hello, I have a problem with a ipaq h6320 which a friend gave to me but is not working. it freeze in the SO start, seems that this rom is corrupt and try to restore it already with the hp RUU and don't work, also try enter by MTTY and only shows me strange symbols and not the usual USB> promt.... help me please!!!!
IPAQ H6320
Current Rom 1.11.10 ESP
The bootloader mode is working.
PSD: Sorry for my bad english and thanks for your help
Related
I recent have an error while Upgraging my Jam whith latest firmware..
Evrithig goes ok but after stage 1 I ve got DAWN screen
And my jam has not worked anymore ..
Look the attached Screen
maybe anyon know about this problem ?
Same Problem
Hi Xaoc,
I have the same problem with my T Mobile MDA Compact. My Compact does not work anymore, too. When I try to turn it on, it does not. It turns on the Bootloader mode. On the screen; at the top it writes "Serial" and at the bottom it writes "v 1.00" and thats all, it does not turn on anymore.
It occurs when I tried to flash my German ROM to English ROM.
Once I solve the problem I will inform you. Please inform me if you solve the problem.
Thanks
AE
Ok man..
I will post info here, or just send this devise to technikal support
Technical Support
Sending the device to technical support will be the last choice. If they accept the device as this condition under the warranty no problem otherwise they will charge too much money to fix the device!!!
AE
Hi Guys. I have absolutely the same problem see http://forum.xda-developers.com/viewtopic.php?t=19548 here. Try one thing. It´s not solution, but for me working as emergency solution. Try to pull a little bit back battery cover to disconnect battery for a second and then push it back. Try to push on/off button. Device should start. And never do a soft reset by soft reset button or by software reset button. Always use back side cover or the device start in bootloader meno again.I alread try almost everything to solve the problem and no way. Even my compact cant read backuped SD card. That´s why I have only this emergency solution
I don't have this problem myself, but I read on this forum somewhere that connecting your Compact to to USB cable and running the update program again should fix this error. The error bascially means that the ROM upgrade failed. re-connecting and re-running the upgrade program from your desktop pc should work. Good Luck and let us know whether it works. In several other threads the problem is mentioned and fixed, so do a search.
It will work, trust me
When you see that "serial" and "v1.00" thing. That's means you are half way there already. That's in boot loader mode. When you take off the back cover (battery cover) and put that back, yeap... it'll work. Somehow that bypass the bootloader mode for that particular "restart".
What you need to do is. Just reconnect back and do the flash again, since you would have rebooted your desktop pc or laptop (the one that used to flash your Magician).
For those who encountered similar problem, restart your machine (desktop pc or laptop). then reconnect back. Try run the update again. This time, it will not be able to detect your current ROM version cause of the "boot loader" thingy. Just flash it... yes, you'll get it. Give it a try. I've done on mine and so do many others. Have fun.
cheers,
cyberjaya
I solve the problem
Hi all,
I had the same problem and finally I solved it, however now I have a French QTek S100 ROM.
Where can I find the file for upgrading the French Qtek S100 to English?
Thanks
AE
PS:I have a T Mobile MDA Compact however to fix my MDA, I upgraded with QTek S100 French ROM so I need QTekS100 English ROM now!
I had the same problem
Hi,
I had the same problem. My desktop computer shut off during the update and the second time it stoped in the same %.
I solved the problem switching computers to my laptop.
good luck
S100 English ROM
Where can I find the file for upgrading the French Qtek S100 to English?
Thanks
AE
PS:I have a T Mobile MDA Compact however to fix my MDA, I upgraded with QTek S100 French ROM so I need QTekS100 English ROM now!
T Mobile MDA Compact (using Qtek ROM)
ROM version: 1.03.02 FRE
ROM date: 11/02/04
Radio version: 1.01.00
Protocol version: 1337.38
ExtROM version: 1.03.157 FRE
I Mate JAM ROM
Hi All,
I used I Mate JAM ROM and now my MDA Compact is working in English.
AE
T Mobile MDA Compact (using I mate ROM)
ROM version: 1.06.00 WWE
ROM date: 01/06/05
Radio version: 1.01.00
Protocol version: 1337.38
ExtROM version: 1.06.150 WWE
Hi all
I have the same problem
When I upgraded my mda compact it started to upgrade
and it did not passed zero it tolled me just like in the picture in the first post
and it did it again and again and again
and finaly it crashed
it shows the boot loader
Serial
v1.00
Can you guys tell me how to fix it!!
Thx aloooooooooooooooooooooooooooooooooooooooot
qtek rom
hey cyberjaya..u said u r using the qtek rom on ur magician (mini) and m using the tx2.03 rom please can u let me know d difference between both roms which one
is better in each n every aspect that is m talkin about the (GUI),stability,features n etc..
please can u let me know so tht i can take a decesion whether to flash my device or not please...let me know.
thanks.
Chigz
help... i downloaded smart1's (normal, not clean) update, and launched UPGRADE_ROM.DAT from PC... it said initializing and everything... and then it reached to "copying something.dll' ... i waited 10 minutes or so then i got something like:
"error cant copy ....... because connection closed from remote... something like that."
i did NOT touch the imate during the process
and now when i turn on my imate i get the HTC with white background for a second but then it freezes on the blue "i-mate" screen... displaying:
IPL 2.13.0001
SPL 2.13.0001
GSM 02.20.21
OS 10.1.0.811
when i connect it to pc, windows does recognise and install my device but ActiveSync doesnt connect.
i tried removing the battery then putting it back in then pressing and holding the conn. button along with the power button and i DO get to the bootloader screen (with three colors) and then when i plug in the usb i get a small 'usb' word at the bottom of the screen, but still, ActiveSync doesnt connect... i tried installing the update again... but the program doesnt find my device
how can i make it work again ??? plz help me
thx in advance
Now you need to find a rom that will install from bootloader mode and not an update........
I don't think you phone is dead
JD
johnnyduk said:
Now you need to find a rom that will install from bootloader mode and not an update........
I don't think you phone is dead
JD
Click to expand...
Click to collapse
i read in another topic what u said above... thx for ur reply...
btw, i'm currently downloading a 56 mb file called:
JAMin_WWE_2130923_21309112_020720_ship.zip
it can be downloaded from:
ftp://ftp.clubimate.com/JAMin_WWE_2130923_21309112_020720_ship.zip
or (better direct link)
http://www.clubimate.com/support/JAMMIN/ROM/JAMin_WWE_2130923_21309112_020720_ship.zip
i suppose this is the file i shoudl install right now using bootleader mode ? right ?
my previous rom version was 2.13.9.23 (same as name of file)
so is this the file i shud be downloading right now ?
thx a lot in advance
Just BEWARE that the rom you download is for your phone, it will be for a G3 or a G4, if you get it wrong, your phone is DEAD.
Please read the wiki and stickies....................................
JD
please. my phone doesnt move. it stuck on login screen.:
any way to restore it? i tried to hard reset, soft reset...nothing..
i tried to install smart 1 and after this happened
Problem solved
Same problem for me, but I solved today:
I connected the phone to pc in bootloader mode, the pc see the phone and says ppc usb sync, but the activesync not started.
I tried to install a qtek official rom by dangaard (you can find it here: http://www.megaupload.com/it/?d=4ELWL078 ) and I solded the problem !
Thanks god!!!!
Please i have the same issue with my O2 XDA Neo - G4, i checked the official site but i don't understand german. Pls someone paste me a link to official Rom.
Twinsis said:
Please i have the same issue with my O2 XDA Neo - G4, i checked the official site but i don't understand german. Pls someone paste me a link to official Rom.
Click to expand...
Click to collapse
ftp://ftp.clubimate.com/JAMin_WWE_213923_2139123_022021_ship.zip
here is the official link for O2 xda or Imate Jamin
Same problem!
I had same problem but in my case with downgrade from WM6 to ASERG rom, i have downloaded RUU_Prophet_220734_2207114_024721_NVID.exe and that fixed my problem.
Hi all,
I have tried to install WM6 but got the really big problem. The installation success but my Dopod 818 pro can't start and hang on the black screen. Try to hard reset but show:
formatting to FAT,
format failed
Any expert can help me... or show me how to downgrade it back to normal...
i'm really new on this..
(
thanks,
Ezuan
Did you unplugged your prophet after getting the "FINNISH" message from windows screen? Once i didn't do it,then it happened to me what you explain. Reflash again and this time unplug it before doing hard reset. If you are not able to get it going, try reflashing a wm5 rom from anyware around, then flash wm6 (you have to downgrade)
Search for instance lsvw 2.3 or jesterz rom in this forum
regards
ezuanizam, I've had the same problem and I replied to you in another topic: http://forum.xda-developers.com/showthread.php?t=302110
Hi everyone,
Help Please!!!!!
I have a Dopod 818pro that was unlocked and was working ok, but I wanted better performance, so I tried to upgrade the ROM to AKU3.3.13.ASERG-us. It looked like it worked oK, but after the recommended hard reset, I get the "HTC Innovation" screen and then it freezes on the black screen shows the below:
IPL 2.15.0001
SPL 2.15.0001
GSM 02.19.21
OS 3.0.0.0
"Dopod Enjoy Mobility" and then it disconnects from the PC.
When I connect it to USB and do a hard reset the PC recognizes it when the HTC Innovation screen comes, but then disconnects from the PC. So essentially, I am not even able to connect to PC to reinstall my original ROM (RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe).
I would very much appreciate if any one can suggest a solution to reinstall my original ROM software...
Thanks in advance for advice...
Brenda
Hello,
Try pressing the camera button (hold on to it) and press RESET. You should be in bootloader mode now and the PC should be able to recognize the USB connection. If this works, try upgrading with the RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_ Ship.exe you mentioned. It should work.
Omg, i used too many "shoulds"... anyway it SHOULD work indeed
Oh..Thank You ....Thank You... it worked....
Hello Namco,
Thank You, Thank You.....I thought I fried the phone....your suggestion worked like a charm...
Thanks Again.
Brenda
Glad it worked
i used ttermpro.exe for upgrade my imate sp5m to wm6 and i excute 'format ALL' after that the phone refuse to boot up just a white screen and refuse to entre the bootloader, any ideas
thanks in advence for any suggestions
Been there done that, sorry to say this but you have bricked the phone.
can any bady show instriction for jtag my tornado (i mate sp5m)with images if you can please
i open it and i do not find the pin's where i connect jtag
thanks in advance and sorry for my english