MT3G screen unlock issues? Logs needed. - myTouch 3G, Magic Android Development

Trying to figure this out. Anyone that has had the problem with unlocking the device where the screen blinks horizontal lines and then stays black and have to lock and unlock again. Please let me know and see if you can't upload your log to see if i can't find the problem.

This is a common issue with the MT3G. I have also come across this problem. No one has yet to investigate what is causing it, and i know nothing about how to find out why it is occuring. Just hope that someone figures it out and fixes it in their roms

Try and use the log collector application and see if you can pull the logs off of the device when you see it happen I am looking into it. I have been running a stock rom that just has added root and wifi tether and hasn't dont it so it is a rom issue.

Below is the output of adb logcat pressing the end button and having the screen flicker...i stopped it after the screen actually came back online instead of just flickering.
The screen lock flickering only occurs when device is warm like after talking on the phone for 5 mins
I don't remember this happening on the stock tmo rom pre root
device MT3G
rom: cyan 4.01
recovery rav 1.2
apps on ext3 partition
D/SurfaceFlinger( 137): Screen about to return, flinger = 0x17abc8
D/WindowManager( 137): I'm tired mEndcallBehavior=0x3
D/Sensors ( 137): sensors=00000000, real=00000000
D/SurfaceFlinger( 137): About to give-up screen, flinger = 0x17abc8
D/KeyguardViewMediator( 137): wakeWhenReadyLocked(6)
D/KeyguardViewMediator( 137): Statusbar locked
D/KeyguardViewMediator( 137): handleWakeWhenReady(6)
D/KeyguardViewMediator( 137): pokeWakelock(10000)
D/Sensors ( 137): sensors=00000001, real=00000001
D/SurfaceFlinger( 137): Screen about to return, flinger = 0x17abc8
D/WindowManager( 137): I'm tired mEndcallBehavior=0x3
D/Sensors ( 137): sensors=00000000, real=00000000
D/SurfaceFlinger( 137): About to give-up screen, flinger = 0x17abc8
D/AKMD ( 126): Compass CLOSE
D/KeyguardViewMediator( 137): wakeWhenReadyLocked(6)
D/KeyguardViewMediator( 137): Statusbar locked
D/KeyguardViewMediator( 137): handleWakeWhenReady(6)
D/KeyguardViewMediator( 137): pokeWakelock(10000)
D/Sensors ( 137): sensors=00000001, real=00000001
D/AKMD ( 126): Compass OPEN
W/WindowManager( 137): No focus window, dropping: KeyEvent{action=1 code=6 repe
at=0 meta=0 scancode=107 mFlags=8}
D/SurfaceFlinger( 137): Screen about to return, flinger = 0x17abc8
D/WindowManager( 137): I'm tired mEndcallBehavior=0x3
D/Sensors ( 137): sensors=00000000, real=00000000
D/SurfaceFlinger( 137): About to give-up screen, flinger = 0x17abc8
D/AKMD ( 126): Compass CLOSE
D/KeyguardViewMediator( 137): wakeWhenReadyLocked(6)
D/KeyguardViewMediator( 137): Statusbar locked
D/KeyguardViewMediator( 137): handleWakeWhenReady(6)
D/KeyguardViewMediator( 137): pokeWakelock(10000)
D/Sensors ( 137): sensors=00000001, real=00000001
W/WindowManager( 137): No focus window, dropping: KeyEvent{action=1 code=6 repe
at=0 meta=0 scancode=107 mFlags=8}
D/AKMD ( 126): Compass OPEN
D/SurfaceFlinger( 137): Screen about to return, flinger = 0x17abc8
D/WindowManager( 137): I'm tired mEndcallBehavior=0x3
D/Sensors ( 137): sensors=00000000, real=00000000
D/SurfaceFlinger( 137): About to give-up screen, flinger = 0x17abc8
D/AKMD ( 126): Compass CLOSE
D/KeyguardViewMediator( 137): wakeWhenReadyLocked(6)
D/KeyguardViewMediator( 137): Statusbar locked
D/KeyguardViewMediator( 137): handleWakeWhenReady(6)
D/KeyguardViewMediator( 137): pokeWakelock(10000)
D/Sensors ( 137): sensors=00000001, real=00000001
D/AKMD ( 126): Compass OPEN
D/WindowManager( 137): I'm tired mEndcallBehavior=0x3
D/Sensors ( 137): sensors=00000000, real=00000000
D/KeyguardViewMediator( 137): wakeWhenReadyLocked(6)
D/KeyguardViewMediator( 137): Statusbar locked
D/KeyguardViewMediator( 137): handleWakeWhenReady(6)
D/KeyguardViewMediator( 137): pokeWakelock(10000)
D/Sensors ( 137): sensors=00000001, real=00000001
I/WindowManager( 137): onOrientationChanged, rotation changed to 0
D/SurfaceFlinger( 137): Screen about to return, flinger = 0x17abc8
D/WindowManager( 137): I'm tired mEndcallBehavior=0x3
D/Sensors ( 137): sensors=00000000, real=00000000
D/SurfaceFlinger( 137): About to give-up screen, flinger = 0x17abc8
D/KeyguardViewMediator( 137): wakeWhenReadyLocked(6)
D/KeyguardViewMediator( 137): Statusbar locked
D/KeyguardViewMediator( 137): handleWakeWhenReady(6)
D/KeyguardViewMediator( 137): pokeWakelock(10000)
D/Sensors ( 137): sensors=00000001, real=00000001
D/SurfaceFlinger( 137): Screen about to return, flinger = 0x17abc8
D/AKMD ( 126): Compass CLOSE
D/AKMD ( 126): Compass OPEN

TheArtiszan said:
Trying to figure this out. Anyone that has had the problem with unlocking the device where the screen blinks horizontal lines and then stays black and have to lock and unlock again. Please let me know and see if you can't upload your log to see if i can't find the problem.
Click to expand...
Click to collapse
I am having same problem. it is intermediate. I have not noticed if this happens only when device is warm or something like that.
will try to load factory image and see if it solves problem will use it for a while.
Thanks.

Related

Navigation Speed WM6 Standard Registry

Hey guys,
Just got myself a Q9H and even though I know XDA supports HTC mostly, I hope I can find a solution here. Navigation on the Q9H is terrible. The hold delay for when you press the Dpad to navigate up or down is simply slow. How can I speed this up?
I've checked the registry and find these keys I think could help this be improved. Sadly I have no knowledge if I'm in the right place and what the DWORD data should be for this to improve:
HKCU\ControlPanel\Keybd | DWord: APP5_LongPress = 0xD0 (208)
HKCU\ControlPanel\Keybd | DWord: InitialDelay = 0x3E8 (1000)
HKCU\ControlPanel\Keybd | DWord: RepeatRate = 0xA (10)
HKCU\ControlPanel\Keybd | DWord: RockerInitialDelay = 0x1F4 (500)
HKCU\ControlPanel\Keybd | DWord: RockerMaxRate = 0x19 (25)
HKCU\ControlPanel\Keybd | DWord: RockerMinRate = 0x5 (5)
HKCU\ControlPanel\Keybd | DWord: RockerMode = 0x1 (1)
HKCU\ControlPanel\Keybd | DWord: RockerThreshold = 0x2 (2)
HKCU\ControlPanel\Keybd | DWord: TimeToMaxRate = 0x9C4 (2500)
Could anybody help?
see this
http://www.everythingq.com/forum/moto-q-hacks/moto-q-benchmarks-speed-hack-8703.html

[Q] How to change Display Brightness?

Hello mates,
i want to write an application, which can change the Display brightness like the windows integrated tool with a slider.
Can someone tell me, how this will work? i tried it with SetPowerRequirement(), but i didn't get it to work
Thanks for your help.
MC-Bechtmann
#Basic regkeys to set no timeouts and full brightness
#Read registry settings
BattSuspendTimeout = RegRead ("HKLM", "System\CurrentControlSet\Control\Power\Timeouts","BattSuspendTimeout")
ACSuspendTimeout = RegRead ("HKLM", "System\CurrentControlSet\Control\Power\Timeouts","ACSuspendTimeout")
BatteryTimeout = RegRead ("HKCU", "ControlPanel\Backlight", "BatteryTimeout")
ACTimeout = RegRead ("HKCU", "ControlPanel\Backlight", "ACTimeout")
Brightness = RegRead ("HKCU", "ControlPanel\Backlight", "Brightness")
ACBrightness = RegRead ("HKCU", "ControlPanel\Backlight", "ACBrightness")
#Set registry settings
RegWriteDword ("HKLM", "System\CurrentControlSet\Control\Power\Timeouts","BattSuspendTimeout",0)
RegWriteDword ("HKLM", "System\CurrentControlSet\Control\Power\Timeouts","ACSuspendTimeout",0)
RegWriteDword ("HKCU", "ControlPanel\Backlight", "BatteryTimeout", 0)
RegWriteDword ("HKCU", "ControlPanel\Backlight", "ACTimeout", 0)
RegWriteDword ("HKCU", "ControlPanel\Backlight", "Brightness", 10)
RegWriteDword ("HKCU", "ControlPanel\Backlight", "ACBrightness", 10)
#Set registry settings back to normal use mode
RegWriteDword ("HKLM", "System\CurrentControlSet\Control\Power\Timeouts","BattSuspendTimeout",BattSuspendTimeout)
RegWriteDword ("HKLM", "System\CurrentControlSet\Control\Power\Timeouts","ACSuspendTimeout",ACSuspendTimeout)
RegWriteDword ("HKCU", "ControlPanel\Backlight", "BatteryTimeout", BatteryTimeout)
RegWriteDword ("HKCU", "ControlPanel\Backlight", "ACTimeout", ACTimeout)
RegWriteDword ("HKCU", "ControlPanel\Backlight", "Brightness", Brightness)
RegWriteDword ("HKCU", "ControlPanel\Backlight", "ACBrightness", ACBrightness)
Thanks for your reply.
Are the RegRead and RegWriteDword normal API functions? I can't use them in my Visual Studio MFC project.
I wrote this settings with another function to the registry, but what shall i do after that? Nothing happens after writing to registry?
do i have to set and event or something else?
Sorry, I just used something similiar in flash, have no idea how to do it in Visual Studio...
:/

[GUIDE] Proper Shutdown - Emulating long press power button

Hi
So you want to emulate the native android shutdown sequence. Broken power button? Car or fixed Nexus 7 installation? TV Stick? Here is the solution! (I advise you not to use one of the many shutdown apps because they shutdown without unmounting filesystem etc. and thus can damage your filesystem in the long run).
This should work on ANY Android device!
You can do it directly on your device, no adb needed. BUT: You have to be rooted!
How to:
1. Install Bash X from playstore (I'm not affiliated with them)
2. Start it and choose #root shell
3. Type: getevent -c 3
4. Push power button and release it (short, without the boot dialog)
5. Now you see something like this:
# getevent -c 3
add device 1: /dev/input/event0
name: "pmic8xxx_pwrkey"
add device 2: /dev/input/event1
name: "gk-keypad-8064"
add device 3: /dev/input/event4
name: "hs_detect"
add device 4: /dev/input/event3
name: "suspend_autotest_pwrkey"
could not get driver version for /dev/input/mice, Not a typewriter
add device 5: /dev/input/event2
name: "touch_mxt1188S"
/dev/input/event0: 0001 0074 00000001
/dev/input/event0: 0000 0000 00000000
/dev/input/event0: 0001 0074 00000000
#
add device output shows you the event numbers off your input devices. On my LG Pad the power key is assigned to /dev/input/event0. On your device it will be a other eventX number. On my Nexus 7 it is event2 (gpio).
Now we convert the hex strings of the events in dec (google a online converter). The last 3 lines then look like this:
/dev/input/event0: 1 116 1
/dev/input/event0: 0 0 0
/dev/input/event0: 1 116 0
1 116 1 means power key down
1 116 0 means power key release
6. Install Tasker. Set up a new profile with the profile you want to be the trigger for your action (shutdown). Under tasks choose script, start shell and paste our new script:
/dev/input/event0: 1 116 1;
/dev/input/event0: 0 0 0;
sleep 1;
/dev/input/event0: 1 116 0;
Now we need only some dpad keys for going down and right in the menu:
input keyevent 20;
input keyevent 66;
input keyevent 22;
input keyevent 66;
(Where 20 is down, 22 is right and 66 is enter. This works on stock and CM10)
The Tasker action finally looks like this:
/dev/input/event0: 1 116 1;
/dev/input/event0: 0 0 0;
/dev/input/event0: 1 116 0;
input keyevent 20;
input keyevent 66;
input keyevent 22;
input keyevent 66;
exit;
Don't forget to check "use root" in your action. Test it out!
Cool it is
I also thank the many people working on this question on other places.
edit: if you experience no proper shutdown (have to press 15sec power button for boot), its because tasker hangs on shutdown. Export a app from tasker and start it with automateit. Weird but it works
Olivier

[Q] Random reboots; help decoding kmesg?

My Photon Q keeps freezing up. I'm told that the contents of last_kmesg are helpful, but I can't make head or tail of it. Can anyone help.
This is the file from right after it froze (blank screen, unresponsive) and I rebooted by holding down the power key.
[22875.181105,1]
[22875.212663,1] panel_disable is called
[22875.352538,1] panel_disable completed
[22875.373536,1] dtv_pipe/hdmi as primary are not configured yet
[22875.373932,1] atmxt_set_ic_state: IC state ACTIVE -> SLEEP
[22875.924703,0] CPU1: shutdown
[22897.625817,0] Report pwrkey press event
[22897.627343,0] request_suspend_state: wakeup (3->0) at 7131074858248 (2014-10-28 17:58:45.038075094 UTC)
[22897.627923,0] atmxt_set_ic_state: IC state SLEEP -> ACTIVE
[22897.655483,0] atmxt_message_handler6: Touch IC is calibrating.
[22897.665005,0] atmxt_message_handler6: Touch IC calibration complete.
[22897.714876,0] panel_enable is called
[22897.746891,0] Report pwrkey release event
[22897.848799,0] panel_enable completed. Power_mode =0x98
[22897.873551,0] MIPI MOT Panel is ON
[22897.873704,0] [WLAN][24833:E :HDD] hdd_conf_hostarpoffload:
[22897.873704,0]
[22897.894183,1] CPU1: Booted secondary processor
[22897.900226,0] lm3532_early_resume: enabling PWM
[22897.900684,0] lm3532_early_resume: resumed
[22897.969171,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -66
[22897.969171,0]
[22899.044709,0] CPU1: shutdown
[22900.981257,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -54
[22900.981288,0]
[22901.113411,1] CPU1: Booted secondary processor
[22902.324398,0] CPU1: shutdown
[22902.968805,1] CPU1: Booted secondary processor
[22904.001309,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -63
[22904.001309,0]
[22904.875840,0] CPU1: shutdown
[22907.016081,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -57
[22907.016112,0]
[22907.980494,1] CPU1: Booted secondary processor
[22909.435309,0] CPU1: shutdown
[22909.508253,1] CPU1: Booted secondary processor
[22910.028716,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -50
[22910.028716,0]
[22912.734164,0] CPU1: shutdown
[22913.040131,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -49
[22913.040131,0]
[22913.084386,1] CPU1: Booted secondary processor
[22914.134500,0] CPU1: shutdown
[22914.334409,1] CPU1: Booted secondary processor
[22915.885179,0] CPU1: shutdown
[22916.046388,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -42
[22916.046418,0]
[22919.062594,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -43
[22919.062594,0]
[22920.414708,1] CPU1: Booted secondary processor
[22921.215898,0] CPU1: shutdown
[22921.386690,1] CPU1: Booted secondary processor
[22922.025481,0] CPU1: shutdown
[22922.080113,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -43
[22922.080143,0]
[22922.103797,1] CPU1: Booted secondary processor
[22922.726046,0] CPU1: shutdown
[22925.108558,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -52
[22925.108558,0]
[22928.124459,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -49
[22928.124489,0]
[22929.048219,1] CPU1: Booted secondary processor
[22931.141337,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -48
[22931.141337,0]
[22932.324123,0] CPU1: shutdown
[22932.574238,1] CPU1: Booted secondary processor
[22934.147105,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -46
[22934.147105,0]
[22934.959588,1] select 4651 (d.elixir.widget), adj 9, size 7307, to kill
[22934.959588,1] select 4930 (orola.messaging), adj 9, size 7702, to kill
[22934.959588,1] select 21393 (d.apps.uploader), adj 11, size 7110, to kill
[22934.959618,1] select 21430 (.android.chrome), adj 11, size 7156, to kill
[22934.959618,1] select 23413 (le.android.keep), adj 12, size 7401, to kill
[22934.959649,1] select 25728 (earchbox:search), adj 12, size 7698, to kill
[22934.959649,1] send sigkill to 25728 (earchbox:search), adj 12, size 7698
[22935.162609,1] select 4651 (d.elixir.widget), adj 9, size 7307, to kill
[22935.162762,1] select 4930 (orola.messaging), adj 9, size 7702, to kill
[22935.162884,1] select 21393 (d.apps.uploader), adj 11, size 7110, to kill
[22935.162945,1] select 21430 (.android.chrome), adj 11, size 7156, to kill
[22935.163098,1] select 23413 (le.android.keep), adj 12, size 7401, to kill
[22935.163189,1] send sigkill to 23413 (le.android.keep), adj 12, size 7401
[22935.826336,1] select 4651 (d.elixir.widget), adj 9, size 7307, to kill
[22935.826458,1] select 4930 (orola.messaging), adj 9, size 7702, to kill
[22935.826550,1] select 21393 (d.apps.uploader), adj 11, size 7110, to kill
[22935.826672,1] select 21430 (.android.chrome), adj 11, size 7156, to kill
[22935.826733,1] select 23430 (ndroid.calendar), adj 12, size 6882, to kill
[22935.826885,1] send sigkill to 23430 (ndroid.calendar), adj 12, size 6882
[22936.465524,1] select 4651 (d.elixir.widget), adj 9, size 7307, to kill
[22936.465982,1] select 4930 (orola.messaging), adj 9, size 7702, to kill
[22936.466409,1] select 21393 (d.apps.uploader), adj 11, size 7110, to kill
[22936.466653,1] select 21430 (.android.chrome), adj 11, size 7156, to kill
[22936.467081,1] select 24303 (oid.apps.unveil), adj 11, size 7475, to kill
[22936.467355,1] send sigkill to 24303 (oid.apps.unveil), adj 11, size 7475
[22936.580830,1] select 4651 (d.elixir.widget), adj 9, size 7307, to kill
[22936.581257,1] select 4930 (orola.messaging), adj 9, size 7702, to kill
[22936.581501,1] select 21393 (d.apps.uploader), adj 11, size 7110, to kill
[22936.581929,1] select 21430 (.android.chrome), adj 11, size 7156, to kill
[22936.582203,1] send sigkill to 21430 (.android.chrome), adj 11, size 7156
[22937.156414,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -47
[22937.156414,0]
[22937.413304,1] select 4651 (d.elixir.widget), adj 9, size 7307, to kill
[22937.413395,1] select 4930 (orola.messaging), adj 9, size 7702, to kill
[22937.413548,1] select 21393 (d.apps.uploader), adj 11, size 7110, to kill
[22937.413670,1] send sigkill to 21393 (d.apps.uploader), adj 11, size 7110
[22938.740207,1] select 4651 (d.elixir.widget), adj 9, size 7307, to kill
[22938.740207,1] select 4930 (orola.messaging), adj 9, size 7702, to kill
[22938.740238,1] select 21578 (id.partnersetup), adj 11, size 6445, to kill
[22938.740268,1] select 24286 (com.khl.kiosk), adj 11, size 6485, to kill
[22938.740299,1] send sigkill to 24286 (com.khl.kiosk), adj 11, size 6485
[22938.807322,1] select 4651 (d.elixir.widget), adj 9, size 7306, to kill
[22938.807413,1] select 4930 (orola.messaging), adj 9, size 7701, to kill
[22938.807535,1] select 21578 (id.partnersetup), adj 11, size 6444, to kill
[22938.807688,1] send sigkill to 21578 (id.partnersetup), adj 11, size 6444
[22939.665707,0] CPU1: shutdown
[22940.161022,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -47
[22940.161022,0]
[22940.224444,1] CPU1: Booted secondary processor
[22940.424627,0] CPU1: shutdown
[22943.173536,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -47
[22943.173566,0]
[22944.466684,1] CPU1: Booted secondary processor
[22945.614280,0] CPU1: shutdown
[22946.191787,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -46
[22946.191817,0]
[22946.256551,1] CPU1: Booted secondary processor
[22947.304987,0] CPU1: shutdown
[22947.806162,1] CPU1: Booted secondary processor
[22948.864578,0] CPU1: shutdown
[22949.211472,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -44
[22949.211472,0]
[22951.653133,1] CPU1: Booted secondary processor
[22952.223406,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -43
[22952.223406,0]
[22952.944816,0] CPU1: shutdown
[22955.238025,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -49
[22955.238056,0]
[22958.255666,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -49
[22958.255666,0]
[22961.269248,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -48
[22961.269278,0]
[22962.509687,1] CPU1: Booted secondary processor
[22963.815410,0] CPU1: shutdown
[22964.284996,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -48
[22964.285027,0]
[22964.583241,1] CPU1: Booted secondary processor
[22965.975489,0] CPU1: shutdown
[22966.591451,1] CPU1: Booted secondary processor
[22967.298822,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[22967.298822,0]
[22967.945610,0] CPU1: shutdown
[22970.321956,1] CPU1: Booted secondary processor
[22970.325252,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[22970.325283,0]
[22971.524550,0] CPU1: shutdown
[22973.338681,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -46
[22973.338712,0]
[22973.960137,1] CPU1: Booted secondary processor
[22975.355468,0] CPU1: shutdown
[22976.360748,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[22976.360748,0]
[22979.377870,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[22979.377900,0]
[22982.394839,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[22982.394869,0]
[22983.711030,1] CPU1: Booted secondary processor
[22984.615532,0] CPU1: shutdown
[22985.069583,1] CPU1: Booted secondary processor
[22985.412968,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[22985.412998,0]
[22985.676603,0] CPU1: shutdown
[22986.517653,1] CPU1: Booted secondary processor
[22987.665555,0] CPU1: shutdown
[22988.424810,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[22988.424840,0]
[22988.505109,1] CPU1: Booted secondary processor
[22989.915394,0] CPU1: shutdown
[22990.237995,1] CPU1: Booted secondary processor
[22991.135507,0] CPU1: shutdown
[22991.444129,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[22991.444160,0]
[22993.784706,1] CPU1: Booted secondary processor
[22994.457833,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -46
[22994.457863,0]
[22994.945365,0] CPU1: shutdown
[22996.750096,1] CPU1: Booted secondary processor
[22997.466501,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -46
[22997.466501,0]
[22997.898364,0] CPU1: shutdown
[22998.094335,1] CPU1: Booted secondary processor
[22998.545426,0] CPU1: shutdown
[22999.545701,1] CPU1: Booted secondary processor
[23000.477305,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -46
[23000.477305,0]
[23003.488079,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[23003.488079,0]
[23006.004789,0] CPU1: shutdown
[23006.252950,1] CPU1: Booted secondary processor
[23006.498211,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[23006.498211,0]
[23006.954888,0] CPU1: shutdown
[23007.116646,1] CPU1: Booted secondary processor
[23008.555925,0] CPU1: shutdown
[23009.509809,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[23009.509809,0]
[23011.585042,1] CPU1: Booted secondary processor
[23012.435370,0] CPU1: shutdown
[23012.518263,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[23012.518263,0]
[23015.531997,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -43
[23015.531997,0]
[23016.938163,1] CPU1: Booted secondary processor
[23017.746098,0] CPU1: shutdown
[23018.551439,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -44
[23018.551439,0]
[23019.653163,1] CPU1: Booted secondary processor
[23020.304926,0] CPU1: shutdown
[23021.571063,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[23021.571063,0]
[23024.591176,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -41
[23024.591207,0]
[23027.607841,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -33
[23027.607871,0]
[23030.623284,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -46
[23030.623314,0]
[23031.558001,1] CPU1: Booted secondary processor
[23032.019927,0] select 4651 (d.elixir.widget), adj 9, size 7300, to kill
[23032.020049,0] select 4930 (orola.messaging), adj 10, size 7708, to kill
[23032.020140,0] select 21719 (isfeng.greenify), adj 10, size 8207, to kill
[23032.020262,0] select 24123 (roidtweaker.two), adj 11, size 7273, to kill
[23032.020354,0] select 24266 (d.process.media), adj 11, size 9385, to kill
[23032.020476,0] send sigkill to 24266 (d.process.media), adj 11, size 9385
[23033.637567,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -44
[23033.637567,0]
[23034.655666,0] CPU1: shutdown
[23036.394442,1] CPU1: Booted secondary processor
[23036.647883,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -46
[23036.647883,0]
[23036.794686,0] CPU1: shutdown
[23039.659664,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -55
[23039.659695,0]
[23042.678587,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -57
[23042.678587,0]
[23044.853011,1] CPU1: Booted secondary processor
[23045.065005,0] pm8xxx_irq_mask_ack: mask acking rouge irq=664 pmirq=224
[23045.148173,0] pm8xxx_irq_mask_ack: mask acking rouge irq=664 pmirq=224
[23045.690948,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -56
[23045.690948,0]
[23047.462014,1] select 4651 (d.elixir.widget), adj 9, size 7290, to kill
[23047.462167,1] select 4930 (orola.messaging), adj 10, size 7692, to kill
[23047.462228,1] select 21719 (isfeng.greenify), adj 10, size 8079, to kill
[23047.462380,1] select 24123 (roidtweaker.two), adj 11, size 7198, to kill
[23047.462441,1] send sigkill to 24123 (roidtweaker.two), adj 11, size 7198
[23047.562609,1] select 4651 (d.elixir.widget), adj 9, size 7290, to kill
[23047.562762,1] select 4930 (orola.messaging), adj 10, size 7692, to kill
[23047.562823,1] select 21719 (isfeng.greenify), adj 10, size 8079, to kill
[23047.562976,1] send sigkill to 21719 (isfeng.greenify), adj 10, size 8079
[23048.696807,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -56
[23048.696807,0]
[23051.454109,0] CPU1: shutdown
[23051.717012,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -57
[23051.717012,0]
[23051.754277,1] CPU1: Booted secondary processor
[23052.133768,1] select 4651 (d.elixir.widget), adj 9, size 7290, to kill
[23052.133890,1] select 4930 (orola.messaging), adj 10, size 7692, to kill
[23052.133981,1] send sigkill to 4930 (orola.messaging), adj 10, size 7692
[23054.732821,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -48
[23054.732821,0]
[23055.875718,1] select 4651 (d.elixir.widget), adj 9, size 7311, to kill
[23055.875809,1] select 21257 (com.painless.pc), adj 9, size 7459, to kill
[23055.875931,1] select 23878 (tpass.lpandroid), adj 10, size 6868, to kill
[23055.876023,1] select 25908 (onlabs.v3client), adj 10, size 6969, to kill
[23055.876145,1] select 26063 (droid.gsf.login), adj 10, size 7177, to kill
[23055.876298,1] send sigkill to 26063 (droid.gsf.login), adj 10, size 7177
[23056.003720,1] select 4651 (d.elixir.widget), adj 9, size 7311, to kill
[23056.003842,1] select 21257 (com.painless.pc), adj 9, size 7459, to kill
[23056.003934,1] select 23878 (tpass.lpandroid), adj 10, size 6868, to kill
[23056.004056,1] select 25908 (onlabs.v3client), adj 10, size 6969, to kill
[23056.004148,1] send sigkill to 25908 (onlabs.v3client), adj 10, size 6969
[23057.544572,1] select 4651 (d.elixir.widget), adj 9, size 7311, to kill
[23057.544694,1] select 21257 (com.painless.pc), adj 9, size 7459, to kill
[23057.544755,1] select 23878 (tpass.lpandroid), adj 10, size 6868, to kill
[23057.544908,1] send sigkill to 23878 (tpass.lpandroid), adj 10, size 6868
[23057.748662,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[23057.748692,0]
[23058.115333,1] select 4651 (d.elixir.widget), adj 9, size 7311, to kill
[23058.115516,1] select 21257 (com.painless.pc), adj 9, size 7459, to kill
[23058.115638,1] send sigkill to 21257 (com.painless.pc), adj 9, size 7459
[23058.264883,1] select 4651 (d.elixir.widget), adj 9, size 7311, to kill
[23058.265005,1] send sigkill to 4651 (d.elixir.widget), adj 9, size 7311
[23059.371063,1] select 25945 (.android.elixir), adj 9, size 6803, to kill
[23059.371247,1] send sigkill to 25945 (.android.elixir), adj 9, size 6803
[23059.926321,1] select 25983 (ainfire.supersu), adj 9, size 6737, to kill
[23059.926473,1] send sigkill to 25983 (ainfire.supersu), adj 9, size 6737
[23060.753240,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -53
[23060.753240,0]
[23061.223742,1] select 1470 (gle.android.gms), adj 5, size 11204, to kill
[23061.223833,1] select 1498 (d.process.acore), adj 6, size 10584, to kill
[23061.223894,1] select 1750 (id.gms.wearable), adj 8, size 7018, to kill
[23061.224047,1] select 23454 (a.podcastaddict), adj 8, size 9917, to kill
[23061.224138,1] send sigkill to 23454 (a.podcastaddict), adj 8, size 9917
[23063.763464,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -54
[23063.763494,0]
[23066.773078,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -53
[23066.773078,0]
[23069.605155,0] CPU1: shutdown
[23069.746617,1] CPU1: Booted secondary processor
[23069.783058,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -52
[23069.783089,0]
[23072.793038,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -59
[23072.793069,0]
[23075.799783,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -60
[23075.799783,0]
[23076.056368,0] CPU1: shutdown
[23076.956505,1] CPU1: Booted secondary processor
[23078.224749,0] CPU1: shutdown
[23078.810587,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -57
[23078.810587,0]
[23079.394228,1] CPU1: Booted secondary processor
[23079.685759,0] CPU1: shutdown
[23080.129922,0] pm8xxx_irq_mask_ack: mask acking rouge irq=664 pmirq=224
[23080.146128,1] CPU1: Booted secondary processor
[23081.365326,0] pm8xxx_irq_mask_ack: mask acking rouge irq=664 pmirq=224
[23081.823589,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -57
[23081.823589,0]
[23081.916005,0] CPU1: shutdown
[23082.414494,1] CPU1: Booted secondary processor
[23084.928671,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -59
[23084.928671,0]
[23087.939078,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -55
[23087.939078,0]
[23090.865585,0] CPU1: shutdown
[23090.950218,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -55
[23090.950218,0]
[23091.748723,1] CPU1: Booted secondary processor
[23093.960870,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -55
[23093.960870,0]
[23096.765661,0] CPU1: shutdown
[23096.971491,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -54
[23096.971491,0]
[23097.964318,1] CPU1: Booted secondary processor
[23098.415745,0] CPU1: shutdown
[23099.564410,1] CPU1: Booted secondary processor
[23099.982478,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -57
[23099.982478,0]
[23100.215074,0] CPU1: shutdown
[23101.214433,1] CPU1: Booted secondary processor
[23101.915211,0] CPU1: shutdown
[23102.964502,1] CPU1: Booted secondary processor
[23102.996884,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -62
[23102.996884,0]
[23103.364685,0] CPU1: shutdown
[23105.714631,1] CPU1: Booted secondary processor
[23105.923910,0] CPU1: shutdown
[23106.007383,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -55
[23106.007383,0]
[23107.964502,1] CPU1: Booted secondary processor
[23108.415318,0] CPU1: shutdown
[23109.016997,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -58
[23109.016997,0]
[23109.714387,1] CPU1: Booted secondary processor
[23109.915181,0] CPU1: shutdown
[23112.028442,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -61
[23112.028472,0]
[23112.670468,0] [0:24115:E AT] Set DXE Power state 0
[23112.964318,1] CPU1: Booted secondary processor
[23113.043031,0] [0:24115:E AT] Set DXE Power state 2
[23113.051363,0] [WLAN][24116:E :TL ] WLAN TL:No station registered with TL at this point
[23115.037262,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -60
[23115.037262,0]
[23116.414311,0] CPU1: shutdown
[23116.564410,1] CPU1: Booted secondary processor
[23116.765265,0] CPU1: shutdown
[23117.964380,1] CPU1: Booted secondary processor
[23118.047609,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -59
[23118.047609,0]
[23119.115638,0] CPU1: shutdown
[23121.061129,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -57
[23121.061129,0]
[23122.964502,1] CPU1: Booted secondary processor
[23123.915394,0] CPU1: shutdown
[23124.071842,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -51
[23124.071842,0]
[23127.083287,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -50
[23127.083287,0]
[23127.964318,1] CPU1: Booted secondary processor
[23128.516981,0] CPU1: shutdown
[23130.093633,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -51
[23130.093664,0]
[23130.329495,0] request_suspend_state: sleep (0->3) at 7363777009922 (2014-10-28 18:02:37.740226768 UTC)
[23130.389925,0] Normal Zone Compacted.
[23130.390078,0] lm3532_early_suspend: suspended
[23130.390993,0] MDP: unknown ioctl (cmd=40046da0) received!
[23130.397799,0] [WLAN][23200:E :HDD] hdd_conf_hostarpoffload:
[23130.397799,0]
[23130.398013,0] [WLAN][23200:E :HDD] hdd_conf_hostarpoffload: Enabled
[23130.398013,0]
[23130.422673,0] panel_disable is called
[23130.484416,1] CPU1: Booted secondary processor
[23130.562518,0] panel_disable completed
[23130.583729,0] dtv_pipe/hdmi as primary are not configured yet
[23130.584248,0] atmxt_set_ic_state: IC state ACTIVE -> SLEEP
[23131.294213,1] alarm_release: clear alarm, pending 0
[23131.294305,1] alarm_release: clear alarm, pending 0
[23131.294457,1] alarm_release: clear alarm, pending 0
[23131.294518,1] alarm_release: clear alarm, pending 0
[23131.334622,0] CPU1: shutdown
[23131.648066,0] request_suspend_state: wakeup (3->0) at 7365095581558 (2014-10-28 18:02:39.058798404 UTC)
[23131.648524,0] atmxt_set_ic_state: IC state SLEEP -> ACTIVE
[23131.650539,0] init: untracked pid 341 exited
[23131.664456,0] atmxt_message_handler6: Touch IC is calibrating.
[23131.693633,0] atmxt_message_handler6: Touch IC calibration complete.
[23131.729922,0] panel_enable is called
[23131.834302,1] CPU1: Booted secondary processor
[23131.857650,0] panel_enable completed. Power_mode =0x98
[23131.859756,0] init: untracked pid 25968 exited
[23131.880632,0] init: untracked pid 1430 exited
[23131.891863,0] MIPI MOT Panel is ON
[23131.892016,0] [WLAN][25401:E :HDD] hdd_conf_hostarpoffload:
[23131.892016,0]
[23131.946891,0] lm3532_early_resume: enabling PWM
[23131.947410,0] lm3532_early_resume: resumed
[23131.992702,0] init: untracked pid 1064 exited
[23131.992947,0] init: untracked pid 27130 exited
[23131.993130,0] init: untracked pid 1083 exited
[23131.994259,0] init: untracked pid 26768 exited
[23132.004239,0] init: untracked pid 1057 exited
[23132.006192,0] init: untracked pid 347 exited
[23132.194106,0] acdb_mmap: PMEM is not allocated, yet!
[23132.196456,0] init: untracked pid 1750 exited
[23132.206803,0] init: untracked pid 26862 exited
[23132.516707,1] init: untracked pid 1470 exited
[23132.885484,0] CPU1: shutdown
[23135.750218,0] Report pwrkey press event
[23135.889727,0] Report pwrkey release event
[23136.793099,0] Report pwrkey press event
[23143.793465,0] Power key held for 7 seconds; will reboot on release.
[23144.616539,0] Power key released; REBOOTING.
[23144.616630,0] Going down for restart now

Need help with MXQ Pro remote.conf

Hi!
I just got my MXQ Pro S905 android tv box and right out the box, the remote control didn't work. I googled and visited different website and I found a remote.conf file to replace the current one on the box, so I did. Now the remote partially works. I can use the arrows, volume up down, etc... The problem is I still can't get the power button or the mouse to work Any expert help on how to get it to work please?
Here is the new remote.conf file that partially works ( power button and mouse don't work):
#************************************************* ************************************************** ******
#this file is configuration for each factory remote device
# work_mode 0 :software mode 1 :hardware mode
# repeat_enable 0 :disable repeat 1 :enable repeat
#
# factory_code each device has it's unique factory code.
# pattern:custom_code(16bit)+index_code(16bit)
# examble: 0xff000001 = 0xff00(custom cod) 0001 (index)
#
# release_delay unit:ms.release will report from kernel to user layer after this period of time
# from press or repeat triggered.
#
# debug_enable 0 :debug disable 1 :debug disable
#
# SW MODE:
# bit_count how many bits in each frame
# tw_leader_act time window for leader active
# tw_bit0 time window for bit0 time.
# tw_bit1 time window for bit1 time
# tw_repeat_leader time window for repeat leader
# REG
# reg_base_gen set value for PREG_IR_DEC_BASE_GEN
# reg_control set value for PREG_IR_DEC_CONTROL
# reg_leader_act set value for PREG_IR_DEC_LEADER_ACTIVE
# reg_leader_idle set value for PREG_IR_DEC_LEADER_IDLE
# reg_repeat_leader set value for PREG_IR_DEC_REPEAT_IDLE
# reg_bit0_time set value for PREG_IR_DEC_BIT0_TIME
#************************************************* ************************************************** **********
#amlogic NEC remote
factory_code = 0x7f800001
work_mode = 0
repeat_enable = 1
repeat_delay = 40
repeat_peroid = 39
release_delay = 121
debug_enable = 1
fn_key_scancode = 0x15
left_key_scancode = 0x1c
right_key_scancode = 0x48
up_key_scancode = 0x44
down_key_scancode = 0x1d
ok_key_scancode = 0x5c
pageup_key_scancode = 0x04
pagedown_key_scancode = 0x1b
mouse_begin
0 0x1c
1 0x48
2 0x44
3 0x1d
mouse_end
key_begin
0x4d 113
0x56 114
0x4e 115
0x25 105
0x26 103
0x27 106
0x28 108
0x0d 97
0x1b 158
0x53 102
0x51 704
0x49 139
0x52 388
0x31 2
0x32 3
0x33 4
0x34 5
0x35 6
0x36 7
0x37 8
0x38 9
0x39 10
0x30 11
0x58 389
0x44 14
0xbd 122
0xbb 123
0x09 393
0x11 390
0x54 391
0x4f 392
key_end
repeat_key_begin
0x4d 113
0x56 114
0x4e 115
0x25 105
0x26 103
0x27 106
0x28 108
0x0d 28
0x1b 158
0x53 102
0x51 704
0x49 139
0x52 388
0x31 2
0x32 3
0x33 4
0x34 5
0x35 6
0x36 7
0x37 8
0x38 9
0x39 10
0x30 11
0x58 389
0x44 111
0xbd 122
0xbb 123
0x09 164
0x11 390
0x54 391
0x4f 392
repeat_key_end
try a reflash
guide here
http://forum.xda-developers.com/showthread.php?t=3400814
Sent from my SM-G920F using XDA-Developers mobile app

Categories

Resources