Okay, heres the problem im having, after the install of Manila 2.1 for my Fuze my phone's completely messed up. When I click anything on my screen it clicks something about 2 spaces down. For example on my WM 6.5 Unlock Screen, if I click a 3 it clicks the 9. I don't know what to do. I can't use my phone and its the same problem for everything: Games, Apps, Home Screen, etc.
Broman400 said:
Okay, heres the problem im having, after the install of Manila 2.1 for my Fuze my phone's completely messed up. When I click anything on my screen it clicks something about 2 spaces down. For example on my WM 6.5 Unlock Screen, if I click a 3 it clicks the 9. I don't know what to do. I can't use my phone and its the same problem for everything: Games, Apps, Home Screen, etc.
Click to expand...
Click to collapse
So uninstall it. Did you flash manila for a different device?
No, I didn't flash the Manilla, it was a cab file.
http://forum.xda-developers.com/showthread.php?t=542113
Have you tried re-aligning your screen?
Go to Settings/System/Screen and click align screen and follow the directions.
dwizzy130
I tried re-aligning but I do it, it moves to the next target thing, I finish and it re-starts the process.
EDIT: When I tap the target nothing happens, if I make a circle around it it goes to the next target but still restarts the process.
Broman400 said:
I tried re-aligning but I do it, it moves to the next target thing, I finish and it re-starts the process.
Click to expand...
Click to collapse
Hmm.... I say backup and hard reset. I know no one likes to hear that but I think it's the only (and best way) to fix a problem like this.
dwizzy130
How do I backup my games and program? i got like 100+ games and apps. And save files for the games, and how could I remove Manilla 2.1, I tried and it said it wasn't successful.
i recommend sprite backup if u have it, and if u got a micro card with some extra space backup on there as well or transfer to ur computer via activesync and as far as uninstalling manila, have u disabled it from today screen and tried uninstalling again? might be the case....
Now I can't even unlock my phone, i click everywhere on my screen but the WM 6.5 Unlock Slide Bar doesn't click or slide.
I had the exact same problem a couple of weeks ago, screen was not aligned and the calibrate screen program just went round and round. The problem seemed to start when the phone ran flat, it wouldn't charge properly either (it intermittently showed the charging icon and took forever to get any kind of charge). In the end I turned the phone off and charged it over night and the next day the screen was fixed and the battery fully charged. I have not had a problem since.
How do I turn the phone off, I tried last night but I cant get passed the unlock screen and holding the power button doesn't work?
Broman400 said:
How do I turn the phone off, I tried last night but I cant get passed the unlock screen and holding the power button doesn't work?
Click to expand...
Click to collapse
If I were you, I would hard reset then flash back to stock ROM, then see if your issue is resolved (which I am 99% certain it will be).
If you can get it to sync, your all set, if not you'll have to flash via SD card.
Also, obviously removing the battery will turn it off.
Id hard-reset but I got too much apps and games, and what'll happen to my saved game files?
Broman400 said:
Id hard-reset but I got too much apps and games, and what'll happen to my saved game files?
Click to expand...
Click to collapse
They'll be all gone. That's why backing up regularly is a really good practice.
dwizzy130
Broman400 said:
Id hard-reset but I got too much apps and games, and what'll happen to my saved game files?
Click to expand...
Click to collapse
Either that or you figure out how to uninstall the manila that hosed you up.
Do you install your aps to your SD card or device, if SD card, you're fine, if device, you will lose your data.
You could either have a brick full of games or a phone that is able to have games work again.
Use SKTools for uninstall. If that doesn't work, hard reset.
I got the games and apps and everything on my SD Card, but if I hard-reset itll remove them from my Games and Apps folders and they won't be in my Add/Remove Programs List. Any program back that up? I got SPB Backup but never used it.
SKTools is the only effective way I've found to uninstall Manila.
But, I can't even unlock my phone anymore, I click the Unlock Thing and it doesn't click and my computer doesn't find my phone.
Sync your phone and explore it with your computer... Grab whatever saved data you need... Then hard reset or flash another rom...
Related
Hey everyone,
I seem to be having a weird problem.
My Wizard is freezing on the 3rd splash screen. It's been working fine for the last like....2 months. I didn't install anything yesterday (when it was working fine)
Any Idea's on how I can backup my data? or do I have to do a full reflash =\
?
There isn't any way of backing up data if the phone cannot enter the normal mode of operation. If you have programs such as.. hmm.. forgot the names, that allows you to boot into safe mode, you have a slim chance of getting it into normal operation mode. To check if you have such software, just soft reset the phone when you are at the frozen screen AND around which the phone should have been started.
If not, the only way is to hardreset your phone. And overclocking to 260 is no good in a long run.
hanmin said:
There isn't any way of backing up data if the phone cannot enter the normal mode of operation. If you have programs such as.. hmm.. forgot the names, that allows you to boot into safe mode, you have a slim chance of getting it into normal operation mode. To check if you have such software, just soft reset the phone when you are at the frozen screen AND around which the phone should have been started.
If not, the only way is to hardreset your phone. And overclocking to 260 is no good in a long run.
Click to expand...
Click to collapse
Exactly where around is when the phone should be started? At the point in time where the phone should be booting back to the today screen?
Yeah, at the 3rd splash screen...it should load the today screen, but it doesn't.
It just kinda sits there, eventually the screen would stop responding.
I read the "SD backup thread" i did it, unknowing I'd lose all my contacts! Lucky I made a PIMbackup about a month ago...
Still, I wish tehre was a way I could still get back my data.
Same thing happened to me, but then I solved it.
The battery & WM6 weren't being cooperative. Somehow, NBD's WM6 didn't get the proper battery status. My 8125 kept freezing up on the third screen or keep re-booting after the third screen started, particularly after trying a wi-fi spot.
I took the battery out, which of course stopped the freeze and/or recycling. Then I reinserted the batt, plugged in the unit & then turned it back on... no prob!
Weird huh?
I've used a bunch of roms so far and two of them so far have worked fine for days but for some weird reason when I would turn it on then it wouldn't turn on anymore. I am not gonna mention names because I don't think it's their fault I think it's mine. Both of them tended to do this right after I installed new software and then later on I would restart the phone. Is there some type of limitation of how much I could third-party software I could install in a rom?
Elmi said:
I've used a bunch of roms so far and two of them so far have worked fine for days but for some weird reason when I would turn it on then it wouldn't turn on anymore. I am not gonna mention names because I don't think it's their fault I think it's mine. Both of them tended to do this right after I installed new software and then later on I would restart the phone. Is there some type of limitation of how much I could third-party software I could install in a rom?
Click to expand...
Click to collapse
Ok my guess is you are using a touch rom. Here is what I am willing to bet has happened to you. You flashed the rom successfully, installed 3rd party software while the home plugin was still active on the home screen and now you are having problems rebooting.
I have 3 solutions for you.
1. Hard reset(hold comm manager and voice button while pressing reset button.)
2. take out memory card and sim card turn it on and then soft reset once it freezes.
3. DISABLE home plugin while installing new software.
Hope this helps.
dharvey4651 said:
Ok my guess is you are using a touch rom. Here is what I am willing to bet has happened to you. You flashed the rom successfully, installed 3rd party software while the home plugin was still active on the home screen and now you are having problems rebooting.
I have 3 solutions for you.
1. Hard reset(hold comm manager and voice button while pressing reset button.)
2. take out memory card and sim card turn it on and then soft reset once it freezes.
3. DISABLE home plugin while installing new software.
Hope this helps.
Click to expand...
Click to collapse
How do I go about disabling the home plugin temporarily?
Elmi said:
How do I go about disabling the home plugin temporarily?
Click to expand...
Click to collapse
Settings->today->Items->uncheck HTC home
Brother had a bad battery today. Caused it to loop splash screens. Switched battery with mine and fixed the problem. weired
these dvices act weired with bad battires
elhamy said:
these dvices act weired with bad battires
Click to expand...
Click to collapse
Yea that's no joke. Just today my Wizard running TNT.1437 Touch started trying to connect to GPRS over and over again and wouldn't stop untill the battery completely died. It was only at 3% to begin with but it died really quick(batterystatus probably helped)
When I turn on my device (TP) it ALWAYS asks me to align the screen and to config the calender and time, and also it asks me if I want to put a lock on it. (However the startup video does NOT show)
This is really annoying! Because I hade soft resetting or turning of the device, because I know I need to do that align and configs again!
I've hard reseted my device once, and before I hard resetted my phone, it wasn't like this! Is there a way to turn this of?
Just out of intrest, do you loose any data when you startup. Examples are other Windows settings, contacts, messages, history etc?
sorry, double post
Just to be clear, are you properly aligning the screen? I had to talk a geeky mate of mine through the process. He was briefly tapping the screen and the cursor wasn't moving around the screen as it should. I had to explain that you have to keep the stylus pressed gently on the screen over the little cross until it moves to the next position. Repeat at each position.
Sorry if I'm teaching you to suck eggs.
Uhmm, No I don't loose any data (settings or anything)
Also, yes I align the screen correctly I guess. I do it just as you tell me
But it's like, when you first got the phone, You first installed the WM (I don't) Then you align the screen (This I have to do) Then it asks you to tell it what time it is (This I also got to do every time i turn off and on my device) Then it asks if you want to have a code lock, you can skip or press next to make a lock (This I also have to do, And YES, I have tried to make a password and then just delete it afterwards) Then it tells you to type in PIN code (I also got to do this, but this is nothing I want removed hehe) Then lastly it auto configurated what network you use (For you guys ATT and sprint maybe, I got NetCom - Also this I do NOT have to do)
Please help me! hehe
Really annoying that I need to config this setting each time I restart my Cellphone
Has i always been this way? Have you not had the phone long?
It sounds like you didn't hard reset your phone after you either turned it on for the first time, or flashed a custom ROM.
I bet a hard reset will work, if not then it sounds like a hardware problem. Like back in the old days before WM5 if your battery died, thats it it would wipe. This is because the memory in the phone is volitile. Your phone might not be keeping the settings or supplying enough power.
Try a hard reset first, this usually solves most problems like this
marcd said:
Has i always been this way? Have you not had the phone long?
It sounds like you didn't hard reset your phone after you either turned it on for the first time, or flashed a custom ROM.
I bet a hard reset will work, if not then it sounds like a hardware problem. Like back in the old days before WM5 if your battery died, thats it it would wipe. This is because the memory in the phone is volitile. Your phone might not be keeping the settings or supplying enough power.
Try a hard reset first, this usually solves most problems like this
Click to expand...
Click to collapse
As said, I got this phone for christmas, I turned it on, and had to set it up, I did, and when I restarted the phone I did NOT have to set it ut again!
After 1 month I hard reseted it (Because of a bad program which ruined my dailpad) and now I have to set up the phone EACH TIME I turn it on!! (I do not have to install WM or config the Network)
OK, so I've Hard Reset my device again, works perfectly now!
my screen last night went blank except for the top and the bottom, I am on a stock rom with a bunch of programs installed. the programs have been on it for a while so it worked fine before.
I was roaming last night and tried to go online and it seemed to freeze, and when i mean freeze i mean freeze. it totally shut down and i could not get it to turn back on without a soft reset. when i soft reset it the screen was toatlly blank and it seems that touch flo aint working, I have to hit the start button at the top and a drop down list of programs (like with my old mogul) would drop down. I dont remember what version of windows that is.
trying to remove programs doesnt workeither.
Hope you got your files and contacts backed up...sounds like hard reset will be the only option for you...
is touch flo checked under settings-today-items
yeah it was checked, and i did a hard reset, I keep everything backed up all the time so im cool. just hate hard resetting.
might think about flashing a coustom rom, i just have to find a real good one, any ideas?
Dear Touche pro experts,
I have a huge feeling that a bricked my touch pro. So i make a post here ( not in romdev. because i wasnt updating a rom). This is what happend:
1 I was trying to install tomtom. That went wrong (could not activate the map, so i removed tomtom normal. Due remove programs. That went fine.
2 Then i wanted to delete the tomtom.cab file. It was on my SD card in a folder called \apps\tomtom. But instead of deleting the cabfile i deleted the whole apps folder
Still no problem...
3 I also had the blackberry app in that folder. But that was gone also. So i decided to remove the blackberry app also on the normal way. Due remove programs. I did that and still no problem. But after removing the app, i got a message (something like), please reboot youre device.
I tought, well that might be a good thing, indeed because i removed so much. So i pushed the on/off button and i reset the fuzz.... Then this happens...
The fuzz buzzes and shows the M rom screen, it also shows (in red) te version.
Then the HTC, just brilliant screen shows. Just like it should be. Even with the right background, sound and so.
But thats it.... Normally the screen comes up to enter youre security code. But that doesnt comes up any more... The screen stay black. I can see that the screen is lit up a bit, > the sides are lit. But that is it.
I removed battery, cards etc etc. But it stays the same,
I can also here the connection sound of my laptop. So the laptop does reconise it.... But to bad, that is it also... I get no map or something. Also active sync does not show...
So now i am really stucked... What can be wrong or who nows what to do now...
I fixed it... I was lucky that i still could preform a hard reset en reinstall the fuzz.....