EDIT: i have sent the Ozone package to oOkBa, please contact him for testing
EDIT:
thats true..sorry about that.
what was intended to be funny, actually came across giving the wrong msg..sorry guys!
SoCalSpecialist said:
i already bricked one Ozone today..lets give someone else a shot...
Click to expand...
Click to collapse
please edit your post that you did that by runing the Maple unlocker otherwise people won't like to test the Ozone sspl ...
Send away. I will try my Ozone
survey says?
did we get an end result here? or are we still testing?
I sent the package to a few users but have not heard anything. This could be good or bad. JockyW is pretty confident it will work. Here is the download link for the package if anyone wants to test it.
http://www.mediafire.com/download.php?ln1jhczdzym
Not working. Looks like the spl-cedar file is not proper, run that batch, verified all files did copy, even ran it off phone, same result, locked phone, battery pull out, restart.
tried it agian, waited it out, and the laptop started loading a USB driver for HTC. did not get aqnything else.
ookba said:
I sent the package to a few users but have not heard anything. This could be good or bad. JockyW is pretty confident it will work. Here is the download link for the package if anyone wants to test it.
http://www.mediafire.com/download.php?ln1jhczdzym
Click to expand...
Click to collapse
I'd be more than happy to try it out, but want to confirm that I just need to run auto.bat. Is that the correct process?
P
PriTyan said:
I'd be more than happy to try it out, but want to confirm that I just need to run auto.bat. Is that the correct process?
P
Click to expand...
Click to collapse
Go into the SSPL folder and run SSPL.bat. Follow the prompts. Hit OK on the phone, screen will go black. USB will disconnect and should reconnect. Wait for it. Let me know.
ookba said:
Go into the SSPL folder and run SSPL.bat. Follow the prompts. Hit OK on the phone, screen will go black. USB will disconnect and should reconnect. Wait for it. Let me know.
Click to expand...
Click to collapse
Screen when black, lost usb and I'm still waiting (been about 10 minutes now) How long should I give it before I pull the battery?
P
OK, I get a screen JumpSPL v1, and USB reconnects. Looks like its ok.
mbardsley said:
OK, I get a screen JumpSPL v1, and USB reconnects. Looks like its ok.
Click to expand...
Click to collapse
How long did you have to wait before the usb reconnected?
PriTyan said:
Screen when black, lost usb and I'm still waiting (been about 10 minutes now) How long should I give it before I pull the battery?
P
Click to expand...
Click to collapse
Well, after about 90 minutes, I noticed that windows installed some HTC USB drivers. Device is still unresponsive. Will pull the battery.
mbardsley said:
OK, I get a screen JumpSPL v1, and USB reconnects. Looks like its ok.
Click to expand...
Click to collapse
for Ozone users test as follows:
1. connect device and wait until activesync is ready
2. run sspl.bat from the SSPL folder and follow steps (note that it will start "JumpSPL" on your device and that you will have to confirm that by pressing OK
3. after usb reconnects and when your PC is finished installing the HTC Sync driver uncheck "allow usb connections in activesync" and try to connect with MTTY 1.42 (if you are on Win XP)
if you see a command prompt all is well and you can try to flash a splash
if the splash flashed okay you can install the hardspl by running auto.bat
...its been about 17 min now and still havent seen the "tri colored" screen yet.
i did go according to the instructions, and i got up to the part where the screen goes black and the usb disconnects.
will update if any changes.
SoCalSpecialist said:
...its been about 17 min now and still havent seen the "tri colored" screen yet.
i did go according to the instructions, and i got up to the part where the screen goes black and the usb disconnects.
will update if any changes.
Click to expand...
Click to collapse
you won't see tri-color ... the screen turns black
if it doesn't automatically reconnects usb then unplug, wait 5 secs and then replug usb cable
still nothing even with the extra instructions.
ive pulled the batt and resumed the way it was.
i did notice that jump spl was installed to the device tho..which i kno is a step in the right direction.
SoCalSpecialist said:
still nothing even with the extra instructions.
ive pulled the batt and resumed the way it was.
i did notice that jump spl was installed to the device tho..which i kno is a step in the right direction.
Click to expand...
Click to collapse
Note that you have to remove all cards (SD, SIM, ..) !!
You also have to press okay on the device to actually start JumpSPL
jockyw2001 said:
Note that you have to remove all cards (SD, SIM, ..) !!
You also have to press okay on the device to actually start JumpSPL
Click to expand...
Click to collapse
oh yea i know. i did that. i think that played in part of the problem in yesterdays fiasco.
Related
When flashing a ROM on my 8925, I get to the point where it looks like it is about to load, but it stays at 0% and goes nowhere. I tried looking for a fix, but only found the White screen of death which is different from my problem.
Please HELP!
Thanks!
sanguy888 said:
When flashing a ROM on my 8925, I get to the point where it looks like it is about to load, but it stays at 0% and goes nowhere. I tried looking for a fix, but only found the White screen of death which is different from my problem.
Please HELP!
Thanks!
Click to expand...
Click to collapse
Try flashing in bootloader.
Hold down Power button + Camera Button + insert stylus into reset.
Flash away.
sanguy888 said:
When flashing a ROM on my 8925, I get to the point where it looks like it is about to load, but it stays at 0% and goes nowhere. I tried looking for a fix, but only found the White screen of death which is different from my problem.
Please HELP!
Thanks!
Click to expand...
Click to collapse
Do you see the upload meter on your PC or on both PC and Phone? If only on the PC, then you might not have the HardSPL flashed or installed, which you would need to do first before you can flash to a new ROM. If you see the load meter on both screens, phone and PC and it hangs, then do what Alltheway suggested.
I tried that too. I have no problem getting to where it is about to load. It just won't load and stays at 0%.
I get 0% on both PDA and PC.
sanguy888 said:
I get 0% on both PDA and PC.
Click to expand...
Click to collapse
OK... Turn off your Fire wall and pause your Anti Virus program until the program loads to 100%.
Once more... Did you install the HardSPL?
Go here first if you have not installed the CID unlocker ( HardSPL)
http://forum.xda-developers.com/showthread.php?t=334679
I tried loading HardSPL. I get the same problem when trying to load HardSPL. 0% progress. I'll try stopping my antivirus to see if that fixes things. I also have an 8525 in which I'm able to flash ROMs with no problems on the same computer. I suspect it is something with my 8925.
sanguy888 said:
I tried loading HardSPL. I get the same problem when trying to load HardSPL. 0% progress. I'll try stopping my antivirus to see if that fixes things. I also have an 8525 in which I'm able to flash ROMs with no problems on the same computer. I suspect it is something with my 8925.
Click to expand...
Click to collapse
No it is not... The Qualcom processor behaves differently than the Samsung. So the loading environment one processor accepts is not necessary a common denominator.
Disable your Firewall and your AntiVirus and start fresh. Please read the HardSPL ( CID Unlocking) procedure carefully.
Thanks for clarifying that asfoor! I'll give it a try.
OK, I deinstalled my virus protection and turned off my firewall and still I get up to the point that a ROM (even for hardSPL) is about to load and nothing happens.
I did a hard reset and it looks like it cleared the problem. I was able to flash the hardSPL...Thanks everyone!
sanguy888 said:
I did a hard reset and it looks like it cleared the problem. I was able to flash the hardSPL...Thanks everyone!
Click to expand...
Click to collapse
You are on your way to become a ROM junkie .... like the rest of us... Congrats and glad to be of help.
sanguy888 said:
I tried loading HardSPL. I get the same problem when trying to load HardSPL. 0% progress.
Click to expand...
Click to collapse
I have the same issue.. And none of that software is even installed on this machine. I've tried the hard reset too. Still nothing. Any ideas?
same here..
0% and then i get a recovery message on my vista pc to eject my battery.
my95z34 said:
I have the same issue.. And none of that software is even installed on this machine. I've tried the hard reset too. Still nothing. Any ideas?
Click to expand...
Click to collapse
HardSPL is NOT the same as Hard Reset ! Please read the thread on Unlocking your CID.
YLA G said:
same here..
0% and then i get a recovery message on my vista pc to eject my battery.
Click to expand...
Click to collapse
You definitely have a Anti-Virus program that is conflicting with the install. I would try the install on another machine, then see if you get the same issue.
asfoor said:
HardSPL is NOT the same as Hard Reset ! Please read the thread on Unlocking your CID.
Click to expand...
Click to collapse
... lol ... Yeah, I know. I know what I'm doing. Im not a rookie. I've been flashing phones for like 2 years now. I was saying that I've even hard reset'd the phone and tried on a fresh hard reset. To no avail.
*** i got my phone up and running. i am using a very old firmware from at and t from 12/07. however, fromt this point on, any other rom that i try to use is giving me a 302 error, both official and cooked roms except for the old one. can anyone shine some insight on this? thanks.
UPDATE on current problem:
1) i tried to update to a custom rom for the first time. it had worked. i used hard spl 3.29, then installed the natf v4 rom. the rom worked fine and everything. however, it was not to my liking.
2) maybe this was my stupidest mistake because i am a newbie. i tried to install an official rom right after. when i did this, the phone was stuck on 89%, and just freezes. and now i am stuck at the tri color screen (boot screen).
3) nothing i load is working. can someone please point me in the right direction in what im suppoose to do from here. i tried the sticky thread, but i am not having any luck. i need this to work asap. please help. thanks all is aprpeciated.
when i try to install the same natf rom, i get the error 262. it doesnt even go past 0%.
when i try to install the original oem rom, it goes to 89%, and stops and gives me a 309 error.
there's plenty of stickies and other topics around that have potential solutions, try those first, post back if nothing's working.
Travito said:
there's plenty of stickies and other topics around that have potential solutions, try those first, post back if nothing's working.
Click to expand...
Click to collapse
yes ih ave tried. the phone is not workign whatsoever. it wont pass the at and t screen that show the R, G, and D numbers. i can do hard reset, that doesnt work. it just stops. im still searching all over the forum right now. but i need the right solution because i need to get this phone to work ughh im sorry if i seem like im asking to much. please any help is appreciated thanks.
i also cant plug it in through usb. after it freezes that stops too so i cant load anything to update the phone.
What version of hardspl are you flashing? Maybe your rom do not support that. try to manually go to tri color screen and see if it connect to USB or not.
cham1980 said:
What version of hardspl are you flashing? Maybe your rom do not support that. try to manually go to tri color screen and see if it connect to USB or not.
Click to expand...
Click to collapse
i beleive it was 3.29. how do i manually go into tri color screen? note i cant go pass the first screen
i am currently trying the sd card method to boot up with the kaidiag.nbh file. its not working. nothing boots up. its still freezing at the first screen.
bknewtype said:
i am currently trying the sd card method to boot up with the kaidiag.nbh file. its not working. nothing boots up. its still freezing at the first screen.
Click to expand...
Click to collapse
is there anythign specific i have to do to boot up from the sd card? sorry for so many responses i am panicing and ihave to ge tthis phone to work before i go to work in the morning..
hold down the camera button (FULL press) and soft reset, try flashing again
Travito said:
hold down the camera button (FULL press) and soft reset, try flashing again
Click to expand...
Click to collapse
thanks. i jsut tried that. it booted up and isntalled update. it went to the tri color screen, then to the white loading screen, and now im stuck again...
ok it got pass the white loading screen. now im stuck at the good ol tri color screen. anything i was trying to load fromthis point foward is not working. evrtygyhing either is stuck on 0% or it jsut gives me an error to go to recovery mode. please help. i jsut want to revert bck to the oem rom if possible. i just need my phone up and running.
i am getting the error RUU 302. where would i go about this to do it from scratch? as i mentioned i so far have 3.29 hardspl installed
updated and explained problems in detail on first post.
have a look at this thread http://forum.xda-developers.com/showthread.php?t=423486 , it explains how to get out of the bootloader mode...hope it helps...
The Reaper said:
have a look at this thread http://forum.xda-developers.com/showthread.php?t=423486 , it explains how to get out of the bootloader mode...hope it helps...
Click to expand...
Click to collapse
thanks for the response. i have been on that thread for about 2 hours now, but i still cant get it to work. if you can read my first post, i have updated to see my current situation. thanks.
OK which official ROM are you trying to install?
btstarcher said:
OK which official ROM are you trying to install?
Click to expand...
Click to collapse
the latest from the site. 3.57 i believe
I'm sorry, from which site? Is the filename RUU_Kaiser_CINGULAR_WWE_3.57.502.2_radio_sign_25.88.40.05_1.65.21.18_Ship.exe?
btstarcher said:
I'm sorry, from which site? Is the filename RUU_Kaiser_CINGULAR_WWE_3.57.502.2_radio_sign_25.88.40.05_1.65.21.18_Ship.exe?
Click to expand...
Click to collapse
yup thats the one. it stops at 89% and gives me the 302 error
Dang dude I don't know.
I was updating to froyo using the Odin installer and for some reason it stalled. I waited 10 minutes and nothing happened, it was stuck on DO NOT TURN OFF TARGET!! aaand being the genius that I am reset the Odin installer and phone...now I get nothing. The phone is completely unresponsive, no ! screen or anything.
Am I screwed?
edit: sorry for posting this in the wrong forum, please move to Q&A if a mod gets a chance.
close EVERYTHING, take everything out of your phone (sim, battery, and sd card.) then put the battery in but DONT TURN IT ON. have your usb cable ready. hold the two volume buttons down, and then plug in your usb cable to the phone (it should be plugged into your comp) WITHOUT PRESSING ANY POWER BUTTONS. if you get back into downloader mode, you are fine and can then restore using odin or the i click restore
hmmm, well try this take out the battery sim card and ex sd if u got one, open odin, put the battery back in and plug the usb in while holdin the volume buttons, aka download mode... sometimes it doesnt work the first time just try it a couple more...
I did this with my phone. If nothing comes on screen when you plug in the USB cable and entering recovery and download mode don't work, then take thye phone back to AT&T, they accepted my bricked phone back. Just act dumb like you have no clue why it's broken.
I have a similar issue, however I can still get into the downloader..but it just hangs when restoring on factoryfs.rfs....
Any suggestions on that?
hazard96 said:
close EVERYTHING, take everything out of your phone (sim, battery, and sd card.) then put the battery in but DONT TURN IT ON. have your usb cable ready. hold the two volume buttons down, and then plug in your usb cable to the phone (it should be plugged into your comp) WITHOUT PRESSING ANY POWER BUTTONS. if you get back into downloader mode, you are fine and can then restore using odin or the i click restore
Click to expand...
Click to collapse
I cannot explain how much you have just helped me at this moment. I did NOT expect this to work at all, and it did.
thank you, thank you THANK YOU truly
haha well seeing as you're new...
Welcome to the warm hearts at xda-developers
Have I mentioned how good it feels to see resolvable brick threads after the JH7 OTA disaster?
texasryno said:
I have a similar issue, however I can still get into the downloader..but it just hangs when restoring on factoryfs.rfs....
Any suggestions on that?
Click to expand...
Click to collapse
This happened to me as well, is there anything I can do?
jonttu said:
This happened to me as well, is there anything I can do?
Click to expand...
Click to collapse
Try a computer reboot / different USB port... sometimes USB gets interrupted when its flashing in big files like the factory.rfs
Zilch25 said:
Try a computer reboot / different USB port... sometimes USB gets interrupted when its flashing in big files like the factory.rfs
Click to expand...
Click to collapse
Thank you, had to switch the usb to one that was directly on the board, again much gratitude
It seems my phone is fully bricked, I tryed the download method with taking out everything. Nothing turns on, its completley blackscreened. I did have it working, but now its completley unresponsive.
mrbloog said:
It seems my phone is fully bricked, I tryed the download method with taking out everything. Nothing turns on, its completley blackscreened. I did have it working, but now its completley unresponsive.
Click to expand...
Click to collapse
Are you doing the method where you remove the battery first, hold the volume buttons (without power) and plug into USB? That *SHOULD* get you into download mode- if not, maybe check a different USB port.
Up and running, with Froyo to boot! Thanks again and good luck to those with problems. Thanks for the welcome again and I've made a donation in the site for saving my ass $500
HELP please HELP !!
I upgrade to Froyo and then wanted to go back to 2.1. The problem now I can only boot into download mode, but I tried to load other roms (one click, odin i9000 and Froy) and nothing happens! need help please!
dude, i love you for this.
monkas said:
I upgrade to Froyo and then wanted to go back to 2.1. The problem now I can only boot into download mode, but I tried to load other roms (one click, odin i9000 and Froy) and nothing happens! need help please!
Click to expand...
Click to collapse
Can you clarify? Did you successfully upgrade to froyo or incur and error somewhere in the process. When you say that "nothing happens" what exactly does that mean?
What does ODIN show when you try to upload?
vsboxerboy1 said:
Can you clarify? Did you successfully upgrade to froyo or incur and error somewhere in the process. When you say that "nothing happens" what exactly does that mean?
What does ODIN show when you try to upload?
Click to expand...
Click to collapse
Upgrade to Froyo successfully. Want to go back to 2.1 after using One Click Odin JF6 rom, it never ends. Following on from here, probe with OCD Froyo, eclair, odin and any rom could do to finish flashing. He stays in zImage and shows the status bar.
Any idea I can try?
monkas said:
Upgrade to Froyo successfully. Want to go back to 2.1 after using One Click Odin JF6 rom, it never ends. Following on from here, probe with OCD Froyo, eclair, odin and any rom could do to finish flashing. He stays in zImage and shows the status bar.
Any idea I can try?
Click to expand...
Click to collapse
This may seem elementary but I noticed your tag says your location says Buenos Aires. Are you sure you have a Captivate and not an i9000?
JOe K. said:
This may seem elementary but I noticed your tag says your location says Buenos Aires. Are you sure you have a Captivate and not an i9000?
Click to expand...
Click to collapse
Guys, good news! I recovered the phone and install Froyo. My error was that it came to how to download and then disconnect the USB and reconnected.
Joe K Captivate works perfect in Argentina because it uses the same bands as AT & T, send me a friend who lives in NYC, obviously unlocked.
Thank you all for your concern, I return to live!
Hi!
I'm new to flashing and tried to install clearRom in my P3115. The problem is that after reboot, the tablet wont start!
If I tried to connect it to the pc, drivers is nos installed / recognized and the batery logo appears but never charges. It show as is it is empty.
I can´t start it neither or access download mode or CWR mode. Odin does not recognize it neither!
Please, help! It's like dead!
Thanks a lot! :good:
Explain exactly what you did, and maybe someone can help you further. Good luck.
Sent from my Rezound using Tapatalk 2
JeramyEggs said:
Explain exactly what you did, and maybe someone can help you further. Good luck.
Sent from my Rezound using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the tip.
I just used Odin to flash clear Rom like explained here:
theandroidsoul cleanrom-custom-rom-for-galaxy-tab-2-10-1-guide/
Everything seems to be fine, but after restart nothing happened. I noted that if you plug the tablet to the usb port, it keeps looping the sound as when any usb is connected. Over and Over again.
It never starts, not even the Samsung logo. The only thing it does is, once plugged in, I can see the battery charge logo, but always empty.
Please, help!!
Thanks!
What kind of message do you get from Odin if you try to connect it and load a ROM? My tab was stuck also but I was able to get Odin load even when it looked like it was connecting.
jgfan1972 said:
What kind of message do you get from Odin if you try to connect it and load a ROM? My tab was stuck also but I was able to get Odin load even when it looked like it was connecting.
Click to expand...
Click to collapse
Hi jgfan!
It just worn´t work, I cant flash anything because i's like it never connects as the usb makes his connect / disconnect loop sound.
Odin never shows the ID:COM PORT rectangle as connected or colored!
Thanks for any tip.
Have you install the driver in your computer?
michaelzzz said:
Have you install the driver in your computer?
Click to expand...
Click to collapse
Hi Michaelzzz, I did!
I also installed Kies, but it's like a usb loop and never ends recognizin it!
I keep hearing the sound when you connect the usb over and over...
Not sure, what problem you face exactly.
This is what i understand, you get a battery logo while your device starts and wont boot up right? If yes, try these steps, might help you.
1. battery logo you get in the boot thats because, you have connected USB Cable to computer/Charger.
2. Make sure you have charge in battery so that while doing below steps, would be a problem.
3. Once you find, it has a enough battery charge you can disconnect the cable safely (If not place it for a wallcharger, untill the battery logo fills up the juice and you find it as charged completly)
4. While booting Press the POWER+VOLUME DOWN for Download mode.
5. Now connect your tablet to PC which has ODIN and sufficient drivers installed,
6. ODIN should detect to flash the ROM.
7. Download extact Firmwares from Sammobile site / from XDA links, which is suitable.
Hopefully it should bootup with no issues.
nagabushan.c said:
Not sure, what problem you face exactly.
This is what i understand, you get a battery logo while your device starts and wont boot up right? If yes, try these steps, might help you.
1. battery logo you get in the boot thats because, you have connected USB Cable to computer/Charger.
2. Make sure you have charge in battery so that while doing below steps, would be a problem.
3. Once you find, it has a enough battery charge you can disconnect the cable safely (If not place it for a wallcharger, untill the battery logo fills up the juice and you find it as charged completly)
4. While booting Press the POWER+VOLUME DOWN for Download mode.
5. Now connect your tablet to PC which has ODIN and sufficient drivers installed,
6. ODIN should detect to flash the ROM.
7. Download extact Firmwares from Sammobile site / from XDA links, which is suitable.
Hopefully it should bootup with no issues.
Click to expand...
Click to collapse
Dear nagabushan, thanks for your help!
I think the problem is battery related, cause the icon never fills up. It's like it cant charge batteries! The juice never even apears!
I'll leave it plugged in to the wall for a few our, and see what is going on.
I'll be back in a few hours!
Bootloader messed up. Sorry, only JTAG works with this.
jonttuv said:
Bootloader messed up. Sorry, only JTAG works with this.
Click to expand...
Click to collapse
Thanks jonttuv. Actually, after 6 hours, the battery juice is the same.
I'll check in the forum about this procedure.
If you already know anything, Can you please provide a good step by step to accomplish this?
Thanks in advance to all.
melbos said:
Thanks jonttuv. Actually, after 6 hours, the battery juice is the same.
I'll check in the forum about this procedure.
If you already know anything, Can you please provide a good step by step to accomplish this?
Thanks in advance to all.
Click to expand...
Click to collapse
This is just a guess, but i think that there is no JTAG unit(that is just plugged to the tablet and DOWNLOAD MODE ) There is a method that can be extremely dangerous.
This method is to open the tab, take the motherboard, find the correct pins and flash JTAG. I DO NOT TAKE RESPONSIBILITY FOR THIS METHOD NEITHER DO I SUPPORT IT!
The second method is to take it to the warranty. Download mode is not accessible so they can't tell if it's rooted, custom rom or anything like that. They will either send you a new device and voilá. That's it. Or they try to fix it. Google samsung galaxy tab 2 jtag. It will help you if you prefer the first option.
I just tried installing the Energy Rom from forum.xda-developers.com/showthread.php?t=2010108 and after I installed the Energy_JB_4.2.1_Partitions.zip file and rebooted I received the asus logo screen and then my tablet just went off. I tried rebooting into TWRP to continue installing the rom and just got a black screen. THAT'S ALL I GET NOW IS BSOD. I've tried holding down the the volume+power, just power, sticking a pin in the reset hole. NOTHING!!! However my light by the power button still lights up orange or green when charging.
IS THERE ANYWAY I CAN GET OUT OF THIS MESS??? I don't care if I have to wipe everything from the tablet. Just as long as I can get this thing to boot again in anyway would make me happy! :crying:
I would ask NRG as he was the one who created this zip. He will know more about it and its bugs/issues. Post in the energy thread if you haven't already.
Sent from my Nexus 7 using xda app-developers app
Take the back off, take the heatsink/metal plate off the device (WARNING THIS WILL VOID YOUR WARRANTY!!!!) Find the black cable with a white connector, disconnect it and connect it again.
CorkedA said:
Take the back off, take the heatsink/metal plate off the device (WARNING THIS WILL VOID YOUR WARRANTY!!!!) Find the black cable with a white connector, disconnect it and connect it again.
Click to expand...
Click to collapse
NOTHING!!!
When you have installed Energy, have you used offical 4.2.1 JB from Asus?
Hazard17 said:
When you have installed Energy, have you used offical 4.2.1 JB from Asus?
Click to expand...
Click to collapse
The more I think about it.... I think no. I was on Energy 12/22 which was 4.1.1 and then started the install of files. I installed the first one which was a 14MB partition file, it rebooted, I got the logo and then it shut off. The light still comes on though when I plug in the charger and changes from orange to green. But if I hold the power, power+volume, reset hole or anything else... Nothing happens.
Your tablet is unrecoverable bricked! You make misteak, because you should first install offical Asus JB 4.2.1 OTA via Fastboot.
Gogeta5026 said:
The more I think about it.... I think no. I was on Energy 12/22 which was 4.1.1 and then started the install of files. I installed the first one which was a 14MB partition file, it rebooted, I got the logo and then it shut off. The light still comes on though when I plug in the charger and changes from orange to green. But if I hold the power, power+volume, reset hole or anything else... Nothing happens.
Click to expand...
Click to collapse
Look at my signature and go to the link for getting into the bootloader menu. Don't worry with apx, just the info for the bootloader.
Good Luck!
tobdaryl said:
Look at my signature and go to the link for getting into the bootloader menu. Don't worry with apx, just the info for the bootloader.
Good Luck!
Click to expand...
Click to collapse
Thank you. I'll try it when I get home tonight from work!!!
Gogeta5026 said:
Thank you. I'll try it when I get home tonight from work!!!
Click to expand...
Click to collapse
Good Luck!
tobdaryl said:
Good Luck!
Click to expand...
Click to collapse
NO LUCK!!!
Not sure if this will help
If when you flashed this zip, and the 4.2.1 bootloader did manage to take I would try this.
Connect your device to your pc with the usb cable and power on like you would when normally trying to boot into bootloader (vol- & power)
Even though the screen is black if the bootloader did take then fastboot will be automatically running here.
Open command prompt (run as admin) and cd to your android-sdk\platform-tools folder and try command
Code:
fastboot devices
and see if you get a response.
If you do get a list with your s/n, then I would give my how-to a go & see if that works.
I'll try that tonight or tomorrow. I was going to try to find an identical one today at Best Buy and then return the screwed up one a few days later. But if I can save my original I'll just keep it and not go through all the hassle.
Sent from my LG-P930 using xda premium