hello,
does anybody know difference between these lcd types for vox :
60HH00087-00MM
60HH00088-00MM
are they compatible ?
i have vox with broken 60HH00087-00MM, after replace lcd with 60HH00088-00MM phone starts but lcd is black (old lcd works, but it's broken)
Where did you get the replacement from? Was it announced to fit the Vox?
tobbbie said:
Where did you get the replacement from? Was it announced to fit the Vox?
Click to expand...
Click to collapse
i buy it as a brand new spare part for vox, seller said that never found diffrent types of lcd's
Can you derive if just the backlight is not ok and the screen works (you need some very bright light to see this) or will it stay without any signs of life?
Anyway it is simply defective - return it to the seller.
both types works fine, problem was with my assembling process and lcd connector
Yes, you need to know how to unlock/lock the connector for the LCD flexcable, otherwise it will not connect.
Are you happy with the brightness of the LCD? I had one replacement LCD which was only half as bright as the original one (like the dimmed state there) - no more readable in direct sunlight.
If it is as bright: where did you buy it?
Related
Hello Friends,
yesterday when i saw the screen of my xda exec i saw a big black spot on the centre of the screen, not sure how it happened. i can still make calls from the phone.
but now i want to figure out whether i'll need to replace touchscreen or the LCD or both but i dont know how to figure out which one is broken.
Any help will be really appreciated on this.
Ashwani
Chances are
if the touch capability is intact, it's your LCD. The opposite, where the screen looks fine, but the touch is gone, would be your digitizer. However, unless you know how to replace a digitizer, I recommend getting both, LCD and a digitizer in one unit, rather than attempt to assemble the screen yourself. Which, judging by your question, is likely to be the case.
enigma1nz said:
.
Click to expand...
Click to collapse
I would only iterate what enigma1nz had to say . It's at least your LCD at fault, but buy both as one unit. Or, buy a Uni that guarantees a working LCD+Touch pad (ie, a Uni with only a broken broken mobo/usb/doesn't boot etc) from eBay or the like.
First of all, I would just take the screen part of the Uni apart and check all is tight when replacing, as if the LCD has no obvious cracks, it's very likely a rubber-strip contact or similar.
NB. If anyone is interested in purchasing a fully-working Uni (brand new casing), with a non-functional touch/digitizer (guaranteed working everything else incl. LCD), I'm about to put on eBay. (PM me)
Hi i have got HTC diamond and i must've sat on it or something, but i have a few large cracks on the internal screen. Touch works fine i mean, everything is in working order, its jsut i have a massive cracks from one side to the other. I'm having trouble finding the right screen because there is the lcd panel with the htc logo and then theres another with just the screen. I want to replace it myself because can't be bothered going through the whole sending the phone off phase. If someone can redirect me to a plae i could get a screen for a reasonable price, that would be great.
Let it go... I'm actually having the same problem and there is one thing you need to know : you need to sold a connector from the LCD screen to the Touchscreen, it's not a connector that you can plug easily.. (((
I just bought a LCD screen and a touchscreen on eBay, but without this sold, it won't work as I would..
I have solder and the kit and if i can find a tutorial somehwere i'm sure it can't be that hard. You said you found it on ebay, do you have a name or maybe a link? how much did you pay? =-s
I cracked my screen (while it was in the pocket of my jeans). Anyone know where I can find replacement screen? Is it easy to change it?
Thanks
I can't paste a link here so copy the number and paste it in ebay.com:
280472528404 (description: new original Acer s200 S 200 LCD Screen)
I don't know if it's easy to change..
Philippe_Raimo said:
I can't paste a link here so copy the number and paste it in ebay.com:
280472528404 (description: new original Acer s200 S 200 LCD Screen)
I don't know if it's easy to change..
Click to expand...
Click to collapse
Thank you very much, I will look into this one.
screen seems to work fine, installation was not too hard. However, new screen acts little weird, as once phone is off, backlight turns off immediately, but you still can see image for few seconds under normal light, pixels show through, and then it fades away.
Look for an original AUO H380VL01 or HTC Touch HD Sharp matrix... It's reported to be compatible with our phone
cracked screen too
baddentist said:
screen seems to work fine, installation was not too hard. However, new screen acts little weird, as once phone is off, backlight turns off immediately, but you still can see image for few seconds under normal light, pixels show through, and then it fades away.
Click to expand...
Click to collapse
i have the same thing with my acer screen (cracked in my jeans)
i buy one on ebay (i m waiting the screen)
can you tell me how to do to change the screen ? it's easy?
(sorry for my bad english)
ok it s done
i recieve my lcd screen with tools and i change it
it's easy
the screen is ok thanks for xda and all of you for existing
(sorry for my bad english)
I installed mine today -after 6 months with broken screen- I bought lcd for HTC Touch HD T8282.It is far more cheaper than the acer one and fits perfectly.ebay item 290424248491.
The HD screen is the same of NeoTouch?
I've paid 70€ for a screen for newTouch, but your proposition is more good: 50€!!
Are you sure it's good for Acer? My touchscreen is OK...
Im using it since last friday. its perfect
I received my screen today, but it's difficult to open this mobile phone!
I remove 5 screw on sur back of the phone, but i don't know what remove
There are two more screws at the left and right sides of battery house
littlbox said:
Im using it since last friday. its perfect
Click to expand...
Click to collapse
i have the same prob.... i dropped my phone and my screen blanked ....and i need another lcd .... i was thinking about what you did.... but if i'll get the HTC one the front of the mobile will be with HTC logo instead of the ACER one ...
right?
screen now fixed
I took my phone in to a local shop and they were able to change out the screen using an HTC HD screen (yes, the exact same screen as the neotouch). All is fine with the screen. They messed up the power button, but that is another story. I watched the guy do this and it seemed like a hell of a lot of intricate work to do yourself. I was happy to pay the $120. Now, I just need to return and get them to redo the power button (installed it incorrectly when putting it all back together).
For those adventurous enough- go for it, but I suggest the cheaper HD screen. And no, only the screen was replaced, which is under the touch screen/digitizer that actually has the acer logo. All looks as it did before.
I took my neotouch for a motocycleride in the rain. It didn't like it too much and now the touchfunction is messed up on parts of the screen. It all displays as it should but I can't use parts of the screen. I should be allright with just replacing the digitizer right? Ebay item Item number: 170518652337
Hi, the same for me.
Touch doesn't work on some area.
Need change digitizer or LCD?
Antenna gps
Hi someone tell me where it's possible to buy a part "gps antenna "?
LCD Screens from HTC Touch HD and HTC Blackstone are working correct. Use these replacements instead of original
darks1de said:
LCD Screens from HTC Touch HD and HTC Blackstone are working correct. Use these replacements instead of original
Click to expand...
Click to collapse
Hi,
this didn't work in my case. After replacing my broken original lcd screen with a new lcd display (eBay - No. 120608475783, Original HTC Touch HD LCD Display T8282), I can see that the display is switched on, but it doesn't seem to receive any signal (like you turn on your pc monitor but not the pc). Now I have two questions:
1.) If only the lcd display is broken - should I still see something on the display? Because on my broken display, I only have a black and a white part and some coloured stripes, mostly where the display is broken.
2.) Is it possible that there is something more broken on my NeoTouch or did I simply receive a broken lcd panel? It did fall off the couch, completely flat on the display.
fyi: the new lcd was missing some isolation (on the flexible part with some electrical components) which was present on my original lcd. I used some sticky tape as a replacement because it is directly positioned over some other electrical components on the phone when in place.
New Info:
Everything except from the display seems to be fine - when it is connected to my PC running "My Mobiler". But I have seen pictures of mobiles with a cracked screen whre you were still able to see (partly) the homescreen, etc. On mine, I am not able to see anything while the cracked screen is mounted - only white and black parts and some colored stripes...
Update: The delivered display was broken. Yesterday I received a new one which works perfectly!
many thanks in advance
TrashX
aih, the same story with my f1
anyway could you suggested seller lcd f1 on ebay???
i'm afraid if wrong order with lcd resolution under wvga,,,
some seller show resolution from their prodocut and a lot of seller don't do that,,
please help me..
Bought a second hand HTC Diamond that works real well. Just ordered an extended battery and a new back to cover the thickness of the new battery but the screen needs to go and be replaced.
Has a couple scratches (Isn't too bad) but there's one right near the forward facing camera that pisses me off because I always see it when I'm looking at the screen.
How hard would it be to replace the screen (By myself) and where would be the cheapest place to buy a new screen for it? I want a quality OEM (If possible) screen for it, not a cheap Chinese knock-off.
Check Ebay. There is a lot of lcd's and digitizers for Diamond.
Here is how to video: http://www.youtube.com/watch?v=9LrlBpgskwU
HTC's most hard devices to change digitizer are touch pro, diamond, hd and hd2.
they are sticked with lcd.
sokomind said:
HTC's most hard devices to change digitizer are touch pro, diamond, hd and hd2.
they are sticked with lcd.
Click to expand...
Click to collapse
Ooh ..... So you offer repair services !!!! If it is so nice
ok here is a link to new screen http://www.amazon.com/NEW-Touch-Screen-Diamond-P3700/dp/B0026UECGA/ref=sr_1_2?ie=UTF8&qid=1293737165&sr=8-2
http://www.htcrepairparts.com/touch-screen-digitizer-for-htc-diamond-p3700-p-948.html touch screen
My new screen of lg really works well.
Normally , a full display will cost you at about 40-50E. At least this are the prices here.
I too have a stupid display , it has some little white dots under it that light up when the lcd lights up. Not a big problem , but does annoy me
Hi
I was absent from this forum for a while (10 days that's was sooo long) but now i do my come back for a reason my g3's screen is dead.
Does anyone know how replace it and where can i find the cheapest one ... I already open my phone but i want to be sure of the method and i'm not a nood in this, my psp has been unmounted (completly ^^) and actually works very well.
Thx in advance
Antaine
If wrong section don't hesitate to move
---
I am here: http://maps.google.com/maps?ll=48.861566,2.274179
I don't think you should replace the screen by yourself. Also FYI it's not like a normal touchscreen. According to the manual, the screen is an electronic screen which changes finger touch to electric signals, hence "tochscreen". So probably you would have to play with the hardware also. I have replaced my screen for Rs.3000 (some $50) from samsung service. It feels better (even better than the stock screen).
it's only the screen parts because the phone is working and the touchscreen is working too i can use my phone i received my Gmail mail sms etc and i 've the haptic feed back when i unlock it but i don't have any image and when i unmount it everything apart the screen seems to work ...
edit: i want to change the LCD display which is dead not the external part of the screen....
Tutorial for changing the LCD panel
although note that buying a new panel would cost you quite a lot of money, you are better off buying a new phone i think
I don't want to change the panel i want to change the display and anyway i just successfuly completly unmouted the phone, i'm just looking for a webshop where i can find a cheap LCD display (normally it's ~ 30€
i don't follow you...you said you didn't want to change the external part of the screen
the screen on all touch devices consists of two parts:
the digitizer (thats the external cheap bit) that transcodes touches to digital signals
and the lcd panel (that's the internal expensive bit) that projects images
what is your problem exactly
also i suggest you take a look at ebay for parts
I want to change the lcd part
My phone seams to work because when i call it ring and i can answer it by sliding the screen where there were sliders when i send a sms it ring when i receive a gmail it ring but i din't see anything the screen is totally black ....
I hope you'll understand
Excuse i i'm not clear
tomsi191 said:
Tutorial for changing the LCD panel
although note that buying a new panel would cost you quite a lot of money, you are better off buying a new phone i think
Click to expand...
Click to collapse
^^that's your answer then
A lcd pannel is not so expansive (25~30€) i just to know a secured and confident place to buy it ....