NOTE: THIS IS NOT MY WORK. IM ONLY POSTING IT HERE SINCE IS HASNT BEEN POSTED YET, ALL CREDITS GOES TO KING
First, a foreword:
It is finally here. I have been working on this for sometime. I worked on it for weeks then a month or so only to find it did not boot. Had a syntax error in my init.rc. Well it finally here and it boots! So please enjoy post all bugs with a logcat and enjoy. I will put all the work into this you would expect from me.
ENJOY ALL!
Broken:
* Bluetooth (expected, its a sense ROM)
* Lights (Download HeroLED from the market)
* Browser Flash
Release Name: KiNgxKxlicK Slide2G1
Release Version: 1.5
MD5 Sum: 2218c60ebebf26330a34b1eed2a5d61d
Credits: Cyanogen, CCyrowski, ChiefzReloaded, Stericson, Twisted, Fictionless, Shafty, any other dev I forgot to mention, and most importantly, my patient lady for putting up with ma devin'
Base Firmware: 2.1
Radio Required: Any
SPL Required: Death SPL
Partition Layout: Fat 32--EXT 1/2/3/4--Linux-Swap
Wipe Required: Full Wipe update
Special instructions: Linux-Swap partition 160Mb+ (Let me know if another size works better!)
Download: Latest Download Version 1.5: 4shared
Older Versions/Bases: N/A
Patches/Fixes/AddOns: Meltus Audio Hack - No wipe update: http://www.4shared.com/file/KC5UZcFO/Slide_MeltusHack_King_signed.html
Just like any other dev, I am not responsible to whatever happens to your phone *surprise*
ChEerS
"I live to DEV another DAY" -My quote
Follow me on Twitter if you like my work: http://www.twitter.com/kingklick92
Changelog
Version 1.5
- Full wipe build
- If you get loading screens on this build...
- Now using kernel #11 2.6.34
- OC capable up to 576Mhz! STABLE
- Genius Button fixed! *Be sure to thank Nick Stewart*
- Voice Search fixed
- Accelerometer is fixed for g1
- Accelerometer is fixed for 32b
- GPS is fully working
- Dalvik memory intake increased
- More optimization
- User.conf updated
- Lowered swappiness for stability over time
- More I will add
Version 1.4
- New base full wipe update
- Fasted release yet - I AM SERIOUS (getting towards the end of development until A newer leak I am afraid)
- Rougly 75% optimized
- Auto rotate fixed for g1
- Auto rotate fixed for 32b
- Fixed some syntax errors in vital scripts
- Cleaned up each boot
- Fixed Permissions issues
- Cleaned up build
Version 1.3
- New Base (full wipe)
- Now using Kernel #10! (BIG performance increase)
- Packed in every kernel module you'd need
=- turbo support
=- multi-tasking patch
=- same scheduler as #9
- Using the updated Multi tasking (kernel)
- Added Phone Prioitizer app to speed up incoming calls USE IT *thanks miketaylor00*
- Cleaned up first boot, still takes awhile though
- Cleaned up ramdisk
- Updated framework for loc *thanks russ*
- More I'll add
Version 1.2
- No wipe update
- GPS fixed *thanks for pointing it out gladiator*
- User.conf updated
- Shutdown is fully working! You can power off your device now
- Cleaned up ramdisk
- Edited init.rc for more functionality
- More edits to build.prop
- Dalvik vmemory intake increased
Version 1.1.1
- No wipe update
- May only be a .1 update but IS NECESSARY (much smoother and necessary bug fixes included)
- Camera fixed
- Updated user.conf for optimal performance
- Minor cleanup
- HTC loading screens should be gone
- Removed Bluetooth (broken anyway)
- CPU frequencies updated (576Mhz max)
- Swapped some libs from a previous release
Version 1.1
- No wipe update
- Fifo is set
- Fifo=1
- Removed Meltus Audio Hack
- Radio tweaks
- Data tweaks
- Added Swype
- Updated framework for browser fix *thanks ennatefox*
- Updated libs
- Disable Browser flash, it is broken and will crash browser
- Wifi is fixed (wifi fix not needed)
- Updated build.prop
- Testers have said 160Mb Swap is working great
- More I will add
Version 1.0
- First Mytouch slide release
- Using optimzied apk's, but more to come as usual *thanks russ*
- Kept it old school, usual King ROM layout
- Rosie is the fastest I have seen it on any sense build
- Cleaning things up on first boot
- Give first boot plenty of time, it takes awhile
- Fixing Permissions on each boot
- Auto aligning everything
- Using my latest kernel #9 *fastest kernel of mine yet*
- Updated Ackprash Nexus boot animation
- Kernel has overclocking capabilities!
- Everything works that you would expect (wifi, gps, etc)
- Three usual partitions required (Fat32/EXT1-2-3-4/Linux-Swap)
- A2sd is automatic! Just have that second EXT partition
- Linux-swap is automatic! Just have that third Linux Swap partition 150Mb+ (Testers let me know what size is best please)
- Init tweaks all done by yours truly
- Using my Ramdisk
- Multi Touch enabled and is system wide
- User.conf called on and enabled
- Clean Shutdown and reboot working
- Mapped correctly for G1
- Mapped correctly for Sapphire 32b
- Some apps moved to /data for your ease (to remove them)
- Added AppPack from T-Mo
- Added Astro File Manager (Nope, I haven't changed!)
- Added Wireless tether
- Added Wired tether
- More I will remember!
Video Review is up !!
http://www.youtube.com/watch?v=hEZTGJM5MRw
Sorry for the quality. the quality was great until i uploaded it.. thanks to youtube the quality dropped down
WOW i just made some pictures and camera and everything is sooooo fast man. loading up gallery and photo reviews is unbelievable fast man!!!! try it out now!
//Nick
stable/fast ? really ?
And:
Code:
Not Found
The requested URL /uploads/KiNgxKxlick-Slide2G1-v1.5_signed.torrent was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
Use this link:
4shared
ANtiHazarD said:
stable/fast ? really ?
And:
Code:
Not Found
The requested URL /uploads/KiNgxKxlick-Slide2G1-v1.5_signed.torrent was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
Use this link:
4shared
Click to expand...
Click to collapse
Im uploading a video
so see yourself. i actually never use those blurry slow sense roms but this one is actually quite nice :O upload is at 50%
Thank you for the new link
ok will download and see how it goes
Im using this rom with 512 MB EXT and 128MB of swap
and please make sure you press: Repair sd EXt partition in recovery otherwise it may not boot.
I still get "loading screen" on my phone....
chickenz88 said:
I still get "loading screen" on my phone....
Click to expand...
Click to collapse
hmm i dont get it.
maybe try this:
go into spareparts.
then thick 'lock home in memory'
this will attempt to keep the homescreen in memory
Yes it has been posted before and please use the search.
It did not work then and it still does not work. same old rom same old problems...
I wonder if kingdick is still charging if you want support lol.
deuse said:
Yes it has been posted before and please use the search.
It did not work then and it still does not work. same old rom same old problems...
I wonder if kingdick is still charging if you want support lol.
Click to expand...
Click to collapse
What you mean?
yes the old version 1.3 was posted. but not 1.5!
and what 'dont work'?
everything work great !
and that old is the rom not.
so wut if its maybe A LITTLE older?
if it says old, it wont mean that its bad.
nickislauw said:
hmm i dont get it.
maybe try this:
go into spareparts.
then thick 'lock home in memory'
this will attempt to keep the homescreen in memory
Click to expand...
Click to collapse
oh.....I will try later, thnx mate.
but did u try open many applications at the same time? eg, try to open camera, go album n load all photos in ur album,then press home button. are u sure it still not get "loading screen"?
.....
chickenz88 said:
oh.....I will try later, thnx mate.
but did u try open many applications at the same time? eg, try to open camera, go album n load all photos in ur album,then press home button. are u sure it still not get "loading screen"?
.....
Click to expand...
Click to collapse
nope
still super fast and stable
nickislauw said:
nope
still super fast and stable
Click to expand...
Click to collapse
im going to flash this later tonight, but maybe you can fill us in on how your phones partitioned, and how you wiped and flashed.
Aren't we NOT allowed to post king's stuff here?
protomanez said:
Aren't we NOT allowed to post king's stuff here?
Click to expand...
Click to collapse
I'm guessing the OP didn't know. No biggie, admins can just close it down.
protomanez said:
Aren't we NOT allowed to post king's stuff here?
Click to expand...
Click to collapse
Last i remembered, they cleared him. since the Aria2G1 rom
nickislauw said:
hmm i dont get it.
maybe try this:
go into spareparts.
then thick 'lock home in memory'
this will attempt to keep the homescreen in memory
Click to expand...
Click to collapse
I stick "lock home in memory" but still get "loading screen", Can you tell me ur settings sdcard? like swapness, ext, partition.....
chickenz88 said:
I stick "lock home in memory" but still get "loading screen", Can you tell me ur settings sdcard? like swapness, ext, partition.....
Click to expand...
Click to collapse
128mb swap en 512 mb ext
im only getting the loading screen when i am on ebuddy and then go to the opera browser and then press home.
when do you get it ??
I load all my photos, ~1000p, go home and get Loading.....Maybe no way to fix it, except Developer....
chickenz88 said:
I load all my photos, ~1000p, go home and get Loading.....Maybe no way to fix it, except Developer....
Click to expand...
Click to collapse
my photos are just loading great...
sorry then i dont know.
i couldnt get any wifi after flashing the patch
Related
READ FIRST - I am no longer updating my ROMs - details.
If you're following the Hero scene, you'll know that I have published a custom ROM based on the 1.73.405.5 shipping ROM. I have a Vodafone Magic (32B) and a T-Mobile G1 kicking around (and HTC want my PR review unit Hero back!), so figured it would be cool to firstly build a really simple way for me to package my ROMs for all 3 devices, and secondly try and produce an update.zip that runs on all 3!
Well, the first step is here, I have the MoDaCo Custom ROM ready to install on your Sapphire 32B device (and a 32A version is available to test).
Things you should know...
- Contents are IDENTICAL to the MoDaCo Custom ROM versions detailed here.
- I have used cyanogen's kernel from 4.0.4 (big respect to cyanogen, he's doing awesome work!)
- Now compcache ready - use this script for a big performance boost!
It has room for improvement, but it runs really sweet already IMHO!
The download link (in update.zip format for flashing in the usual way via recovery image) is at: http://android.modaco.com/content/h...-modaco-custom-rom-hero-to-sapphire-32b-port/
I've packaged Cyanogen's 4.1.11.1 BFS enabled Kernel and wlan.ko as an update.zip too (see above thread) - nandroid backup before applying!
I've quoted some of my original Hero post here, so you know what you're getting. Enjoy!
P
Changelog
2.2.1 [32A only]
32A - fixed boot.img
2.2
Fixed SU and SD card bugs.
2.1.2
Updated busybox
Now compcache ready - use this script for a big performance boost!
2.1.1
Switch to Cyanogen's kernel
Fixed G-Sensor / Compass
Fixed sound
Unified Dream / Sapphire 32B download
2.1
Initial Release
me said:
This ROM is based on the Generic 2.73.405.5 release version of the 'new update' (together with my own optimisations) for the best possible performance! The ROM is now available in 2 versions - 'core' and 'enhanced' by popular request.
Included in both 'core' and 'enhanced' versions
- Rooted with 'adb remount' permission and superuser APK
- A2SD included (fully automatic - thanks cyanogen!) - create a EXT3 partition as your second partition to use. dalvik-cache remains on device. EXT4 is NOT supported.
- Added Jbed Java
- Added Spare Parts (run it and switch the 2 animation types to 'fast' for an even better experience!)
- Added Custom Locale for setting non english Locales
- Added android-wifi-tether 1.52 (props to the developer, this is a great app!)
- Added WMSM
- Added busybox 1.15 - tweaked such that 'get information' in Swapper now works as desired
- Added nano 2.09 - text editor for use in shell mode
- Added terminfo and settings to boot.img to allow nano etc. use
- Added tun.ko file (untested, please report on whether this is useful)
- Added files required for Debian linux
- Moved Quickoffice to data partition to allow easy uninstall
- Deleted 'Learn More' application
- Deleted Maps application - install from the Android Market to always stay up to date
- ROM now includes touch focus in Camera app
- ROM now supports shortcuts using BetterCut (and therefore I assume anycut!) in Rosie
- Silenced boot sound (it's still there and can be reactivated with a file edit)
- You can now check your MoDaCo Custom ROM (MCR) version from the about menu. It will display MCR2.0 (core) or MCR2.0e (enhanced).
- Fix for HTC Peep on Vodafone now available here!
Included in 'enhanced' version only
- Added Business Card Scanner
- Added 'Plurk' client
- Added WAP browser
- Added Chinese IME
- Restored Maps app (for users who cannot install it from the Market)
Click to expand...
Click to collapse
Is this ready to go as far as elimintating the blurry screen AND wifi ??
Just asking as the 1.5 and 1.51 both gave me fuzzys, and applying the update eliminated the fuzzys but took away wifi !
Either way. Thank You SOOO much I knew if I waited you'd give us something nice for the holiday !
You think a wipe would be needed going from 1.51 to 2.1?
Gimpeh said:
You think a wipe would be needed going from 1.51 to 2.1?
Click to expand...
Click to collapse
to avoid any possible issues, I'd suggest a fresh wipe. I didnt add to much after the last rom I flashed so im gonna start over with my sdcard as well
A wipe is always wise, but SHOULDN'T be necessary...
P
Going to try this one now. How is the bluetooth support? Can paired headsets now actually work when calling?
re: support for ANYTHING other than WiFi and Camera (which both work), I don't know!
Let me know stuff that doesn't work, and i'll try to fix it in the next version.
Consider this a starting point...
P
For 32A I recommend the 2.6.29 kernel that redglasses uses on his Hero ROM:
http://www.2shared.com/file/7555649/5881ee4a/myhero-110.html
Might be stuck, d'oh!
So far, did a nandroid, wiped, etc. Updated, rebooted, and after asking for the language and network settings it's sat at a blank screen for some time. Status bar at the top, if left alone and hit the call button the dialer will appear and afterwards you'll see the unlock screen. But it just unlocks back to a blank screen. :/
So far this is the first ROM I've run into that's done this interesting bit. Will maybe reformat SD Card and rewipe, or something.
Nevermind. Rebooted, and it somehow proceeded this time around. Strange, though :/
dont really care for blutooth sound, but will it work for wireless tether ?? thats what I miss from using non hero roms.. having wifi back is also nice !!
Success!
Only noticeable thing is that when you go to far away from the home screen (going into settings, the dialer, etc), and return, it has to reload again for about 10 seconds. But once it's there it's fairly snappy.
Bluetooth pairs and works like it should! I might just hold onto this version of the ROM and tinker with it for a while.
ZiBop said:
Success!
Only noticeable thing is that when you go to far away from the home screen (going into settings, the dialer, etc), and return, it has to reload again for about 10 seconds. But once it's there it's fairly snappy.
Bluetooth pairs and works like it should! I might just hold onto this version of the ROM and tinker with it for a while.
Click to expand...
Click to collapse
have u messed with the swap yet ? 64/60 should help with that or 96/60 perhaps
i just flashed this and still am getting the fuzzys !! grr,, guess i have to flash the update over the rom and loose wifi ??
Modaco if you could shed some light it'd be much appreciated !
WiFi, etc works. Other problem : G Sensors aren't working D'oh
BRAND1SH said:
have u messed with the swap yet ? 64/60 should help with that or 96/60 perhaps
Click to expand...
Click to collapse
My swap's a bit rediculously larger. It's not that bad a lag, but only really noticeable when going back "home" from an application.
No swap or compcache etc. out of the box yet, let's fathom out the best settings together!
P
I'll upload a 32A version for someone to test...
P
modaco said:
No swap or compcache etc. out of the box yet, let's fathom out the best settings together!
P
Click to expand...
Click to collapse
modaco,
I am having all kinds of problems with this rom im still getting a blurry screen, it froze on me 3 times, im stuck in portrait and i keep getting the htc loading screen. I downloaded the file twice to eliminate possiblity of a faulty download as well.
mytouch...amonra 1.2.1, ext3. might have to go back to 1.51 that one worked great
I can confirm that this is running beautifully on my 32A device using redglasses/myhero boot.img and wlan.ko.
Seems to be significantly faster than the 1.73 builds, thank you modaco! Now you just need the 2.84+ build as well
OpenEclair is a community ROM based on the AOSP 2.1 source code (with lots of Cyanogen mixed in).
The goal of OpenEclair is to bring to the community a fast and stable Eclair 2.1 ROM, with contributions from numerous ROM developers.
Contributors
Developer - Wes Garner - Twitter
Developer - ctso - Twitter
Porters - Brian Cook, Piotr Maksymiuk (Movi)
Complete OpenEclair Credits List
http://short.to/18h0a
Bandwidth - A HUGE thanks to Simon, Allen, and everyone from AndroidSPIN for hosting the ROMs!
Click to expand...
Click to collapse
Features
- AOSP 2.1r2 Eclair
- Multiple Kernels
- Live Wallpapers
- CompCache/Swap via SpareParts (including size!)
- Swap via SpareParts
- Supports G1/MT3G
- Automatic Apps2SD on G1
- 5 Screen Launcher and Launcher2 from NexusOne
- New Customizable MMS
- WG-Kernel 5 v0.8
Click to expand...
Click to collapse
There has been more and more work done on OpenEclair even though this release is small, there is much more to come. If you want to donate, please do - that really does give us encouragement to spend so much time on this
Donate to Wes Garner
Donate to Chris Soyars
Downloads
OpenEclair v1.3.0.1
Download:http://androidspin.com/forum/showthread.php?t=2296
Note: Before posting an issue in the thread, please check the issue tracker, as we probably already know about it!
Click to expand...
Click to collapse
Issue Tracker
Before posting an issue please do your best to make sure it has not already been reported. A good idea is to check the "Known Issues" section below.
Issue Tracker on Google Code
Please post all issues in the Google Code Issue Tracker. This thread can be a great area for support, but any bugs should be reported at Google Code so they do not get lost.
Thanks!
Click to expand...
Click to collapse
Disclaimer
We are not responsible for bricking your phone! Also, this is an open source project, but please give credit where it`s due and please do not post our full builds without asking. We would also love to know if anyone is using our ROM on other devices!
Click to expand...
Click to collapse
Known Issues:
- LWPs break when using 3D Kernel
- Userinit is still being overridden by SpareParts
- CompCache changes in SpareParts require reboot
- Video still not working
- Menu to unlock is not enabled
- Phone app's on-screen touch buttons may cause problems
Click to expand...
Click to collapse
Change Log
OpenEclair - v1.3.0.1 - 04/02/2010
- Fixed Framework bug
OpenEclair - v1.3.0 - 04/02/2010
- WG-Kernel 5 v0.8:
* Completely fresh and clean
* Fixed Bluetooth
* Has option to use 3D or RAMHack
* Updated WiFi Drivers to help battery life
- Does NOT require DangerSPL (also fixes install errors)
- Fixed CompCache problems where would not load or would require reboot
- Fixed issues with Su
- Removed all the duplicate ringtones (may have to reset your notification and ringtone sounds)
- Fixed GenieWidget
- Fixed Market troubles
OpenEclair - v1.2.2 - 02/25/2010
- New version of kernel with serious SPEED INCREASES
- DangerSPL not required
- Fixed CompCache/MemCtl (keep in mind, userinit is still being overridden and changes require restart)
- Amazing BootAnimation by MINUS_Stl
- ALL LWPs should be working now (including Smoke)
- Facebook Sync is fixed
- Added latest Google Maps 4.0
- YouTube app is there, but there is no video support yet
- Random Apps disappearing should be fixed http://short.to/18we3
- Bouncy Menus and other visual fixes
- Fixed all APN bugs causing no data
- Added WiFi Tether
- Latest Phone.apk by Cytown / Contacts.apk by Wysie
- Added all EXTfs binaries
- Many bug fixes fixed from Google Code
- Latest AOSP Merges
- Other changes that can't be remembered
OpenEclair - v1.2.1 - 02/13/2010
- Please wipe. (though may not be required)
- Multiple kernels to select from -- BFS/CFS, 10mb RAM Hack or not
- Nexus One OTA Update (Android 2.1_r2)
- MT in Browser
- Fixed disappearing icon issues.
- Fixed LWPs (Except for Smoke LWP)
- Includes Launcher2, to use select "Launcher" instead of "Home" when prompted.
- LWPs are interactive while using Launcher2, though slightly buggy.
- New MMS Settings: 600kb MMS Size Limit, Max Resolution is 2048x1536, Text will not convert to MMS until 10pgs has been reached (versus 4)
- Includes HTC_IME
- Fixed Camera from the Beta`s
- Includes latest WG-Kernel v3-beta
- Include Meltus`s AudioMod v2r2
- Removed: Eugene`s Overclocking
- More that neither of us remember
OpenEclair - v1.1.5 BETA - 02/08/2010
- No Wipe
- No you did not miss 1.1.2, 1.1.3, and 1.1.4. They were test builds.
- Kernel: CPU Frequency modifications by Eugene
- Kernel: Overclocked to 580MHz by default.
- Kernel: Bug fixes from Nexus One MSM Kernel
- Compcache: Upgraded to v0.6.2
- Added MT Maps from Nexus One update
- Dalvik Changes (JIT is extremely unstable, switched to donut dalvik for now)
- Firstboot script changes
OpenEclair - v1.1.1 BETA - 02/02/2010
- Reverted JIT (No longer using JIT - causes too much instability)
- Added EXT tools.
- Readded DangerSPL Requirement
OpenEclair - v1.1 BETA - 02/01/2010
- New Apps2SD (disables Apps2SD on MT3G)
- Added Passion Google Apps
- Fixed "insufficient storage" issue.
- Switched to WG-Kernel
- Optimized Launcher (thanks dumbbestcrayon)
- Fixed Music button on Desk Clock
- Removed DangerSPL requirement
- Added Swap settings to SpareParts
- Default compcache size set to 32MB
- Fixed keystore errors.
- Added rwsystem/rosystem
- Fixed "pm: not found" errors.
- Complete recompile from AOSP/Cyanogen
- Removed CM Updater (will be added again in a future release)
OpenEclair - v1.0.1 - 02/02/2010
- Fixed "insufficient storage" problem when installing apps.
OpenEclair - v1.0 - 01/28/2010
- Initial release based on Intension v1.4.0.
Click to expand...
Click to collapse
[reserved for space]
- Video/3D still not working - expect Video in 1.3
How so?
sounds good, after so much flash withdral, now all these roms
this, superd, and hero eclair!!!!!!!!! in two days
EDIT, wow I never noticed that I have the second post in this amazing topic
Damn it man... I was watching the Cleveland/Boston game and thought "I wonder if anyone released any updates?" I didn't exactly expect to see much, but now i'm going to miss a chunk of the game because I want to flash this and play with it.
Damn you guys and your badass ROM releases. Damn you! LOL
(thanks for this though, been waiting to see what you guys were putting together for the update)
Is it possible to have the Menu key to unlock changeable via Sapre Parts?
I really like the option where i have to swipe.
Also im also very curious on how 3D/Video is being accomplished
root explorer and sufbs force close in openeclair. any solution?
sagementor said:
root explorer and sufbs force close in openeclair. any solution?
Click to expand...
Click to collapse
Root explorer not working is a known issue, however SUFBS seems to work fine on my end. Also worked on all of the betas for me.
staticshadow said:
- Video/3D still not working - expect Video in 1.3
How so?
Click to expand...
Click to collapse
Wait and see Wes will work his magic, when he has a chance. Just give him some time. We also gotta work out BT in this build as well, so there are a few kinks to iron out still. Wicked fast though
The boot screen made me "lol"
I wasnt expecting that. Looks neat though
the background of the boot screen is scaled up from a low-res image, does not look as good. it repeats too much and a bit annoying to keep a big bright screen for so long.
So what happened between 1.2.1 and 1.2.2 to break bluetooth?
Hey guys, first time OpenEclair user, long time Cyanogen user.
So I'm trying to flash this ROM, but I'm getting this error
Code:
copying files...
E:Can't symlink /system/xbin/bb/dirname
E:Failure at line 73:
/system/xbin/busybox SYSTEM:xbin/bb/dirname
I googled for it, and found some folks talking about symlink issues, and people said it had to do with formatting the SDcard. So I repaired mine using Amon_Ra's recovery image, and tried again, but no dice.
Help?
toekneebullard said:
Hey guys, first time OpenEclair user, long time Cyanogen user.
So I'm trying to flash this ROM, but I'm getting this error
Code:
copying files...
E:Can't symlink /system/xbin/bb/dirname
E:Failure at line 73:
/system/xbin/busybox SYSTEM:xbin/bb/dirname
I googled for it, and found some folks talking about symlink issues, and people said it had to do with formatting the SDcard. So I repaired mine using Amon_Ra's recovery image, and tried again, but no dice.
Help?
Click to expand...
Click to collapse
I haven't had this issue and I am a long time Cyanogen User also. I always wipe everything... factory reset, dalvik, and ext using Amon_Ra's recovery image. I have been jumping back and forth flashing different roms and I have yet to have an issue.
OK, here's what I did, step by step:
-Extracted the OpenEclair 1.2.2 zip onto my SD card (I realize this was wrong)
-Wiped data and Dalvik via Amon_Ra's recovery image
-booted into cyanogen and opened terminal emulator
-flash_image boot /sdcard/boot.img
-reboot
My phone restarts, and hangs on the TMobile G1 Screen
-I reboot into recovery, and realize that you can install from zip files. I realize my first mistake of unzipping the file.
-I pull my sdcard and download the openeclair file again, and place the zip file on my sdcard. I carefully remove only the files I unzipped from the OE zip file, knowing that the "apps" folder had some files in there already, so I left those.
-reboot, recovery, install zip from recovery
That's when this error shows up. So I back up, pull the SDCard again, download the latest Cyanogen and try the flash it. It installs fine, but now when I reboot my phone hangs on the TMobile G1 screen.
****.
So I do a Nand restore, and the phone boots into really old android that came on the G1. yikes, but ok. So I try and install OpenEclair now, via recovery image, same error. I install cyanogen, and my phone again hangs at TMobile screen.
Help?
toekneebullard said:
Help?
Click to expand...
Click to collapse
All I can think of is that you may not have waited long enough when on the G1 screen. It can take a really long time to get to the splash screen.
The real reason I'm posting now is to say congrats to the devs. This ROM is a winner. I only ran it for a few hours because I rely heavily on bluetooth, but I still enjoyed it enough to recover my TI backups, rearrange my home screen shortcuts and even make a nandroid backup. I'm recovering my OE 1.0.1 nandroid backup as I type, but I cannot wait to see 1.2.next with working BT. So Chris and Wes an anyone else working behind the scenes: get enough sleep, take your time, I'll keep watching you on twitter to see when the BT fix is ready. I'll see if I can pull together a little beer money while I wait.
revwillie said:
All I can think of is that you may not have waited long enough when on the G1 screen. It can take a really long time to get to the splash screen.
Click to expand...
Click to collapse
Yeah, but 30 minutes?
toekneebullard said:
Yeah, but 30 minutes?
Click to expand...
Click to collapse
that's probably long enough. I guess you should just start fresh with full wipes and reflash. I used to hate it when people told me to do that, but I'm a Titanium Backup user now.
No boot problems
Hello toekneebullard. If you sdcard isn't properly formatted with linux-ext-swap, it can cause a no boot situation. It should go like this: Fat32 / Ext3 - 500mb/ Linux-Swap 128mb. This setup will work for most ROMs with or without swap. Regards
In case nobody saw the DroidEris over at G1 forums, i will post it here for Kingsklick.
Android 2.1 with Sense UI - and may i add, the fastest one out there (faster than ANY hero ROM's ive tried, and with a few exceptions i tried them all).
This might aswell have been a HTC official release, i'm not kidding - it really is so fast.
Remember: Skip HTCsetup wizard, login to google via market
______________________________________________________________________________________________________________________________
Ok guys just like I promised you, here is a build that is the next best thing next to desire, the new 2.1 Eris leak. This is a straight port for the G1. I pulled many things from RaiderX303X's build, so be sure to thank him Some things are broken but I assure you this ROM will advance. Provide feedback please, and search the thread before duplicating a bug post.
Now, let's enjoy!
Release Name: KiNgxKxKlair DroidEris2G1
Release Version: 0.1
MD5 Sum:
Credits: Cyanogen, CCyrowski, RaiderX303X, Haykuro, MoDaCo, Stericson, JAC, Eugene373, miketaylor00, Jubeh, Twisted, Fictionless, Shafty, any other dev I forgot to mention, and most importantly, my patient lady for putting up with ma devin'
Base Firmware: 2.1
Radio Required: Latest
SPL Required: Death SPL
Partition Layout: Fat 32--EXT 4--Linux-Swap
Wipe Required: Full Wipe
Special instructions: If you decide to use Swap I use a 256MB swap partition and it flies. Delete EXT partition, create ext2 and upgrade all the way up to ext4 then flash. IF YOU DO NOT GAPPS WILL NOT WORK
Download: Latest Version 1.1.2
Older versions: Version 0.1 Version 1.0 Version 1.1 Version 1.1.1
HTC Widgets installed: Stocks, Bookmarks, E-Mail, Footprints, Photoalbum, Photoframe, Settings, Calendar, Messages, Music, Persons, Search, Sync Now, Twitter, Clock, Weather
_______________________________________________________________________________________________________________________
Recommended settings for this ROM:
256 MB SWAP (use Swapper app http://handheld.softpedia.com/get/System-Utilities/Enhancements/Swapper-79210.shtml (Why 256 mb? - Why not be sure)
Follow this topic EXACTLY: http://forum.xda-developers.com/showthread.php?t=653889 (Disables unused apps in startup/after etc., I recommend Autostarts)
Finally, use this patch to remove A2SD (if you got a MyTouch/Magic): http://forum.xda-developers.com/showthread.php?t=655256
_______________________________________________________________________________________________________________________
Just like any other dev, I am not responsible to whatever happens to your phone *surprise*
ChEerS
"I live to DEV another DAY" -My quote
Follow me on Twitter if you like my work: www.twitter.com/kingklick92
Changelog
Version 1.1.2
- No wipe update
- Audio fix
- Call quality fix
Version 1.1.1
- No wipe update
- HTC_IME fc fixed
Version 1.1
- No wipe update (if coming from 1.0)
- Now using eclair king kernel #7
- Removed BFS
- Using CFS
- Optimized by yours truly
- Getting FAST
Version 1.0
- Dropping the Beta tag
- Stable build, ran this for pretty much a week now
- Reverted to King Kernel #5
- Removed BFS
- Slight "hitchies" on Rosie are a thing of the past
- Fixed GPS
- Fixed Camera
- Fixed KeyMappings for G1 users
- Still using 10Mb RAM Hack
- Added CompCache support
- Added Mount USB
- Added Wireless Tether
- Added Wired Tether
- Added new Spare Parts
- Not optimized...YET
- I must say, this build is getting pretty snappy
- More to come
Version 0.1
- First release, very beta
- Port of the 2.1 Droid Eris leak
- A2sd is automatic! Just have that second EXT partition
- Linux-Swap is enabled by default
- Using King Kernel #6
- Using BFS 315
- No RAM Hack
- MP4 Playback Support
- Youtube playback support
- User.conf is called on and functioning
- Running fix_permissions on firstboot to keep it clean
- GPS broken
- Camera Broken
- Using Raider's optimized apk's for now until I optimize them using my method
- Be sure to read OP for instructions, or I'll bet you your Gapps will not work!
- Many things I am forgetting I will add
after you fix the camera and GPS i will try it.. (i use this **** q:
dalet11 said:
after you fix the camera and GPS i will try it.. (i use this **** q:
Click to expand...
Click to collapse
If you look at the first post, i've uploaded the files for you
i will get my NEW MAGIC in 2 days.. you got more time
can you upload some pics?
I've got this on my 32B and it really is the fastest "hero" ROM by far. However, I do have a problem, wifi doesn't work. My phone can see networks when scanning but I simply can't get it to connect at all.
Anyone know a solution?
palexr said:
I've got this on my 32B and it really is the fastest "hero" ROM by far. However, I do have a problem, wifi doesn't work. My phone can see networks when scanning but I simply can't get it to connect at all.
Anyone know a solution?
Click to expand...
Click to collapse
same here just installed
kaiya215 said:
same here just installed
Click to expand...
Click to collapse
reset your router..this should work.
Oh wow I am really tempted to try this now...guys is it really that fast?! Is this really that good that he is claiming that it should be official?!?! Im definitely getting excited..i may have to try this tomorrow
running it right now...
will report back tomorrow after using it at work and throughout the day...
initial comments is that it was alot faster than his aosp 2.1 port to 32b...this thing was blazing quick in the beginning...its settling down right now and is slowing down but still pulling through
and my trackball lights up ALL THE TIME
i dont know what notifications im getting but haha i dont care lol
kaiya215 said:
same here just installed
Click to expand...
Click to collapse
Well it just started working with no other intervention than the passing of time....
About an 1/2 an hour after posting I noticed my phone was saying it was connected to a wifi network. It just started working. I didn't reset my router.
bigballa said:
running it right now...
will report back tomorrow after using it at work and throughout the day...
initial comments is that it was alot faster than his aosp 2.1 port to 32b...this thing was blazing quick in the beginning...its settling down right now and is slowing down but still pulling through
and my trackball lights up ALL THE TIME
i dont know what notifications im getting but haha i dont care lol
Click to expand...
Click to collapse
I recommend that you setup your Swap settings with this info:
Swappiness: 40
Swap size: 96 MB
use Swap partition
Is swap required?
Have this running for 5 days now best Rom I ever flashed.
WebghostDK said:
I recommend that you setup your Swap settings with this info:
Swappiness: 40
Swap size: 96 MB
use Swap partition
Click to expand...
Click to collapse
whats the best way to do this for this rom.... i tried using the user.conf method and it seemed to slow it down....
then tried the userinit.sh method and same diffrence
unless the user config files i have are just botched from old roms.....
also i tried a adb pull of the user.conf file and it said it didnt exist mounted/un-mounted didnt make a diff.
kaiya215 said:
whats the best way to do this for this rom.... i tried using the user.conf method and it seemed to slow it down....
then tried the userinit.sh method and same diffrence
unless the user config files i have are just botched from old roms.....
also i tried a adb pull of the user.conf file and it said it didnt exist mounted/un-mounted didnt make a diff.
Click to expand...
Click to collapse
i would also like to know. the only other method that i know of is going through terminal, but everytime you reboot the values are reset and you have to manually set swappiness through terminal again.
I seem to not be able to mount the phone as a disk drive using this rom.
mmmlinux said:
I seem to not be able to mount the phone as a disk drive using this rom.
Click to expand...
Click to collapse
Known issue. Go download usb mount from market.
kaiya215 said:
whats the best way to do this for this rom.... i tried using the user.conf method and it seemed to slow it down....
then tried the userinit.sh method and same diffrence
unless the user config files i have are just botched from old roms.....
also i tried a adb pull of the user.conf file and it said it didnt exist mounted/un-mounted didnt make a diff.
Click to expand...
Click to collapse
i used the recovery the newest amon
kaiya215 said:
whats the best way to do this for this rom.... i tried using the user.conf method and it seemed to slow it down....
then tried the userinit.sh method and same diffrence
unless the user config files i have are just botched from old roms.....
also i tried a adb pull of the user.conf file and it said it didnt exist mounted/un-mounted didnt make a diff.
Click to expand...
Click to collapse
I think ive read that there would be a issue with the user.conf.
http://handheld.softpedia.com/get/System-Utilities/Enhancements/Swapper-79210.shtml
I used this, and it looks like it works
[ROM] [v1.3] [FAST] KiNgxKxlicK Slide2G1 "NO LOADING SCREENS" {6/29/10 1:27pm PST}
My G1 was long ago fried, I have no G1/32b. Read my sig if you desire.
First, a foreword:
It is finally here. I have been working on this for sometime. I worked on it for weeks then a month or so only to find it did not boot. Had a syntax error in my init.rc. Well it finally here and it boots! So please enjoy post all bugs with a logcat and enjoy. I will put all the work into this you would expect from me.
ENJOY ALL!
Broken:
* Bluetooth (expected, its a sense ROM)
* Lights (Download HeroLED from the market)
* Browser Flash
Release Name: KiNgxKxlicK Slide2G1
Release Version: 1.3
MD5 Sum: 9b7ba794c5a531cf0aa38788be45ec36
Credits: Cyanogen, CCyrowski, ChiefzReloaded, Stericson, JAC, Eugene373, miketaylor00, Jubeh, Twisted, Fictionless, Shafty, any other dev I forgot to mention, and most importantly, my patient lady for putting up with ma devin'
Base Firmware: 2.1
Radio Required: Any
SPL Required: Death SPL
Partition Layout: Fat 32--EXT 1/2/3/4--Linux-Swap
Wipe Required: Full Wipe update
Special instructions: Linux-Swap partition 160Mb (Let me know if another size works better!)
Download:
Older Versions/Bases:
Patches/Fixes/AddOns:
Just like any other dev, I am not responsible to whatever happens to your phone *surprise*
ChEerS
"I live to DEV another DAY" -My quote
Follow me on Twitter if you like my work: www.twitter.com/kingklick92
Changelog
Version 1.3
- New Base (full wipe)
- Now using Kernel #10! (BIG performance increase)
- Packed in every kernel module you'd need
=- turbo support
=- multi-tasking patch
=- same scheduler as #9
- Using the updated Multi tasking (kernel)
- Added Phone Prioitizer app to speed up incoming calls USE IT *thanks miketaylor00*
- Cleaned up first boot, still takes awhile though
- Cleaned up ramdisk
- Updated framework for loc *thanks russ*
- More I'll add
Version 1.2
- No wipe update
- GPS fixed *thanks for pointing it out gladiator*
- User.conf updated
- Shutdown is fully working! You can power off your device now
- Cleaned up ramdisk
- Edited init.rc for more functionality
- More edits to build.prop
- Dalvik vmemory intake increased
Version 1.1.1
- No wipe update
- May only be a .1 update but IS NECESSARY (much smoother and necessary bug fixes included)
- Camera fixed
- Updated user.conf for optimal performance
- Minor cleanup
- HTC loading screens should be gone
- Removed Bluetooth (broken anyway)
- CPU frequencies updated (576Mhz max)
- Swapped some libs from a previous release
Version 1.1
- No wipe update
- Fifo is set
- Fifo=1
- Removed Meltus Audio Hack
- Radio tweaks
- Data tweaks
- Added Swype
- Updated framework for browser fix *thanks ennatefox*
- Updated libs
- Disable Browser flash, it is broken and will crash browser
- Wifi is fixed (wifi fix not needed)
- Updated build.prop
- Testers have said 160Mb Swap is working great
- More I will add
Version 1.0
- First Mytouch slide release
- Using optimzied apk's, but more to come as usual *thanks russ*
- Kept it old school, usual King ROM layout
- Rosie is the fastest I have seen it on any sense build
- Cleaning things up on first boot
- Give first boot plenty of time, it takes awhile
- Fixing Permissions on each boot
- Auto aligning everything
- Using my latest kernel #9 *fastest kernel of mine yet*
- Updated Ackprash Nexus boot animation
- Kernel has overclocking capabilities!
- Everything works that you would expect (wifi, gps, etc)
- Three usual partitions required (Fat32/EXT1-2-3-4/Linux-Swap)
- A2sd is automatic! Just have that second EXT partition
- Linux-swap is automatic! Just have that third Linux Swap partition 150Mb+ (Testers let me know what size is best please)
- Init tweaks all done by yours truly
- Using my Ramdisk
- Multi Touch enabled and is system wide
- User.conf called on and enabled
- Clean Shutdown and reboot working
- Mapped correctly for G1
- Mapped correctly for Sapphire 32b
- Some apps moved to /data for your ease (to remove them)
- Added AppPack from T-Mo
- Added Astro File Manager (Nope, I haven't changed!)
- Added Wireless tether
- Added Wired tether
- More I will remember!
Do faves and genius button function correctly?
YAY FINALLY!!!
downloading,flashing, will let ya knwo how it turns out!
how about a port for 32A sapphire?
Browser
Can anyone confirm browser working? Broken says only lights..
Wait for confirmation than flashingggggggggg =)
lol he hasnt even finished uploading yet, so cant confirm or deny anything
kingofyo1 said:
lol he hasnt even finished uploading yet, so cant confirm or deny anything
Click to expand...
Click to collapse
my testers havent said anything about browser being broken....
well from flashing all of kings other roms..this one should be a real treat! So glad Cyanogen part 2 (kingklick) is back!!!!!
lights?
does that mean the LED's? or like backlight or backlight for keyboard, all of the above?
oh and btw hate to get killed on this, but im guessing BlueTooth isnt working still?
I love your work king i just want to know if i can rely on the rom for business.
King, you are THE man! i can't wait to try this out... Already nandroid'd
Bzerk1 said:
lights?
does that mean the LED's? or like backlight or backlight for keyboard, all of the above?
Click to expand...
Click to collapse
Most likely all of the above, just like the legend, Sense UI ROMs out. Theres an app on the market............cant think of the name but should do the trick.
Is this...fast?
MotoMudder77 said:
Most likely all of the above, just like the legend, Sense UI ROMs out. Theres an app on the market............cant think of the name but should do the trick.
Click to expand...
Click to collapse
Heroled, i believe it is...
How's the battery...
edited.
haha kingof just read that dl was still uploading lol and no bt does not work still because its still a Sense build.
is king cool with you posting that?
smjfosho said:
is king cool with you posting that?
Click to expand...
Click to collapse
lol idk. unquote me please. it was in his 4shared folder tho... its public.
Prediction...
If i may make a prediction here... I believe this thread will be a very active hot thread very fast and reach over 10 pages in a half hour its 5:12 Eastern Time for me so lets just be safe and extend it a little longer 6pm this thread will hit like 30 pages lol
"It's Good To Be The King"
Kings Back!!!
Hi!
I don't quite know how to start ;o) so...
This ROM is compiled from CyanogenMod 6, AOSP, Ezterry's and mine source code repositories . This ROM is not repackaged, moded, ripped, stripped, whatever version of any other ROM available on the Net.
Overview:
- 2.6.36.4 kernel from @Ezterry
- Native Apps2SdExt (also called Magpie) with Effdee fix (this also contains fix to pm/pm.jar used by f.ex. Titanium Backup when restoring app)
- xVold - mounts SdExt partition (if it exists) with data 2 SdExt
- Poor man SetCPU (as known from f.ex. Froyo by Laszlo) with safety valve logic by @hrk (CPU OC settings are not restored when phone crashes; you can safely try to push your CPU to the limit)
- CA Certs without compromised Diginotar keys
- CACertManager from Guardian Project
- long click on PowerWidget icon launches Settings (backport of CM7 feature)
- black bar theme (most of gfx were taken from @Sisterchick's themes but if you see your gfx used please let me know so I can give proper credits)
- uses AnyKernel so should boot on 2708/EBI0/EBI1 devices (tested only on 2708)
- stock Froyo Launcher (aka Launcher2)
- can use Swap or Compcache (both disabled by default and I don't really see the point of using any of them)
- no Gapps
2011.10.06 updates:
- Firerat's cache management ;o) script in /etc/init.d (https://gist.github.com/1182265)
- updated APN list
- Superuser 3.0 (upgradable via Market; please consider buying Elite version to show @ChainsDD some support)
Backports from CM7:
- RotaryRevamped, Lense and Ring lockscreen styles (Phone ui follows lockscreen style)
- Battery percentage on Lockscreen
- Restrict system packages to protected storage (this is security fix)
2011.10.13 updates:
- fixed bug in Phone app that caused crash when dpi setting were anything but 160
- fixed bug in Phone app that caused on screen Accept/Decline buttons not always show up
- Compcache/Swap is working again (note that activating/deactivating need reboot)
- Camera app with DCIM patch courtesy of @hrk
Known bugs/misfeatures:
The ROM runs perfectly OK without Ext partition. Only drawback is requester that pops up informing about unmountable SD card. What it's not telling is that only Ext partition is unmountable
No DCIM patch in Camera app this time (patch is against GB sources and I had no time to fix this; It's not hard just need time =o( This patch will make it into next release, sorry.
Apps2SdExt in this ROM is implemented at framework (system) level. Please do not use any scripts/apps that deal with applications installed on SdExt. Each and every application can be moved to and from SdExt using "Manage applications" under Settings. At some point in time I might add way to mass-move applications between SdExt, Internal and SdFat storages.
NameLessFroyo-multi-20110922.zip (md5: a21ce6a2c340fd71d17ce27dca60f58a ; sha1: 4e256d4dd27bd561619358d71f2520c9aca7fd8a)
NameLessFroyo-multi-20111006.zip (md5: f3fc0a3f92a2796ecea9f8cf2b79f870 ; sha1: df9f21a7cce17ea7734b9e5b81a73e8cbccc8f57)
NameLessFroyo-multi-20111013.zip (md5: 01a3def65577e563be17f86925e0d3d6 ; sha1: 3a53a8dd5e5f76430c261596640aada8c7e7f8b7)
First install instruction:
1. Boot into Recovery
2. Make a backup.
3. Wipe all and everything (including SdExt)
4. Flash zip
5. Flash GApps
6. Reboot
Installing updates:
1. Boot into Recovery
2. Make a backup
3. Flash zip
4. Reboot
(I do my best so that all updates are of no-wipe type)
On first boot give the Dream some 10 - 20 minutes to settle.
Enjoy the ROM =o)
Credits:
CyanogenMod Team - this ROM wouldn't exist without them and I'd be stuck on Dounts =o)
Firerat - without him I'd never dig that deep in the Android code
Ezterry - always helpful and all that excelent work on kernels and GB for D/S
Sisterchick - your themes are great (hope you don't mind taking some gfx from them)
hrk - always helpful and skilled coder
And special thanks to all those who made Android the way it is now =o)
Sounds good! Will try it someday if i have spare time
I'll try it, will download when I have a chance.
Nice!
Very nice job...thank you!
been running barebone of this rom. running nice for the last 2 hours.
good job. thank you
NLJ said:
- Poor man SetCPU (as known from f.ex. Froyo by Laszlo) with safety valve logic by @hrkdroid (CPU OC settings are not restored when phone crashes; you can safely try to push your CPU to the limit)
Click to expand...
Click to collapse
Well, that's still me ;-) Github already had an account for "hrk" registered a couple of days before I registered one ... a stupid unused profile...
Nice to see a Magpie'd FroYo ROM!
Will you add my own DCIM compliant camera patch?
Very nice job, thank you for the magpied froyo rom. I will try it in the next days.
Sent from my Gingerbread on Dream using XDA App
Downloading now.... The G1 still has DEVs...LOL
can someone give me the download link of gapps
i wanna try this
Here u go http://forum.xda-developers.com/showthread.php?t=796696
hrk said:
Well, that's still me ;-) Github already had an account for "hrk" registered a couple of days before I registered one ... a stupid unused profile...
Click to expand...
Click to collapse
Fixed in the OP. Sorry for the mismatch (hrkdroid kinda get stuck in my head ;o)
hrk said:
Nice to see a Magpie'd FroYo ROM!
Click to expand...
Click to collapse
TBH Froyo by Laszlo was the first one (and yeah I've put my fingers there too ;o)
hrk said:
Will you add my own DCIM compliant camera patch?
Click to expand...
Click to collapse
Crap! I knew I forgot something! I have it open in on of tabs in Firefox. I'll add this after I put all my source changes to repos more online than my laptop (I just created ToDo too =o))
AndDiSa said:
Very nice job, thank you for the magpied froyo rom. I will try it in the next days.
Click to expand...
Click to collapse
If you had data 2 sdext and were using Magpied ROM, you might try to skip wiping SdExt. Not sure if this will work when coming from GB to FroYou but.... =o)
dani132 said:
can someone give me the download link of gapps
i wanna try this
Click to expand...
Click to collapse
Please closely inspect point 5 of install instruction... like hoover mouse over the "GApps" part or something ;o)
dani132 said:
can someone give me the download link of gapps
i wanna try this
Click to expand...
Click to collapse
I used CyanogenMod 6 MDPI 20110501 from http://wiki.cyanogenmod.com/index.php?title=Latest_Version#Google_Apps
I think that is the newest gapps pack for 2.2 Dream. Market is updating to 3.1.5 after first market open.
EDIT:
Anyone has a problem with random restarts?
I'm looking for a Stable ROM for my Brother, he's taking control of my OG G1 I like the settings back port. Nice touch, I'll check it out when my phone isn't needed.
thanks for this new modded cyanogen rom.flashed,booted and running normal.
love the honesty of it too, Nameless Froyo, laughed a lilwhen I saw the boot screen xD
OKKIE! D/L and flashed last night. Looking good at first glance. I love it.
Niceee! on the move apps to SDExt/SDCard options. Now I get to move everything to SDExt.
59MB Internal spaces free? WOW! I am loving this , still got that and more even after about 5 - 6 apps installed. Usually I ran out of room by now and had to decide which apps I want to keep.
GGRRRR! Just got my first reboot (just now). I hate when that happens. Got to figure out why it does that.....
Wifi, Bluetooth works well.
Network connection even works in the building at my office. (cool) I get a constant signal finally (well not it about 85% stable)
Overall the system seem to run pretty fast, we'll see how it deal with my usage...
Battery life with wifi on, and used not so good. But I guess that's how it is. I am used to constantly keeping it charged up anyway, so no worry there for me.
just started getting reboots. 3 in last 15 minutes.must find problem.
ok' ran this thing all day at work with no more reboots. don't know why they just stopped.lol
puppetcarl said:
just started getting reboots. 3 in last 15 minutes.must find problem.
Click to expand...
Click to collapse
You find out let me know... Only one for me so far. For me I think it was when I have apps open and minimized in the background. (no sure though) I have not had any reboot since then. Hopefully it stay that way for me...
I've nbeen bootlooping for approx 30 minutes now...
Eutherin said:
I've nbeen bootlooping for approx 30 minutes now...
Click to expand...
Click to collapse
WOW! Did you ever got to the lock screen at all?
What SPL/radio do you have?
---------- Post added at 11:42 AM ---------- Previous post was at 11:38 AM ----------
WOOHOOO! With thinning out the apps that I don't need, my internal spaces went up to 66MB, with 9 apps extra apps already installed.
Still running as fast as the first boot up. So far so good.
All those that have probs with random reboots pleas try flashing kernel from this post: http://forum.xda-developers.com/showpost.php?p=14768272&postcount=2427
Theoretically they are the same (same sources were used) but Ezterry uses GB toolchain to compile and that might be the diff.
@Eutherin well you could as well hook G1 to some usb cable and grab logcat for me, right?
If you want to report a bug/bootloop/etc at least try to grab a logcat. This will help solve probs.