Database Info

[32A][6.35] Overclock Kernel for 1.5 Sense ROMs - 710 MHz, 2.6.27.6, SetCPU Support

For
32A Magic on any Sense update based ROM
6.35 radio
Tested on CursorSense 1.2.6
AnyKernel version for any 1.5 Sense ROM 2.6.27.6 kernel
710 MHz is stable for 32A. It's well proven. Now.
If you are flashing this kernel over Cyanogenmod 5, I don't know what's wrong with you. The .27 kernel isn't meant for Donut, nevermind Eclair. Unless you know how to resolve some of the weird crap that will inevitably happen by you doing something like that, don't do it.
v3 Version works even when you setup setcpu profiles. enabled range from 176 MHz to 710 MHz. If you know how to customize setcpu, it is enabled to allow up to 768 MHz. included setcpu.txt that goes into /system/sd. Does not autodetect.
You can enable 729.6, 748.8 and 768 MHz by manually editing setcpu.txt.
ondemand governor seems to be buggy (exists also with Hero oc kernel, confirmed tests by than33). Try msm7k or performance instead.
Undervolted at lower speeds (245 MHz and down).
v2 Version is not setcpu compatible but does not require setcpu to scale properly. Does not display cpu frequencies. Possible dead on standby bug on some ROMs. SetCPU wont work because this kernel has perflock configured.
BOGOMIPS will still display 528 MHz but it is actually running at 710 MHz whenever 528 MHz is shown. Run a benchmark to see if it is actually faster.
Credits
phhusson and toastcfh for oc patch
cyanogen in general
cursordroid's kernel source
Teknologist original hero kernel
maxisma's edit to acpuclock.c
koush's anykernel
Notes
Kanged from various places
2.6.27.6 kernel
Using http://github.com/maxisma/Hero-OC-kernel edit plus cursordroid's HTC-CCR kernel 2.6.27
Linpack goes to 3.x
Bluetooth, GPS wifi all still work on my phone
If your phone wont boot, revert boot.img and wlan.ko by reflashing those files or reflashing your ROM entirely.
I deleted the kernel source off my computer for this. What you see is what you get

Can I just flash this over an existing cursorsense ROM then?

Yes, that's what i just did.
My score in linpack went from 2.32 (average) up to 3.13. And the phone looks stable and responsive.

shayne122 said:
Can I just flash this over an existing cursorsense ROM then?
Click to expand...
Click to collapse
That's the point

Haha sorry for that it was early and I'm a bit of a noob - anyway, definitely stable as hell so far, with only a bit more battery drain. Dolphin browser is noticeably smoother.
I was having issues a few weeks ago using any other kernel other than cursors, but this one is working fine (for the obvious reasons). Problem was yellowing and interlacing issues on the screen. I would be curious to try another ROM and flash this kernel to see if it would help those with the newer Rogers magics.
EDIT: don't do this. wouldn't boot past blank screen. wooooo ADB!

This is running on my 32A Magic right now. Everything seems okay actually.
Battery life doesn't seem much worse neither. This patch just bumps the frequency up without changing voltage.

WHat's about test with app Benchmark?
http://www.cyrket.com/p/android/softweg.hw.performance/
Before? After?
Real overclock or placebo?

If you still think this patch is placebo you have not been around for the last couple weeks

does it work on 2.1 Sense UI ROM (e.g. Smoki, CapySlide)?

Flashed on top of Capymod's ROM based on Sanpei's Legend 0.4 (Eris). Phone no longer boots.
6.35 Radio
1.76.2007 SPL
HTC Magic 32A (Rogers)
Reverted to pre-patched system.img and it's fine again though.

Do you think this is dangerous for the phone? I mean, I know there's always a certain risk, but is it high?

csjfong said:
does it work on 2.1 Sense UI ROM (e.g. Smoki, CapySlide)?
Click to expand...
Click to collapse
tried smoki, wouldn't boot. had to revert to nandroid backup.

I said this is for 1.5 Sense roms. Why are you guys even trying this for 2.1 roms?

Deviser said:
Do you think this is dangerous for the phone? I mean, I know there's always a certain risk, but is it high?
Click to expand...
Click to collapse
I know in computer OC'ing, the danger is heat, hence the advent of things like water cooling and fans the size of a hubcap.. If the same rings true, I don't think we have too much to worry about as the upping of the frequency hasn't put out any noticeable heat increase during gaming, calls, and regular usage. At least on my phone.
xaueious said:
I said this is for 1.5 Sense roms. Why are you guys even trying this for 2.1 roms?
Click to expand...
Click to collapse
Because we suck at reading.

Looks like Sense 2.1 roms won't work with this. Thanks anyway!

Strangely enough Linpack reports no apparent improvement after flashing the update over, still in the 2.2-2.3s. Using CursorSense 1.2.6.1, 6.35 radio, on top of 32A. Any ideas?

d3vi said:
Strangely enough Linpack reports no apparent improvement after flashing the update over, still in the 2.2-2.3s. Using CursorSense 1.2.6.1, 6.35 radio, on top of 32A. Any ideas?
Click to expand...
Click to collapse
I have the same setup and my results in Linpack went up to 3.1....Sorry, but I don't know how to help you any further.

xaueious said:
I said this is for 1.5 Sense roms. Why are you guys even trying this for 2.1 roms?
Click to expand...
Click to collapse
omnikai said:
Looks like Sense 2.1 roms won't work with this. Thanks anyway!
Click to expand...
Click to collapse
noobs, gota love em... haha

xaueious said:
If you still think this patch is placebo you have not been around for the last couple weeks
Click to expand...
Click to collapse
Ok. I'm testing, but...
I installed CursorSense 1.2.4 fresh after full wipe, then 1.2.6 and got problem with superuser, then installed 1.2.6.1 - problems with superuser were gone
Installed Linpack 1.1.2, tested without patch...
Then installed patch via recovery, started, tested with Linpack again
No 3.xxx points, same 2.390-2.410 points
Why?
I explore patch - it contain 08dalviklink script. After installing patch - script can be found in /system/etc/init.d. SO patch installed successfully, but why Linpack results are same???
p.s. In build version: Cursorsense32A-1.2.6 + Dalvik-Cachemod by xau. What's wrong?
p.p.s.
Turned wifi off. Results are same
Disconnect from computer. Results are same.

Second try
Wiped everything
Installed 1.2.4, then 1.2.6.1, then patch
Tested by Linpack - got 2.41
Disappointment...

Request for [RomPort][32a][3.22] SuperBad 1.6

Can any body port this great ROM or point me how to port as Alan has stop porting for HTC-Clay ROM
alan090 said:
am no longer doing superbad port due to my difference in views that htc-clay and I dont feel like seeing the bible on my twitter everyday...
so i respectfully stopped as I now have an acer liquid and will only be maintaining my CM mod for now
Click to expand...
Click to collapse

i second this as well... apparently superbad 1.6 is said to have a better battery life..

If you want to use the newest SuperBad, all you need to do is download any overclock kernel for 32A like pershoot's or dumfuq's (or mine) and flash it after flashing the 32B version of the ROM and it will work, for instance I'm running chromatic 2.1 on my 32A with no problems

i only found cyanogen kernel so far
http://forum.xda-developers.com/showthread.php?t=681165
so just flash this on top of the 32B ROM? sorry to ask this again but i just want to confirm once again before flashing
thanks for the answer

Yeah that's the kernel I ported. SuperBad is a heavily customized version of cyanogenmod but it still uses cyanogen's kernel. I know for certain that everything should work.

alright, thanks rps13!!!

lagu805 said:
alright, thanks rps13!!!
Click to expand...
Click to collapse
Waiting for your feedback....
Thanks.....

it's definitely working i can say.
just flash the kernel on top of the rom. this superbad is fast and very smooth in my opinion. however the battery life is still poor.

because superbad 1.6 base on CM5.08 T4 , I thought that you can try to change boot.img with CM5.08 T4 32A roms, my tim G2 is not here , I will try it latter

Request for PORT file for Chromatic 3.5 STABLE

Hi Guys,
Pls provide 32a port file for Chromatic 3.5 STABLE version
Orignal Link:http://androidspin.com/2010/06/25/rom-chromersmiths-2-1-chromatic-3-5-0624-v3-5-for-g1htc-dream/

like all CM-based rom you can just flash the rom and after the ebi kernel port.
work only with old (3.22) radio

hi what do you mean by 'after the ebi kernel port'?

cthulhu501 said:
like all CM-based rom you can just flash the rom and after the ebi kernel port.
work only with old (3.22) radio
Click to expand...
Click to collapse
i have tried. but i cant get 850 OC as he said , i can get 576 Oc only. i suspect BC only OC to 576 in all his kernel

just flash the ROM for G1, and then flash a kernel for 32A (there are a few).
once you apply the kernel, then thats all..
about the OC, of course you wont get it since ure using different kernel now.

[REQ] superFroyo for 32a

superFroyo v2.8.2 guys please port these rom for 32a device

we hope they will and i believe they will

Did you bother asking the developer?

gonna take some time for this to happen lol

Binary100100 said:
Did you bother asking the developer?
Click to expand...
Click to collapse
I asked one giant_rider is testing with some kernel function of this rom. But I wish some developer patches (as bcrook) created a patch for old radios

flash the Rom
flash port

davidcal said:
flash the Rom
flash port
Click to expand...
Click to collapse
work ??????

fonsigno said:
work ??????
Click to expand...
Click to collapse
Perfectly well

Well I don't think anybody should do any special port for any G1/32B roms.
I you wish to flash any of the roms in g1 section, the only thing you need to do is flash one of pershoot/bcrook/dumfuq 32A kernels on top of it and it will work just fine. Just make sure you flash the correct kernel version according to the rom base CM version.

In my opinion there is not a significant benefit to porting SuperFroyo since we now have other Froyo roms (without sense ui) that....
(1) Run on 32a 3.22 and 6.35 radios
(2) Have JIT working
(3) Have overclock kernels available up to ~700+ MHz
(4) Have Spareparts, CyanogenMod Settings and SetCPU for tweaking rom performance
These roms can now easily get 4.0-5.0 in Linpack and are stable.
Out of curiousity, I ported SuperFroyo a few days ago. The performance tweaks in SupSetup were not capatible with the .32 Sanpei kernel that was available for the 32a 6.35 radio at the time I did the port. We recently have the .34 kernel for the 32a 6.35 radio (thanks to carz12 and Switch33). I will update the ported SuperFroyo with the .34 kernel for the 32a 6.35 radio tonight or tomorrow hopefully. I don't think the result will be better than the other Froyo roms we have now, but I am happy to post a link if people want it.

thank you brother giant_rider for your hard work to give us the happiness
thanks you again giant

giant_rider said:
In my opinion there is not a significant benefit to porting SuperFroyo since we now have other Froyo roms (without sense ui) that....
(1) Run on 32a 3.22 and 6.35 radios
(2) Have JIT working
(3) Have overclock kernels available up to ~700+ MHz
(4) Have Spareparts, CyanogenMod Settings and SetCPU for tweaking rom performance
These roms can now easily get 4.0-5.0 in Linpack and are stable.
Out of curiousity, I ported SuperFroyo a few days ago. The performance tweaks in SupSetup were not capatible with the .32 Sanpei kernel that was available for the 32a 6.35 radio at the time I did the port. We recently have the .34 kernel for the 32a 6.35 radio (thanks to carz12 and Switch33). I will update the ported SuperFroyo with the .34 kernel for the 32a 6.35 radio tonight or tomorrow hopefully. I don't think the result will be better than the other Froyo roms we have now, but I am happy to post a link if people want it.
Click to expand...
Click to collapse
Hey giant_rider, I want link.
Thanks

giant please post the link

Here is a link to a ported SuperFroyo rom.
It is running Sanpei's .32 kernel for 32a 6.35 radio.
Some of the features in SupSetup are not enabled because they are not compatible with the kernel the way it is set up.
http://rapidshare.com/files/408904656/SuperFroyo2.4_32a_NR_v0.2.zip.html
I have been unable to get this rom to boot properly using the carz / switch .34 kernel. You can try flashing that kernel over this rom from recovery if you like. I think all of the settings in SupSetup could be enabled with the .34 kernel.
I am still sceptical whether this rom will be any better than the ones we have for 32a 6.35 or 3.22.
For a fast lite rom, I suggest you try flashing Switch's Fusebox Froyo, then install SetCPU and up the max CPU to 652 or 691 MHz. I did this tonight and got linpack of 4.6 and my phone is stable.

giant_rider,
Thanks

[rom] acura team v 20 b

Found New Rom in htc spain
ROM 20B in stock .. zip roteada CWR
-Roteada, superuser -Boot at 1150 OC We thank Comrade estrajo BERIARU that the boot of the 20B and has served us to make the OC causes the kernel l
Installation -From the recovery .. do not forget WIPES This intestate. (Just me). If there is any bug report it, but should only appear who are on official
http://www.wuala.com/jechus/ROMS/
Say thx Tor acura and when like press THX button

trying now

cjx75 said:
trying now
Click to expand...
Click to collapse
Same here.
Is there any other boot versions? The samba beta v2 had many to choose from.

Nope. Only one. But I am able to use with Samba boot option. So far so good. never hanged or ghost call.

Just installed over samba rom without any wipe. Used original boot from samba, i never overclock my phone. Everything is smooth, some apps are missing (cell broadcast widget :-( , whatsapp...) and some are added, some NeverWillUse buddy apps etc. I will definetly stay on this rom for some time.
Sent from my LG-P920 using XDA App

very nice, stable and smooth rom. (installed on german p920 over v21 thiaiz clean v.0.2)

Jechus said on htcspain.com that this rom is almos the same as samba, and that the final samba will be out soon. I wish samba will have gpu oc @400 MHz..

IFLPI
I wish samba will have gpu oc @400 MHz.
+1

Anyone know the difference between this and the AcuraTeam_20A_stock_SAMBA_.zip that is now showing in the download link?

Ok found 1 flaw so far , the camera fc and the phone reboots when u open the camera app in landscape mode.
overall a smooth rom

douglam said:
Anyone know the difference between this and the AcuraTeam_20A_stock_SAMBA_.zip that is now showing in the download link?
Click to expand...
Click to collapse
One is four p920
Other p920h

kampfbestie said:
One is four p920
Other p920h
Click to expand...
Click to collapse
Thanks. I have the p920, but I have tried the samba beta before and it works well for me as well. So is there a real difference?

Tested also both and didnt saw a difference
For dayly use im using rushdroid (modificated samba) also p920h

kampfbestie said:
Tested also both and didnt saw a difference
For dayly use im using rushdroid (modificated samba) also p920h
Click to expand...
Click to collapse
I would like to try rushdroid, but unfortunately there is only one OC speed at 1.2ghz and my phone is not really stable at that high OC. 1.15ghz is the highest it will go.

douglam said:
I would like to try rushdroid, but unfortunately there is only one OC speed at 1.2ghz and my phone is not really stable at that high OC. 1.15ghz is the highest it will go.
Click to expand...
Click to collapse
Have at time only the 1188 killer kernel maybe at home more here the link
http://hotfile.com/dl/148223809/0d47003/Samba2020.1188-KIllers.zip.html

samba beta corruptus had two files, which are also present in rushdroid ...... "netcfg" and "run-as" in-Bin System should be replaced for proper functioning ... informing Rhus to the fix
...............................................................................................................................................................
Soon new boots with the new kernel to different roms OC.compatbles with both 20B and 20A

jechus said:
samba beta corruptus had two files, which are also present in rushdroid ...... "netcfg" and "run-as" in-Bin System should be replaced for proper functioning ... informing Rhus to the fix
...............................................................................................................................................................
Soon new boots with the new kernel to different roms OC.compatbles with both 20B and 20A
Click to expand...
Click to collapse
Ok. Then I guess I should wait for the rushdroid to patch the ROM and release the different oc
boots before trying. 20B is good for me at the moment.

jechus said:
samba beta corruptus had two files, which are also present in rushdroid ...... "netcfg" and "run-as" in-Bin System should be replaced for proper functioning ... informing Rhus to the fix
...............................................................................................................................................................
Soon new boots with the new kernel to different roms OC.compatbles with both 20B and 20A
Click to expand...
Click to collapse
Nice. Would it be possible to make OC and undervolting kernel that will run 1,3GHz cpu and 400MHz gpu on Gingerbread rom as it is on Maximum Velocity froyo rom? I would like to have it on ginger cause I dont want to downgrade and flash Froyo baseband. It would be nice in a final Samba rom.

The BEST Rom for me!
Thanks

IFLPI said:
Nice. Would it be possible to make OC and undervolting kernel that will run 1,3GHz cpu and 400MHz gpu on Gingerbread rom as it is on Maximum Velocity froyo rom? I would like to have it on ginger cause I dont want to downgrade and flash Froyo baseband. It would be nice in a final Samba rom.
Click to expand...
Click to collapse
The kernel released by LG, for Ginger 21A ... does not work, does not the network coverage, and they have not fixed or released other.