Cotulla rom wm6.1 " wwe 3.04 " is great.. But the is no " botton lock " icon in the settings , so the only key to turn on the screen is the on/off botton.. Which will destroy it easly by long time use..
tarekezzat said:
Cotulla rom wm6.1 " wwe 3.04 " is great.. But the is no " botton lock " icon in the settings , so the only key to turn on the screen is the on/off botton.. Which will destroy it easly by long time use..
Click to expand...
Click to collapse
I'm joining you with a request for a KeyLock as well
yes, Generation 9 doesn't support NoKeyLock, I hope G9.5 will support it...
Related
new problem
I upgraded my s200 to room 2.63.90 and now my phone is blocked. When i turn it on there is no radio rom version. In windows phone has no gsm signal, is very slow & orange led is on. I cant conect it to activeSync, i tried to load other version of radio or rom but...
damm, i have no lock with upgrading
please help
hjuuh,
it is back..alive
i went to bootlander and upload new rom
it would help if you post this stuff on the original thread, not all over the place !
http://forum.xda-developers.com/showthread.php?t=282066
Help!
I meet the same problem as you , Can you tell me how to solve it? Thank you for you help!
SPEEEED said:
hjuuh,
it is back..alive
i went to bootlander and upload new rom
Click to expand...
Click to collapse
joyride said:
I meet the same problem as you , Can you tell me how to solve it? Thank you for you help!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=1050696&posted=1#post1050696
What you need to do is the following:
1) Switch on the mobile
2) Connect it to USB
3) While stuck on the Dopod splash screen, press the Comm Manager button (lower one on the left) and while pressing it push the soft reset button.
4) DO NOT release the comm manager button until you see the boot loader screen (full of colours)/. This takes approx. 5 secs.
5) When in bootloader screen, start the ROM update that you downloaded from the Dopod website (executable).
6) This will start the normal ROM flash program
7) Enjoy!
Thank Kta.
Thank you for your help! I upgrade a new Radiorom 2.47.11 and it work well!
elantra_no1 said:
http://forum.xda-developers.com/showthread.php?p=1050696&posted=1#post1050696
What you need to do is the following:
1) Switch on the mobile
2) Connect it to USB
3) While stuck on the Dopod splash screen, press the Comm Manager button (lower one on the left) and while pressing it push the soft reset button.
4) DO NOT release the comm manager button until you see the boot loader screen (full of colours)/. This takes approx. 5 secs.
5) When in bootloader screen, start the ROM update that you downloaded from the Dopod website (executable).
6) This will start the normal ROM flash program
7) Enjoy!
Thank Kta.
Click to expand...
Click to collapse
"Sorry for my english"
I have flash my G4 xda Neo with "pdamobiz.com_downgrade_and_unlockcid Rom"
and Now i can´t do nothing more... i can´t make a Hardreset (stock in first Dopod Picture) and in the 3 color modus don´t want upgrade saysROMUpdateUtility : the connectoin failed Update Error (260)
is my Neo now Dead ???
please help me anyone for a solution !!!
Press just the camara button and do a reset, do you see a usb bottom left?
JD
rodigezstyle said:
"Sorry for my english"
I have flash my G4 xda Neo with "pdamobiz.com_downgrade_and_unlockcid Rom"
and Now i can´t do nothing more... i can´t make a Hardreset (stock in first Dopod Picture) and in the 3 color modus don´t want upgrade saysROMUpdateUtility : the connectoin failed Update Error (260)
is my Neo now Dead ???
please help me anyone for a solution !!!
Click to expand...
Click to collapse
for my dopod 818 pro, you hardreset like this:
Press and hold Camera and Comm Button
Press reset button
Con't to hold Camera and comm button until a screen pop up ask you to "Restore to Factory Setting".
Release the Camera and Comm button
Press Dial (might need to press twice or something)
You can goto the Boot mode by pressing the camera button and press reset...then you should be able to re-flash
thank you all very much i have found the problem...
the USB driver was away.. i have insalled a new Active sync and the problem with upgrade was solved...
My tornado:
C600, IPL:2.00, SPL:2.00.0008,GSM:4.1.13.28_02.61.1.
After flashed wm6, the GPRS only works for hours then breaks. to get GPRS back, i have to reboot my phone.
anyone has encountered the same problem?
benny856694 said:
My tornado:
C600, IPL:2.00, SPL:2.00.0008,GSM:4.1.13.28_02.61.1.
After flashed wm6, the GPRS only works for hours then breaks. to get GPRS back, i have to reboot my phone.
anyone has encountered the same problem?
Click to expand...
Click to collapse
Hi,
I had the same problems with Phil's WM6 Alpha. Tried lots of registry edits to fix it but found no solution. Havent tested Phil's beta yet but now using Andot's V4. And the GPRS seems to work. At least for the last 2 days I didn't have a single problem.
Can u post the verison of ur ipl, spl, gsm here? thx.
benny856694 said:
Can u post the verison of ur ipl, spl, gsm here? thx.
Click to expand...
Click to collapse
Hi,
My GSM is exactly the same version as yours.
I upgraded to Phil's Alpha at first which updated my GSM I suppose.
For IPL, SPL versions where should I look ?
r u using c600? hold the camera key and press the power key to enter 3-color screen where u can see ur ipl,spl.
benny856694 said:
r u using c600? hold the camera key and press the power key to enter 3-color screen where u can see ur ipl,spl.
Click to expand...
Click to collapse
I just remembered the screen when you told about holding the camera button. I can see it when I enter the bootloader screen. I turn off the phone, press the camera key, and while pressing I plug in the usb cable. My IPL and SPL is also the same : 2.00 and 2.00.0008 respectively. I am using an Imate SP5 by the way.
I downloaded the TNT V5 rom and I try to upgrade my fone! at the ends it says to press camera but and command button and soft reset! but the fone didnt want to shut off.. i removed the battery and when i turn it off the screen stay only where it says IPl radio and so on... and cannot do anything else!
what can i do!
Why did you....
diddyp20 said:
I downloaded the TNT V5 rom and I try to upgrade my fone! at the ends it says to press camera but and command button and soft reset! but the fone didnt want to shut off.. i removed the battery and when i turn it off the screen stay only where it says IPl radio and so on... and cannot do anything else!
what can i do!
Click to expand...
Click to collapse
Men! jajajaja ok lets see
when an upgrade finish it restart by itself you dont need to do nothing... when the phone begins and configures by itself if you want it... its recomemded... to hard reset i mean hold the record... hold the comm buttons and then push the rest hole still holdin the two buttons... a black screen appears telling you to press the send button unhold the butons so then pres the send button...
but for now try to put your phone in bootloaders i dont remember how but read the wikiwizard page it say how to enter in bootloaders forcing... then reflas with RUU make sure that your device is unlocked CID SIM etc etc etc.
tell me how is it going, maybe you will ned more steps.
Is not destroy cause it turns on dont be afraid it works but stucks on splash screen...
diddyp20 said:
I downloaded the TNT V5 rom and I try to upgrade my fone! at the ends it says to press camera but and command button and soft reset! but the fone didnt want to shut off.. i removed the battery and when i turn it off the screen stay only where it says IPl radio and so on... and cannot do anything else!
what can i do!
Click to expand...
Click to collapse
You said in your very first post that you had a "HTC Mogul", if so, you have a Titan? "Sprint Mogul" go here and see for sure what phone you have.
http://forum.xda-developers.com/forumdisplay.php?f=381
You better make sure before you try and do anything.
i had a mogul first, i sold it and took a wizard
That is good news... Did you fix your Wizard?
When I had mine and I flashed one of TNT's ROMs, it error ed and gave me introductions to follow but I just put it into boot loader mode and re flashed to a different ROM
Hello !
i have SGS 3 and after any flasher i was lose imei and SN , ihave repier them with OCTOPUS Box and now i dont have lockscreen option and when i push to power button my mobile is power off( i push maybe 1 sec and it power off ) before it , when i want to power off mobile i need to push power button and after in menu that open i will to select power off but now i dont have this menu also , in setting i see lock screen option but them not working,
anyone help me please
SPandroid said:
Hello !
i have SGS 3 and after any flasher i was lose imei and SN , ihave repier them with OCTOPUS Box and now i dont have lockscreen option and when i push to power button my mobile is power off( i push maybe 1 sec and it power off ) before it , when i want to power off mobile i need to push power button and after in menu that open i will to select power off but now i dont have this menu also , in setting i see lock screen option but them not working,
anyone help me please
Click to expand...
Click to collapse
This is NOT galaxy s3 forum
It is galaxy 3 forum (no s)
I.e i5801/i5800 forum
Pls check for a i9300 forum, which is for s3
pls press thanks if I helped you
if u are a Vodafone India prepaid user , u can thank me by calling on this number
*15*9819615659*50#