I tryed to update my rom
I Had previously installed a cooked rom and it worked fine, however this rom failed on install
My tri colour screen shows the following info
CHEE100
IPL-0.20
CHEE100
SPL-1.40.OliNex
Serial
Can anyone tell me what file i can put on my Mini sd card to recover this phone
Thanks in advance for any help
Sorry, after re reading what i typed, i realized that it was probably a issue with the rom i had downloaded
So ive downloaded a new rom and this one installed fine
Sorry to have taken up a thread
If a mod see's this thread feel free to delete it
Sorry again
Related
hi there
i am using imate jamin da problem with my cell is
i upgraded my rom to qtek 2.20000 it was working absolutely fine with 8 icons in my comm manager then i upgraded to RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-b1 and it has severely damaged my cell as my phone my phone hangs white booting it shows me the colour screen with
IPL 1.00 and SPL 2.20.0001
on the Screen
OS and GSM is not displayed
I tried rom update several times but its not working
i tried to update my rom through boot loader mode but again failed
i even tried to format my phone but it gives FAT16 format failed
I even tried to upgrade to jesters RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1 but still its not working and givng same problem
now i dont understand what to do
guys please give me Advice and solution for this g3 g4 Problem
i even tried sending my phone to service center but stupid people dont know how to solve it and they returned me back
Thanks in Advance
You have bricked your phone... You just can't install a G4 rom on a G3 phone... Different chipsets are the cause of the problem... Sorry
you mean to say its over ?????????????
there should be any way
You'll have to wait to see if Jesterz manages to produce a goldcard...
BTW a goldcard it's basicly a mem card with a rom in it that autoinstalls itself thus no need for the usb connection... This fits your case cause you don't have an active usb conection because of the driver/chip conflict...
wrong software
I have the same problem i tried to flash my g3 with jesters RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1 by mistake and it was ok until the end of process when i finich it with congratulations and bla bla my device stills in the bootloader mode all the time. I can now connect and start to flash but when it comes to 80% of the process it stops with error 360 wrong command. Pleas is there any help for some kind of downgrade flash or so because it can only get boootloader but never start with software. When I try with jesters RUU-Prophet-g3-AKU2.2-2.20-2.47.21-Jester-r1 the whole process finish ok but the phone stills in bootloader. The same thing is also with RUU-Prophet-g4-AKU2.2-2.20-2.47.21-Jester-r1 I can not execute step2
that's why you should read the "sticky" first before you do it.
I have a Dopod 818Pro from a friend of mine but in Chinese ROM, so I have to read a whole nite the sticky and found out what is my Dopod version, finally I found it is G3, so I did all the steps, from unlocked the CID till upgrade to Jester latest ROM for G3 and skip the G4.
please help
Yes i realy know that it was my fault and my big mistake so i vould not do it again but now i need help because it stills in bootloader i i can even start flashing the device that gives me hope that some kind of recovery is maybe possible.
Yes i also commited this mistake its my fault but i really need help my device still enters into bootloader mode.
ur problem
there is nothing to do anymore u have to wait u CANT DO ANYTHING ITS OVER
how do you mean it is over. Do you think that could not repair it. Is it possible with sd card or jesters gold card and how. Help me please if somebody knows
there must b some way to overcome this problem
jesterz's gold card isn't working yet, and for now it's only for G3...
My hardware is G3 but flashed by mistake with G4 and now is in bootloader mode so i can start flashing but i do not know with what and how. Could you please explain me how and where can i find and use goldcard for g3 if possible Thanks
have u tried holding the camera button while softreset and then flash rom again
Yes sure i tried to flash rom from jesters for g3 which is for my device instead jesterz g4 what i used by mistake and it passed ok but when i restart it stills in bootloader mode only, so i could flash but do not know which firmware should i use
i've the same symptomes as mjankovic and aarif_ziaee, (bricked my phone)
but the only things i think i've forgot, is to cid unlock my device before doing the step 2
i have a question.
i have the rom PDAMobiz_Prophet_WM5AKU3.3_v3301
(witch is not an auto installable tile, it's a folder containing exe, dll, bat and nb file)
is it possible to install it by using teraterm pro or mtty? (connected and install bats and cabs by thoses software)
ps : i'm sorry for my bad english, i'm french not going to my languages faculty since i'have bricked my phone. need to fix it soon !
help... i downloaded smart1's (normal, not clean) update, and launched UPGRADE_ROM.DAT from PC... it said initializing and everything... and then it reached to "copying something.dll' ... i waited 10 minutes or so then i got something like:
"error cant copy ....... because connection closed from remote... something like that."
i did NOT touch the imate during the process
and now when i turn on my imate i get the HTC with white background for a second but then it freezes on the blue "i-mate" screen... displaying:
IPL 2.13.0001
SPL 2.13.0001
GSM 02.20.21
OS 10.1.0.811
when i connect it to pc, windows does recognise and install my device but ActiveSync doesnt connect.
i tried removing the battery then putting it back in then pressing and holding the conn. button along with the power button and i DO get to the bootloader screen (with three colors) and then when i plug in the usb i get a small 'usb' word at the bottom of the screen, but still, ActiveSync doesnt connect... i tried installing the update again... but the program doesnt find my device
how can i make it work again ??? plz help me
thx in advance
Now you need to find a rom that will install from bootloader mode and not an update........
I don't think you phone is dead
JD
johnnyduk said:
Now you need to find a rom that will install from bootloader mode and not an update........
I don't think you phone is dead
JD
Click to expand...
Click to collapse
i read in another topic what u said above... thx for ur reply...
btw, i'm currently downloading a 56 mb file called:
JAMin_WWE_2130923_21309112_020720_ship.zip
it can be downloaded from:
ftp://ftp.clubimate.com/JAMin_WWE_2130923_21309112_020720_ship.zip
or (better direct link)
http://www.clubimate.com/support/JAMMIN/ROM/JAMin_WWE_2130923_21309112_020720_ship.zip
i suppose this is the file i shoudl install right now using bootleader mode ? right ?
my previous rom version was 2.13.9.23 (same as name of file)
so is this the file i shud be downloading right now ?
thx a lot in advance
Just BEWARE that the rom you download is for your phone, it will be for a G3 or a G4, if you get it wrong, your phone is DEAD.
Please read the wiki and stickies....................................
JD
please. my phone doesnt move. it stuck on login screen.:
any way to restore it? i tried to hard reset, soft reset...nothing..
i tried to install smart 1 and after this happened
Problem solved
Same problem for me, but I solved today:
I connected the phone to pc in bootloader mode, the pc see the phone and says ppc usb sync, but the activesync not started.
I tried to install a qtek official rom by dangaard (you can find it here: http://www.megaupload.com/it/?d=4ELWL078 ) and I solded the problem !
Thanks god!!!!
Please i have the same issue with my O2 XDA Neo - G4, i checked the official site but i don't understand german. Pls someone paste me a link to official Rom.
Twinsis said:
Please i have the same issue with my O2 XDA Neo - G4, i checked the official site but i don't understand german. Pls someone paste me a link to official Rom.
Click to expand...
Click to collapse
ftp://ftp.clubimate.com/JAMin_WWE_213923_2139123_022021_ship.zip
here is the official link for O2 xda or Imate Jamin
Same problem!
I had same problem but in my case with downgrade from WM6 to ASERG rom, i have downloaded RUU_Prophet_220734_2207114_024721_NVID.exe and that fixed my problem.
Hi guys,
i have updated my htc touch elfin whit an WM 6.5 ROM
and i think that it was for elf...(if that is important). So anyway it was working great, until the phone started to say to me that the memory is full and that i have to close programs. And the problem began in the morning when i restarted my phone. It went normaly first the *smart mobility* appeared and the the screen went blank!
after that it keeps doing that.
please help!
tnx
if your device doesn't load at all, try hard reseting it and see if that helps. if that doesn't help, try looking for SD card ROM flashing for your elfin.. so you can change the ROM to see if the problem is with the ROM or with the device.
whitch one? i have been looking for them but i cant find any ROM whitch could be flashed by sd card.
Hi Everybody. This is my first post here
I own an HTC Touch (Vogue) from Orange (Spain) and I would like to install WM 6.1 on it. Orange does not provide with WM 6.1 and I found on the internet that there is a Sprint version of it, so I decided to install it. I get "Error 270" it says the image is corrupt. I tried to make an splxploit-windows and nothing happens... I took a screenshot (attached file) of what I get... and it stays there. Nothing happens at all.
I tried to install other versions also... HTC Magician and others just to see what happens and always I get "Error 270". The only one I could install successfuly is the Orange Rom
I tried everything and can´t find a solution. Any help there please?
Thanks a lot! =)
PD: I am using Windows XP, ActiveSync 4.5 and in SPLXPLOIT-WINDOWS I am following this steps (I get stuck in step 4)
1) manually start in bootloader mode
2) disable USB in activeSync
3) check 'usb' appears at the bottom of the tricolor screen and that he device is recognized by XP. If not, try unplugging/repluging
4) run the corrected unbrick.bat
5) while still in (new) tricolor screen after loader update, upload a new ROM
Any ideas?
This is not a complaint... this is just how I feel::
It is really frustrating to post something for 1st time in a forum looking for an answer and not to get anything in three days.
Welcome to forums
Have a deep read on Wiki here
Also visit Vouge section.
Read, Search, Respect and Enjoy!
hy i wanted to upgrade my rom so first of all i backed up my contacts bla bla, took out sim and sd card, hard reset of the htc x7500 all well , i started the device and followed instructions on screen, connected the usb synced perfectly. executed Athena wrapper.exe all went well completed , everything was working fine, then soft reset the device to check if all was ok (ps. setup already finished on pc and mobile) and guess what the green light at the joystick comes up but nothing else blank screen ( hep me what can i do from this point, i can enter the boot loader, if i connect the usb, in the white bit of the boot loader i get from serial change to usb but on pc nothing saying sync connected or anything like that. il try reinstalling the active sync on the computer see if that works .
oh great gurus of this forum please help me with this urgent matter
thank you anticipated
ps it is my first time doing this , i have it knowledge, and i read for 5 hours inos and how to's from the forum before i did this and it still happened this mysterious problem hopefully not terminal (((
I hope that you did not take the hard spl from this forum.
This subforum and releases are for the X7510.
no i took it from the X7500 section , anyway i solved the problem :d thanks to the instructions from here :
h ttp: //forum .xda-devel opers.com/show thread.php?t= 326953
Link from above just delete the spaces and there you have it, i could not post it together as i am a new member and does not let me put the link yet.
i followed the link in the firs post ( the one replied to the quoted text) downloaded from there the rom update and from bootloader screen it went like a charm, after that i upgraded the rom to 1.58 witch i dont quite like it as it keeps showing only H instead of 3G or the type of connection either the settings i setup in the phone, and installed the AP4 platinum ROM and works well. hope others will get their problems solved like this too as i saw there are many with the same problem.