Original Thread : Link
***************************************
***************************************
"You will need"
: Root
: 3 partitions
: Cyanogen's 1.4 recovery
: Class 6 sd card
***************************************
***************************************
"What has been added"
: still takes a minute to boot
: su/root/superuser.apk
: term.apk
: new busybox
: new rosie "optimized"
: framework png's edited
: haykuro's apn list
: resource.apk edited
: edit customize folder
: apps to sd runs on initial boot
: linux-swap
: ext/2/3/4 support
: Jac Ski kernel
: compcache
: camera mod
: cyanogen's cpu scalling
: audio v7 mod
: full lockscreen look
: twisted's led support
: added spare parts
: added hw
: updated libs
: Gmail/market.png now hero style
: Hero look on gmail/setup wizard
: removed learn more.apk
: removed launcher
: removed plurk
: removed stocks
*******************************************
*******************************************
V1.5.5 Download
V1.5r1 Download
V1.4r1 Download
V1.4 Download
V1.3 Download
V1.2r1 Download
V1.1 Download
*********************************************
*********************************************
"Change-log"
"V1.5.5"
: yes faster than V1.5r1
: jac ski boot.img "Thanks fellas"
: based on Asia Hero release
: rosie wallpapers now in resource by default
: updated flash player
: cleaned out some hw files
: cleaned out framework images
: mostly a clean up build because i cleaned out most widgets
: cleaned out rosie images
: compcache enabled by default
: removed htc scenes
mostly it!!!
V1.5r1: will upload a little later to see if you find more errors
: nothing really special just a fast hero
: added wifi tether
: added some new audio files "thanks adndep"
: added htc sync
: fixed albums
pretty much it!!!
"V1.5"
: initial release
: based on 2.73.405.3 hero update
: fully optimized rosie and widget,, and framework
: removed bizcard and java
: everything is much faster due to secret optimized apks
: linux swap by default
: removed and added new wallpapers
: new era release!
"V1.4"
: BFS kernel patched from JAC & SKI
: CC not be default
: linux-swap set on by default
: added new rosie home screen image
: added ophone fonts to save some space
: removed all hero phone stuff that is not compatible with the g1 "only kept the G1 support stuff"
: removed unsupported libs to save space "3 removed"
"V1.3 very fast "
: full build
: Hacked rosie that I made "opens with keyboard and loads but no landscape"
: JAC-Ski Kernel best for hero "thanks JAC & SKI"
: Updated compcache
: Compcache set by default
: LED's work "thanks shafty and twisted" not 100% but they work
: added my wallpapers to rosie
: added some libs
: added new kinda more hero look
: full lockscreen
: added bin files
: added some xbin files
: added htc sync
: moved some apps to apps
: edit default settings
: added twisted's led support
: removed learn more.apk
: removed launcher
: removed plurk
: removed so so so many junk files "thats why the build is so small but still has all apk's, well besides the 3 I removed"
lots more stuff!!
"V1.2r1"
: fixed mms.apk
: added image land & port for lockscreen
: more defaults changed
"V1.2"
: added term.apk
: edit some default settings
: fixed build.prop
: added hw files "just one"
: resized market.png "a little bit bigger"
"V1.1"
: please read first post
: fixed longpress on rosie
: 3.1.2 google maps
: added some xbin files
drizzys releaess are always so confusing. he releases so many versions n so many differnet threads for each one, give me headache haha sometimes lol. thanks for the port though.
drizzy is finally back! can't wait to see what he's cooked up for us now...
Seems pretty fast, thanks.
Is it compatiable with Cyan 4.1.6 the latest release with bfs?? if so can you add the theme update using http://forum.xda-developers.com/showthread.php?t=554579
thanks
does this require just a wipe or do i need to format the sd card too?
Setenza,
Im still fairly new to rooting and have had great success with all the tutorials and guides on various sites.
Just wondering what the difference between this rom and jachero 1.7r2 ? I figured Id ask you as you created/posted them ! jachero1.7r2 works amazing with 64mb swap and 60 swappiness, so what benefit is there in switching to drizzys v1.2r1.
also, most hero roms give me the blurry screen, but not jachero 1.7r2. Do you think this drizzy will be nice and clear on my mytouch ? are these two roms based on the same kernel ?
BRAND1SH said:
Setenza,
Im still fairly new to rooting and have had great success with all the tutorials and guides on various sites.
Just wondering what the difference between this rom and jachero 1.7r2 ? I figured Id ask you as you created/posted them ! jachero1.7r2 works amazing with 64mb swap and 60 swappiness, so what benefit is there in switching to drizzys v1.2r1.
also, most hero roms give me the blurry screen, but not jachero 1.7r2. Do you think this drizzy will be nice and clear on my mytouch ? are these two roms based on the same kernel ?
Click to expand...
Click to collapse
The Drizzy rom is not optimized for the moment, wait for the next version, probably with new bfs kernel and some optimization.
setenza01 said:
The Drizzy rom is not optimized for the moment, wait for the next version, probably with new bfs kernel and some optimization.
Click to expand...
Click to collapse
Will do..
also I think I jinxed myself when I typed that last message.. I just got the htc/loading screen again.. Apparantly I ONLY get it when exiting the browser.
Any ideas why ? should I adjust my swap, which is at 64mb, or swappiness, which is at 60.
thanks again !!
I don't use jachero 1.7r2 but i read some post that say the same thing with the browser on close. I don't have the solution, try ZeroXD 5.1r2 on dream forum that's a merge for 32b and Dream. They works really good.
Or wait for new rom Jachero 1.8 with bfs or Drizzy with bfs
has this rom corrected the issue where the screen brightness won't stay when changed by an app such as Power Manager? Every Hero rom i've used has had this issue. An app would try and change the brightness and it would just go back to what it was set to before. And yes I've disabled the auto backlight in the settings.
Force Closes everyhwere
Hi, I just installed this ROM and after initial boot, I get a lot of force closes on all the apps that want to run (SetCPU, SuperUser, etc). Also, I keep getting "process com.google.process.gapps has stopped unexpectedly. Please try again" message. How can I fix this issues?
Thank you
miguelrodas said:
Hi, I just installed this ROM and after initial boot, I get a lot of force closes on all the apps that want to run (SetCPU, SuperUser, etc). Also, I keep getting "process com.google.process.gapps has stopped unexpectedly. Please try again" message. How can I fix this issues?
Thank you
Click to expand...
Click to collapse
Did u wipe and erase ext2/3 partition?
pep1t0 said:
Did u wipe and erase ext2/3 partition?
Click to expand...
Click to collapse
I did wipe. i didn't know that I had to erase the ext2/3 partition. Won't that remove the apps saved on the SD card? By the way, how do I erase the ext 2/3 partition?
No Multi Touch No Bluetooth *
I just installed this rom and am still testing it. So far i have not been able to use multi touch in the browser. I am also having problems with bluetooth. It has failed to turn on even after i rebooted.
young3g said:
I just installed this rom and am still testing it. So far i have not been able to use multi touch in the browser. I am also having problems with bluetooth. It has failed to turn on even after i rebooted.
Click to expand...
Click to collapse
i think all the new roms doesn't have multi-touch working...
one touch
will this work with one touch root?
quick note for all you one touch rooters this rom does work with it im currently running it
new build 1.3 on first page
Enjoy !
setenza01 said:
new build 1.3 on first page
Enjoy !
Click to expand...
Click to collapse
Can someone please let me know how 1.3 is? Especially compared to Modaco's 1.5 as that ROM is THE BEST one I've used so far.
Related
READ FIRST - I am no longer updating my ROMs - details.
If you're following the Hero scene, you'll know that I have published a custom ROM based on the 1.73.405.5 shipping ROM. I have a Vodafone Magic (32B) and a T-Mobile G1 kicking around (and HTC want my PR review unit Hero back!), so figured it would be cool to firstly build a really simple way for me to package my ROMs for all 3 devices, and secondly try and produce an update.zip that runs on all 3!
Well, the first step is here, I have the MoDaCo Custom ROM ready to install on your Sapphire 32B device (and a 32A version is available to test).
Things you should know...
- Contents are IDENTICAL to the MoDaCo Custom ROM versions detailed here.
- I have used cyanogen's kernel from 4.0.4 (big respect to cyanogen, he's doing awesome work!)
- Now compcache ready - use this script for a big performance boost!
It has room for improvement, but it runs really sweet already IMHO!
The download link (in update.zip format for flashing in the usual way via recovery image) is at: http://android.modaco.com/content/h...-modaco-custom-rom-hero-to-sapphire-32b-port/
I've packaged Cyanogen's 4.1.11.1 BFS enabled Kernel and wlan.ko as an update.zip too (see above thread) - nandroid backup before applying!
I've quoted some of my original Hero post here, so you know what you're getting. Enjoy!
P
Changelog
2.2.1 [32A only]
32A - fixed boot.img
2.2
Fixed SU and SD card bugs.
2.1.2
Updated busybox
Now compcache ready - use this script for a big performance boost!
2.1.1
Switch to Cyanogen's kernel
Fixed G-Sensor / Compass
Fixed sound
Unified Dream / Sapphire 32B download
2.1
Initial Release
me said:
This ROM is based on the Generic 2.73.405.5 release version of the 'new update' (together with my own optimisations) for the best possible performance! The ROM is now available in 2 versions - 'core' and 'enhanced' by popular request.
Included in both 'core' and 'enhanced' versions
- Rooted with 'adb remount' permission and superuser APK
- A2SD included (fully automatic - thanks cyanogen!) - create a EXT3 partition as your second partition to use. dalvik-cache remains on device. EXT4 is NOT supported.
- Added Jbed Java
- Added Spare Parts (run it and switch the 2 animation types to 'fast' for an even better experience!)
- Added Custom Locale for setting non english Locales
- Added android-wifi-tether 1.52 (props to the developer, this is a great app!)
- Added WMSM
- Added busybox 1.15 - tweaked such that 'get information' in Swapper now works as desired
- Added nano 2.09 - text editor for use in shell mode
- Added terminfo and settings to boot.img to allow nano etc. use
- Added tun.ko file (untested, please report on whether this is useful)
- Added files required for Debian linux
- Moved Quickoffice to data partition to allow easy uninstall
- Deleted 'Learn More' application
- Deleted Maps application - install from the Android Market to always stay up to date
- ROM now includes touch focus in Camera app
- ROM now supports shortcuts using BetterCut (and therefore I assume anycut!) in Rosie
- Silenced boot sound (it's still there and can be reactivated with a file edit)
- You can now check your MoDaCo Custom ROM (MCR) version from the about menu. It will display MCR2.0 (core) or MCR2.0e (enhanced).
- Fix for HTC Peep on Vodafone now available here!
Included in 'enhanced' version only
- Added Business Card Scanner
- Added 'Plurk' client
- Added WAP browser
- Added Chinese IME
- Restored Maps app (for users who cannot install it from the Market)
Click to expand...
Click to collapse
Is this ready to go as far as elimintating the blurry screen AND wifi ??
Just asking as the 1.5 and 1.51 both gave me fuzzys, and applying the update eliminated the fuzzys but took away wifi !
Either way. Thank You SOOO much I knew if I waited you'd give us something nice for the holiday !
You think a wipe would be needed going from 1.51 to 2.1?
Gimpeh said:
You think a wipe would be needed going from 1.51 to 2.1?
Click to expand...
Click to collapse
to avoid any possible issues, I'd suggest a fresh wipe. I didnt add to much after the last rom I flashed so im gonna start over with my sdcard as well
A wipe is always wise, but SHOULDN'T be necessary...
P
Going to try this one now. How is the bluetooth support? Can paired headsets now actually work when calling?
re: support for ANYTHING other than WiFi and Camera (which both work), I don't know!
Let me know stuff that doesn't work, and i'll try to fix it in the next version.
Consider this a starting point...
P
For 32A I recommend the 2.6.29 kernel that redglasses uses on his Hero ROM:
http://www.2shared.com/file/7555649/5881ee4a/myhero-110.html
Might be stuck, d'oh!
So far, did a nandroid, wiped, etc. Updated, rebooted, and after asking for the language and network settings it's sat at a blank screen for some time. Status bar at the top, if left alone and hit the call button the dialer will appear and afterwards you'll see the unlock screen. But it just unlocks back to a blank screen. :/
So far this is the first ROM I've run into that's done this interesting bit. Will maybe reformat SD Card and rewipe, or something.
Nevermind. Rebooted, and it somehow proceeded this time around. Strange, though :/
dont really care for blutooth sound, but will it work for wireless tether ?? thats what I miss from using non hero roms.. having wifi back is also nice !!
Success!
Only noticeable thing is that when you go to far away from the home screen (going into settings, the dialer, etc), and return, it has to reload again for about 10 seconds. But once it's there it's fairly snappy.
Bluetooth pairs and works like it should! I might just hold onto this version of the ROM and tinker with it for a while.
ZiBop said:
Success!
Only noticeable thing is that when you go to far away from the home screen (going into settings, the dialer, etc), and return, it has to reload again for about 10 seconds. But once it's there it's fairly snappy.
Bluetooth pairs and works like it should! I might just hold onto this version of the ROM and tinker with it for a while.
Click to expand...
Click to collapse
have u messed with the swap yet ? 64/60 should help with that or 96/60 perhaps
i just flashed this and still am getting the fuzzys !! grr,, guess i have to flash the update over the rom and loose wifi ??
Modaco if you could shed some light it'd be much appreciated !
WiFi, etc works. Other problem : G Sensors aren't working D'oh
BRAND1SH said:
have u messed with the swap yet ? 64/60 should help with that or 96/60 perhaps
Click to expand...
Click to collapse
My swap's a bit rediculously larger. It's not that bad a lag, but only really noticeable when going back "home" from an application.
No swap or compcache etc. out of the box yet, let's fathom out the best settings together!
P
I'll upload a 32A version for someone to test...
P
modaco said:
No swap or compcache etc. out of the box yet, let's fathom out the best settings together!
P
Click to expand...
Click to collapse
modaco,
I am having all kinds of problems with this rom im still getting a blurry screen, it froze on me 3 times, im stuck in portrait and i keep getting the htc loading screen. I downloaded the file twice to eliminate possiblity of a faulty download as well.
mytouch...amonra 1.2.1, ext3. might have to go back to 1.51 that one worked great
I can confirm that this is running beautifully on my 32A device using redglasses/myhero boot.img and wlan.ko.
Seems to be significantly faster than the 1.73 builds, thank you modaco! Now you just need the 2.84+ build as well
This is a shrunken down hero with barelly anything noticable removed, it is also the first build that has 2 versions, first version needs the special spl and is entirelly on the system partition, 2nd version works on any spl and uses the data partition for apps
Download v2.0 For Any SPL
Download v1.5 For Haykuro SPL/Death SPL/Special SPL
Change Log
V 1.0
-Initial Release
-All APKs Optimized using coolbho3000 method (Thanks)
Download v1.0
v1.1
-Fixed Wifi
-Fixed Sensors
-Fixed Clock Force Close
Download v1.1
v1.2
-More Cleanups
-Added Maxisma's Super Optimized Rosie
-Added Plurk
-Added HTC_IME
-Added Wifi Tether for Root Users
-Added Photo Album/Frame widget
-Added Voice Recorder
-Now includes a HSPL (Hard SPL) version for Non-SpecialSPL users
*There are no differences between standard and hspl version except that the HSPL rom stores system apps in /data/app_s, the actual usage of the rom is exactly the same
*Only the Standard build is nowipe, the Hard SPL build needs a wipe as it uses the phones data partition
Download v1.2 For Haykuro SPL/Death SPL/Special SPL
Download v1.2 HardSPL For the standard SPL/engineering SPL/hard spl
v1.2r2
-Added Compcache (Disabled by default, enable it in user.conf)
Download v1.2r2 For Haykuro SPL/Death SPL/Special SPL
Download v1.2r2 HardSPL For the standard SPL/engineering SPL/hard spl
v1.3
-Added HTC Stocks
-Added Voice Search
-Added Voice Recorder
-Readded LatinIME
-Customized build.prop
-More APK Optimizations
Download v1.3 For Haykuro SPL/Death SPL/Special SPL
Download v1.3 HardSPL For the standard SPL/engineering SPL/hard spl
v1.4 Experimental
-SquashFS on lib, etc, fonts, usr
-Readded Flash
-Hero Bootscreen with Sound
-Added Launcher
-Added Java/J2ME
-Added Teeter
-Added Maps
-Added Additional Clocks
-Added AudioMod G7 v2
-Added Weather Databases, Should fix france weather clock problem
-Added All Hero sounds
-Added QuickOffice
-Added Rosie Wallpapers
-Max CPU Freq set to 528000
Download v1.4 For Haykuro SPL/Death SPL/Special SPL
Download v1.4 HardSPL For the standard SPL/engineering SPL/hard spl
v1.5
-Partly based on Drizzy's DDR v1.5.5
-Added Teeter
-Added Footprints
-Added Spare Parts
-Added Custom Locale
-ReAdded Plurk
-Fixed HTC_IME in Messaging
-Removed LatinIME (Stock Android IME)
Download v1.5 For Haykuro SPL/Death SPL/Special SPL
Download v1.5 HardSPL For the standard SPL/engineering SPL/hard spl
v2.0
-Based on Herver 1.0r3
-Includes New Sense UI from Magic
-Includes Fixed HTC_IME
-Plurk is gone
Download v2.0For Any SPL
Added:
-Jac-Ski 2.6.29 kernel (With BFS)
-Compcache
-Weather APK + Widget
-Clock Widget
-Terminal
-Transparent Notifications from JacHero
-Search Widget
-People Widget
-HTC Clock
-Plurk
-Maxisma's Super Optimized Rosie
-Hero Bootscreen with Sound
-Launcher
-Java/J2ME
-Teeter
-Maps
-Additional Clocks
-AudioMod G7 v2
-BizCardReader
-All Hero sounds
-QuickOffice
-Footprints
-HTC Sync
How to install:
1, Copy update file to sdcard
1b, If using a recovery older than Cyanogen 1.4, rename to update.zip
2, flash from recovery and if first time with this build, alt+w to wipe
3, in adb, type adb shell mount /system/sd; rm -r /system/sd/*
4, Reboot
Known Bugs:
-Bluetooth (This does not work in any build so do not post about this)
-LEDs partially work
-Twitter causes a com.htc.provider force close, this is not the rom, this is due to a problem with twitter
Please email any bugs you find
Requirements:
-SD Card partitioned into 3, FAT, EXT2/3, LinuxSwap
-Any SPL, select right download for your SPL
-Class 6 Micro-SD
Bug Submitting:
Copy this into a PM
Phone:
SPL:
Wipe/NoWipe:
Error:
Possible to reproduce:
Rom Version:
SDCard Size/Class:
Please donate to help me buy a hero
Thanks to: Haykuro, Drizzy, JAC, Ccrowski, Jubeh, coolbho3000, twisted, Over_Hero and everyone who has helped making hero on the G1 possible
All downloads are provided as-is, only install this rom if you understand the risks, i am not responsible for any bricked phones from unexperienced use
Please Search before posting problems
60MB? woah that's way small for Hero lol. like 1/3 i think. how's performance in this?
I would say its as fast if not faster than the modaco port, the system apps being on the internal memory will also help as there no longer sharing the sd card with the swap
will you do this with JACHERO v1.7r2and upload it sometime? I like runnning the hero ROMs w/out the BFS kernel and would really appreciate it
Thanks in advance
you can remove expinit from bin since it's not being called for anything anymore (it's only a few kb though) and the bts binary, that one is used for bluetooth debugging and other tools, but, since bluetooth doesn't work on any hero build, it's safe to remove.
you can also remove all WP_*.db files from etc and just keep WP_0409WWE.db to save space, this will still give you all the locations for location picker.
if you replace libicudata.so in lib from one in an ADP 1.5 build, it should give you back about 2mb more with (apparently) no adverse effects.
I'm working on a slim HTC_IME (I've whipped it down to 1.2 MB) that you could eventually work into this build too, plus I've shrunk other things too where I might be able to fit more of hero into my build. It's also allowed me to make a (mock right now, i'm wrestling the HTC Setup Wizard issue) Hero build that finally fits into the regular spl.
I see you included the DCS*.apk files in /app. I don't include them because they don't seem to do anything, what are they for? Also, did you manage to get the weather working on the clock widget? That's mainly the reason why I didn't include it in my own build.
Lastly, this is exactly the reason I made this build. I wanted to show Hero could be forced into /system and then more knowledgeable people could come and make it better.
just to make sure, the only way you can remove the compcache modules is by unsquashfs modules.sqf and then re mksquash them. Otherwise you're removing a lot of modules important to the function of the ROM, for example netfilter for tethering.
ccyrowski said:
just to make sure, the only way you can remove the compcache modules is by unsquashfs modules.sqf and then re mksquash them. Otherwise you're removing a lot of modules important to the function of the ROM, for example netfilter for tethering.
Click to expand...
Click to collapse
haha yah tethering and possibly other networking issues as well
Great, fast Rom.
RaiderX303 said:
I would say its as fast if not faster than the modaco port, the system apps being on the internal memory will also help as there no longer sharing the sd card with the swap
Click to expand...
Click to collapse
That's a very ballsy thing to say. LOL
Faster or AS fast as MoDaCo????
And what about compared to Tiny??
Wouldn't this need slightly more more memory and require more resources since you've ADDED stuff to Tiny???
wow this thing is only 29 mb. this is really micro
ChrisChavez said:
That's a very ballsy thing to say. LOL
Faster or AS fast as MoDaCo????
And what about compared to Tiny??
Wouldn't this need slightly more more memory and require more resources since you've added stuff to Tiny???
Click to expand...
Click to collapse
haha chris, the modaco fanboy
has anyone used comp cache with this?
Wow first its just "tiny" now we have a "micro", so what's next? A "nano" ???
This is good. Keep them coming.
cx92001 said:
Wow first its just "tiny" now we have a "micro", so what's next? A "nano" ???
This is good. Keep them coming.
Click to expand...
Click to collapse
I'll credit you for naming it
a2sd
Hi, i do not partition my sd card, thus if i want to test out this rom, i would need to go partition my sd card? If i don't i would face a boot loop right? Thanks
the idea behind these is to not necessitate your sd card, though, if you wish to have two partitions (swap and a2sd), these roms will make use of them as you expect them
I flashed it but it got stuck on the g1 screen so I had to go back to the JacxRom. Do I need to partition my sd to get past this? It flashed successfully but it got stuck at the g1 screen.
cx92001 said:
Wow first its just "tiny" now we have a "micro", so what's next? A "nano" ???
This is good. Keep them coming.
Click to expand...
Click to collapse
But isn't this technically BIGGER than Tiny since there's MORE stuff in this??
Anybody???
Will the "Nano" ADD even MORE stuff but somehow imply being smaller too?? LOL
Just curious... =p
how do you install this anyways? is there any requirements or what? can we just flash straight from cm 4.0.4 or need wipe or wha?
Great, very fast rom but unable to start wifi
It almost seems like i'm hijacking this thread, but i'll just answer to this last one and go back to my own . The wlan.ko module is in the wrong place, it has to be in /lib/modules. Open up a command prompt, then type:
Code:
adb remount
adb shell
# cd system/lib
# mkdir modules
# mv wlan.ko modules
# exit
exit
Now reboot your phone and try to enable wlan again, it should work (at least i think it should, been busy finishing the last version of my rom and I havent tested this one)
First thank to all dev's! Particulary bcrook, capychimp, Firerat, panamiankid, infinitybiff, RaiderX303 and dumfuq!!!
Legendroid original ROM
Hi,
after many test and hours, here is the second version of my first ROM!
really, it is a port of Legendroid 1.0.1 Final, ported to 32B and G1 (all SPL).
Don't apply the system update, otherwise, the camera will be broken!
Guide :
1 : wipe data, dalvik-cache, sd ext, battery stats (You can try without wipe, but I don’t recommend)
2 : Set a swap on your sd card using Amon_RA’s recovery (96Mb is perfect for me)
3 : Set an ext partition, then ext2 to ext3, then ext3 to ext4 !!
4 : Flash update !
6 : disable vibrate when using keyboard, how that, it's REALLY perfect!
7 : Say thank if you're happy!
If you will save this ROM, use a BART backup, otherwise, the ROM will not boot when you restore!(Because of the normal backup don't backup the cache partition!)Other, do a nandroid backup and flash the newest version of this ROM over!
Changelog:
v33:
camera fixed
normally, G1 install bug fixed!
A lot of things...!
swappiness=50
it uses THIS kernel (dumfuq's 2.6.34 with multi-tasking)
fast, stable
v31:
NEW BASE! (Legendroid for Hero ROM)
Sense widgets are OK
No Sense crash (work for me, with 96Mb swap....)
HTC widgets (battery,.....) OK
system apps on sd ext in install script (by me!)
fast
122-633Mhz
good battery life
big APN list
3D OK
Wifi OK (for G1 too? normally!)
Sensors OK
FAST
dumfuq's @62 kernel
SMS OK
camera app won't start...
Stable
No FC for me
say me bugs, I will do fixes!
swappinness at 90.....
v28:
pershoot's #30 kernel (576Mhz)
working Wifi for G1 (hoping that!) --edited-- NO... waait for v29..!
MT3G apps 2 sd doesn't copy dalvik to sd, then it's fastest, and smoothest
apps updated! System panel added
v27:
G1 musts be fixed
new kernel (ellie#52)
Wifi musts be OK
OC at 480-614 Mhz stable
faster!
teeter brorken..fix tomorrow!
TasKiller removed
v26:
optimized swap
compcache disabled
CM kernel, if it doesn't got Wifi, use v25
v25:
v21 as base
faster
deleted LWP (live wallpapers)
teeter works for me, but only with with THIS kernel.
apparently, if you don't flash THIS, the cpu works at 384Mhz!
v24:
Rosie.apk (Sense UI) fixed (reverted back from v22....)
Teeter added and working!
compcache (compressed cache) added and enabled!
edited userinit script, cleanest!
v23:
Wifi fixed for G1 (about meuse!)
SMS recept normally fixed (thank to MrFreeman)
Better Rosie.apk
v22:
3D ok
g1 perfect SPL fixed
live wallpapers ok
3d gallery ok
full screen weather preview ok!! Thank to mblaster!!!
Sense isn't perfect, I search a better version of Rosie.apk!
v21:
-smallest release, first boot time is faster
-Wifi musts work with G1 device, it uses a WG (#5) kernel.
-It doesn't got OC, but if you really would an OC kernel, see HERE!(But if Wifi doesn't works after that, it's probably because you've got a G1...)
-It has probably 3D.
v20:
-back to swap.
-G1 fixes, Wifi too(normally....!!)!
-G1 fixes like keyboard.
v191:
-compcache script added
-G1 fixes.
-32B users, you musn't flash this, I don't know if compcache is better than swap...
-CPU overclocked at 672 Mhz at start. If it's too much for you, flash this!(384/614)
v19:
-MARKET FIXED (tried after a Wipe, it works!)
-using this jernel
v18:
-G1 bug FIXED!
-dalvik on sd ext, then, you MUST have an ext partition!!!
-bad Wlan.ko, apply right patch!
v17:
-test release for G1!
v16:
-Market NON fixed
-some apps deleted
v15:
-Market really NOT fixed
-original Friendstream
-false wlan.ko...use a fix!
v14:
-Market bug non fixed...
-Many many things...
-Real overclocking to 576Mhz, before, it wasn't overclocked, just fast!
-Maybe the G1 auto-reboot bug is fixed
-Added some apps
-Hero Led ok!
v13:
- Market bug fixed?
V12:
- Youtube HQ ok
- ALL 32b, G1 Death SPL, Perfect SPL.....(Other SPL?)(using Firerat's cache-hack)
- autokiller app added (need root, then always allow it if a popup appears)
- Overclocked CM kernel
v10:
- Camera fixed
- YouTube HQ fixed
- added some HTC widgets
- the xda app,...
- New WG kernel (WG kernel #5(RAM hack?))
v05:
- First public release!
Click to expand...
Click to collapse
Downloads:
Download the latest version from the Release Database ([URL="http://www.androidspin.com/"]androidspin.com).[/URL]
Or see HERE, to see if it got an older version!
What works:
most things
HTC apps
3d gallery
full screen weather preview
Market
Wifi
GPS
camera
Youtube HQ
FriendStream
Exchange
A lot of language:
English, Français, Italiano, Español, Nederlands, Deutsch, Hebrew, Eλληνικá, Português, Norsk bokmål, Dansk, Svenska, Čeština, Polski, Pycckий/QUOTE]
What does NOT work:
- BT
- Camcorder
Click to expand...
Click to collapse
Thank in advance for you reply!
PS, if you reply an error, please say your SPL, radio, recovery and device.....
w00t
I'd give it a try if camera was working but great work so far! Wifi works so that's awesome
...Why didn't you just edit your first thread? Reported for clutter.
F2 same to me...
wonder
is this ROM 1.5 cupcake or 2.1.
fox12345 said:
is this ROM 1.5 cupcake or 2.1.
Click to expand...
Click to collapse
Its 2.1, legend is from eclair branch.
checking this out
Camera fixed
v10 online!
one of the ****tier roms that dont even flash!!!!!!!!...fix it UPLOADER!!
So the danger spl isn't needed for this rom?
yaadman21 said:
So the danger spl isn't needed for this rom?
Click to expand...
Click to collapse
You do but theres a hack from firerat called cache something, just look for that thread.
I can't seem to install it. It says:
-Can't chown/mod/data/artifex/system/framework (no such file or directory)
-Failure at line 234: set_perm_recorsive 0 0 0755 0644 DATA:artifex/system/framework
Installation aborted.
same here.....gay.............
Error
SlashSpeed said:
I can't seem to install it. It says:
-Can't chown/mod/data/artifex/system/framework (no such file or directory)
-Failure at line 234: set_perm_recorsive 0 0 0755 0644 DATA:artifex/system/framework
Installation aborted.
Click to expand...
Click to collapse
Same here
SlashSpeed said:
I can't seem to install it. It says:
-Can't chown/mod/data/artifex/system/framework (no such file or directory)
-Failure at line 234: set_perm_recorsive 0 0 0755 0644 DATA:artifex/system/framework
Installation aborted.
Click to expand...
Click to collapse
i am also getting this, very sad....
Same Problem. Can't Chown, recursive error, etc. Waiting for re-upload, sounds good on paper though.
Red.
lightninbug said:
one of the ****tier roms that dont even flash!!!!!!!!...fix it UPLOADER!!
Click to expand...
Click to collapse
Make your own ROM then you ungrateful git.
incredulous said:
Make your own ROM then you ungrateful git.
Click to expand...
Click to collapse
I actually have moron... Just no need to up it so everyone could nit-pick it... No need for u to be jumping on my opinion.Its not like I killed this guys Rom by dropping by and *****ing that the rom wont EVEN flash.No need for u to get upset by the way I worded it..I post that the stupid thing doesnt work, to help people out so they dont flash it and get pissed like I did...U prove a perfect example as why I havent upped anything
lightninbug said:
I actually have moron... Just no need to up it so everyone could nit-pick it... No need for u to be jumping on my opinion.Its not like I killed this guys Rom by dropping by and *****ing that the rom wont EVEN flash.No need for u to get upset by the way I worded it..I post that the stupid thing doesnt work, to help people out so they dont flash it and get pissed like I did...U prove a perfect example as why I havent upped anything
Click to expand...
Click to collapse
Just ignore who you responded to... they acting dumb & aint worth the time
incredulous said:
Make your own ROM then you ungrateful git.
Click to expand...
Click to collapse
I think as people of the forum you would at least expect the dev to post something working and actually realize his/her mistake. That's like releasing a tv that has many defects.
[ROM] [v1.3] [FAST] KiNgxKxlicK Slide2G1 "NO LOADING SCREENS" {6/29/10 1:27pm PST}
My G1 was long ago fried, I have no G1/32b. Read my sig if you desire.
First, a foreword:
It is finally here. I have been working on this for sometime. I worked on it for weeks then a month or so only to find it did not boot. Had a syntax error in my init.rc. Well it finally here and it boots! So please enjoy post all bugs with a logcat and enjoy. I will put all the work into this you would expect from me.
ENJOY ALL!
Broken:
* Bluetooth (expected, its a sense ROM)
* Lights (Download HeroLED from the market)
* Browser Flash
Release Name: KiNgxKxlicK Slide2G1
Release Version: 1.3
MD5 Sum: 9b7ba794c5a531cf0aa38788be45ec36
Credits: Cyanogen, CCyrowski, ChiefzReloaded, Stericson, JAC, Eugene373, miketaylor00, Jubeh, Twisted, Fictionless, Shafty, any other dev I forgot to mention, and most importantly, my patient lady for putting up with ma devin'
Base Firmware: 2.1
Radio Required: Any
SPL Required: Death SPL
Partition Layout: Fat 32--EXT 1/2/3/4--Linux-Swap
Wipe Required: Full Wipe update
Special instructions: Linux-Swap partition 160Mb (Let me know if another size works better!)
Download:
Older Versions/Bases:
Patches/Fixes/AddOns:
Just like any other dev, I am not responsible to whatever happens to your phone *surprise*
ChEerS
"I live to DEV another DAY" -My quote
Follow me on Twitter if you like my work: www.twitter.com/kingklick92
Changelog
Version 1.3
- New Base (full wipe)
- Now using Kernel #10! (BIG performance increase)
- Packed in every kernel module you'd need
=- turbo support
=- multi-tasking patch
=- same scheduler as #9
- Using the updated Multi tasking (kernel)
- Added Phone Prioitizer app to speed up incoming calls USE IT *thanks miketaylor00*
- Cleaned up first boot, still takes awhile though
- Cleaned up ramdisk
- Updated framework for loc *thanks russ*
- More I'll add
Version 1.2
- No wipe update
- GPS fixed *thanks for pointing it out gladiator*
- User.conf updated
- Shutdown is fully working! You can power off your device now
- Cleaned up ramdisk
- Edited init.rc for more functionality
- More edits to build.prop
- Dalvik vmemory intake increased
Version 1.1.1
- No wipe update
- May only be a .1 update but IS NECESSARY (much smoother and necessary bug fixes included)
- Camera fixed
- Updated user.conf for optimal performance
- Minor cleanup
- HTC loading screens should be gone
- Removed Bluetooth (broken anyway)
- CPU frequencies updated (576Mhz max)
- Swapped some libs from a previous release
Version 1.1
- No wipe update
- Fifo is set
- Fifo=1
- Removed Meltus Audio Hack
- Radio tweaks
- Data tweaks
- Added Swype
- Updated framework for browser fix *thanks ennatefox*
- Updated libs
- Disable Browser flash, it is broken and will crash browser
- Wifi is fixed (wifi fix not needed)
- Updated build.prop
- Testers have said 160Mb Swap is working great
- More I will add
Version 1.0
- First Mytouch slide release
- Using optimzied apk's, but more to come as usual *thanks russ*
- Kept it old school, usual King ROM layout
- Rosie is the fastest I have seen it on any sense build
- Cleaning things up on first boot
- Give first boot plenty of time, it takes awhile
- Fixing Permissions on each boot
- Auto aligning everything
- Using my latest kernel #9 *fastest kernel of mine yet*
- Updated Ackprash Nexus boot animation
- Kernel has overclocking capabilities!
- Everything works that you would expect (wifi, gps, etc)
- Three usual partitions required (Fat32/EXT1-2-3-4/Linux-Swap)
- A2sd is automatic! Just have that second EXT partition
- Linux-swap is automatic! Just have that third Linux Swap partition 150Mb+ (Testers let me know what size is best please)
- Init tweaks all done by yours truly
- Using my Ramdisk
- Multi Touch enabled and is system wide
- User.conf called on and enabled
- Clean Shutdown and reboot working
- Mapped correctly for G1
- Mapped correctly for Sapphire 32b
- Some apps moved to /data for your ease (to remove them)
- Added AppPack from T-Mo
- Added Astro File Manager (Nope, I haven't changed!)
- Added Wireless tether
- Added Wired tether
- More I will remember!
Do faves and genius button function correctly?
YAY FINALLY!!!
downloading,flashing, will let ya knwo how it turns out!
how about a port for 32A sapphire?
Browser
Can anyone confirm browser working? Broken says only lights..
Wait for confirmation than flashingggggggggg =)
lol he hasnt even finished uploading yet, so cant confirm or deny anything
kingofyo1 said:
lol he hasnt even finished uploading yet, so cant confirm or deny anything
Click to expand...
Click to collapse
my testers havent said anything about browser being broken....
well from flashing all of kings other roms..this one should be a real treat! So glad Cyanogen part 2 (kingklick) is back!!!!!
lights?
does that mean the LED's? or like backlight or backlight for keyboard, all of the above?
oh and btw hate to get killed on this, but im guessing BlueTooth isnt working still?
I love your work king i just want to know if i can rely on the rom for business.
King, you are THE man! i can't wait to try this out... Already nandroid'd
Bzerk1 said:
lights?
does that mean the LED's? or like backlight or backlight for keyboard, all of the above?
Click to expand...
Click to collapse
Most likely all of the above, just like the legend, Sense UI ROMs out. Theres an app on the market............cant think of the name but should do the trick.
Is this...fast?
MotoMudder77 said:
Most likely all of the above, just like the legend, Sense UI ROMs out. Theres an app on the market............cant think of the name but should do the trick.
Click to expand...
Click to collapse
Heroled, i believe it is...
How's the battery...
edited.
haha kingof just read that dl was still uploading lol and no bt does not work still because its still a Sense build.
is king cool with you posting that?
smjfosho said:
is king cool with you posting that?
Click to expand...
Click to collapse
lol idk. unquote me please. it was in his 4shared folder tho... its public.
Prediction...
If i may make a prediction here... I believe this thread will be a very active hot thread very fast and reach over 10 pages in a half hour its 5:12 Eastern Time for me so lets just be safe and extend it a little longer 6pm this thread will hit like 30 pages lol
"It's Good To Be The King"
Kings Back!!!
NOTE: THIS IS NOT MY WORK. IM ONLY POSTING IT HERE SINCE IS HASNT BEEN POSTED YET, ALL CREDITS GOES TO KING
First, a foreword:
It is finally here. I have been working on this for sometime. I worked on it for weeks then a month or so only to find it did not boot. Had a syntax error in my init.rc. Well it finally here and it boots! So please enjoy post all bugs with a logcat and enjoy. I will put all the work into this you would expect from me.
ENJOY ALL!
Broken:
* Bluetooth (expected, its a sense ROM)
* Lights (Download HeroLED from the market)
* Browser Flash
Release Name: KiNgxKxlicK Slide2G1
Release Version: 1.5
MD5 Sum: 2218c60ebebf26330a34b1eed2a5d61d
Credits: Cyanogen, CCyrowski, ChiefzReloaded, Stericson, Twisted, Fictionless, Shafty, any other dev I forgot to mention, and most importantly, my patient lady for putting up with ma devin'
Base Firmware: 2.1
Radio Required: Any
SPL Required: Death SPL
Partition Layout: Fat 32--EXT 1/2/3/4--Linux-Swap
Wipe Required: Full Wipe update
Special instructions: Linux-Swap partition 160Mb+ (Let me know if another size works better!)
Download: Latest Download Version 1.5: 4shared
Older Versions/Bases: N/A
Patches/Fixes/AddOns: Meltus Audio Hack - No wipe update: http://www.4shared.com/file/KC5UZcFO/Slide_MeltusHack_King_signed.html
Just like any other dev, I am not responsible to whatever happens to your phone *surprise*
ChEerS
"I live to DEV another DAY" -My quote
Follow me on Twitter if you like my work: http://www.twitter.com/kingklick92
Changelog
Version 1.5
- Full wipe build
- If you get loading screens on this build...
- Now using kernel #11 2.6.34
- OC capable up to 576Mhz! STABLE
- Genius Button fixed! *Be sure to thank Nick Stewart*
- Voice Search fixed
- Accelerometer is fixed for g1
- Accelerometer is fixed for 32b
- GPS is fully working
- Dalvik memory intake increased
- More optimization
- User.conf updated
- Lowered swappiness for stability over time
- More I will add
Version 1.4
- New base full wipe update
- Fasted release yet - I AM SERIOUS (getting towards the end of development until A newer leak I am afraid)
- Rougly 75% optimized
- Auto rotate fixed for g1
- Auto rotate fixed for 32b
- Fixed some syntax errors in vital scripts
- Cleaned up each boot
- Fixed Permissions issues
- Cleaned up build
Version 1.3
- New Base (full wipe)
- Now using Kernel #10! (BIG performance increase)
- Packed in every kernel module you'd need
=- turbo support
=- multi-tasking patch
=- same scheduler as #9
- Using the updated Multi tasking (kernel)
- Added Phone Prioitizer app to speed up incoming calls USE IT *thanks miketaylor00*
- Cleaned up first boot, still takes awhile though
- Cleaned up ramdisk
- Updated framework for loc *thanks russ*
- More I'll add
Version 1.2
- No wipe update
- GPS fixed *thanks for pointing it out gladiator*
- User.conf updated
- Shutdown is fully working! You can power off your device now
- Cleaned up ramdisk
- Edited init.rc for more functionality
- More edits to build.prop
- Dalvik vmemory intake increased
Version 1.1.1
- No wipe update
- May only be a .1 update but IS NECESSARY (much smoother and necessary bug fixes included)
- Camera fixed
- Updated user.conf for optimal performance
- Minor cleanup
- HTC loading screens should be gone
- Removed Bluetooth (broken anyway)
- CPU frequencies updated (576Mhz max)
- Swapped some libs from a previous release
Version 1.1
- No wipe update
- Fifo is set
- Fifo=1
- Removed Meltus Audio Hack
- Radio tweaks
- Data tweaks
- Added Swype
- Updated framework for browser fix *thanks ennatefox*
- Updated libs
- Disable Browser flash, it is broken and will crash browser
- Wifi is fixed (wifi fix not needed)
- Updated build.prop
- Testers have said 160Mb Swap is working great
- More I will add
Version 1.0
- First Mytouch slide release
- Using optimzied apk's, but more to come as usual *thanks russ*
- Kept it old school, usual King ROM layout
- Rosie is the fastest I have seen it on any sense build
- Cleaning things up on first boot
- Give first boot plenty of time, it takes awhile
- Fixing Permissions on each boot
- Auto aligning everything
- Using my latest kernel #9 *fastest kernel of mine yet*
- Updated Ackprash Nexus boot animation
- Kernel has overclocking capabilities!
- Everything works that you would expect (wifi, gps, etc)
- Three usual partitions required (Fat32/EXT1-2-3-4/Linux-Swap)
- A2sd is automatic! Just have that second EXT partition
- Linux-swap is automatic! Just have that third Linux Swap partition 150Mb+ (Testers let me know what size is best please)
- Init tweaks all done by yours truly
- Using my Ramdisk
- Multi Touch enabled and is system wide
- User.conf called on and enabled
- Clean Shutdown and reboot working
- Mapped correctly for G1
- Mapped correctly for Sapphire 32b
- Some apps moved to /data for your ease (to remove them)
- Added AppPack from T-Mo
- Added Astro File Manager (Nope, I haven't changed!)
- Added Wireless tether
- Added Wired tether
- More I will remember!
Video Review is up !!
http://www.youtube.com/watch?v=hEZTGJM5MRw
Sorry for the quality. the quality was great until i uploaded it.. thanks to youtube the quality dropped down
WOW i just made some pictures and camera and everything is sooooo fast man. loading up gallery and photo reviews is unbelievable fast man!!!! try it out now!
//Nick
stable/fast ? really ?
And:
Code:
Not Found
The requested URL /uploads/KiNgxKxlick-Slide2G1-v1.5_signed.torrent was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
Use this link:
4shared
ANtiHazarD said:
stable/fast ? really ?
And:
Code:
Not Found
The requested URL /uploads/KiNgxKxlick-Slide2G1-v1.5_signed.torrent was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
Use this link:
4shared
Click to expand...
Click to collapse
Im uploading a video
so see yourself. i actually never use those blurry slow sense roms but this one is actually quite nice :O upload is at 50%
Thank you for the new link
ok will download and see how it goes
Im using this rom with 512 MB EXT and 128MB of swap
and please make sure you press: Repair sd EXt partition in recovery otherwise it may not boot.
I still get "loading screen" on my phone....
chickenz88 said:
I still get "loading screen" on my phone....
Click to expand...
Click to collapse
hmm i dont get it.
maybe try this:
go into spareparts.
then thick 'lock home in memory'
this will attempt to keep the homescreen in memory
Yes it has been posted before and please use the search.
It did not work then and it still does not work. same old rom same old problems...
I wonder if kingdick is still charging if you want support lol.
deuse said:
Yes it has been posted before and please use the search.
It did not work then and it still does not work. same old rom same old problems...
I wonder if kingdick is still charging if you want support lol.
Click to expand...
Click to collapse
What you mean?
yes the old version 1.3 was posted. but not 1.5!
and what 'dont work'?
everything work great !
and that old is the rom not.
so wut if its maybe A LITTLE older?
if it says old, it wont mean that its bad.
nickislauw said:
hmm i dont get it.
maybe try this:
go into spareparts.
then thick 'lock home in memory'
this will attempt to keep the homescreen in memory
Click to expand...
Click to collapse
oh.....I will try later, thnx mate.
but did u try open many applications at the same time? eg, try to open camera, go album n load all photos in ur album,then press home button. are u sure it still not get "loading screen"?
.....
chickenz88 said:
oh.....I will try later, thnx mate.
but did u try open many applications at the same time? eg, try to open camera, go album n load all photos in ur album,then press home button. are u sure it still not get "loading screen"?
.....
Click to expand...
Click to collapse
nope
still super fast and stable
nickislauw said:
nope
still super fast and stable
Click to expand...
Click to collapse
im going to flash this later tonight, but maybe you can fill us in on how your phones partitioned, and how you wiped and flashed.
Aren't we NOT allowed to post king's stuff here?
protomanez said:
Aren't we NOT allowed to post king's stuff here?
Click to expand...
Click to collapse
I'm guessing the OP didn't know. No biggie, admins can just close it down.
protomanez said:
Aren't we NOT allowed to post king's stuff here?
Click to expand...
Click to collapse
Last i remembered, they cleared him. since the Aria2G1 rom
nickislauw said:
hmm i dont get it.
maybe try this:
go into spareparts.
then thick 'lock home in memory'
this will attempt to keep the homescreen in memory
Click to expand...
Click to collapse
I stick "lock home in memory" but still get "loading screen", Can you tell me ur settings sdcard? like swapness, ext, partition.....
chickenz88 said:
I stick "lock home in memory" but still get "loading screen", Can you tell me ur settings sdcard? like swapness, ext, partition.....
Click to expand...
Click to collapse
128mb swap en 512 mb ext
im only getting the loading screen when i am on ebuddy and then go to the opera browser and then press home.
when do you get it ??
I load all my photos, ~1000p, go home and get Loading.....Maybe no way to fix it, except Developer....
chickenz88 said:
I load all my photos, ~1000p, go home and get Loading.....Maybe no way to fix it, except Developer....
Click to expand...
Click to collapse
my photos are just loading great...
sorry then i dont know.
i couldnt get any wifi after flashing the patch