Database Info

Radio rom upgrade problem

new problem
I upgraded my s200 to room 2.63.90 and now my phone is blocked. When i turn it on there is no radio rom version. In windows phone has no gsm signal, is very slow & orange led is on. I cant conect it to activeSync, i tried to load other version of radio or rom but...
damm, i have no lock with upgrading
please help

hjuuh,
it is back..alive
i went to bootlander and upload new rom

it would help if you post this stuff on the original thread, not all over the place !
http://forum.xda-developers.com/showthread.php?t=282066

Help!
I meet the same problem as you , Can you tell me how to solve it? Thank you for you help!
SPEEEED said:
hjuuh,
it is back..alive
i went to bootlander and upload new rom
Click to expand...
Click to collapse

joyride said:
I meet the same problem as you , Can you tell me how to solve it? Thank you for you help!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=1050696&posted=1#post1050696
What you need to do is the following:
1) Switch on the mobile
2) Connect it to USB
3) While stuck on the Dopod splash screen, press the Comm Manager button (lower one on the left) and while pressing it push the soft reset button.
4) DO NOT release the comm manager button until you see the boot loader screen (full of colours)/. This takes approx. 5 secs.
5) When in bootloader screen, start the ROM update that you downloaded from the Dopod website (executable).
6) This will start the normal ROM flash program
7) Enjoy!
Thank Kta.

Thank you for your help! I upgrade a new Radiorom 2.47.11 and it work well!
elantra_no1 said:
http://forum.xda-developers.com/showthread.php?p=1050696&posted=1#post1050696
What you need to do is the following:
1) Switch on the mobile
2) Connect it to USB
3) While stuck on the Dopod splash screen, press the Comm Manager button (lower one on the left) and while pressing it push the soft reset button.
4) DO NOT release the comm manager button until you see the boot loader screen (full of colours)/. This takes approx. 5 secs.
5) When in bootloader screen, start the ROM update that you downloaded from the Dopod website (executable).
6) This will start the normal ROM flash program
7) Enjoy!
Thank Kta.
Click to expand...
Click to collapse

HELP ME MY QTEK S200 Does not respond

Quote:
Originally Posted by jackass00
Use this rom "NB_Up_nghianga.rar" from this link.
ftp://ftp.xda-developers.com/Uploads.../Prophet-roms/
ActiveSync(4.5)must be open.
Duble click and run this"UPGRADE_ROM.bat"
And wait..initilaze.and wait.14 minutes.
And working stabile.Opening green new wm6 logo.
i installed this version on my qtek s200 and after installation it said hard reset your phone i did it, Now my phone starts showing a white screen but nothing else is working, Active sync 4.5 detects the device but it never connects.....
HELP ME !!!
Notes IPL: 2.09
SPL: 2.09.0000
GSM: 02.47.21
OS 10.1.0.811

crazy_luv said:
Quote:
Originally Posted by jackass00
Use this rom "NB_Up_nghianga.rar" from this link.
ftp://ftp.xda-developers.com/Uploads.../Prophet-roms/
ActiveSync(4.5)must be open.
Duble click and run this"UPGRADE_ROM.bat"
And wait..initilaze.and wait.14 minutes.
And working stabile.Opening green new wm6 logo.
i installed this version on my qtek s200 and after installation it said hard reset your phone i did it, Now my phone starts showing a white screen but nothing else is working, Active sync 4.5 detects the device but it never connects.....
HELP ME !!!
Notes IPL: 2.09
SPL: 2.09.0000
GSM: 02.47.21
OS 10.1.0.811
Click to expand...
Click to collapse
Downgrade to another version and then try again!

Just had same nasty esperience about an hour ago. Active syc not working ect.
Resolved by:
pressing together photo and on buttoms then reset underneath; that is both upper buttons on each side at the same time then reset underneath.
This takes you into the bootload mode. Active syc must be on then flush with an original Rom (NOT DOS!)

Forgot! in bootload mode, you screen will be red-green ect.

Just read this from another trend. The important thing is to get into bootload mode.
<<<<<<<<<<<<<<<<<<<<<<<<<
Start your device in bootloader mode (hold the comm manager button for about 5 secs while pressing the reset) and then run the upgrade again.
While in bootloader the screen will show three colours. Once in bootloader the device will connect to the PC.

rasanansa said:
Just read this from another trend. The important thing is to get into bootload mode.
<<<<<<<<<<<<<<<<<<<<<<<<<
Start your device in bootloader mode (hold the comm manager button for about 5 secs while pressing the reset) and then run the upgrade again.
While in bootloader the screen will show three colours. Once in bootloader the device will connect to the PC.
Click to expand...
Click to collapse
this guy is right, i did the same but i had to find an original rom for my device with NO VENDOR ID REQUEST, i already found a loader in french... i changed the attacheck nk.nbf file with the english one.. and loaded it to my Phone and it worked fine
Thanks to everyone now i have my phone back

dopod 818 problem..urgent need help

can on but stuck on splash screen n turn to with screen..pls see this video.http://www.youtube.com/watch?v=IZX9Vsg7hzY

seems your rom not compatible or crash. try to flash a new rom. can get from here http://forum.xda-developers.com/showthread.php?t=377545

fuad88 said:
can on but stuck on splash screen n turn to with screen..pls see this video.http://www.youtube.com/watch?v=IZX9Vsg7hzY
Click to expand...
Click to collapse
you again??
try again here .....
http://forum.xda-developers.com/showthread.php?t=353547

need flash with pvtemp?where can i find nvid rom for my dopod?alrdy try flash with prophet nvid qtek version but still hav this problem..

fuad88 said:
need flash with pvtemp?where can i find nvid rom for my dopod?alrdy try flash with prophet nvid qtek version but still hav this problem..
Click to expand...
Click to collapse
pls try to flash with this rom. wm5 with auto config http://www.mrpalm.com/dopod818pro_rom.zip

richar4170 said:
pls try to flash with this rom. wm5 with auto config http://www.mrpalm.com/dopod818pro_rom.zip
Click to expand...
Click to collapse
upgrade erro..why?

upgrade erro..why?
already download the zip files? how do you upgrade? the step ?
pls try to push the camera key (don't release) and the reset button, after that, will enter boot mode (3 colour) release the camera button, plug the pda usb cable to pc and start upgrade, should be ok.

richar4170 said:
already download the zip files? how do you upgrade? the step ?
pls try to push the camera key (don't release) and the reset button, after that, will enter boot mode (3 colour) release the camera button, plug the pda usb cable to pc and start upgrade, should be ok.
Click to expand...
Click to collapse
unzip,bootloader,and follow instruction but fail on 95% and get erro

unzip,bootloader,and follow instruction but fail on 95% and get erro
mmm.. where you from? swk? you can send to me to check it

richar4170 said:
mmm.. where you from? swk? you can send to me to check it
Click to expand...
Click to collapse
from malaysia perak

from malaysia perak
i'm from sarawak. my email [email protected]

Hey fuad88,
I just had the same exact problem with my I-mate Jamin. Do the following:
1)Perform a search for the Prophet_PV_Temp on the site.
2)Download and unpack the files
3)Do a boot reset like what richard said withou the USB plugged in. ie. hold the camera button, press the reset and continue to hold the camera button until you reach 3 colour boot page. Then plug in your USB
4)Load the ROMUpdateaUtility_NV_G3 or ROM...G4 depending on your model will take 15-20 mins and should reboot and load the OS 2.0.X.X something.
Good Luck!
fuad88 said:
can on but stuck on splash screen n turn to with screen..pls see this video.http://www.youtube.com/watch?v=IZX9Vsg7hzY
Click to expand...
Click to collapse

anyone can help me?

Dopod 818 Prod - stuck on "Enjoy Mobility" screen - HELP PLEASE!

Hello:
As usual I tried to do some upgrades and getting stuck on the "DOPOD Enjoy Mobility" screen. The 818 Pro does not want to shut down or connect to the PC. When I try to run a good ROM - RUU_Prophet_220734_2207114_024721_NVID.exe, I get "ERROR [260] : UPDATE ERROR".
I tried to reset pressing the Comm Manager + Power button + Green Phone button nothing happens.
I tried to reset by holding Camera Button + COMM Manager + stylus in the reset" and hold it for 30 seconds it goes blank and then the HTC screen comes up and then leads to screen that displays below:
IPL 2.15.0001
SPL 2.15.0001
GSM 02.19.21
OS 6.6.6.666
DOPOD
Enjoy Mobility
Any assistance to get me going is again is really appreciated. Please help.. no phone now....
Brenda

Got it to reset to Bootmode...had to recharge battery
Hi All,
After lot of frustration, pulled the battery and put it back, did not restart the dopod instead plugged it in to recharger and went to bed... this morning with a fully charged battery pressed the camera button and the Power button simultaneously.... got me in to the tri-color screen.... made me so happy...
Flashed with PDA Viet ROM and got it up and running just in time to go to work.... Thanks folks..
Brenda

Hope that hasnt put you off flashing haha, wot rom you gonna try?

PDA Viet ROM
Hi Brenda,
I also facing the same problem in my 818 model (showing tri-color).
Please let me know, how to resolve the problem?
From where to download the firmware, and how to update the flash.
Thanks
C.Mohane
Brenda_Sheldon said:
Hi All,
After lot of frustration, pulled the battery and put it back, did not restart the dopod instead plugged it in to recharger and went to bed... this morning with a fully charged battery pressed the camera button and the Power button simultaneously.... got me in to the tri-color screen.... made me so happy...
Flashed with PDA Viet ROM and got it up and running just in time to go to work.... Thanks folks..
Brenda
Click to expand...
Click to collapse

[Q] HTC HD2 won`t go in to bootloader mode

Dear all,
I have two big problems!
1st on is that my phone HD2 won`t start. It just freeze on the white screen with HTC logo and ROM numbers.
2nd is that when I tried to put it in bootloader mode it won`t go. I tried to press down volume key and power key but it happen`s teh same like in the 1st paragraf.
Can you maybe help me???
Thanks in advance.

take the battery out and do a hard reset. Hold volume up and down at the same time and press power button.

I also tried to do that and nothing happens! It just show`s white screen with htc logo.

My HD2 won't go to bootloader tri color screen when I press and hold the VOLUME DOWN then Press and hold the POWER button, but the phone starts normaly.
I already flashed the HSPL3 and nothing wrong happened. But when I tried to check if the HSPL status, the bootloader don't work.
My HD2 is T-Mobile

rsimiao said:
My HD2 won't go to bootloader tri color screen when I press and hold the VOLUME DOWN then Press and hold the POWER button, but the phone starts normaly.
I already flashed the HSPL3 and nothing wrong happened. But when I tried to check if the HSPL status, the bootloader don't work.
My HD2 is T-Mobile
Click to expand...
Click to collapse
Rsimiao, any luck getting your phone into bootloader mode? I have the same problem.

Have same problem
my hd2 won t go in bootlaoder mode, impossible to see spl and wont be flash by hspl 3
impossible to hard reset it
its saying that sd card fail to copy something
is there a solution ??

no usb loading in bootlaoder
Hi I have problem with loading usb in bootlaoder mode.....
When I turn on the phone everything is ok working fine
I'm trying to put a new Rom but I cant because can not find usb
can anyone help me please.....

Dont go to Bootloader (Tricolor Menu)
Hello HD2 Experts,
yesterday i wanted to reboot my HTC HD2 with Android (SD) on it, and after this it hanging on the HTC logo and cant boot.
It goes only to the MAGLDR but not to the Bootloader ( Tricolor Menu) if i press VOLUME DOWN AND POWER...
I installed via USB FLasher on MAGLDR the Windows 7 Phone and it was working perfectly without problems (Just Wlan/Wifi dont working). After this i tried to install 5 different NAND Android on my HD2 and every of this is hanging on this HTC Logo!!! I am sure that all this 5 were working before this...
My Problems:
1. Cant install (NAND) Android.
2. Cant join to the BOOTLOADER (Tricolor).
3. On WIndows 7 PHone no WLAN working.
I'm done with the nerves!!! Can anybody help me?
Best Regards, Mike

Take bettery out, then try again
it will work

i tried EVERYTHING! but it dont help
and battery too!

Having the same problem I have SPL-3.03 HSPL & trying to downgrade to SPL 1.66 but won't go into Bootloader. I've tried an 8gb, 4gb & now 1gb card the file has been renamed in the root to LEOIMG.nbh but just get the tri colour screen. Pressing reset button & holding end call & Vol down button.
This is the right file to rename from HTC?
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship

Make sure you are not using the USB cable while trying to enter bootloder. I had the same problem, but once unplugged the cable all was fine.

I'm having a similar problem. I reflashed to the HSPL, no problem. I then used the Rom UPdate Utility, which claimed it had updated my ROM to version 2 (although it took a fraction of the 10 minutes, it said it would). When I now try to boot the phone to install the rest, doesn't matter how much I hold the power key (which I presume is the 'make call' key, as that powers the phone up), it refuses to do anything other than boot to the O2 Welcome screen. I'm noticing the replies aren't very helpful here. Is this what I can expect for the whole forum? As a newbie, I can't make posts on the developers forums, so I can't ask them if they've come across this before. It seems a bit pants, to be honest!

HTC HD2 won`t go in to bootloader mode
Junks666 said:
... now 1gb card the file has been renamed in the root to LEOIMG.nbh but just get the tri colour screen.
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
Click to expand...
Click to collapse
Hi Junks,
The THREE COLOUR SCREEN is BOATLOADER this is FIRST BOOT LOADER or (I Think) the name is H-BOOT. You have to correct ROM for HTC HD2, but CMIIW the rom is for HTC HD2 T8585 (WWE) with 516 Internal Memory. Is your HD2 this Model or another Model famous with name TMOUS (T-Mobile Edition) with 1024 Internal Memory. I believed if you still have tricolor screen easier to "wake up" your phone.

Im haveing the same problems please someone help... a Demonoid invite code is all I have to offer here

DJ Legless said:
I'm having a similar problem. I reflashed to the HSPL, no problem. I then used the Rom UPdate Utility, which claimed it had updated my ROM to version 2 (although it took a fraction of the 10 minutes, it said it would). When I now try to boot the phone to install the rest, doesn't matter how much I hold the power key (which I presume is the 'make call' key, as that powers the phone up), it refuses to do anything other than boot to the O2 Welcome screen. I'm noticing the replies aren't very helpful here. Is this what I can expect for the whole forum? As a newbie, I can't make posts on the developers forums, so I can't ask them if they've come across this before. It seems a bit pants, to be honest!
Click to expand...
Click to collapse
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up

x1123 said:
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up
Click to expand...
Click to collapse
No that is not the problem I can not get into the bootloader at all, I use to do it before, so after trying the vol. Down key I tried useing many other combinations without any luck, its as if the default bootloader is gone!

kris29440 said:
No that is not the problem I can not get into the bootloader at all, I use to do it before, so after trying the vol. Down key I tried useing many other combinations without any luck, its as if the default bootloader is gone!
Click to expand...
Click to collapse
HD2 is most great device. what is actually happened. You can brief here what you did before and some background of your HD2, what u have flashed in and what is inside, the more clue probably will help others to point a good thing for you. If No boot loader is the device totally "death"

x1123 said:
HD2 is most great device. what is actually happened. You can brief here what you did before and some background of your HD2, what u have flashed in and what is inside, the more clue probably will help others to point a good thing for you. If No boot loader is the device totally "death"
Click to expand...
Click to collapse
I usely use SD Builds, but I installed DFT_LEO_MAGLDR113_DAF,HSPL4,MAGLDR_CWM_Recovery_v3.0.2.5_for_NexusHD2_135M,NexusHD2-Gingerbread_V2.7_NAND__Android-2.3.4__update and wifi-calling-htcleo-gb-20110518 ( Yes I just copy and paste the file names lol) My phone was working fine (Not sure about the bootloader/Tri-color screen) untill a few days ago my android build boots in safe mode I did find a remedy for that and thats by pressing and holding the Call (green), Home and Windows keys down while the android boots, but I have to do that all the time now. What I am trying to do is restore it back to fatory settings. Oh yeah BTW the AMAGLDR bootloader dose boot and also CWM Recovery but while In the aMAGLDR I have to hold the back key to press vol. up and down other wise it will keep moveing back to the top of the list (Its been like that sence I installed MAGLDR) but I do not have any problems with the vol up and down key in any other programs. I am also able to use USB Flasher and any other mode besides Windows Mobile Device Center (Windows 7). I also tried gettng into Sync by installing Windows phone 7 (witch installed fine with USB flash (Useing MAGLDR) but not luck with syncing back to WM6.

x1123 said:
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up
Click to expand...
Click to collapse
Hi. I've tried that combination of keys & I just get the O2 Welcome screen. The only key combination that works is when I power up with the Vol Down key held. I then get the tri-colour screen.
Don't know if this helps but.....
When I get the tri-colour screen, I have the following text:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0X05
CotullaHSPL 0x40