Related
For Sapphire EBI1/32A users
All credits goes to Wesgarner and the people who his works based on.. (cyanogen etc.)
Original Thread: http://forum.xda-developers.com/showthread.php?t=592466
Now, the real stuffs-
EBI1 CFS Kernel (01/01/10): Here
EBI1 BFS Kernel (02/01/10): Here
Instructions
Nandroid BACKUP!
Wipe/Clear
Install WG Build Y R1 (thread link above)
Install EBI1 Port (link above)
Boot and wait~
Enjoy, folks!
Thanks your work
downloading the rom now.....great and thanks , mate!!
arctu said:
For Sapphire EBI1/32A users
All credits goes to Wesgarner and the people who his works based on.. (cyanogen etc.)
Original Thread: http://forum.xda-developers.com/showthread.php?t=592466
Now, the real stuffs-
EBI1 CFS Kernel (01/01/10): Here
EBI1 BFS Kernel (02/01/10): Here
Instructions
Nandroid BACKUP!
Wipe/Clear
Install WG Build Y R1 (thread link above)
Install EBI1 Port (link above)
Boot and wait~
Enjoy, folks!
Click to expand...
Click to collapse
Good work man, I'll try it!!
imho, it's one of the featured smoothest rom besides CM. try it with BFS kernel.
Hmm.. there seems to be little interest in this rom port. I'll discontinue the port if people don't want it.
Thanks a lot for the hard work. Will try it out mate
no many issues so far, everything seems to work well.
arctu said:
Hmm.. there seems to be little interest in this rom port. I'll discontinue the port if people don't want it.
Click to expand...
Click to collapse
Thank you. this is just what I was looking for. I was using bcrook's CM port in earlier versions and was doing ok(only some FCs in the first boot).
and since build Y I can't user bcrook's port with app2sd and swap..maybe something to do with the new kernel.
I did post in that thread if there is a 32A port prior the release, but guess too many people are just too excited for the new release and overlooked my post..anyway
please don't discontinue it, I am sure many people will like to run WG build on their 32A Sapphire.
just wondering, I saw your other thread MAGIC Port, can we use that with ANY dream/32B ROM? and more importantly, is is stable? (I saw an big red ALPHA..)
if so, can we also use that with WG-Build?
so you can take a rest now, then?
arctu said:
Hmm.. there seems to be little interest in this rom port. I'll discontinue the port if people don't want it.
Click to expand...
Click to collapse
Thanks for porting, this rom seems sexy. Lol. Aniwae, pls continue! Since it would be great to have this rom widely used on 32A radios.
@haozheng91
MAGIC Port is stable actually.
But no, for WG Build and few other roms, even though it ports properly, it doesn't do a full port. For Cyanogen Mod, WG Build Y, Enomether etc. they use custom kernels. When you use my magic port, well, it does work, but it's not using the intended kernel which the ROM creator compiled.
But anyway, your problem was you're using CM Port over WG Build Y.. that's incorrect because of the different ramdisk (the rom init script). Hence the A2SD failed.
---
the rom is stable so far for me. i'm loving it and the smoothness.
so far, no FC. though, BFS does drain battery.
What's the difference between CFS & BFS?
multitouch
wipe
flash WG-Build Y.R1 - CFS with RAM Hack
flash wgbuildy_ebi1_signed.zip - CFS kernel
everything is going well, but multitouch doesnt work ...
BFS: http://en.wikipedia.org/wiki/Brain_Fuck_Scheduler
Naturally, smoother UI but drains a little more battery.
@coltcha:
CFS somehow doesn't work. Try BFS. I'll recompile the kernel once wesgarner release another version.
Does this ROM include the radio image that will brick a 32A magic?
BFS drains more battery.. that's good to know.
if Cyanogen Mod and WG Build use different kernel, then what are some ROMs we can use your magic port? Cyanogen Mod is one of the most popular ROMs there..
what about any of the Eclair ROMs?
I have heard that BFS is supposed to be a little faster..but WG recommands CFS as BFS is not as stable or something.. as for the battery, I always have to recharge everyday, so can't really tell the difference between different ROM or kernel...
hikki2000 said:
Does this ROM include the radio image that will brick a 32A magic?
Click to expand...
Click to collapse
it doesnt.
@haozheng91
like i said, it'll work on any 32B roms.
it's just not a full port for cases of roms with custom kernel. so... if you go on to the dream forums, if the ROM dev say he compiled his own kernel... you will just not benefit from the custom kernel enhancement. that's all.
though, most of the time, the custom kernel isn't much of a benefit as they're usually just variants of existing kernels with different build configs. you'll also see that most devs tend to us CM kernel... especially eugene eclair roms and some senseui roms.
arctu said:
it doesnt.
Click to expand...
Click to collapse
So it is safe for me to flash the ROM and then apply your port file, with my current SPL and Radio? Thanks.
yes. it should be. but then again, flash at your own risk, i or the rom dev aren't responsible if you brick your phone.
arctu said:
Hmm.. there seems to be little interest in this rom port. I'll discontinue the port if people don't want it.
Click to expand...
Click to collapse
No No, buddy, please keep up your good work, we are glad to see the diversities.
For
32A Magic on any Sense update based ROM
6.35 radio
Tested on CursorSense 1.2.6
AnyKernel version for any 1.5 Sense ROM 2.6.27.6 kernel
710 MHz is stable for 32A. It's well proven. Now.
If you are flashing this kernel over Cyanogenmod 5, I don't know what's wrong with you. The .27 kernel isn't meant for Donut, nevermind Eclair. Unless you know how to resolve some of the weird crap that will inevitably happen by you doing something like that, don't do it.
v3 Version works even when you setup setcpu profiles. enabled range from 176 MHz to 710 MHz. If you know how to customize setcpu, it is enabled to allow up to 768 MHz. included setcpu.txt that goes into /system/sd. Does not autodetect.
You can enable 729.6, 748.8 and 768 MHz by manually editing setcpu.txt.
ondemand governor seems to be buggy (exists also with Hero oc kernel, confirmed tests by than33). Try msm7k or performance instead.
Undervolted at lower speeds (245 MHz and down).
v2 Version is not setcpu compatible but does not require setcpu to scale properly. Does not display cpu frequencies. Possible dead on standby bug on some ROMs. SetCPU wont work because this kernel has perflock configured.
BOGOMIPS will still display 528 MHz but it is actually running at 710 MHz whenever 528 MHz is shown. Run a benchmark to see if it is actually faster.
Credits
phhusson and toastcfh for oc patch
cyanogen in general
cursordroid's kernel source
Teknologist original hero kernel
maxisma's edit to acpuclock.c
koush's anykernel
Notes
Kanged from various places
2.6.27.6 kernel
Using http://github.com/maxisma/Hero-OC-kernel edit plus cursordroid's HTC-CCR kernel 2.6.27
Linpack goes to 3.x
Bluetooth, GPS wifi all still work on my phone
If your phone wont boot, revert boot.img and wlan.ko by reflashing those files or reflashing your ROM entirely.
I deleted the kernel source off my computer for this. What you see is what you get
Can I just flash this over an existing cursorsense ROM then?
Yes, that's what i just did.
My score in linpack went from 2.32 (average) up to 3.13. And the phone looks stable and responsive.
shayne122 said:
Can I just flash this over an existing cursorsense ROM then?
Click to expand...
Click to collapse
That's the point
Haha sorry for that it was early and I'm a bit of a noob - anyway, definitely stable as hell so far, with only a bit more battery drain. Dolphin browser is noticeably smoother.
I was having issues a few weeks ago using any other kernel other than cursors, but this one is working fine (for the obvious reasons). Problem was yellowing and interlacing issues on the screen. I would be curious to try another ROM and flash this kernel to see if it would help those with the newer Rogers magics.
EDIT: don't do this. wouldn't boot past blank screen. wooooo ADB!
This is running on my 32A Magic right now. Everything seems okay actually.
Battery life doesn't seem much worse neither. This patch just bumps the frequency up without changing voltage.
WHat's about test with app Benchmark?
http://www.cyrket.com/p/android/softweg.hw.performance/
Before? After?
Real overclock or placebo?
If you still think this patch is placebo you have not been around for the last couple weeks
does it work on 2.1 Sense UI ROM (e.g. Smoki, CapySlide)?
Flashed on top of Capymod's ROM based on Sanpei's Legend 0.4 (Eris). Phone no longer boots.
6.35 Radio
1.76.2007 SPL
HTC Magic 32A (Rogers)
Reverted to pre-patched system.img and it's fine again though.
Do you think this is dangerous for the phone? I mean, I know there's always a certain risk, but is it high?
csjfong said:
does it work on 2.1 Sense UI ROM (e.g. Smoki, CapySlide)?
Click to expand...
Click to collapse
tried smoki, wouldn't boot. had to revert to nandroid backup.
I said this is for 1.5 Sense roms. Why are you guys even trying this for 2.1 roms?
Deviser said:
Do you think this is dangerous for the phone? I mean, I know there's always a certain risk, but is it high?
Click to expand...
Click to collapse
I know in computer OC'ing, the danger is heat, hence the advent of things like water cooling and fans the size of a hubcap.. If the same rings true, I don't think we have too much to worry about as the upping of the frequency hasn't put out any noticeable heat increase during gaming, calls, and regular usage. At least on my phone.
xaueious said:
I said this is for 1.5 Sense roms. Why are you guys even trying this for 2.1 roms?
Click to expand...
Click to collapse
Because we suck at reading.
Looks like Sense 2.1 roms won't work with this. Thanks anyway!
Strangely enough Linpack reports no apparent improvement after flashing the update over, still in the 2.2-2.3s. Using CursorSense 1.2.6.1, 6.35 radio, on top of 32A. Any ideas?
d3vi said:
Strangely enough Linpack reports no apparent improvement after flashing the update over, still in the 2.2-2.3s. Using CursorSense 1.2.6.1, 6.35 radio, on top of 32A. Any ideas?
Click to expand...
Click to collapse
I have the same setup and my results in Linpack went up to 3.1....Sorry, but I don't know how to help you any further.
xaueious said:
I said this is for 1.5 Sense roms. Why are you guys even trying this for 2.1 roms?
Click to expand...
Click to collapse
omnikai said:
Looks like Sense 2.1 roms won't work with this. Thanks anyway!
Click to expand...
Click to collapse
noobs, gota love em... haha
xaueious said:
If you still think this patch is placebo you have not been around for the last couple weeks
Click to expand...
Click to collapse
Ok. I'm testing, but...
I installed CursorSense 1.2.4 fresh after full wipe, then 1.2.6 and got problem with superuser, then installed 1.2.6.1 - problems with superuser were gone
Installed Linpack 1.1.2, tested without patch...
Then installed patch via recovery, started, tested with Linpack again
No 3.xxx points, same 2.390-2.410 points
Why?
I explore patch - it contain 08dalviklink script. After installing patch - script can be found in /system/etc/init.d. SO patch installed successfully, but why Linpack results are same???
p.s. In build version: Cursorsense32A-1.2.6 + Dalvik-Cachemod by xau. What's wrong?
p.p.s.
Turned wifi off. Results are same
Disconnect from computer. Results are same.
Second try
Wiped everything
Installed 1.2.4, then 1.2.6.1, then patch
Tested by Linpack - got 2.41
Disappointment...
Can any body port this great ROM or point me how to port as Alan has stop porting for HTC-Clay ROM
alan090 said:
am no longer doing superbad port due to my difference in views that htc-clay and I dont feel like seeing the bible on my twitter everyday...
so i respectfully stopped as I now have an acer liquid and will only be maintaining my CM mod for now
Click to expand...
Click to collapse
i second this as well... apparently superbad 1.6 is said to have a better battery life..
If you want to use the newest SuperBad, all you need to do is download any overclock kernel for 32A like pershoot's or dumfuq's (or mine) and flash it after flashing the 32B version of the ROM and it will work, for instance I'm running chromatic 2.1 on my 32A with no problems
i only found cyanogen kernel so far
http://forum.xda-developers.com/showthread.php?t=681165
so just flash this on top of the 32B ROM? sorry to ask this again but i just want to confirm once again before flashing
thanks for the answer
Yeah that's the kernel I ported. SuperBad is a heavily customized version of cyanogenmod but it still uses cyanogen's kernel. I know for certain that everything should work.
alright, thanks rps13!!!
lagu805 said:
alright, thanks rps13!!!
Click to expand...
Click to collapse
Waiting for your feedback....
Thanks.....
it's definitely working i can say.
just flash the kernel on top of the rom. this superbad is fast and very smooth in my opinion. however the battery life is still poor.
because superbad 1.6 base on CM5.08 T4 , I thought that you can try to change boot.img with CM5.08 T4 32A roms, my tim G2 is not here , I will try it latter
superFroyo v2.8.2 guys please port these rom for 32a device
we hope they will and i believe they will
Did you bother asking the developer?
gonna take some time for this to happen lol
Binary100100 said:
Did you bother asking the developer?
Click to expand...
Click to collapse
I asked one giant_rider is testing with some kernel function of this rom. But I wish some developer patches (as bcrook) created a patch for old radios
flash the Rom
flash port
davidcal said:
flash the Rom
flash port
Click to expand...
Click to collapse
work ??????
fonsigno said:
work ??????
Click to expand...
Click to collapse
Perfectly well
Well I don't think anybody should do any special port for any G1/32B roms.
I you wish to flash any of the roms in g1 section, the only thing you need to do is flash one of pershoot/bcrook/dumfuq 32A kernels on top of it and it will work just fine. Just make sure you flash the correct kernel version according to the rom base CM version.
In my opinion there is not a significant benefit to porting SuperFroyo since we now have other Froyo roms (without sense ui) that....
(1) Run on 32a 3.22 and 6.35 radios
(2) Have JIT working
(3) Have overclock kernels available up to ~700+ MHz
(4) Have Spareparts, CyanogenMod Settings and SetCPU for tweaking rom performance
These roms can now easily get 4.0-5.0 in Linpack and are stable.
Out of curiousity, I ported SuperFroyo a few days ago. The performance tweaks in SupSetup were not capatible with the .32 Sanpei kernel that was available for the 32a 6.35 radio at the time I did the port. We recently have the .34 kernel for the 32a 6.35 radio (thanks to carz12 and Switch33). I will update the ported SuperFroyo with the .34 kernel for the 32a 6.35 radio tonight or tomorrow hopefully. I don't think the result will be better than the other Froyo roms we have now, but I am happy to post a link if people want it.
thank you brother giant_rider for your hard work to give us the happiness
thanks you again giant
giant_rider said:
In my opinion there is not a significant benefit to porting SuperFroyo since we now have other Froyo roms (without sense ui) that....
(1) Run on 32a 3.22 and 6.35 radios
(2) Have JIT working
(3) Have overclock kernels available up to ~700+ MHz
(4) Have Spareparts, CyanogenMod Settings and SetCPU for tweaking rom performance
These roms can now easily get 4.0-5.0 in Linpack and are stable.
Out of curiousity, I ported SuperFroyo a few days ago. The performance tweaks in SupSetup were not capatible with the .32 Sanpei kernel that was available for the 32a 6.35 radio at the time I did the port. We recently have the .34 kernel for the 32a 6.35 radio (thanks to carz12 and Switch33). I will update the ported SuperFroyo with the .34 kernel for the 32a 6.35 radio tonight or tomorrow hopefully. I don't think the result will be better than the other Froyo roms we have now, but I am happy to post a link if people want it.
Click to expand...
Click to collapse
Hey giant_rider, I want link.
Thanks
giant please post the link
Here is a link to a ported SuperFroyo rom.
It is running Sanpei's .32 kernel for 32a 6.35 radio.
Some of the features in SupSetup are not enabled because they are not compatible with the kernel the way it is set up.
http://rapidshare.com/files/408904656/SuperFroyo2.4_32a_NR_v0.2.zip.html
I have been unable to get this rom to boot properly using the carz / switch .34 kernel. You can try flashing that kernel over this rom from recovery if you like. I think all of the settings in SupSetup could be enabled with the .34 kernel.
I am still sceptical whether this rom will be any better than the ones we have for 32a 6.35 or 3.22.
For a fast lite rom, I suggest you try flashing Switch's Fusebox Froyo, then install SetCPU and up the max CPU to 652 or 691 MHz. I did this tonight and got linpack of 4.6 and my phone is stable.
giant_rider,
Thanks
Hi. I want to overclock my i5800 but i don't want to install new kernel. I tried CM7 ROM and I liked more the original one.
So... Have any possibility to overclock without install a new kernel? Or... Install a kernel with ONLY a modification to overclock.
Since you are using CM7, you also have a new kernel.
The new kernel was required to make CM7 work.
If you also have Update 1 for Alpha 6 installed, I believe you can Overclock to 100 MhZ.
Dympy.
No. I'm not using CM7, I using a original ROM from samsung again. CM7 has a lot of fails at the moment.
I rooted my phone, so I can install kernels. But I don't want to change all kernel, only I wanted to overclock the CPU. It is possible? There is a kernel with the only change is the overclock?
First, you should flash new kernel ( recommend g3mod v2.2.1 OC). Then, install setcpu for OC. And link to download g3mod:
Code:
g3mod.com/g3rm/index.php?about=none
Yes, I know that if I install new kernel like g3mod I can overlock, the question is about don't change the original kernel....
Or the possibility to modify the original samsung kernel to ONLY open the possibility to overclock.
as far as my knowledge u wont OC ur process without install the kernel which supports over-clock...
You are saying that you want to drive a car at 400kmph but you don't wanna drive a veyron, and that's impossible
To overclock, you need to make some changes in the kernel, although it is possible to have a kernel with nothing more but overclocking, but why don't you use fugumod or g3mod.
I tried the CM7 ROM. And I don't liked the menus, the aspect, and the power button functions. I like how is from samsung, only I want more speed on CPU
I'm looking for the same solution! I like the original Samsung ROM, but I really want to overlock the CPU! I used Kyrillos' ROM v9.4, but I was not satisfied with it, so I've reinstalled the original ROM.
So pros, please give us a solution!
Milho said:
I'm looking for the same solution! I like the original Samsung ROM, but I really want to overlock the CPU! I used Kyrillos' ROM v9.4, but I was not satisfied with it, so I've reinstalled the original ROM.
So pros, please give us a solution!
Click to expand...
Click to collapse
Flash a oc kernel with odin and keep your stock rom
Sent from my GT-I5800 using xda premium
on my test mobile I have installed the XXJPU stock ROM
flashed the G3 performance 1.9 kernel, works perfect
by default the kernel runs at 800MHz
install setcpu (root required) and you can adjust the cpu
so in two words:
stock ROM with stock kernel -> no cpu adjustment possible
stock ROM with other kernel -> set your cpu in a range you like