Related
I did a list of downsides for each (only in relation to each other).
Downsides of Kaiser:
- relatively Big and heavy.
Downsides of Touch Cruise: (from more worse to less worse)
- No cheap version (like AT&T's TILT - $500 USD).
- Insensitive touch screen.
- Bad reception on Bluetooth.
- Mediocre build quality (loose volume control, etc.)
- No hardware keyboard (becomes a bigger problem if the touch screen is insensitive).
- Smaller xda community (might change in the future).
It seems like the choice should be easy, but I just don't know how easy it will be for me to live with a 200 gram brick in my pocket...
As a former kaiser and now a polaris owner, I can say:
The Polaris is cheaper than the kaiser
the touch screen works just fine (same as with the tilt)
community for polaris & kaiser is almost the same
the polaris has more & newer functionality (applies to original rom)
As a former kaiser and now a polaris owner, I can say:
The Polaris is cheaper than the kaiser
Click to expand...
Click to collapse
As I said, for the Kaiser there is the cheaper option of going with the AT&T TILT, which can be had NEW (with warranty) for $450-500 USD on ebay. The lowest price on ebay for which the Polaris can be bought is around $700 USD. That's a HUGE price difference, for two products which basically have similar functions and hardware.
the touch screen works just fine (same as with the tilt)
Click to expand...
Click to collapse
I've read just too many posts from people with the Polaris saying the touch screen is insensitive. Are you saying it's a non issue and both the touch screen sensitivity of the Polaris is not worse than the Kaiser ? (it's important for me to hear it from someone who came from the Kaiser).
Noam23 said:
I did a list of downsides for each (only in relation to each other).
Downsides of Kaiser:
- relatively Big and heavy.
Downsides of Touch Cruise: (from more worse to less worse)
- No cheap version (like AT&T's TILT - $500 USD).
- Insensitive touch screen.
- Bad reception on Bluetooth.
- Mediocre build quality (loose volume control, etc.)
- No hardware keyboard (becomes a bigger problem if the touch screen is insensitive).
- Smaller xda community (might change in the future).
It seems like the choice should be easy, but I just don't know how easy it will be for me to live with a 200 gram brick in my pocket...
Click to expand...
Click to collapse
I had a kaiser for 1 month or 2 also then sold it because I realized I didn't use the hardware keyboard as much as I thought I did.
When I took the cruise out of the box I thought it was a fake phone because it is lighter then the kaiser (obviously) and my s730, hell, even lighter then my Motorola v60 I think! lol
Here was my mini list
Kaiser:
More mechanical components mean greater chances of something physically breaking/wearing down. I drop kaiser on the city bus, I am screwed!
jog wheel works fine, but it's a little loose sometimes too, like the cruise volume slider (this thing is almost useless at the moment unless I can "work it in")
The hard keys on the front are great, but on a lot of kaisers, they are loose. I had two kaisers, and both hard key face plates were loose. had to send the first one back because depending on how much the plate had slid, i couldn't go up or down with the d pad.
I really liked the touch keypad that i installed on the kaiser, but the buttons were harder to press with thumb in corners or a long the side cuz of the groove where the screen meets the casing.
Kaiser is around the same size, but just a lot thicker obviously.
Thoughts on the cruise so far;
Volume slider sucks ass, have to use my nail to move it. Luckily whatever i am listening to i can either use that REALLY cool dial pad/jog wheel thing. I set hat more than I used the kaiser jog wheel. Or I use my headset.
The screen is flush with the sides and tops of the casing, so hitting buttons on the corners or sides are no problem, but if you have a case then it's the same as having a kaiser.
About the insensitive screen. I have to agree with you on that somewhat. With the kaiser, it looks like what's there is just the screen. But with the cruise, it looks like the screen is underneath another layer of something. This is how we have the flush face with the cruise, there is something else over the screen that the kaiser does not(i don't think at last) have. sometimes if you press hard enough (which you shouldn't have to do ) you can feel your thumb hit the "second screen" (the actual lcd), not the thing that we actually touch on top). It's hard to explain clearly
I have sensitives on very high using kaisertweak and playing with reg keys. I've got it pretty close to sensitivity of kaiser now. I do notice with cube i have to press a little hard to OPEN it, but not left or right or close it. kind of weird.
It's true about the communities, it is a little small right now, but also I think tytn i had abig following so it's natural tytn II would now also. but again, cruise and tytn ii are pretty much the same inside.
I bought my cruise for 699 Canadian, new.
The radio is really cool too (amazing, for such a high tech modern device, something as old school as an FM radio is what really impresses me.. lol)
Another gripe so far about cruise is that i dont know if its the rom i am using, or if its all roms, or if it's the extra layer over the screen, is that when I am typing out a message, with ANY keyboard, but ONLY in the messaging application, i get no feedback from the keys. Nothing highlights if i press it quickly. The letter appears, which is great, but i don't see any of the keys being highlighted unless i hold onto it longer. This could be the rom id downloaded, but i tried on 2 roms I think, and it might have even been like this on the original rom too, I can't remember. I am still trying to figure it out. But visual key feedback is very important to me. I didn't have that problem with the touch keyboard installed on the kaiser. I think I'll do some more testing on that tonight actually.
A few other things.. haha, on a roll.
With the Kaiser.. I noticed that the way I hold it with one had, my pointing finger woudl ALWAYS land on the damn camera lens because the lens is on the top half of the casing the back. Pretty annoying to obsessively clean that lens. With the cruise, the main camera is in the middle, and my finger does not touch it
I do admit the Kaiser is nicer to actually hold because of the rounder corners and it's thickness. If fits in the hand better.
The cruise has more of a rectangular/pointy shape. It takes a little getting use to but I didn't really notice the difference until today. Also, depends on how you hold it i guess.
Kaiser (i've never owned one, although I have a Hermes)too thick....looks dated (very shallow statement..I know)
Polaris..I've never had a problem with the touch screen...barring ofcourse when you try to select a different SIP from the taskbar.
The PocketCM keyboard is one the best touch software around...very intellegent...I was never a texter..but with this keyboard I very rarely have to backtrack my typing...and in general touch software is only going to get better.
besides IMVPO I dont like thick pullout keypads....
Just my 2 pence worth...
briggs81,
Thank you for your words.
From what you say I think I'll go with the TILT. I simply can't justify paying $200 USD more for the cruise. If they were both at the same price, I would have taken the cruise with its faults, but the price difference is the last straw.
In the following year I'm sure lots of great devices wil come out, including probably HTC devices with proper video drivers. We should always be ready to upgrade, and I don't feel the cruise is such a good investment at this time (if you're on a budget, that is).
Screen insensitive??? Lol, with the right tweak the screen is to sensitive haha...mine is quick and very alert for touches.
Yzord said:
Screen insensitive??? Lol, with the right tweak the screen is to sensitive haha...mine is quick and very alert for touches.
Click to expand...
Click to collapse
Maybe on your device, and in your opinion. No point in laughing.
Don't know about everyone else, but my screen is extremely sensitive, it has never missed a tap EVER. FYI, I roll w/o a screen protector (they ruin the look too much imo but I always keep the phone in its suede case when not in use). BTW, Kaiser is really a brick compared to the Polaris, and the polaris is pretty much a one handed phone for me whereas the Kaiser is definitely not, furthermore as far as looks there is really no competition. However, if you need the keyboard Kaiser is clearly the only choice. I emphasize need, bc you will most likely find that you get along just fine with the onscreen touch keyboard.
briggs81 said:
Maybe on your device, and in your opinion. No point in laughing.
Click to expand...
Click to collapse
No... this is true. There is not any touch-sensitivity problems with Polaris as it can easily (very easily) can be improved with some registry tweaks.
I own one of the first Touch Cruises (first one reported here in the Forum) and I also have a Kaiser for conducting an end-user custom ROM review. I am free to put my sim card in either device, but it always ends up in the Cruise. I have to force myself to keep the Kaiser active for any time over a few hours.
With the Kaiser custom ROM, I have all of the TouchFlo interface features as the Cruise. I have never perceived a problem with the screen sensitivity on the Cruise. To the contrary, I have more struggles with the Kaiser and most often, I find the landscape/portrait getting out of sync due to accidentally nudging the screen slider on then back off before the swap has time to apply. If you're bothered by the pointy corners on the Cruise, get the Orbit II but this is really only cosmetics. For me I have no issues with the volume slider on the Crusie. The scroll wheel is kind of free and easy, but for the limited number of times I've ever needed to use it, it works fine. I think you can tell which device I prefer. For me, even if it were $200-$250 less for the AT&T Tilt, I don't like it sitting side by side with the Cruise.
Indeed you can edit the registry setting for the sensitivity of the screen, although it is not needed (atleast for me).
I find it strange that you have to pay 200 dollars more for a cruise then a kaiser.
A kaiser here costs around 670 euro, the cruise costs about 500 euro
Also the pictures I am taking have far more better quality then on the kaiser.
Maybe my lense on the kaiser wasnt clean enough, i don't know.
But as said before here, the position of the camera is way better then on the kaiser. No more fears for dirty fingers on the lense
I switched from kaiser to touch cruise and until now i hadnt have one moment of regret
Damn it guys, you are making this decision harder for me
Regarding the screen of the touch cruise, how can you protect it if it's on the same plane with the sides of the device, I mean, how will the screen protector stay in one place and not move ?
I find it strange that you have to pay 200 dollars more for a cruise then a kaiser.
A kaiser here costs around 670 euro, the cruise costs about 500 euro
Click to expand...
Click to collapse
That's because you don't have the AT&T TILT version of the Kaiser in europe.
Regarding the screen of the touch cruise, how can you protect it if it's on the same plane with the sides of the device, I mean, how will the screen protector stay in one place and not move ?
Click to expand...
Click to collapse
The TC comes with a screen protector which sticks to the screen via adhesive (I haven't put it on though as I'm careful with the phone and keep it in its oem suede/microfiber case when I'm not on the phone).
BTW, I was actually in a position to get the ATT Tilt for just $100 after rebates and discounts...I still chose the Touch Cruise as its ridiculously better looking and a lot more usable for me as the flush screen paired w/Touch Flo allows for one handed usage (one-handed usage is key for me, esp as I'm a former Smartphone user).
FYI: I did pick up another smartphone from ATT to sell on eBay so that I could in a way subsidize the cost of the Polaris.
on tuch cruise screen sensitivity for finger, not for stylus. so its easy for finger & hard for stylus.
The TC comes with a screen protector which sticks to the screen via adhesive (I haven't put it on though as I'm careful with the phone and keep it in its oem suede/microfiber case when I'm not on the phone).
Click to expand...
Click to collapse
But can't it still catch a scratch from the stylus ?, is the screen of the touch cruise less prone to scratches ? (like the Iphone)
Also, using adhesive will destroy the look of the phone, no ?, and how will you take it off if you want without leaving residue ?
on tuch cruise screen sensitivity is for finger, not for stylus. so its easy for finger & hard for stylus.
Click to expand...
Click to collapse
Really, it will be easier using a stylus with the Kaiser than with the Cuise ?, a lot of software is still for stylus only...
I have never found a need for using a screen protector on any of my devices. As they have been passed down through my teenage sons, they too have learned proper care and use of the screens. With the Cruise, I definitely don't like to prospect of having a 'sticker' on the face if it. Just learn how to properly care for and use your screen and it will last.
I have never found a need for using a screen protector on any of my devices. As they have been passed down through my teenage sons, they too have learned proper care and use of the screens. With the Cruise, I definitely don't like to prospect of having a 'sticker' on the face if it. Just learn how to properly care for and use your screen and it will last.
Click to expand...
Click to collapse
I intend to put the phone in my jean's pocket (without anything else) with the screen toward the leg.
Could this thing cause a problem ?
alipi2007 said:
on tuch cruise screen sensitivity for finger, not for stylus. so its easy for finger & hard for stylus.
Click to expand...
Click to collapse
I don't have this issue, its easy for me to use my finger just as it is easy to use the stylus. Both require very little pressure. I did use a Kaiser in a shop once, and it actually required a lot of pressure (prob due screen protector they had installed on it).
I intend to put the phone in my jean's pocket (without anything else) with the screen toward the leg.
Could this thing cause a problem ?
Click to expand...
Click to collapse
I wouldn't think so.... but I would still use the oem suede/microfiber sheath, as its extremely thin and doesn't add to the bulk of the device, but protects it from lint, and any inadverdent scratches just in case something happens to already be in your pocket.
But can't it still catch a scratch from the stylus ?, is the screen of the touch cruise less prone to scratches ? (like the Iphone)
Also, using adhesive will destroy the look of the phone, no ?, and how will you take it off if you want without leaving residue ?
Click to expand...
Click to collapse
The screen seems very resistant to scratches from the stylus and the stylus glides across the screen without any resistance. In fact, you got me curious and I applied a moderate amount of strength to the stylus just to see and its still smooth as silk without any scratching.
As far as the adhesive from the screen protector, my guess is that this is a non-issue. I don't use screen protectors as they tend to look kind of cheap, but I'd imagine if it did leave any residue behind, it could be cleaned up fairly easily.
i own a htc touch cruise for about 10 days. after reading some of this forum's threads i still have 3 things to ask:
1. how do you clean your cruise? not only the screen, i mean the whole case. i've heard that some people have had problems with the paint on the case so i am trying to be cautious.
2. i couldn't have noticed that the volume button has an extremely bad build quality and is hard to operate with one hand. is there another way of silencing the phone while ringing without rejecting the call? i was thinking about AE Button Plus. can you sugest another way?
3. i tried to modify the FingerPressure in the registry but not only that i haven't seen any improvement (even after restart), but the default value was different from the one stated on this forum (around 2600 instead of 2908)
thank you. hope you'll have some answers for me.
For no.3, no problem at all, go ahead and change it to 10892
Mine also come with only 2600 initially. My friend used to tease me why dragged the screen (in camera album) so hard........
Yeah I remember one of the initial reviews stated that paint chipped off. There was a thread about this somewhere if you search for it, but if I recall correctly the consensus was that nobody had paint chip off their phone.
The people who complained about the paint chipping off got a preproduction device for initial review... and was even flimsier then ours...
10x to you all.
it turns out that you can indeed remap the volume function to another button. unfortunatelly after installing icontacts, aebuttons, igo 8 (for gps) and pocketCM keyboard i found out that my earpiece and mic don't work any more... i guess this is caused by igo but i'll do a hard reset and see.
EDIT: it's permanent. it doesn't work even after hard reset. stupid htc.
the plastic is colored black, there is no paint that can be chipping off
2&3 are true, the reg hacks don't make it any more sensitive, just changes when it thinks finger vs stylus.
TC has audio shielding problems too
hi!
This is my first post here. I have the following problem: yesterday my phone was fine...today not. Yesterday I was using the touch screen as usual with no problem, today the battery was to low and I turned off the phone. When I get back home, I connected the phone to charge it, and PUF!! the touch screen was not working at all...sometimes I can tap some menu, sometimes not, but in general terms, I can only use my phone with the keyboard. I did a soft and hard reset and nothing happened, I don´t know what else to do. I see this is kind of common problem, but no one has a common solution. Any suggestions?
Thanks!
My phone has windows mobile 6.1 Professional. CE OS 5.2.19971 (Build 19971.1.2.6)
ROM version 1.95.502.5 WWE
Radio version 1.02.25.32
Protocol version 52.39c.25.22H
u were able to use the windows 6.1 explorer? like looking for files under files explorer with no problem?
my phone is just as new as yours, i feel so frustrated! I was able just to use the keyboard, no touch screen commands were functioning. As i said, I have seen too many people complaining about this (if I would have known that, I would´nt buy this piece of crap)
dcgamboa said:
my phone is just as new as yours, i feel so frustrated! I was able just to use the keyboard, no touch screen commands were functioning. As i said, I have seen too many people complaining about this (if I would have known that, I would´nt buy this piece of crap)
Click to expand...
Click to collapse
At any time did you apply too much pressure on the screen?
Is your d-pad still working?
What about other hardware buttons besides the keyboard?
As I said, one day was working perfectly, and next day a kept it turned off since the battery was gone, and I was not at home to recharge it. So basically one day was fine and 12 hours later was not. The rest of the buttons are fine.
I did a hard reset, and at some point of the process the device indicates that I need to align screen, so a small cross show up in the middle of the screen (yo oughta know how is this...) well: I tap the cross and nothing happens....I tapped again...and nothing happens...3 tries later, finally the cross moves and the process goes on, To complete the process it takes me about 15 minutes!!!!!! but still nothing works out, the align screen process starts over again, and thats it!
At least, before the hard reset I was able to start my phone....now is impossible
Dont know what to do...
dcgamboa said:
As I said, one day was working perfectly, and next day a kept it turned off since the battery was gone, and I was not at home to recharge it. So basically one day was fine and 12 hours later was not. The rest of the buttons are fine.
I did a hard reset, and at some point of the process the device indicates that I need to align screen, so a small cross show up in the middle of the screen (yo oughta know how is this...) well: I tap the cross and nothing happens....I tapped again...and nothing happens...3 tries later, finally the cross moves and the process goes on, To complete the process it takes me about 15 minutes!!!!!! but still nothing works out, the align screen process starts over again, and thats it!
At least, before the hard reset I was able to start my phone....now is impossible
Dont know what to do...
Click to expand...
Click to collapse
well then you have several options:
1) bring phone back to the entity you purchased it from considering you stated it was new it should be covered under warranty unless you purchased it from eBay w/o warranty
2) If you know it is the Touch Screen then I suggest using xda search function and searching "Think your digitizer is broken" and apply it the Fuze rather than the Tilt
3) attempt to replace the screen
4) sell it "as-is" for a loss
Problem solved!!!
Thanks guys for the suggestions. This seems to be a very common problem. But in my case the solution was simpler than I would ever though!! I read in other posts that this unresponsive touch screen problem is usually created by particles of dust, (sand! in my case), stuck in that tiny gap between the screen cover and the phone body, and the solution was to gently pass a piece of paper thin enough, (flexible plastic CD cover, in my case) well....Having tested all kinds of software """solutions""", and been prepared to pay for an expensive fix (I live in Costa Rica, this kind of phones are not common use, so fixes are expensive)...so I gave I try to this solution...and surprisingly IT WORKED...there were lots of dust, and even sand grains stuck in that gap, and like the phoenix...my phone got back to life!
Its amazing how delicate are these devices!! I think they are intended for enclosed-temp-controlled-ultraclean places only.
I hope this helps a lot of people having the same problem.
Thanks!
dcgamboa said:
Thanks guys for the suggestions. This seems to be a very common problem. But in my case the solution was simpler than I would ever though!! I read in other posts that this unresponsive touch screen problem is usually created by particles of dust, (sand! in my case), stuck in that tiny gap between the screen cover and the phone body, and the solution was to gently pass a piece of paper thin enough, (flexible plastic CD cover, in my case) well....Having tested all kinds of software """solutions""", and been prepared to pay for an expensive fix (I live in Costa Rica, this kind of phones are not common use, so fixes are expensive)...so I gave I try to this solution...and surprisingly IT WORKED...there were lots of dust, and even sand grains stuck in that gap, and like the phoenix...my phone got back to life!
Its amazing how delicate are these devices!! I think they are intended for enclosed-temp-controlled-ultraclean places only.
I hope this helps a lot of people having the same problem.
Thanks!
Click to expand...
Click to collapse
awesome!!!! good job.
More info needed on "HTC fuze touch screen not working"
Hey, Ive tried following the thread about the htc fuze touch screen not working... up until the part about sand in 'some space between something...'
can someone provde more context/ pics? of where the sand might be.. because it sucks trying to use the fuze without a touch screen.
thanks for the help.
and the HTC customer support immediate went to the "well just hard reset the phone"... how quickly they are willing to erase all that data and hours of work to reconfig the phone..
any help is appreciated...
They were talking about the tiny gap between there the top layer of the screen (the material you touch) comes into contact with the body I believe. What you can try doing is running a piece of paper or something thing enough to wedge out the dirt in that area.
another somewhat common problem is the newton ring. You'll see an oily residue in the center area of your screen (it looks like rainbows). What I believe happens with this is your screen gets stuck to the actually LCD display underneath and doesn't bounce back to go back to it's resting state. What some people have said is to get some sort of adhesive material and use that to pull the screen up gently, so it goes back to resting. People have used tape and the such. Just be careful you don't pull the screen off your device.
If anyone knowledable on anything that pertains to my problem could help me out I would be very grateful..here's the scoop..
I have had my polaris for over a year now (out of warranty) and for the longest time I've had issues with the touch screen not responding correctly and having to re-calibrate it all the time. I finally figured out what the issue was yesterday after I hard reset the device and the screen was still messed up...I had been using a dock for this device that isn't manufactured very well -- using the dock day in day out for a few months at work actually bent the pins on the USB connector on the cruise to the point where some of them were touching each other (yikes!)
So, I gave the phone to my dad who's an engineer, he took it to work and used a microscope or whatever and some tools and got the pins back straight again..now the screen works fine! Needless to say that dock is in the garbage now. The brand was "BoxWave" -- stay away from their products, they are JUNK!
Anyways -- I still have a problem with the scroll wheel.
Spinning the wheel does not work at all -- the Up, Down, and Left buttons work when pressed, and the wheel does light up, but spinning it doesn't do anything. Also the Right button doesn't work either. The button in the middle works okay. All of the working buttons cause the light to go on.
The logical conclusion here to me anyways seems to be that the bent pins caused permanent damage to the scroll wheel...I'm very glad it didn't cause perm. damage to the screen (or anything else, so I hope!!)..but anyways -- what would be the best option for me at this point?
Call HTC and have them fix it and pay out of pocket?
About how much would they charge for something like this (ballpark)?
My dad is a very skilled electrical engineer -- he would be willing to take it apart and fix it for me at work..he's got all the tools and stuff for it and doesn't mind at all...what parts should I look into ordering?
Thanks for any help anyone can provide here.
Hi,
I have a similar problem the up, left, right and turning the wheel does not work on my polaris either and I have not damaged it whatsoever. So, i do not think your button problem is because of a possible short circuit. But, sorry to tell you but I do not have a solution to the problem.
I thought I was certain, but occaisonally my screen still dies.
Perhaps it was permanently damaged? It is much better than before though -- but no matter what I do -- the wheel spinning does nothing, and the Right key does nothing at all.
Do you have any clue what part we would need to get replaced?
I am looking to replace the screen as well due to scratches.
I believe it's called a "digitizer" (the screen part not the wheel)
No, sorry. But if you do find out let me know as well.
Thank you.
found this on ebay
Hi,
Guys I found this on eBay. It says it can repair this kind of issue. Although I do not have the time to test.
So, here it is
http://cgi.ebay.com/HTC-Touch-Cruis...ries?hash=item19b5e3f64f&_trksid=p3286.c0.m14
P.S. if anyone does test this please give us your feedback. Thank you
What?
Did you post the wrong link or something?
That is a SIM card.
This thread is about the scroll wheel \ DPad.
EDIT:
Nvm, I see in the auction it says its a ribbon or something.
I dunno about this one...but it's cheap.
I still have not even gotten around to repairing my screen \ usb port though...god damn money.
If i order this ill let u know.
OK so I just purchased a new charge port and digitizer, but I have yet to see ANYONE selling a replacement scroll wheel.
Alot of people are selling the "housing" but it's missing the wheel!
Anyone know where to get a replacement metal panel and wheel only, not the entire housing?
I found a jog wheel for the shadow -- wonder if it would fit?
I have the same issue, the jog wheel doesn't work and neither the right button, but everything else works & lights up the keypad part....strange that this is 3 of us with the EXACT problem, maybe there's something we need to figure out? btw, i used to hardly use the buttons, but i used the jogwheel a lot to scroll.
I also have the BoxWave dock, however, i've found mine to be of great quality & use...reading your post made me paranoid so I checked my usb connecter over & over but thankfully everything looks very normal.
I came across this post, because I was actually looking for some user advice on replacing your own housing & wheel. I already found the entire housing & keypad on ebay that comes with the screwdriver set, and i have the manual to assemble & dissassemble.
I would rather do it myself so i wouldn't have to do without my phone while waiting for this to get repaired, but i also don't want to do it if it's very tricky with a big chance of busting phone, so i'm looking for a feel of easy-medium-hard. I've already done something similar 3 years ago to my I-Mate Jamin as well as replacing the speaker, so my technical skills are probably around mid-level.
Anyways best of luck, i'll update this post later to tell you how it went (this could be in 2 weeks time from now).
alanazar said:
I have the same issue, the jog wheel doesn't work and neither the right button, but everything else works & lights up the keypad part....strange that this is 3 of us with the EXACT problem, maybe there's something we need to figure out? btw, i used to hardly use the buttons, but i used the jogwheel a lot to scroll.
I also have the BoxWave dock, however, i've found mine to be of great quality & use...reading your post made me paranoid so I checked my usb connecter over & over but thankfully everything looks very normal.
I came across this post, because I was actually looking for some user advice on replacing your own housing & wheel. I already found the entire housing & keypad on ebay that comes with the screwdriver set, and i have the manual to assemble & dissassemble.
I would rather do it myself so i wouldn't have to do without my phone while waiting for this to get repaired, but i also don't want to do it if it's very tricky with a big chance of busting phone, so i'm looking for a feel of easy-medium-hard. I've already done something similar 3 years ago to my I-Mate Jamin as well as replacing the speaker, so my technical skills are probably around mid-level.
Anyways best of luck, i'll update this post later to tell you how it went (this could be in 2 weeks time from now).
Click to expand...
Click to collapse
Housing including the jog wheel and electronics?
I also ordered a usb connector and apparently they sent me one that isn't compatible with the cruise...I think I am just gonna buy a broken one and get the parts from it..they seem to be rare compared to other HTC models!
surgex0 said:
Housing including the jog wheel and electronics?
I also ordered a usb connector and apparently they sent me one that isn't compatible with the cruise...I think I am just gonna buy a broken one and get the parts from it..they seem to be rare compared to other HTC models!
Click to expand...
Click to collapse
wow good luck!
Check out this link:
http://cgi.ebay.com/FULL-HOUSING-FO...wItemQQptZPDA_Accessories?hash=item2551ec66c6
and i also found this for you (is that what came wrong), but you have to make sure it's the 2007 Touch Cruise and see if yours is the POLA100 or POLA200:
http://cgi.ebay.com/ORIGINAL-HTC-TO...wItemQQptZPDA_Accessories?hash=item5883c9282c
http://cgi.ebay.com/HTC-Touch-Cruis...temQQptZPDA_s_Pocket_PC_s?hash=item1c0d5c098c
Hope that helps!
alanazar said:
I have the same issue, the jog wheel doesn't work and neither the right button, but everything else works & lights up the keypad part....strange that this is 3 of us with the EXACT problem, maybe there's something we need to figure out? btw, i used to hardly use the buttons, but i used the jogwheel a lot to scroll.
I also have the BoxWave dock, however, i've found mine to be of great quality & use...reading your post made me paranoid so I checked my usb connecter over & over but thankfully everything looks very normal.
I came across this post, because I was actually looking for some user advice on replacing your own housing & wheel. I already found the entire housing & keypad on ebay that comes with the screwdriver set, and i have the manual to assemble & dissassemble.
I would rather do it myself so i wouldn't have to do without my phone while waiting for this to get repaired, but i also don't want to do it if it's very tricky with a big chance of busting phone, so i'm looking for a feel of easy-medium-hard. I've already done something similar 3 years ago to my I-Mate Jamin as well as replacing the speaker, so my technical skills are probably around mid-level.
Anyways best of luck, i'll update this post later to tell you how it went (this could be in 2 weeks time from now).
Click to expand...
Click to collapse
I had the same problem but on a 2 year warranty Touch Cruise. Phone was fixed and re-installed with WM 6.1
Know I face Bluetooth connection problems again and the BT hotfix is not accepted anymore.
I do have to say that the upgrade after re-installing should have been left behind.
I have the same problem... Scrol wheel not working en button to the right
anyone ever fixed this?
Hey Guys!
I've got the same problem with the wheel and the right button. So I was wondering if anyone fixed the problem?
I have no warranty anymore
I think I know what's your problem, mates.. It seems that it is essential for almost any P3650 - the cable, which is going from the jog wheel to the keyboard control unit tears apart just before (or exactly at) the copper pads on the molex thingie, that plugs into K/B unit (damage is so slight, that it barely can be seen).
I had no luck looking for the jog wheel sold seperately from housing, or at least with that plastic-chromed buttons cover. If anyone finds out that it is possible to obtain it seperately - I would greatly appreciate
Btw, same problem goes for sim holder's cable - I have replaced mine 2 times already (you can get 'em for around 15$ from ebay).
Sorry for my english - it's a bit rusty atm
Same problem here..wheel doesn't function can't find the part by itself ..
Touch Cruise jog wheel & keyboard
Exact same here - jog wheel scrolling broken & right selection does not work. Besides, my "call" key stucks time to time.
So for now I've just got both of them - jog wheel and keyboard (not the entire housing) from ebay, 15 & 7 $ respective
wheel ordered from the following ebay location :
cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rt=nc&nma=true&item=260656153778&si=1E2jM09T8qOM9DzM6uzrXo5Qiqg%253D&viewitem=&sspagename=STRK%3AMEWNX%3AIT
same provider has keyboard also, for some reason it is not on eBay active items. But you can contact the seller and ask for it.
I gonna replace both in a near future, and will update about the result.
Hello.! I have an embarrassing problem with my 13-year-old son's smartphone. He was a satisfied owner of the S7 SM930FM until he went to help his parents in the blanket. Like most "say" teen phones, computers and the internet is something without which life does not make sense. Good concretes. He helped me to repair the car. He places his smartphone in the place where the mask is closed. Sam closes her and forgets about the smartphone. The effect, a broken display (screen crack in several places), strangely everything worked without a problem, with slight lateness, but it worked. Only the spider on the screen disturbed. Telephone after warranty. He was very well looked after. I have a little idea about the replacement of various components in various smartphone models, so I ordered the display and replaced it. The exchange proceeded without any complications, unfortunately after the phone was turned on, the right and left touch keys stopped working. When switching on the phone, the backlighting of these keys is for a moment. I stripped it again to check the tape connection, everything seemed good. I decided to order a tape with touch keys to replace it, it may have damaged during the exchange. I ordered two from two different sellers. I used both of them and unfortunately I still do the same. I put Odin in a clean soft unbranded with the thought that it might be the fault of the software, but it did not help. You can have ideas.