Hi,
I was trying to install a rom for the first time to a tilt and after installing jumpspl and hdspl everything was working fine. Then by mistake I installed the radio 1.71.09.01 and then it get stuck after the ATT 3G animation.
There is no way to enter bootloader, I have read the wiki and try mtty but can't connect, or get trought. I can hard reset and enter but the bloatloader starts and after everything is installed the phone resets and get stuck again. I try resetting after the bloatware strats but then again get stuck.
mtty says: usb port can not open
bootloader not working, not withe the power+camera+reset or not with camera+reset.
Any help will be appriciated!!
Thanks
Related
First it was spl 3.8. Was having trouble but could still work with the phone. Suddenly I became flashoholic. Just the same way as I flashed 50 times before, I was flashing. It all went ok. After that I'm stuck at the splash screen. Says, Format Failed. But can get into bootloader and flash roms. But that's all. No booting business.
Guess this is the end of the road, unless there is any solutiion. Any one out there?
IPL 2.20.001
SPL 3.08.001
Radio 2.47.21
OS 4.0.0.0.6 (was)
Now the mobiz step 1
i think i'm having a similiar problem with u..
flashed to SPL2.20. Everything ok..
after a few flashes, only thing i get now is the bootloader screen..
i can flash ROMs, RUU tells me its successful, but PDA just restarts and goes back to bootloader
Waaah :'( I have a most similar problem I was running pdaviet 4.0.0.6 Touch for almost 2 weeks now without a single glitch.. the phone fell on my carpet and went to bootloader screen and eversince then it has never recovered I tried a hard reset it didn't work when I was pressing the send button it did nothing I did some forum searches and tried putting back the nvid RUU and it said that the update was succesfull and the progress bar on the phone moved accordingly but it went back to the bootloader screen ... then I tried pdaviet temp rom that was in the package still no go I can tell it works somehow because the USB lights up in the bottom left when I plug the usb cable and the progress bar that moves, but I'm getting desperate IPL and SPL info is in my sig...
I can go into bootloader, flash any wm5 roms without IPL SPL. But that is all. Unless we can find a way to unlock the cid and flashback the original dopod rom, we are stuck.
anyone??? I cant use my phone at all now :'( and I didn't even re-flash it... all was working fine I just DROPPED it on a CARPET no real shock and since then it's on the bootloader screen
In my oppinion you have to send it for repair... I think it's really a phisical damage...
really no progress..
i opened a thread in the WM6 area also...
seems to be stucked at bootloader no matter what i do..
tried every single ROM, tried reflashing radio rom, tried reflashing ipl/spl, tried every RUU available..
when u guys hard reset, does it say Format is Failed ?
ice_mouton, i'm something like you.. dropped it few weeks ago.. but it still ran fine.. upgraded to PDAVIET's 4.0.0.0.6 Touch.. had no problems for the first few days of use... suddenly it refused to reset and was stuck at vendor boot screen...
after some weeks of usage my tytn2 doesn't boot anymore.
after a soft reset the boot screen is the one with the ''rainbow'' (dunno the name) and, for a second, with the message ''no image file'' (or something like that).
I rebooted 5 times and now it's working.
what happened?
thanks for any hint
This is my first time (albeit, short time on this site) that I've seen this problem, sounds pretty rare. Hope someone can help you :\
woow...
have you tried to flash a new rom?
i am by no means a pro at this but if you are at the tri colored screen cant you just simply reflash?
MTTY
If you're getting stuck at the bootloader, then you'll more than likely need to search the forums for MTTY to download it and learn the proper commands to fix the issue. When it happened to me, I had to run the BOOT command and after it booted back up, I had to run HARDSPL again otherwise it would continue to go to the bootloader everytime I soft reset.
no way with mtty (can't connect... /me newbie)
I've discovered that a soft reset with usb (also ear mic) plugged into drives into a good boot.
without reveals the multicolor screen
I've now flashed hard-spl1 found here http://forum.xda-developers.com/showthread.php?t=334679 and I've tried to soft reset a lot of times.
result: always boot ok!
I hope this is the solution...
I tried using the ShellTool to load a new rom. Now Im stuck in the tricolor load screen.
Its a G4 Phone
SPL Unlocked (2.21 Olip)
Tried loading the Balck Diamond 3.1 through ShellTool
Now Im the tool. Help please.
It seems that I should be able to load a ROM from this 3 colored boot loader screen. But every time I try the computer tells me no device detected. Just put me out of my misery, IS MY PHONE BRICKED?
Hey guys,
Really sorry if this a repeat of a previous discussion. I am new to posting.
I have never had any problems loading new ROMS, have had an 8125 and an 8525 and installed several different roms with no problem at all. Recently I bought a tilt several days ago. I had the issue with the white screen when installing SPL so I used jumpSPL. This worked but when I was installing the ROM it only got to 19 percent. I completed the recovery but still nothing happened. After this I used mtty.exe, a very nice program I might add, and used the boot command. Phone boots fine and everything works, however whenever I soft/hard reset I am stuck back on the bootloader screen and have to use mtty again. My question is this: How can I recover the original bootloader? Whenever I try to run any ROMS it stays at 0 percent. Someone please help.
Thank you
Figured I left some information out. I currently have service with ATT. On the bootloader screen top left: KAIS1*0, SPL-1.56.0000, CPLD-8....top right:RUUNBH
Contact me if assistance is still required or see the post regarding MTTY by L26.
READ BEFORE YOU FLASH! You have flashed without the use of HardSPL. This is the quick way to a brick.
Hi everybody!
Been searching for this problem on google and on this forum, but i can't find an answer to this
It's like this that i've installed wm 6.5 on my prophet, everthing was fine!
The problem was when i was trying to install another keyboard layout it restarted, and then it got stuck at the "splash screen" with the Qtek logo.
I did an Hard SPL, nothing happened.
After that i tried to boot into bootloader, everything was fine, i saw the three color screen and i started to install a new clean copy of the WM 6.5..
Everything was fine, it went to 100%, but when it was at 100% the device shutdowns.
When i tried to start it again i got into the three color screen again, and after about 7 seconds it restarts, and it starts in the three color screen...
Please help me..
Please... I really want my phone to get back to normal...?
try to connect the USB and run WM5 Rom.
The same problem..
I have the same problem after try to flash rom to my 818pro.It's still reboot into 3-color screen.How can I do??
Try flash this rom: RUU_Prophet_220734_2207114_024721_NVID.exe
from: http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
Michal