Related
Hi everyone,
i'm about to buy a mda compact. The seller says that he tried to update rom and the mda now is blocked with a screen USB/SERIAL V1.00
If I upgrade the rom how is described in the other topic is ok?
I had to say to know if i buy this one or no
I wait fiducious in your answers :lol:
HELLO
This device is only in bootloader mode so you can reflash it without problem.
There is a lot of topics in this forum to perform that. :wink:
I had to do a "simply" rom upgrade or some different operation? :?:
I have find that post on this forum http://forum.xda-developers.com/viewtopic.php?t=14973&postdays=0&postorder=asc&start=0
i had to what is described on it?
Beware though. I had once screwed my MDA during an upgrade and all it did was start iself in the bootloader mode. For some reason, I couldnt re-flash any ROM onto the machine and had to took it back to t-mobile and they replaced a new unit for me.
Mmm... this is a bad new... anyone help?
i had this problem too, all i did was kept trying to different roms till one finally worked
i Downloaded all the rom from the FTP site
1 finally worked then after that, i updated to the 1.12 Imate rom...
Can not tell you which one worked, but i had to copy it to a Memory card to do it
Maybe if you try the Windows Installers, 1 might work
hi Herian..
1st of all,as the guys said,ur phone is in bootloader mode....it's not a problem,so don't be affraid :wink:
if u have'nt performed a flash before,am gonna try avoiding u flashing unless it's the last resort...
so bro,do the following:
1-remove the battery and leave ur PDA more than 2 hours without battery(u don't need 2 hours but am taking it to the limit),so that the backup battery will drain,all old data in RAM will be lost...put the battery again...and:if it restarts and enters OS,then congratulations,but if it doesn't,so u have to go to step 2.
2-reflash ur device:
-althought ur device is a Magician(at least this is what i think),all the procedures mentioned in my post(here's the link :wink: ) http://forum.xda-developers.com/viewtopic.php?t=25830&highlight= should work with no problem,the main difference wil be entering the bootloader mode,but since ur already in it :wink: ,it not a problem anymore,this is why you have to follow my instructions starting with step 2(the link,ok).
my advice for u will be to download the 1.12.00WWE ROM from the ftp,coz it's the last one,and good luck bro
tell us the news,or pm me anytime,it will be my pleasure to help u
RAGO :lol:
First of all: hello, I am new here
I just got a Magician (MDA compact) and tried to update it. But it failed and now it is in the bootloader mode. When I try a new update, it stops in step 1 after a few minutes. On the Magician you can see "upgrade radio stack, please wait".
Any ideas? I am a little bit confused, so much money and now it doesnt't work
hi COnker..
u must upgrade ur device with the right OS,ur case happens when u try to upgrade with a different OS(eg:upgrading a magician with a Himalaya ROM),but with the same operator(eg:i-mate jam upgraded with i-mate PDA ROM,u pass country ID error,and run ClearJmpCode.exe,and it ends by a dead jam in bootloader mode... :wink: ).
so my friend,what u have to do,is to go to ftp,and search for a ROM update made specifically for Magician(try 1.12.00WWE),then follow my instruction in the above topic.....
good luck
RAGO :lol:
Noway
I had tryed several times whit a lot of MaUpgrade(finded on the ftp site) but noway... The upgrade show me a window with the version of current rom and the version of the upgrade rom... but is empty! Then, if i click on upgrade, after a few minutes the mdac shut down and the program give me a 150 error... i don't know what i have to do...
I have read in some post here that is possible to do a backup of rom on sd card and to restore it.
If some good guy send me his backup files can i relive my mdac?
Hi,
I had the same problem but i have found a way without upgrade it.
1. pull out your battery.
2. put in your charger ( not usb )
3. put in your battery and then again pull out your battery and then again put in your battery.
4. now you will see the phone is starting up and if you have calibrate your screen and the rest the phone gonna install allot of stuff but when its installing everything pull out your battery and charger.
5. put in your battery and press the power button and congratulations your phone is working again.
sorry for my english i am from belgium xD
Sorry wrong post...
Not seen the second page
Hey guys !!!!
M ex nokia user, recently i got my hands on my dads htc s710.... I hv good knowledge abt symbian but windows is more complicated..... I m new to this site, frm last 1 week i m reading threads related to vox, out of 69 i hv compleated 52, hoping that i will understand everything but it helped me a little....
Cause u guys talk so technically. Is there any one who can help me ? Plz.......
I hv a bundle questions in my mind
1 why s710 called vox n what does tht mean?
2 wht is meant by radio version?
3 wht is win standard, classic?
4 what is rom and wwe, wht it means?
5 how to upgrade it?
6 i know hard reset but, wht is soft reset and do the data on the phne memory will be deleted in soft reset how to do it?
7 i m facing a problem with the battery so i will try fhm's tips
8 Is my phone win6.0 or something else?
my phone
settings/about/device info
CE OS 5.2.1236 (Build 17741.0.2.1)
Radio Version 4.1.13.41_02.88.90
RIL ver 2.002
ROM vers 1.22.720.2
Processor OMAP850 201MHz
why there is difference in...
in taskman/system info
Processor ARM
OS Windows CE
Ver 5.20 (Build 1236)
do i need to upgrade my device, i have downloaded fhm's win6.5 but not installed yet
afread if something goes wrong ?
I m very eager to know abt this plz someone help
me. I m like a new born baby here
what do i do. And plz suggest me upgrades...
Thanks..... Thanks...... Thanks..... a lot in advance
waiting for reply......bye
easy, Wiki is the best answer http://forum.xda-developers.com/showthread.php?t=303558
and also here http://wiki.modaco.com/index.php/HTC_Vox
please read first.
Read the wiki for complete answers...but in short:
1.http://www.wordreference.com/definition/vox
2.radio version is like the part of the phone that has to manage the "communicating part" of the phone....like making calls, receiving the signal, calls quality.wi-fi, bluetooth...etc..Different radio versions do different performances of the phone...and some seems to improve battery life.
3. Classic is for Pda (touchscreen) without "Phone capability", Professional "is for PDA(touchscreen)-Phones", Standard is for smartphone (non touchscreen)
4. ROM is the "mass-memory" part of the phone...where you store the Operating System and programs..if you have enough space ( think of it like the Hard disc of the OS for a pc). WWE means standard english version.
5. Read the wiki....basically. Backup of your data (contacts, sms etc..)>backup of the rom (optional)> Unlock> Flash SPL> Flash rom. Easier and quicker than it seems.
6. NO soft reset is a normal reset of the phone.Like you do when you shut it off, and then you power it on. Data is still there. HARD RESET...Deletes all your data...it's like having a phone just flashed with a ROM...(or in a PC when you have just formatted your hard drive and then reinstalled your Operating System)
7. Is this a question????? BTW if your battery lasts some hours...maybe it's time to change it...it's not so unusual.
8. It should be 6.0
It's your choice to upgrade...FOR ME, IMHO, all the way...phone gets better.
When you do it one time...you will do it all the time...with the pleasure of testing new roms...so you'll have your personal opinion about the best the suit your needs.
regards
Thanks
TheBo said:
Read the wiki for complete answers...but in short:
1.http://www.wordreference.com/definition/vox
2.radio version is like the part of the phone that has to manage the "communicating part" of the phone....like making calls, receiving the signal, calls quality.wi-fi, bluetooth...etc..Different radio versions do different performances of the phone...and some seems to improve battery life.
3. Classic is for Pda (touchscreen) without "Phone capability", Professional "is for PDA(touchscreen)-Phones", Standard is for smartphone (non touchscreen)
4. ROM is the "mass-memory" part of the phone...where you store the Operating System and programs..if you have enough space ( think of it like the Hard disc of the OS for a pc). WWE means standard english version.
5. Read the wiki....basically. Backup of your data (contacts, sms etc..)>backup of the rom (optional)> Unlock> Flash SPL> Flash rom. Easier and quicker than it seems.
6. NO soft reset is a normal reset of the phone.Like you do when you shut it off, and then you power it on. Data is still there. HARD RESET...Deletes all your data...it's like having a phone just flashed with a ROM...(or in a PC when you have just formatted your hard drive and then reinstalled your Operating System)
7. Is this a question????? BTW if your battery lasts some hours...maybe it's time to change it...it's not so unusual.
8. It should be 6.0
It's your choice to upgrade...FOR ME, IMHO, all the way...phone gets better.
When you do it one time...you will do it all the time...with the pleasure of testing new roms...so you'll have your personal opinion about the best the suit your needs.
regards
Click to expand...
Click to collapse
Thanks a lot for such a detailed information, i m glad, thankyou u hv solved my queries...... I hv one more question, where will i get games and softwares for my s710..? Thanks again
RxenDrav said:
easy, Wiki is the best answer http://forum.xda-developers.com/showthread.php?t=303558
and also here http://wiki.modaco.com/index.php/HTC_Vox
please read first.
Click to expand...
Click to collapse
thanks!!!!!! that link helped me
Where will i get latest official rom for my vox, i m not able to download it frm htc site. It says that the update is not for my device S/N.... Plz help, can any one give me a direct download link frm any other site like media fire, rapidshare etc..
look in the xda-wiki...also in the vOx page...there are a lot of roms, but i'm not sure You'll find the latest...(1.34) maybe.
I cannot upload it somewhere for you...no broadband connection here, where I live
http://wiki.xda-developers.com/index.php?pagename=vox_roms
1.34 is present!
Shipped ROM here http://forum.xda-developers.com/showpost.php?p=2153312&postcount=14
hope it helps
Thanks to both of u.......
U guys r great.......great....... Thanks, i m downloading.....wwe1.34. If i will face any problem while flashing...again i will come to u guys for help if u dont mind.
Then afterwards i will try cooked rom
thanks, thanks a lot...........................
With official roms you don't have to do the whole USPL thing...just plug it ot your USB cable (check that ActiveSync is connected) and start flashing.
BTW if you flash cooked roms...you have to do USPL,
Normally if you flash USPL than you can flash every cooked rom without worries, and without do the USPL thing every time...just the first
BTW if you flash a OFFICIAL rom after a cooked rom you restore again USPL.
So the next time you have tu USPL again.
Hope I've been clear.
thanks again for reply
yes i got u....now i understood what u said.
I wantd to ask one more thing, i m afraid of flashing with active sync via pc, and usually i dont get
time to sit on the pc during, i do all my blog search surfiing etc.... on my N97..
Can i flash this rom from sd card, i knw there is a way and i read the procedure on wiki as well
but i did'nt understand..... As rom is a .exe file how can i extract a files frm it...... I dont knw....help me if u can......tht would be great....thanks in advance.
Xda is rocking, u all guys r great..... Keep it up.
i love this site......
AIKONWIN said:
yes i got u....now i understood what u said.
I wantd to ask one more thing, i m afraid of flashing with active sync via pc, and usually i dont get
time to sit on the pc during, i do all my blog search surfiing etc.... on my N97..
Can i flash this rom from sd card, i knw there is a way and i read the procedure on wiki as well
but i did'nt understand..... As rom is a .exe file how can i extract a files frm it...... I dont knw....help me if u can......tht would be great....thanks in advance.
Xda is rocking, u all guys r great..... Keep it up.
i love this site......
Click to expand...
Click to collapse
If you execute the exe file, it will give you the ROM image file, a nbh file. That IS the ROM file actually, others are just tools to write that nbh to your device thru activesync.
Hope it helps
Thanks all of u...........
Thanks to all u guys, who suffered me. Sorry for the trouble tht i gave u. Finally i flashed my vox with fhm's win6.5 rom. Till now its working fine except wht i noticed is tht the bluetooth is not working properly, if any of u guys who is not fedup of me can help me out.... I dont knw abt wifi as i did'nt checked it yet. And accu weather is also not working..... Help needed......
Thanks in advance
its working.........
thanks to fhm for such a great rom. i love it, its rocking my phone..
and the bluetooth is also workin fine. no problem with this rom everything is working fine.........
but my radio version is 4.1.13.41_02.88.90 is ths same with all u guys or there is an update?
i hv one question in contacts is there is an option to see only phone contacts permanently ?
1. hum i don't remember but there are a lot of topics on that subject...with a lot of people reporting their feelings...with different ones
2. yes i think so, if I'm not wrong...again you should be able to find it with the search function...
thanks i got it.
Firstly i was trying to update from WM 6.0 to 6.1 but i didnt manage it..
after several times i decided to update to HTC HERALD UPDATE TylerC161 Wing Kit its like new skin but i damaged everything..
So when decided install, and installation was happening i touched the screen (in the rules was written dont touch the screen during installation) and i guess because of it i damaged the my windows...
What can i do now?
Now i have just HTC letters shining on my screen then it is starting and nothing happends..
If im trying to run new ROM from bootloader on 3 % i have an error
("ERROR [270] : UPDATE ERROR The image file is corrupted. Please check your Update Utility"
And EXIT.)
and i think it is becouse of CID locked, my phone came from Turkey and its written on him Turkcell..
What can i do ?
Please Help
Maybe it is possible to unlock cid code from bootloader.exe ? without ACTIVESYNC?
Welcome to forums
have a deep read in the Wiki:
http://wiki.xda-developers.com/index.php?pagename=HTC_Herald
Good luck,
I know that page and i did all instructions looking to this page, but i did a mistake with touching screen and i dont know what to do now, maybe someone can give me right and exact link to solve my problem?
Today i spend about 5 hours read this page and i downloaded alot of roms and nothing is heppening its always giving me an error on 3 %, or on 1 %.
http://wiki.xda-developers.com/index.php?pagename=HTC_Herald
I was reading this page but didnt help to me..
PLEASE HELP!
HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe
Just with this i solved my probelm..
After loading the Stylez Black v.4 WM6.1 21051 D3D 101MB Full rom my phone give some problems, so i want to go back to the T-Mobile ROM.
But when i am trying to get this rom on the phone with this help i get now the ERROR [244] : INVALID MODEL ID warring, and looked with the search here but i get a lot of different options soms topics are more than 2 years old and that is not working.
So, what can i do to load a new rom or how do i get the orginal rom back on the phone?
plz help....
Thanks in advance...
Maybe this can help you http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
Or this too http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
No solutions found...
Anyone ?? Please?
Hard-SPL bypasses Vendor Model check so shouldn't have any problem flashing any stock ROM have you tried others? Try and flash a HTC or AT&T stock, just a bizarre thing as everyone flashes stocks at some point especially if nearly brick and peeps generally flash stocks to bypass 6.5 hard-reset issue.
Can you go into bootloader and reply with Hard-SPL you have?
Also another way is to try flashing via SD, info in the flashing for noobs guide in sticky.
Same Issue
Hi,
I also use Hard SPL to flash new ROMs, however i also face the same issue with certain roms, currently i remember i has similar issues with ATNT rom.
Ok, or i am a realy noob or i doing somthing wrong...
Now when ik start the phone i get the Tri Color : (Red, Green, Blue Screen)
I did a hard reset en now the phone shows the boot screen (Stylez)
When i take the batterij off and put it in after 20 secs again or the tri color or the boot screen is loading or the screen is black.....
Please don't say that i can trow him into the trash...
All you have described there is normal. Now just follow the noobs guide to flashing in the sticky and do everything it says word for word. If the usb method doesnt work then use the sd card way.
stuntdouble said:
All you have described there is normal.
Click to expand...
Click to collapse
Ok, best news this week for me...
stuntdouble said:
Now just follow the noobs guide to flashing in the sticky and do everything it says word for word. If the usb method doesnt work then use the sd card way.
Click to expand...
Click to collapse
Sorry but i want to be shure, you mean this topic?
And if so, how do i load the rom?
Because the phone is not starting up normal,...
If you want i can make screenshots from the pc and make images so you can see?
Sorry for this noob questions....
Yes that is the thread I meant. So did you follow all that was said to do in the link about kaiser stuck at tri colour screen bootloader?
Ok, tryed but with the boot screen and with the Tri Color screen i can not make any USB connection with MTTY, when i start the kaiser with the camera button and with the powerbuton i can connect (USB is also an option (COM1 and COM2 also)).
But is this a correct move?
*contacted user via MSN*
Also tried several steps using the SD card but the phone will still hang into the tri-colour. It says loading, but won't reboot or do anything else.
Suggestions are still open.
FYI: It's a branded phone and wasn't CID-unlocked before. (Still not AFAIK)
hello every one,
please please some one help me with this, i am trying to install magldr to use nand rom types for past 1 month but it is not going through, i posted my problem in some similar question and answer thread but no one ever answered so i decided to create thread finally,
my phone software details
HTC HD2 TMOUS
OS version - 5.2.21913(21913.5.0.94)
ROM - 3.14.531.1(04666) WWE
ROM DATE- sep 29 2010
Radio version - 2.15.50.14
Flash memory size - 1024 mb
i am attaching the images which showed on my phone during bootload.
when i try to update Magldr rom it shows me my rom image as 3.14.531.1 and Magldr image as 2.00.000.0 seems like lower version than mine i think this is the problem but i am not sure it turns up into boot-loader which is colored screen of red, green and blue and turns to improvement screen which is a percentage indicator and that is the end of process it never moves forward i cannot see any improvement in updating not even 1%, it just stops at 0% every time i wait for some 15 mins and i disconnect from usb.
please some one help my old sd version drains my battery just in stand my mode itself i need to charge 3 times every day. i hate wm 6.5 i dont even have any contacts in it.
i at least have tried 20 time updating, please guys some one save me from this hell.
poke me as many suggestions as possible.
thank you for reading my post,
Best regards,
Vin
i don't get u...first u talk abt MAGLDR ...then u talk abt old sd versions...
Have u performed a HARDSPL?...Put ur phone in bootloader mode n type out wat it show there...
did you have hspl3.must be have hspl3
try use the HARDSPL 2.08 to unlock first.. then install Magldr1.13 before you install the rom
voncrane said:
i don't get u...first u talk abt MAGLDR ...then u talk abt old sd versions...
Have u performed a HARDSPL?...Put ur phone in bootloader mode n type out wat it show there...
Click to expand...
Click to collapse
no i said i am using sd version now but i have an issues with battery drain so i wanna move to NAND as i use only android i never use Windows, now the problem is i am trying to install MAGLDR as a process of installing NAND rom but it is not going through as per the issue details are in my original thread please read it so get my point.
thanks for ur time and reply
windheart said:
try use the HARDSPL 2.08 to unlock first.. then install Magldr1.13 before you install the rom
Click to expand...
Click to collapse
what is this HARDSPL(please elaborate) and where can i install it, posting a link would be more useful.
thank you
vinchinta said:
what is this HARDSPL(please elaborate) and where can i install it, posting a link would be more useful.
thank you
Click to expand...
Click to collapse
4give me but i must 1st scold u for not using the site's search function or even taking out the time 2 read instructions carefully...I believe u got MAGLDR from here..If so then good, but did u not notice the clear instructions written in bold "You need HardSPL 2.08 before installation!"....Your not following basic instructions is wats giving u all d headache u r experiencing...U r truly lucky u haven't damaged (bricked) ur phone from playing wit it without performing a HARDSPL which can be read abt & found in dis thread...
Just download the "HSPL3_PKG.zip" in post number 2, unzip, load ur fone up in bootloader mode & connect 2 pc via usb...Run the HSPL3_PKG.exe and get ur device HSPL 2.08 unlocked....
After successful installation...reboot ur device 2 confirm ur spl now reads "2.08.HSPL" and d words CotullaHSPL are present.....Then flash try flashing MAGLDR 1.13 again...u should be successful..
Next time visit threads which contain stickies like "abt NAND"...Making sure u fully understand instructions already written...ROM devs and others have taken massive time out 2 write stuffs like this out, u should honor em by reading first....Also there are tons of videos out there + if ever in doubt? Google is ur friend.
voncrane said:
4give me but i must 1st scold u for not using the site's search function or even taking out the time 2 read instructions carefully...I believe u got MAGLDR from here..If so then good, but did u not notice the clear instructions written in bold "You need HardSPL 2.08 before installation!"....Your not following basic instructions is wats giving u all d headache u r experiencing...U r truly lucky u haven't damaged (bricked) ur phone from playing wit it without performing a HARDSPL which can be read abt & found in dis thread...
Just download the "HSPL3_PKG.zip" in post number 2, unzip, load ur fone up in bootloader mode & connect 2 pc via usb...Run the HSPL3_PKG.exe and get ur device HSPL 2.08 unlocked....
After successful installation...reboot ur device 2 confirm ur spl now reads "2.08.HSPL" and d words CotullaHSPL are present.....Then flash try flashing MAGLDR 1.13 again...u should be successful..
Next time visit threads which contain stickies like "abt NAND"...Making sure u fully understand instructions already written...ROM devs and others have taken massive time out 2 write stuffs like this out, u should honor em by reading first....Also there are tons of videos out there + if ever in doubt? Google is ur friend.
Click to expand...
Click to collapse
No i did not download magldr from this source and i followed mdj Cyanogen rom video because i was about to try that in the video no where it showed about installing HSPL2.08 so i did not know that any ways u dont have to be sorry i believe u have rite to scold as ur helping me out with this, i believe thts a part of it. i went through ur thread i don't understand y it says 1024LEOs (from T-Mobile with 1024ROM) ARE NOT SUPPORTED becs in some other threads it said TMOUS with 1024 rom is compatable with all roms. this is so confusing im not a geek but trying to learn more.
thax for one and all.
Vin
vinchinta said:
No i did not download magldr from this source and i followed mdj Cyanogen rom video because i was about to try that in the video no where it showed about installing HSPL2.08 so i did not know that any ways u dont have to be sorry i believe u have rite to scold as ur helping me out with this, i believe thts a part of it. i went through ur thread i don't understand y it says 1024LEOs (from T-Mobile with 1024ROM) ARE NOT SUPPORTED becs in some other threads it said TMOUS with 1024 rom is compatable with all roms. this is so confusing im not a geek but trying to learn more.
thax for one and all.
Vin
Click to expand...
Click to collapse
if u can see in the picture i attached to thread my SPL-2.10 which seems to be upgraded version or some thing and my ROM - 3.14.531.1(04666) WWE seems to be too higher than what it is in MAGLDR, IS that a problem by any chance? sorry i am not good with these hanky panky stuff i mean software updating just getting started.
thx yoo
as far as I know HSPL3 is compatible with TMo too. as your SPL is 2.10.
vinchinta said:
No i did not download magldr from this source and i followed mdj Cyanogen rom video because i was about to try that in the video no where it showed about installing HSPL2.08 so i did not know that any ways u dont have to be sorry i believe u have rite to scold as ur helping me out with this, i believe thts a part of it. i went through ur thread i don't understand y it says 1024LEOs (from T-Mobile with 1024ROM) ARE NOT SUPPORTED becs in some other threads it said TMOUS with 1024 rom is compatable with all roms. this is so confusing im not a geek but trying to learn more.
thax for one and all.
Vin
Click to expand...
Click to collapse
Hey, its alryt...We both have the same device (TMobile HTC HD2 with 1024ROM) and so wateva has worked for me, should surely work for u as well..The thread on the ROM i use says its TMous compatible cuz it was made with our TMobile hd2's in mind and so if u would like 2 use it ...i could help u set it up safely on ur device as well....Hweva the steps r pretty str8 4ward.
vinchinta said:
if u can see in the picture i attached to thread my SPL-2.10 which seems to be upgraded version or some thing and my ROM - 3.14.531.1(04666) WWE seems to be too higher than what it is in MAGLDR, IS that a problem by any chance? sorry i am not good with these hanky panky stuff i mean software updating just getting started.
thx yoo
Click to expand...
Click to collapse
You don't have 2 be a pro 2 get android on ur device...all u have 2 be is an observant reader & instructions (by devs) follower...Perform a HARDSPL on ur device first n let me know ur progress...After that, its all a matter of following the instructions present in CMYLXGO's ROM thread
P.S. u can download Hardspl.exe from the link i posted above.
MAGLDR is not intalling in my t mobile htc hd 2
HI I HAVE A PROBLEM
I HAVE TMOBILE HTC HD 2
CURRENT ROM VERSION IS 3.14
OS 5.2
RADIO 2.15
I ALREADY INSTALLED HSPL 2.08
BUT WHEN I OPEN ROM UPDATE UTILITY IT
IS SHOWING
CURRENT IMAGE 3.14 TO 2.00
ND STUCK AT 0%
GIVING ME 266 EROOR:crying:
HELP ME PLZ
MAGLDR is not installing
T mobile HTC HD 2
PB21*** ss-b3
spl-2.08.hspl 8g xe
os version 5.2.21913
manilia version 2.5.20181424.0
rom version 3.14.531.1 (04666) wwe
rom date 09/29/10
radio version 2.15.50.14
protocol version 15.42.50.11u
my details plz help me i want to install magldr but in ruu it is giving me current image 3.14 to 2.00 nd them giving me the 266 error,,, stuck on triclour screen 0%