug.sf.enable_hwc_vds=1
#property to latch unsignaled buffer
debug.sf.latch_unsignaled=1
# enable tunnel encoding for amrwb
tunnel.audio.encode = true
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
# system prop for NFC DT
ro.nfc.port=I2C
#initialize QCA1530 detection
sys.qca1530=detect
#Enable stm events
persist.debug.coresight.config=stm-events
#hwui properties
ro.hwui.texture_cache_size=72
ro.hwui.layer_cache_size=48
ro.hwui.r_buffer_cache_size=8
ro.hwui.path_cache_size=32
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=6
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
config.disable_rtt=true
#Bringup properties
persist.sys.force_sw_gles=1
persist.vendor.radio.atfwd.start=true
ro.kernel.qemu.gles=0
qemu.hw.mainkeys=0
# ASUS_BSP "Enable IOT logging"+++
persist.vendor.service.bt.iotinfo.report.enable=true
# ASUS_BSP "Enable IOT logging"---
#Expose aux camera for below packages
vendor.camera.aux.packagelist=org.codeaurora.snapcam
#enable IZat OptInApp overlay
persist.vendor.overlay.izat.optin=rro
# Property for backup NTP Server
persist.backup.ntpServer="0.pool.ntp.org"
#Property to enable Mag filter
persist.vendor.sensors.enable.mag_filter=true
#Partition source order for Product/Build properties pickup.
ro.product.property_source_order=odm,vendor,product,system_ext,system
#Property to enable Codec2 for audio and OMX for Video
debug.stagefright.ccodec=1
#Property to set native recorder's maximum base layer fps
ro.media.recorder-max-base-layer-fps = 60
#Battery Property
ro.charger.enable_suspend = 1
# ASUS_BSP +++
persist.vendor.asus.logcat.filenum=20
# property for csclogtool
logtool.package=com.asus.csclogtool
logtool.class=com.asus.csclogtool.LogService
ro.asus.rog=1
# ASUS_BSP ---
# jack for default log flag
persist.vendor.asus.startlog=0
persist.vendor.sys.downloadmode.enable=0
# ASUS_BSP ---
# ASUS_BSP "Enable IOT logging"+++
persist.vendor.service.bt.iotinfo.report.enable=true
# ASUS_BSP "Enable IOT logging"---
# [ASUS BSP] for Poweroff Alarm Support
ro.vendor.asus.poweroffalarm_support=1
# ASUS_BSP AustinT "FP wakeup property"+++
persist.vendor.asus.fp.wakeup_support=true
persist.vendor.asus.fp.wakeup=false
# ASUS_BSP AustinT "FP wakeup property"---
# ASUS_BSP AustinC Dirac +++
ro.vendor.dirac.acs.controller=gef
ro.vendor.dirac.acs.storeSettings=1
ro.vendor.dirac.acs.ignore_error=0
ro.vendor.dirac.gef.int.did=0xF,0x313,0x2C4
ro.vendor.dirac.gef.ext.did=0xA,0x2D,0x14,0x2C7,0x2C9,0x1F7
ro.vendor.dirac.gef.int.tid=0x10012D00
ro.vendor.dirac.gef.int.mid=0x10012DE0
ro.vendor.dirac.gef.ext.mid=0x10012DE1
ro.vendor.dirac.gef.system_sound=1
ro.vendor.dirac.gef.ins.tid=0x10012D02
ro.vendor.dirac.gef.ins.mid=0x10012DE2
ro.vendor.dirac.gef.ins.did=0xF,0x313,0x2C4
ro.vendor.dirac.gef.ins.appt=0x00011131
ro.vendor.dirac.config=16
ro.vendor.dirac.acs.rotation=true
# ASUS_BSP AustinC Dirac ---
# ASUS_BSP AustinC +++
log.tag.APM_AudioPolicyManager=V
# ASUS_BSP AustinC ---
#ASUS_BSP : Anakin use ACCY generation 5
vendor.asus.accy_gen=5
# end of device/qcom/qssi/system.prop
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.treble.enabled=true
ro.vendor.build.asus.sku=WW
vendor.camera.asus.system=1
vendor.camera.expTimeMax=0
vendor.camera.cam6.crop_region=2:0,0,4160,3120;4:828,621,3332,2499
vendor.camera.preview_beauty=4:1;1:1;2:1;3:1;5:1;6:1
vendor.camera.preview_portrait=4:0;1:1;2:0;3:0
[email protected],[email protected],[email protected]
[email protected],[email protected]
[email protected],[email protected],[email protected]
[email protected],[email protected]
[email protected],[email protected],[email protected]
vendor.camera.dual_bokeh=4:0;1:0;2:0;3:0;5:1
vendor.camera.lens_type=4:standard;1:standard;2:wide-angle;3:macro;5:virtual;6:sat
vendor.camera.use_frame_processor=0
vendor.camera.ai_scene_mode=4:1;1:1;2:1;3:1;6:1
vendor.camera.undistortion.preview=4:0;1:0;2:1;3:0;6:1
vendor.camera.undistortion.video=4:0;1:0;2:0;3:0
vendor.camera.capture.override_max_digital_zoom=4:8;1:8
vendor.camera.cam4.stream_list=1P/2Y/1J
vendor.camera.cam1.stream_list=1P/2Y/1J
vendor.camera.cam4.exposure_time_range=100000,32000000000
vendor.camera.cam1.exposure_time_range=100000,32000000000
vendor.camera.cam2.exposure_time_range=100000,16000000000
vendor.camera.cam3.exposure_time_range=100000,16000000000
[email protected],[email protected],[email protected],[email protected]
[email protected],[email protected],[email protected],[email protected],[email protected],[email protected]
[email protected],[email protected],[email protected]
[email protected],[email protected],[email protected],[email protected]
[email protected],[email protected]
[email protected],[email protected],[email protected],[email protected],[email protected],[email protected]
vendor.camera.fovc=0:0;1:0;2:0;3:0;4:1;5:0;6:0
vendor.camera.night=4:1;1:0;2:1;3:0;6:1
vendor.camera.aux.packagelist=org.codeaurora.snapcam,android,com.android.systemui
net.bt.name=Android
ro.vendor.qti.va_aosp.support=1

twistedumbrella said:
What info do you need for the original?
Spoiler: Full build.prop
Code:
# begin common build properties
# autogenerated by build/make/tools/buildinfo_common.sh
ro.system.build.date=Tue Aug 17 23:43:46 CST 2021
ro.system.build.date.utc=1629215026
ro.system.build.fingerprint=asus/WW_I005D/ASUS_I005_1:11/RKQ1.201022.002/18.0840.2107.151-0:user/release-keys
ro.system.build.id=RKQ1.201022.002
ro.system.build.tags=release-keys
ro.system.build.type=user
ro.system.build.version.incremental=18.0840.2107.151-0
ro.system.build.version.release=11
ro.system.build.version.release_or_codename=11
ro.system.build.version.sdk=30
ro.product.system.device=ASUS_I005_1
ro.product.system.model=ASUS_I005D
ro.product.system.name=WW_I005D
ro.product.system.brand=asus
ro.product.system.manufacturer=asus
# end common build properties
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=RKQ1.201022.002
ro.build.keys=release-keys
ro.build.display_build_number=true
ro.build.display.id=RKQ1.201022.002.WW_Phone-18.0840.2107.151-0
ro.build.version.incremental=18.0840.2107.151-0
ro.build.version.sdk=30
ro.build.version.preview_sdk=0
ro.build.version.preview_sdk_fingerprint=REL
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=11
ro.build.version.release_or_codename=11
ro.build.version.security_patch=2021-07-05
ro.build.version.base_os=
ro.build.version.min_supported_target_sdk=23
ro.build.date=Tue Aug 17 23:43:46 CST 2021
ro.build.date.utc=1629215026
ro.build.type=user
ro.build.user=android
ro.build.host=mcrd1-19
ro.build.tags=release-keys
ro.build.flavor=qssi-user
ro.build.system_root_image=false
ro.build.epad.project=
[Build] buildinfo.sh : TARGET_SKU=WW
[Build] buildinfo.sh : ASUS_TARGET_PRODUCT=
ro.vendor.build.fota.version=WW_I005D-18.0840.2107.151-0
ro.product.locale.region=
ro.build.software.version=18_0840_2107_151
ro.vendor.build.software.version=18_0840_2107_151
ro.vendor.build.asus.number=18.0840.2107.151-0
ro.vendor.build.asus.version=18.0840.2107.151
ro.build.product=ZS673KS
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.locale=en-US
ro.wifi.channels=
# Do not try to parse thumbprint
# end build properties
#
# from vendor/asus/system.prop
#
#
# system.prop for ZS673KS
#
# add for beta-userstage
ro.vendor.asus.logupload=0
ro.vendor.asus.beta=0
ro.vendor.confidentiality=0
# end of vendor/asus/system.prop
#
# from vendor/asus/ZS673KS/twinapps/twinapps.prop
#
#
# system.prop for TwinApps
#
#ASUS IMS Carol_Hu: https://android-review.googlesource.com/c/platform/build/+/1417451
external_storage.cross_user.enabled=1
# end of vendor/asus/ZS673KS/twinapps/twinapps.prop
#
# from vendor/asus/ZS673KS/system.prop
#
#
# system.prop for ZS673KS
#
#ASUS BSP Wei ++
persist.sys.hardcoder.name=ta_itf
#ASUS BSP Wei --
#ASUS_BSP Jimmy add for vibration intensity ++
ro.vendor.asus.scale_low_max_amp=84
ro.vendor.asus.scale_none_max_amp=168
#ASUS_BSP Jimmy add for vibration intensity --
#ro.vendor.asus.logupload=0
vendor.display.disable_rounded_corner=0
#vendor.display.enable_rounded_corner=1
vendor.perf.workloadclassifier.enable=true
persist.log.tag.CompositionEngine=E
persist.log.tag.FreeReflect=E
persist.log.tag.BeaconStatManager=E
persist.log.tag.DEBUG_CACHE_UPLOAD_PV=E
persist.log.tag.SharedPreferencesImpl=E
persist.log.tag.DiskCacheProducer=E
persist.log.tag.HippyCore=E
persist.log.tag.MultiplexProducer=E
persist.log.tag.DataSource=E
persist.log.tag.AppStore-DownloadManagerService=E
persist.log.tag.AppStore-AppStoreDownloadManager=E
persist.log.tag.AppStore-NetworkPackageRepo=E
persist.log.tag.AppStore-WallpaperManagerService=E
persist.log.tag.AppStore-OkHttp-LL-getRecommendInstallApps=E
persist.log.tag.AppStore-OkHttp-EL-getRecommendInstallApps=E
persist.log.tag.AppStore-OkHttp-EL-getAppUpdateInfo=E
persist.log.tag.AppStore-OkHttp-LL-getAppUpdateInfo=E
persist.log.tag.AppStore-OkHttp-EL-getConfigItemData=E
persist.log.tag.AppStore-OkHttp-LL-getConfigItemData=E
persist.log.tag.AppStore-OkHttp-EL-getValidPreDownloadPkgs=E
persist.log.tag.AppStore-OkHttp-LL-getValidPreDownloadPkgs=E
persist.log.tag.AppStore-AppStoreDownloadManager=E
persist.log.tag.AppStore-OrderServiceManager=E
persist.log.tag.AppStore-NetworkSwitch=E
persist.log.tag.AppStore-OkHttp-LL-getGameConfig=E
persist.log.tag.AppStore-OkHttp-EL-getGameConfig=E
persist.log.tag.AppStore-OkHttp-EL-getPublicAppByPkgNameList=E
persist.log.tag.AppStore-OkHttp-LL-getPublicAppByPkgNameList=E
persist.log.tag.ANDR-PERF-LM=E
persist.log.tag.QC2C2DEngine=E
persist.log.tag.skia=E
persist.log.tag.GCloud=E
persist.log.tag.threaded_app=E
persist.log.tag.BatteryStatsImpl=E
persist.log.tag.NotificationFilter=E
persist.log.tag.SystemProperties=E
persist.log.tag.BufferQueueProducer=E
# end of vendor/asus/ZS673KS/system.prop
#
# from device/qcom/qssi/system.prop
#
#
# system.prop for qssi
#
rild.libpath=/vendor/lib64/libril-qc-hal-qmi.so
#rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=RUIM,RUIM
DEVICE_PROVISIONED=1
# Set network mode to (NR_LTE_TDSCDMA_CDMA_EVDO_GSM_WCDMA, NR_LTE_TDSCDMA_CDMA_EVDO_GSM_WCDMA) for 8+8 mode device on DSDS mode
#ro.telephony.default_network=33,33
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
#ro.hdmi.enable=true
#persist.speaker.prot.enable=false
qcom.hw.aac.encoder=true
#
# system props for the cne module
#
persist.vendor.cne.feature=1
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
media.stagefright.thumbnail.prefer_hw_codecs=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
media.settings.xml=/vendor/etc/media_profiles_vendor.xml
#16777215 is decimal sum of supported codecs in AAL
#codecs:(PARSER_)AAC AC3 AMR_NB AMR_WB ASF AVI DTS FLV 3GP 3G2 MKV MP2PS MP2TS MP3 OGG QCP WAV FLAC AIFF APE DSD MOV MHAS
vendor.mm.enable.qcom_parser=12451582
persist.mm.enable.prefetch=true
#
# system props for the data modules
#
ro.vendor.use_data_netmgrd=true
persist.vendor.data.mode=concurrent
#system props for time-services
persist.timed.enable=true
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=1
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#System props for BT
ro.bluetooth.library_name=libbluetooth_qti.so
persist.vendor.btstack.aac_frm_ctl.enabled=true
persist.bluetooth.avrcpversion=avrcp16
persist.vendor.btstack.enable.twsplus=true
persist.vendor.btstack.enable.twsplussho=true
# ASUS BSP Bluetooth: disable SWB
persist.vendor.qcom.bluetooth.enable.swb=false
persist.vendor.qcom.bluetooth.enable.swbpm=false
#system prop for RmNet Data
persist.rmnet.data.enable=true
persist.data.wda.enable=true
persist.data.df.dl_mode=5
persist.data.df.ul_mode=5
persist.data.df.agg.dl_pkt=10
persist.data.df.agg.dl_size=4096
persist.data.df.mux_count=8
persist.data.df.iwlan_mux=9
persist.data.df.dev_name=rmnet_usb0
#property to enable user to access Google WFD settings
persist.debug.wfd.enable=1
##property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
#property to enable HWC for VDS
debug.sf.enable_hwc_vds=1
#property to latch unsignaled buffer
debug.sf.latch_unsignaled=1
# enable tunnel encoding for amrwb
tunnel.audio.encode = true
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
# system prop for NFC DT
ro.nfc.port=I2C
#initialize QCA1530 detection
sys.qca1530=detect
#Enable stm events
persist.debug.coresight.config=stm-events
#hwui properties
ro.hwui.texture_cache_size=72
ro.hwui.layer_cache_size=48
ro.hwui.r_buffer_cache_size=8
ro.hwui.path_cache_size=32
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=6
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
config.disable_rtt=true
#Bringup properties
persist.sys.force_sw_gles=1
persist.vendor.radio.atfwd.start=true
ro.kernel.qemu.gles=0
qemu.hw.mainkeys=0
# ASUS_BSP "Enable IOT logging"+++
persist.vendor.service.bt.iotinfo.report.enable=true
# ASUS_BSP "Enable IOT logging"---
#Expose aux camera for below packages
vendor.camera.aux.packagelist=org.codeaurora.snapcam
#enable IZat OptInApp overlay
persist.vendor.overlay.izat.optin=rro
# Property for backup NTP Server
persist.backup.ntpServer="0.pool.ntp.org"
#Property to enable Mag filter
persist.vendor.sensors.enable.mag_filter=true
#Partition source order for Product/Build properties pickup.
ro.product.property_source_order=odm,vendor,product,system_ext,system
#Property to enable Codec2 for audio and OMX for Video
debug.stagefright.ccodec=1
#Property to set native recorder's maximum base layer fps
ro.media.recorder-max-base-layer-fps = 60
#Battery Property
ro.charger.enable_suspend = 1
# ASUS_BSP +++
persist.vendor.asus.logcat.filenum=20
# property for csclogtool
logtool.package=com.asus.csclogtool
logtool.class=com.asus.csclogtool.LogService
ro.asus.rog=1
# ASUS_BSP ---
# jack for default log flag
persist.vendor.asus.startlog=0
persist.vendor.sys.downloadmode.enable=0
# ASUS_BSP ---
# ASUS_BSP "Enable IOT logging"+++
persist.vendor.service.bt.iotinfo.report.enable=true
# ASUS_BSP "Enable IOT logging"---
# [ASUS BSP] for Poweroff Alarm Support
ro.vendor.asus.poweroffalarm_support=1
# ASUS_BSP AustinT "FP wakeup property"+++
persist.vendor.asus.fp.wakeup_support=true
persist.vendor.asus.fp.wakeup=false
# ASUS_BSP AustinT "FP wakeup property"---
# ASUS_BSP AustinC Dirac +++
ro.vendor.dirac.acs.controller=gef
ro.vendor.dirac.acs.storeSettings=1
ro.vendor.dirac.acs.ignore_error=0
ro.vendor.dirac.gef.int.did=0xF,0x313,0x2C4
ro.vendor.dirac.gef.ext.did=0xA,0x2D,0x14,0x2C7,0x2C9,0x1F7
ro.vendor.dirac.gef.int.tid=0x10012D00
ro.vendor.dirac.gef.int.mid=0x10012DE0
ro.vendor.dirac.gef.ext.mid=0x10012DE1
ro.vendor.dirac.gef.system_sound=1
ro.vendor.dirac.gef.ins.tid=0x10012D02
ro.vendor.dirac.gef.ins.mid=0x10012DE2
ro.vendor.dirac.gef.ins.did=0xF,0x313,0x2C4
ro.vendor.dirac.gef.ins.appt=0x00011131
ro.vendor.dirac.config=16
ro.vendor.dirac.acs.rotation=true
# ASUS_BSP AustinC Dirac ---
# ASUS_BSP AustinC +++
log.tag.APM_AudioPolicyManager=V
# ASUS_BSP AustinC ---
#ASUS_BSP : Anakin use ACCY generation 5
vendor.asus.accy_gen=5
# end of device/qcom/qssi/system.prop
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.treble.enabled=true
ro.vendor.build.asus.sku=WW
vendor.camera.asus.system=1
vendor.camera.expTimeMax=0
vendor.camera.cam6.crop_region=2:0,0,4160,3120;4:828,621,3332,2499
vendor.camera.preview_beauty=4:1;1:1;2:1;3:1;5:1;6:1
vendor.camera.preview_portrait=4:0;1:1;2:0;3:0
[email protected],[email protected],[email protected]
[email protected],[email protected]
[email protected],[email protected],[email protected]
[email protected],[email protected]
[email protected],[email protected],[email protected]
vendor.camera.dual_bokeh=4:0;1:0;2:0;3:0;5:1
vendor.camera.lens_type=4:standard;1:standard;2:wide-angle;3:macro;5:virtual;6:sat
vendor.camera.use_frame_processor=0
vendor.camera.ai_scene_mode=4:1;1:1;2:1;3:1;6:1
vendor.camera.undistortion.preview=4:0;1:0;2:1;3:0;6:1
vendor.camera.undistortion.video=4:0;1:0;2:0;3:0
vendor.camera.capture.override_max_digital_zoom=4:8;1:8
vendor.camera.cam4.stream_list=1P/2Y/1J
vendor.camera.cam1.stream_list=1P/2Y/1J
vendor.camera.cam4.exposure_time_range=100000,32000000000
vendor.camera.cam1.exposure_time_range=100000,32000000000
vendor.camera.cam2.exposure_time_range=100000,16000000000
vendor.camera.cam3.exposure_time_range=100000,16000000000
[email protected],[email protected],[email protected],[email protected]
[email protected],[email protected],[email protected],[email protected],[email protected],[email protected]
[email protected],[email protected],[email protected]
[email protected],[email protected],[email protected],[email protected]
[email protected],[email protected]
[email protected],[email protected],[email protected],[email protected],[email protected],[email protected]
vendor.camera.fovc=0:0;1:0;2:0;3:0;4:1;5:0;6:0
vendor.camera.night=4:1;1:0;2:1;3:0;6:1
vendor.camera.aux.packagelist=org.codeaurora.snapcam,android,com.android.systemui
net.bt.name=Android
ro.vendor.qti.va_aosp.support=1
Click to expand...
Click to collapse
Because I don't have device, I need someone to test it. Currently it was tested only on ROG Phone 5S. I sent it to one guy who has ROG Phone 5, when he will tell me that it works, I will upload build here.

mikalovtch said:
Because I don't have device, I need someone to test it. Currently it was tested only on ROG Phone 5S. I sent it to one guy who has ROG Phone 5, when he will tell me that it works, I will upload build here.
Click to expand...
Click to collapse
Oh ok. Good luck.

twistedumbrella said:
Oh ok. Good luck.
Click to expand...
Click to collapse
Published but at the moment there is issue with decryption /data on ROG Phone 5.

mikalovtch said:
Published but at the moment there is issue with decryption /data on ROG Phone 5.
Click to expand...
Click to collapse
Thanks for the update. I know people have been asking for TWRP.

will viper4android work if using twrp?

Thanks for doing this! Really appreciate all the time you guys spent getting this to work!

New build is onlineThe new version supports ROG 5 and ROG 5S in one image. Also there is fix for data decryption. Download link is in the first post.
Thanks @Qtr1st, @Freak07 and @danfrid for testing it on their devices.

Hi, just installed twrp, and boots into it first time, but if I restart the recovery it reverts back to the original version. Am I missing something?
I'm using the tencent version with ww rom

Madbullben said:
Hi, just installed twrp, and boots into it first time, but if I restart the recovery it reverts back to the original version. Am I missing something?
I'm using the tencent version with ww rom
Click to expand...
Click to collapse
Did you actually install it or just boot into it? Once you are in twrp, you have to use twrp to install the recovery img. fastboot boot twrp.img only boots from the image, it doesn't install it.

TiklMiPickles said:
Did you actually install it or just boot into it? Once you are in twrp, you have to use twrp to install the recovery img. fastboot boot twrp.img only boots from the image, it doesn't install it.
Click to expand...
Click to collapse
I just booted into it, I hadn't done twrp for a while and forgot that it needed to be installed as well.
Do we have the other file or do we use the normal twrp.img and place on to our phone and flash it within twrp?

Madbullben said:
Hi, just installed twrp, and boots into it first time, but if I restart the recovery it reverts back to the original version. Am I missing something?
I'm using the tencent version with ww rom
Click to expand...
Click to collapse
NVM, I can't even get 'fastboot boot twrp.img' to work, so I obviously don't know what I'm talking about. The fastboot command doesn't see my phone in bootloader mode, then when I go into fastbootd like I did to root, it doesn't have the 'boot' command.

Madbullben said:
I just booted into it, I hadn't done twrp for a while and forgot that it needed to be installed as well.
Do we have the other file or do we use the normal twrp.img and place on to our phone and flash it within twrp?
Click to expand...
Click to collapse
You can just install the .img file usually. How did you manage to get fastboot to use the boot command? I'm plugged into the side port, but in the fastboot mode, it doesn't have the boot command, then in the bootloader mode fastboot doesn't see the phone at all.

TiklMiPickles said:
NVM, I can't even get 'fastboot boot twrp.img' to work, so I obviously don't know what I'm talking about. The fastboot command doesn't see my phone in bootloader mode, then when I go into fastbootd like I did to root, it doesn't have the 'boot' command.
Click to expand...
Click to collapse
Edit: reloaded the page before the second post.

TiklMiPickles said:
You can just install the .img file usually. How did you manage to get fastboot to use the boot command? I'm plugged into the side port, but in the fastboot mode, it doesn't have the boot command, then in the bootloader mode fastboot doesn't see the phone at all.
Click to expand...
Click to collapse
Do you have USB debugging on and allowed the computer to use it? Otherwise I'm not too sure.
Turned on USB debugging, plugged my phone into the side port, allowed pc to use it when the popup came up, then followed the instructions.
Also just learned that if you flash the twrp. Img when you first do it it'll replace the system so don't do that.

Madbullben said:
Do you have USB debugging on and allowed the computer to use it? Otherwise I'm not too sure.
Turned on USB debugging, plugged my phone into the side port, allowed pc to use it when the popup came up, then followed the instructions.
Also just learned that if you flash the twrp. Img when you first do it it'll replace the system so don't do that.
Click to expand...
Click to collapse
Yes and yes, tried on both my personal and work computer. Tried using both universal drivers and the drivers released by Asus specifically. Unless I'm in fastbootd mode, 'fastboot devices' comes back empty. Super weird.

Figured it out. It was a faulty driver that worked in fastbootd mode but not the bootloader for whatever reason. Manually updated the drivers in device manager and it all works now.

Database Info

welcome