Database Info

[Q] Random reboots; help decoding kmesg? - General Questions and Answers

My Photon Q keeps freezing up. I'm told that the contents of last_kmesg are helpful, but I can't make head or tail of it. Can anyone help.
This is the file from right after it froze (blank screen, unresponsive) and I rebooted by holding down the power key.
[22875.181105,1]
[22875.212663,1] panel_disable is called
[22875.352538,1] panel_disable completed
[22875.373536,1] dtv_pipe/hdmi as primary are not configured yet
[22875.373932,1] atmxt_set_ic_state: IC state ACTIVE -> SLEEP
[22875.924703,0] CPU1: shutdown
[22897.625817,0] Report pwrkey press event
[22897.627343,0] request_suspend_state: wakeup (3->0) at 7131074858248 (2014-10-28 17:58:45.038075094 UTC)
[22897.627923,0] atmxt_set_ic_state: IC state SLEEP -> ACTIVE
[22897.655483,0] atmxt_message_handler6: Touch IC is calibrating.
[22897.665005,0] atmxt_message_handler6: Touch IC calibration complete.
[22897.714876,0] panel_enable is called
[22897.746891,0] Report pwrkey release event
[22897.848799,0] panel_enable completed. Power_mode =0x98
[22897.873551,0] MIPI MOT Panel is ON
[22897.873704,0] [WLAN][24833:E :HDD] hdd_conf_hostarpoffload:
[22897.873704,0]
[22897.894183,1] CPU1: Booted secondary processor
[22897.900226,0] lm3532_early_resume: enabling PWM
[22897.900684,0] lm3532_early_resume: resumed
[22897.969171,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -66
[22897.969171,0]
[22899.044709,0] CPU1: shutdown
[22900.981257,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -54
[22900.981288,0]
[22901.113411,1] CPU1: Booted secondary processor
[22902.324398,0] CPU1: shutdown
[22902.968805,1] CPU1: Booted secondary processor
[22904.001309,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -63
[22904.001309,0]
[22904.875840,0] CPU1: shutdown
[22907.016081,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -57
[22907.016112,0]
[22907.980494,1] CPU1: Booted secondary processor
[22909.435309,0] CPU1: shutdown
[22909.508253,1] CPU1: Booted secondary processor
[22910.028716,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -50
[22910.028716,0]
[22912.734164,0] CPU1: shutdown
[22913.040131,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -49
[22913.040131,0]
[22913.084386,1] CPU1: Booted secondary processor
[22914.134500,0] CPU1: shutdown
[22914.334409,1] CPU1: Booted secondary processor
[22915.885179,0] CPU1: shutdown
[22916.046388,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -42
[22916.046418,0]
[22919.062594,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -43
[22919.062594,0]
[22920.414708,1] CPU1: Booted secondary processor
[22921.215898,0] CPU1: shutdown
[22921.386690,1] CPU1: Booted secondary processor
[22922.025481,0] CPU1: shutdown
[22922.080113,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -43
[22922.080143,0]
[22922.103797,1] CPU1: Booted secondary processor
[22922.726046,0] CPU1: shutdown
[22925.108558,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -52
[22925.108558,0]
[22928.124459,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -49
[22928.124489,0]
[22929.048219,1] CPU1: Booted secondary processor
[22931.141337,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -48
[22931.141337,0]
[22932.324123,0] CPU1: shutdown
[22932.574238,1] CPU1: Booted secondary processor
[22934.147105,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -46
[22934.147105,0]
[22934.959588,1] select 4651 (d.elixir.widget), adj 9, size 7307, to kill
[22934.959588,1] select 4930 (orola.messaging), adj 9, size 7702, to kill
[22934.959588,1] select 21393 (d.apps.uploader), adj 11, size 7110, to kill
[22934.959618,1] select 21430 (.android.chrome), adj 11, size 7156, to kill
[22934.959618,1] select 23413 (le.android.keep), adj 12, size 7401, to kill
[22934.959649,1] select 25728 (earchbox:search), adj 12, size 7698, to kill
[22934.959649,1] send sigkill to 25728 (earchbox:search), adj 12, size 7698
[22935.162609,1] select 4651 (d.elixir.widget), adj 9, size 7307, to kill
[22935.162762,1] select 4930 (orola.messaging), adj 9, size 7702, to kill
[22935.162884,1] select 21393 (d.apps.uploader), adj 11, size 7110, to kill
[22935.162945,1] select 21430 (.android.chrome), adj 11, size 7156, to kill
[22935.163098,1] select 23413 (le.android.keep), adj 12, size 7401, to kill
[22935.163189,1] send sigkill to 23413 (le.android.keep), adj 12, size 7401
[22935.826336,1] select 4651 (d.elixir.widget), adj 9, size 7307, to kill
[22935.826458,1] select 4930 (orola.messaging), adj 9, size 7702, to kill
[22935.826550,1] select 21393 (d.apps.uploader), adj 11, size 7110, to kill
[22935.826672,1] select 21430 (.android.chrome), adj 11, size 7156, to kill
[22935.826733,1] select 23430 (ndroid.calendar), adj 12, size 6882, to kill
[22935.826885,1] send sigkill to 23430 (ndroid.calendar), adj 12, size 6882
[22936.465524,1] select 4651 (d.elixir.widget), adj 9, size 7307, to kill
[22936.465982,1] select 4930 (orola.messaging), adj 9, size 7702, to kill
[22936.466409,1] select 21393 (d.apps.uploader), adj 11, size 7110, to kill
[22936.466653,1] select 21430 (.android.chrome), adj 11, size 7156, to kill
[22936.467081,1] select 24303 (oid.apps.unveil), adj 11, size 7475, to kill
[22936.467355,1] send sigkill to 24303 (oid.apps.unveil), adj 11, size 7475
[22936.580830,1] select 4651 (d.elixir.widget), adj 9, size 7307, to kill
[22936.581257,1] select 4930 (orola.messaging), adj 9, size 7702, to kill
[22936.581501,1] select 21393 (d.apps.uploader), adj 11, size 7110, to kill
[22936.581929,1] select 21430 (.android.chrome), adj 11, size 7156, to kill
[22936.582203,1] send sigkill to 21430 (.android.chrome), adj 11, size 7156
[22937.156414,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -47
[22937.156414,0]
[22937.413304,1] select 4651 (d.elixir.widget), adj 9, size 7307, to kill
[22937.413395,1] select 4930 (orola.messaging), adj 9, size 7702, to kill
[22937.413548,1] select 21393 (d.apps.uploader), adj 11, size 7110, to kill
[22937.413670,1] send sigkill to 21393 (d.apps.uploader), adj 11, size 7110
[22938.740207,1] select 4651 (d.elixir.widget), adj 9, size 7307, to kill
[22938.740207,1] select 4930 (orola.messaging), adj 9, size 7702, to kill
[22938.740238,1] select 21578 (id.partnersetup), adj 11, size 6445, to kill
[22938.740268,1] select 24286 (com.khl.kiosk), adj 11, size 6485, to kill
[22938.740299,1] send sigkill to 24286 (com.khl.kiosk), adj 11, size 6485
[22938.807322,1] select 4651 (d.elixir.widget), adj 9, size 7306, to kill
[22938.807413,1] select 4930 (orola.messaging), adj 9, size 7701, to kill
[22938.807535,1] select 21578 (id.partnersetup), adj 11, size 6444, to kill
[22938.807688,1] send sigkill to 21578 (id.partnersetup), adj 11, size 6444
[22939.665707,0] CPU1: shutdown
[22940.161022,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -47
[22940.161022,0]
[22940.224444,1] CPU1: Booted secondary processor
[22940.424627,0] CPU1: shutdown
[22943.173536,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -47
[22943.173566,0]
[22944.466684,1] CPU1: Booted secondary processor
[22945.614280,0] CPU1: shutdown
[22946.191787,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -46
[22946.191817,0]
[22946.256551,1] CPU1: Booted secondary processor
[22947.304987,0] CPU1: shutdown
[22947.806162,1] CPU1: Booted secondary processor
[22948.864578,0] CPU1: shutdown
[22949.211472,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -44
[22949.211472,0]
[22951.653133,1] CPU1: Booted secondary processor
[22952.223406,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -43
[22952.223406,0]
[22952.944816,0] CPU1: shutdown
[22955.238025,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -49
[22955.238056,0]
[22958.255666,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -49
[22958.255666,0]
[22961.269248,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -48
[22961.269278,0]
[22962.509687,1] CPU1: Booted secondary processor
[22963.815410,0] CPU1: shutdown
[22964.284996,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -48
[22964.285027,0]
[22964.583241,1] CPU1: Booted secondary processor
[22965.975489,0] CPU1: shutdown
[22966.591451,1] CPU1: Booted secondary processor
[22967.298822,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[22967.298822,0]
[22967.945610,0] CPU1: shutdown
[22970.321956,1] CPU1: Booted secondary processor
[22970.325252,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[22970.325283,0]
[22971.524550,0] CPU1: shutdown
[22973.338681,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -46
[22973.338712,0]
[22973.960137,1] CPU1: Booted secondary processor
[22975.355468,0] CPU1: shutdown
[22976.360748,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[22976.360748,0]
[22979.377870,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[22979.377900,0]
[22982.394839,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[22982.394869,0]
[22983.711030,1] CPU1: Booted secondary processor
[22984.615532,0] CPU1: shutdown
[22985.069583,1] CPU1: Booted secondary processor
[22985.412968,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[22985.412998,0]
[22985.676603,0] CPU1: shutdown
[22986.517653,1] CPU1: Booted secondary processor
[22987.665555,0] CPU1: shutdown
[22988.424810,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[22988.424840,0]
[22988.505109,1] CPU1: Booted secondary processor
[22989.915394,0] CPU1: shutdown
[22990.237995,1] CPU1: Booted secondary processor
[22991.135507,0] CPU1: shutdown
[22991.444129,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[22991.444160,0]
[22993.784706,1] CPU1: Booted secondary processor
[22994.457833,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -46
[22994.457863,0]
[22994.945365,0] CPU1: shutdown
[22996.750096,1] CPU1: Booted secondary processor
[22997.466501,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -46
[22997.466501,0]
[22997.898364,0] CPU1: shutdown
[22998.094335,1] CPU1: Booted secondary processor
[22998.545426,0] CPU1: shutdown
[22999.545701,1] CPU1: Booted secondary processor
[23000.477305,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -46
[23000.477305,0]
[23003.488079,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[23003.488079,0]
[23006.004789,0] CPU1: shutdown
[23006.252950,1] CPU1: Booted secondary processor
[23006.498211,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[23006.498211,0]
[23006.954888,0] CPU1: shutdown
[23007.116646,1] CPU1: Booted secondary processor
[23008.555925,0] CPU1: shutdown
[23009.509809,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[23009.509809,0]
[23011.585042,1] CPU1: Booted secondary processor
[23012.435370,0] CPU1: shutdown
[23012.518263,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[23012.518263,0]
[23015.531997,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -43
[23015.531997,0]
[23016.938163,1] CPU1: Booted secondary processor
[23017.746098,0] CPU1: shutdown
[23018.551439,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -44
[23018.551439,0]
[23019.653163,1] CPU1: Booted secondary processor
[23020.304926,0] CPU1: shutdown
[23021.571063,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[23021.571063,0]
[23024.591176,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -41
[23024.591207,0]
[23027.607841,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -33
[23027.607871,0]
[23030.623284,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -46
[23030.623314,0]
[23031.558001,1] CPU1: Booted secondary processor
[23032.019927,0] select 4651 (d.elixir.widget), adj 9, size 7300, to kill
[23032.020049,0] select 4930 (orola.messaging), adj 10, size 7708, to kill
[23032.020140,0] select 21719 (isfeng.greenify), adj 10, size 8207, to kill
[23032.020262,0] select 24123 (roidtweaker.two), adj 11, size 7273, to kill
[23032.020354,0] select 24266 (d.process.media), adj 11, size 9385, to kill
[23032.020476,0] send sigkill to 24266 (d.process.media), adj 11, size 9385
[23033.637567,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -44
[23033.637567,0]
[23034.655666,0] CPU1: shutdown
[23036.394442,1] CPU1: Booted secondary processor
[23036.647883,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -46
[23036.647883,0]
[23036.794686,0] CPU1: shutdown
[23039.659664,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -55
[23039.659695,0]
[23042.678587,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -57
[23042.678587,0]
[23044.853011,1] CPU1: Booted secondary processor
[23045.065005,0] pm8xxx_irq_mask_ack: mask acking rouge irq=664 pmirq=224
[23045.148173,0] pm8xxx_irq_mask_ack: mask acking rouge irq=664 pmirq=224
[23045.690948,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -56
[23045.690948,0]
[23047.462014,1] select 4651 (d.elixir.widget), adj 9, size 7290, to kill
[23047.462167,1] select 4930 (orola.messaging), adj 10, size 7692, to kill
[23047.462228,1] select 21719 (isfeng.greenify), adj 10, size 8079, to kill
[23047.462380,1] select 24123 (roidtweaker.two), adj 11, size 7198, to kill
[23047.462441,1] send sigkill to 24123 (roidtweaker.two), adj 11, size 7198
[23047.562609,1] select 4651 (d.elixir.widget), adj 9, size 7290, to kill
[23047.562762,1] select 4930 (orola.messaging), adj 10, size 7692, to kill
[23047.562823,1] select 21719 (isfeng.greenify), adj 10, size 8079, to kill
[23047.562976,1] send sigkill to 21719 (isfeng.greenify), adj 10, size 8079
[23048.696807,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -56
[23048.696807,0]
[23051.454109,0] CPU1: shutdown
[23051.717012,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -57
[23051.717012,0]
[23051.754277,1] CPU1: Booted secondary processor
[23052.133768,1] select 4651 (d.elixir.widget), adj 9, size 7290, to kill
[23052.133890,1] select 4930 (orola.messaging), adj 10, size 7692, to kill
[23052.133981,1] send sigkill to 4930 (orola.messaging), adj 10, size 7692
[23054.732821,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -48
[23054.732821,0]
[23055.875718,1] select 4651 (d.elixir.widget), adj 9, size 7311, to kill
[23055.875809,1] select 21257 (com.painless.pc), adj 9, size 7459, to kill
[23055.875931,1] select 23878 (tpass.lpandroid), adj 10, size 6868, to kill
[23055.876023,1] select 25908 (onlabs.v3client), adj 10, size 6969, to kill
[23055.876145,1] select 26063 (droid.gsf.login), adj 10, size 7177, to kill
[23055.876298,1] send sigkill to 26063 (droid.gsf.login), adj 10, size 7177
[23056.003720,1] select 4651 (d.elixir.widget), adj 9, size 7311, to kill
[23056.003842,1] select 21257 (com.painless.pc), adj 9, size 7459, to kill
[23056.003934,1] select 23878 (tpass.lpandroid), adj 10, size 6868, to kill
[23056.004056,1] select 25908 (onlabs.v3client), adj 10, size 6969, to kill
[23056.004148,1] send sigkill to 25908 (onlabs.v3client), adj 10, size 6969
[23057.544572,1] select 4651 (d.elixir.widget), adj 9, size 7311, to kill
[23057.544694,1] select 21257 (com.painless.pc), adj 9, size 7459, to kill
[23057.544755,1] select 23878 (tpass.lpandroid), adj 10, size 6868, to kill
[23057.544908,1] send sigkill to 23878 (tpass.lpandroid), adj 10, size 6868
[23057.748662,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -45
[23057.748692,0]
[23058.115333,1] select 4651 (d.elixir.widget), adj 9, size 7311, to kill
[23058.115516,1] select 21257 (com.painless.pc), adj 9, size 7459, to kill
[23058.115638,1] send sigkill to 21257 (com.painless.pc), adj 9, size 7459
[23058.264883,1] select 4651 (d.elixir.widget), adj 9, size 7311, to kill
[23058.265005,1] send sigkill to 4651 (d.elixir.widget), adj 9, size 7311
[23059.371063,1] select 25945 (.android.elixir), adj 9, size 6803, to kill
[23059.371247,1] send sigkill to 25945 (.android.elixir), adj 9, size 6803
[23059.926321,1] select 25983 (ainfire.supersu), adj 9, size 6737, to kill
[23059.926473,1] send sigkill to 25983 (ainfire.supersu), adj 9, size 6737
[23060.753240,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -53
[23060.753240,0]
[23061.223742,1] select 1470 (gle.android.gms), adj 5, size 11204, to kill
[23061.223833,1] select 1498 (d.process.acore), adj 6, size 10584, to kill
[23061.223894,1] select 1750 (id.gms.wearable), adj 8, size 7018, to kill
[23061.224047,1] select 23454 (a.podcastaddict), adj 8, size 9917, to kill
[23061.224138,1] send sigkill to 23454 (a.podcastaddict), adj 8, size 9917
[23063.763464,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -54
[23063.763494,0]
[23066.773078,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -53
[23066.773078,0]
[23069.605155,0] CPU1: shutdown
[23069.746617,1] CPU1: Booted secondary processor
[23069.783058,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -52
[23069.783089,0]
[23072.793038,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -59
[23072.793069,0]
[23075.799783,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -60
[23075.799783,0]
[23076.056368,0] CPU1: shutdown
[23076.956505,1] CPU1: Booted secondary processor
[23078.224749,0] CPU1: shutdown
[23078.810587,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -57
[23078.810587,0]
[23079.394228,1] CPU1: Booted secondary processor
[23079.685759,0] CPU1: shutdown
[23080.129922,0] pm8xxx_irq_mask_ack: mask acking rouge irq=664 pmirq=224
[23080.146128,1] CPU1: Booted secondary processor
[23081.365326,0] pm8xxx_irq_mask_ack: mask acking rouge irq=664 pmirq=224
[23081.823589,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -57
[23081.823589,0]
[23081.916005,0] CPU1: shutdown
[23082.414494,1] CPU1: Booted secondary processor
[23084.928671,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -59
[23084.928671,0]
[23087.939078,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -55
[23087.939078,0]
[23090.865585,0] CPU1: shutdown
[23090.950218,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -55
[23090.950218,0]
[23091.748723,1] CPU1: Booted secondary processor
[23093.960870,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -55
[23093.960870,0]
[23096.765661,0] CPU1: shutdown
[23096.971491,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -54
[23096.971491,0]
[23097.964318,1] CPU1: Booted secondary processor
[23098.415745,0] CPU1: shutdown
[23099.564410,1] CPU1: Booted secondary processor
[23099.982478,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -57
[23099.982478,0]
[23100.215074,0] CPU1: shutdown
[23101.214433,1] CPU1: Booted secondary processor
[23101.915211,0] CPU1: shutdown
[23102.964502,1] CPU1: Booted secondary processor
[23102.996884,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -62
[23102.996884,0]
[23103.364685,0] CPU1: shutdown
[23105.714631,1] CPU1: Booted secondary processor
[23105.923910,0] CPU1: shutdown
[23106.007383,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -55
[23106.007383,0]
[23107.964502,1] CPU1: Booted secondary processor
[23108.415318,0] CPU1: shutdown
[23109.016997,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -58
[23109.016997,0]
[23109.714387,1] CPU1: Booted secondary processor
[23109.915181,0] CPU1: shutdown
[23112.028442,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -61
[23112.028472,0]
[23112.670468,0] [0:24115:E AT] Set DXE Power state 0
[23112.964318,1] CPU1: Booted secondary processor
[23113.043031,0] [0:24115:E AT] Set DXE Power state 2
[23113.051363,0] [WLAN][24116:E :TL ] WLAN TL:No station registered with TL at this point
[23115.037262,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -60
[23115.037262,0]
[23116.414311,0] CPU1: shutdown
[23116.564410,1] CPU1: Booted secondary processor
[23116.765265,0] CPU1: shutdown
[23117.964380,1] CPU1: Booted secondary processor
[23118.047609,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -59
[23118.047609,0]
[23119.115638,0] CPU1: shutdown
[23121.061129,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -57
[23121.061129,0]
[23122.964502,1] CPU1: Booted secondary processor
[23123.915394,0] CPU1: shutdown
[23124.071842,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -51
[23124.071842,0]
[23127.083287,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -50
[23127.083287,0]
[23127.964318,1] CPU1: Booted secondary processor
[23128.516981,0] CPU1: shutdown
[23130.093633,0] [WLAN][24115:E :TL ] WLAN TL:bmpsRssi -51
[23130.093664,0]
[23130.329495,0] request_suspend_state: sleep (0->3) at 7363777009922 (2014-10-28 18:02:37.740226768 UTC)
[23130.389925,0] Normal Zone Compacted.
[23130.390078,0] lm3532_early_suspend: suspended
[23130.390993,0] MDP: unknown ioctl (cmd=40046da0) received!
[23130.397799,0] [WLAN][23200:E :HDD] hdd_conf_hostarpoffload:
[23130.397799,0]
[23130.398013,0] [WLAN][23200:E :HDD] hdd_conf_hostarpoffload: Enabled
[23130.398013,0]
[23130.422673,0] panel_disable is called
[23130.484416,1] CPU1: Booted secondary processor
[23130.562518,0] panel_disable completed
[23130.583729,0] dtv_pipe/hdmi as primary are not configured yet
[23130.584248,0] atmxt_set_ic_state: IC state ACTIVE -> SLEEP
[23131.294213,1] alarm_release: clear alarm, pending 0
[23131.294305,1] alarm_release: clear alarm, pending 0
[23131.294457,1] alarm_release: clear alarm, pending 0
[23131.294518,1] alarm_release: clear alarm, pending 0
[23131.334622,0] CPU1: shutdown
[23131.648066,0] request_suspend_state: wakeup (3->0) at 7365095581558 (2014-10-28 18:02:39.058798404 UTC)
[23131.648524,0] atmxt_set_ic_state: IC state SLEEP -> ACTIVE
[23131.650539,0] init: untracked pid 341 exited
[23131.664456,0] atmxt_message_handler6: Touch IC is calibrating.
[23131.693633,0] atmxt_message_handler6: Touch IC calibration complete.
[23131.729922,0] panel_enable is called
[23131.834302,1] CPU1: Booted secondary processor
[23131.857650,0] panel_enable completed. Power_mode =0x98
[23131.859756,0] init: untracked pid 25968 exited
[23131.880632,0] init: untracked pid 1430 exited
[23131.891863,0] MIPI MOT Panel is ON
[23131.892016,0] [WLAN][25401:E :HDD] hdd_conf_hostarpoffload:
[23131.892016,0]
[23131.946891,0] lm3532_early_resume: enabling PWM
[23131.947410,0] lm3532_early_resume: resumed
[23131.992702,0] init: untracked pid 1064 exited
[23131.992947,0] init: untracked pid 27130 exited
[23131.993130,0] init: untracked pid 1083 exited
[23131.994259,0] init: untracked pid 26768 exited
[23132.004239,0] init: untracked pid 1057 exited
[23132.006192,0] init: untracked pid 347 exited
[23132.194106,0] acdb_mmap: PMEM is not allocated, yet!
[23132.196456,0] init: untracked pid 1750 exited
[23132.206803,0] init: untracked pid 26862 exited
[23132.516707,1] init: untracked pid 1470 exited
[23132.885484,0] CPU1: shutdown
[23135.750218,0] Report pwrkey press event
[23135.889727,0] Report pwrkey release event
[23136.793099,0] Report pwrkey press event
[23143.793465,0] Power key held for 7 seconds; will reboot on release.
[23144.616539,0] Power key released; REBOOTING.
[23144.616630,0] Going down for restart now

Related

The problem hangs boot! Help!
Install android 2.2 for instructions.
Androida stitch boot and reboot the phone vibrates 2 times, there is a white screen with white letters and black penguin after 1-2 seconds stops and load weight. Tried everything possible nbh, who collected himself in atools. In general the white screen with white penguin only works on kernel 2.6.32 with the following parameters polaris-240x320-Froyo-1-2.6.32.
SCREEN: hxtp://i56.tinypic.com/1y3ebt.jpg (hxtp ->http)
Black screen with the penguin got the normal parameters of polaris-240x320-Froyo-3-2.6.32 but the download just hangs like a white screen. At the core of 2.6.25 for all pereprobovanyh me Parameter only color bars. What's the problem? Who knows how to solve it?

Decided to hold a small exeperimental. I had an old build android-1.5-2009-07-09, which run in the past from Presov to small exeperimental. I had an old build android-1.5-2009-07-09, which run in the past out of Haret normal, with a black boot. This assembly contains:
1) with parameters default.tht
(# Alloctest 0x2000
set RAMSIZE 0x08000000
set MTYPE 1723
set KERNEL zImage
set initrd initrd.gz
#
# The following kernel parameters are useful
# Ppp.username - The username used to connect to the network when dialing
# Ppp.password - The password used to connect to the network when dialing
# Ppp.apn - Set apn of your provider
# Ppp.nostart - Set ppp.nostart = 1 to disable starting the ppp connection on boot
# Msm_sdcc.msmsdcc_fmax - The maximum frequency (in Hz) used by the SD controller
# Pm.sleep_mode - The mode used when the phone is off
# 0 = Power Collapse Suspend, 1 = Power Collapse, 2 = Apps Sleep,
# 3 = Slow Clock and Wait for Interrupt 4 = Wait for Interrupt
# Default is 1, use one for best power savings
# Board-htcpolaris.panel_type - Panel type used to power the panel off and on
# 0 = Don't power off the panel (Default)
# 1 2 = Sony = Topoly 3 = Topoly (probably just the same as 2)
# Lcd.density - Defaults to 160, 128, shows more on screen
#
set cmdline "board-htcpolaris.panel_type = 0 ppp.apn = wxw.vodafone.net.nz ppp.username = none ppp.password = none pm.sleep_mode = 1 mddi.width = 324 mddi.height = 432 no_console_suspend board-htcpolaris -battery.battery_capacity = 1350 mddi_client_vogue.vsync = 0 "
bottles)
2) haret.ehe,
3) initrd.gz,
4) resources.zip,
5) system.img,
6) zImage
Try to start the assembly with diabetes. In the beginning is all fine, black boot, but then hangs up and says: Varning ---
sisten.img not found on the CD.
It's weird, because sisten.img lies on CD.
Poshamaniv to build its atools Fail default with the following parameters:
set RAMSIZE 0x07300000
set MTYPE 1723
set KERNEL zImage
set initrd initrd.lzma
set cmdline "no_console_suspend board-htcpolaris-battery.battery_capacity = 1350 ppp.nostart = 0 hw3d.version = 1 mddi.width = 324 mddi.height = 432 clock-7x00.mddi = 0xa51 board-htcpolaris.panel_type = a board-htcpolaris . no_boot_vibration = 1 mddi_client_vogue.vsync = 0 sys_partition = / sdcard / andboot / system.img data_partition = / sdcard / andboot / data.img fstype = 2 "
boot
Try to run the assembly Froyo [2.2.2] My Modified Fresh Froyo Release 20-2-2011 with these parameters is out of Haret. The loader is still a white background. That's what vydalood Haret. This assembly contains: hxtp://i53.tinypic.com/20z9y8k.jpg (hxtp ->http)
Those who have any ideas? Why download the old version, so good with black boot and Froyo not?

I climbed a lot of forums and for some reason or where there is no answer to this question, although people with the same problem there. I have a broken display and I replaced it with a new one, after that there was such key problems.
On one of the branches of the forum says that they say it is because the display problem and needed origenalny. But after analyzing all available information, I think that probably in problemma HARD-SPL 2.20Olix!!! This SPL does not support the display non-origenalnogo.
I think that this key problems to be solved, because sooner or later and your display may break mashines and I think you do not want to buy origenalny display for $ 50-100 for this old devaysa.
By this I beg you, help me to find someone who could create a new HARD-SPL for HTC Polaris. Maybe someone knows and understands the programming and be able to make himself SPL. Please respond to all!

Is anyone aware of a program that would allow me to automate a series of "touch" events on Android to test an app I have written. Something controlled by ADB I would assume.
For example;
Touch @ X axis = 500 Y axis = 200;
Wait 0.5 seconds;
Release touch;
Wait 1.9 seconds;
Touch @ X axis = 300 Y axis = 400;
Wait 0.5 seconds;
Release touch;
etc.

Hi
So you want to emulate the native android shutdown sequence. Broken power button? Car or fixed Nexus 7 installation? TV Stick? Here is the solution! (I advise you not to use one of the many shutdown apps because they shutdown without unmounting filesystem etc. and thus can damage your filesystem in the long run).
This should work on ANY Android device!
You can do it directly on your device, no adb needed. BUT: You have to be rooted!
How to:
1. Install Bash X from playstore (I'm not affiliated with them)
2. Start it and choose #root shell
3. Type: getevent -c 3
4. Push power button and release it (short, without the boot dialog)
5. Now you see something like this:
# getevent -c 3
add device 1: /dev/input/event0
name: "pmic8xxx_pwrkey"
add device 2: /dev/input/event1
name: "gk-keypad-8064"
add device 3: /dev/input/event4
name: "hs_detect"
add device 4: /dev/input/event3
name: "suspend_autotest_pwrkey"
could not get driver version for /dev/input/mice, Not a typewriter
add device 5: /dev/input/event2
name: "touch_mxt1188S"
/dev/input/event0: 0001 0074 00000001
/dev/input/event0: 0000 0000 00000000
/dev/input/event0: 0001 0074 00000000
#
add device output shows you the event numbers off your input devices. On my LG Pad the power key is assigned to /dev/input/event0. On your device it will be a other eventX number. On my Nexus 7 it is event2 (gpio).
Now we convert the hex strings of the events in dec (google a online converter). The last 3 lines then look like this:
/dev/input/event0: 1 116 1
/dev/input/event0: 0 0 0
/dev/input/event0: 1 116 0
1 116 1 means power key down
1 116 0 means power key release
6. Install Tasker. Set up a new profile with the profile you want to be the trigger for your action (shutdown). Under tasks choose script, start shell and paste our new script:
/dev/input/event0: 1 116 1;
/dev/input/event0: 0 0 0;
sleep 1;
/dev/input/event0: 1 116 0;
Now we need only some dpad keys for going down and right in the menu:
input keyevent 20;
input keyevent 66;
input keyevent 22;
input keyevent 66;
(Where 20 is down, 22 is right and 66 is enter. This works on stock and CM10)
The Tasker action finally looks like this:
/dev/input/event0: 1 116 1;
/dev/input/event0: 0 0 0;
/dev/input/event0: 1 116 0;
input keyevent 20;
input keyevent 66;
input keyevent 22;
input keyevent 66;
exit;
Don't forget to check "use root" in your action. Test it out!
Cool it is
I also thank the many people working on this question on other places.
edit: if you experience no proper shutdown (have to press 15sec power button for boot), its because tasker hangs on shutdown. Export a app from tasker and start it with automateit. Weird but it works
Olivier

I'm struggling with calibration of a touchscreen on Android plataform.
It is an USB Single-Touch Touchscreen from vendor 0dfc and product 0001 as checked with dmesg:
Code:
<6>[ 4118.091541] input: USB Touchscreen 0dfc:0001 as /devices/platform/usb20_host/usb2/2-1/2-1.3/2-1.3:1.0/input/input23
I'm pushing the Vendor_0dfc_Product_0001.idc file /data/system/devices/idc/ (following the documentation from android source - IDC)
I got the touch device with all requirements for single touch events:
Code:
[email protected]:/ # getevent -il /dev/input/event3
add device 1: /dev/input/event3
bus: 0003
vendor 0dfc
product 0001
version 0202
name: "USB Touchscreen 0dfc:0001"
location: "usb-usb20_host-1.3/input0"
id: ""
version: 1.0.1
events:
KEY (0001): BTN_TOUCH
ABS (0003): ABS_X : value 540, min 0, max 32767, fuzz 0, flat 0, resolution 0
ABS_Y : value 289, min 0, max 32767, fuzz 0, flat 0, resolution 0
input props:
<none>
I also enabled the Pointer Location option from Developer options (Android settings) in order to debug this stage of calibration.
Setup 1
Code:
touch.deviceType = touchScreen
With this setup (1) all the gestures on the touchscreen take place at the up-left corner - just a few pixels left/right/up/down no matter the gesture (swipe). All the touchscreen get events. All the gestures are reversed - when swipe left the pointer goes right; when swipe up, the pointer goes down.
Setup 2
Code:
touch.deviceType = pointer
touch.gestureMode = pointer
With this setup (2), as expected, it shows a pointer, placed at the position from the last pointer device left (mouse). All the gestures on the touchscreen (no matter the swipe size) keep beaving like setup 1 - move only a few pixels with each swipe event, and with reversed axis.
Setup 3
Code:
touch.deviceType = pointer
touch.gestureMode = spots
With this setup (3) the result is the same as setup 2. I just did that to prove that the IDC file is being interpreted correctly.
At this stage, as you can check by now, I have a working IDC file (setup 1) requiring calibration for this touch device.
I tried a lot of combinations from other IDC files (internet samples) and from android source - IDC - ANY OTHER PROPERTY TOOK EFFECT (NOT A SINGLE ONE) - raw.*, output.*, touch.size.*
Does anyone knows how to calibrate properly a touch screen in Android that could guide me in this process?
Thank you

Hi!
I just got my MXQ Pro S905 android tv box and right out the box, the remote control didn't work. I googled and visited different website and I found a remote.conf file to replace the current one on the box, so I did. Now the remote partially works. I can use the arrows, volume up down, etc... The problem is I still can't get the power button or the mouse to work Any expert help on how to get it to work please?
Here is the new remote.conf file that partially works ( power button and mouse don't work):
#************************************************* ************************************************** ******
#this file is configuration for each factory remote device
# work_mode 0 :software mode 1 :hardware mode
# repeat_enable 0 :disable repeat 1 :enable repeat
#
# factory_code each device has it's unique factory code.
# pattern:custom_code(16bit)+index_code(16bit)
# examble: 0xff000001 = 0xff00(custom cod) 0001 (index)
#
# release_delay unit:ms.release will report from kernel to user layer after this period of time
# from press or repeat triggered.
#
# debug_enable 0 :debug disable 1 :debug disable
#
# SW MODE:
# bit_count how many bits in each frame
# tw_leader_act time window for leader active
# tw_bit0 time window for bit0 time.
# tw_bit1 time window for bit1 time
# tw_repeat_leader time window for repeat leader
# REG
# reg_base_gen set value for PREG_IR_DEC_BASE_GEN
# reg_control set value for PREG_IR_DEC_CONTROL
# reg_leader_act set value for PREG_IR_DEC_LEADER_ACTIVE
# reg_leader_idle set value for PREG_IR_DEC_LEADER_IDLE
# reg_repeat_leader set value for PREG_IR_DEC_REPEAT_IDLE
# reg_bit0_time set value for PREG_IR_DEC_BIT0_TIME
#************************************************* ************************************************** **********
#amlogic NEC remote
factory_code = 0x7f800001
work_mode = 0
repeat_enable = 1
repeat_delay = 40
repeat_peroid = 39
release_delay = 121
debug_enable = 1
fn_key_scancode = 0x15
left_key_scancode = 0x1c
right_key_scancode = 0x48
up_key_scancode = 0x44
down_key_scancode = 0x1d
ok_key_scancode = 0x5c
pageup_key_scancode = 0x04
pagedown_key_scancode = 0x1b
mouse_begin
0 0x1c
1 0x48
2 0x44
3 0x1d
mouse_end
key_begin
0x4d 113
0x56 114
0x4e 115
0x25 105
0x26 103
0x27 106
0x28 108
0x0d 97
0x1b 158
0x53 102
0x51 704
0x49 139
0x52 388
0x31 2
0x32 3
0x33 4
0x34 5
0x35 6
0x36 7
0x37 8
0x38 9
0x39 10
0x30 11
0x58 389
0x44 14
0xbd 122
0xbb 123
0x09 393
0x11 390
0x54 391
0x4f 392
key_end
repeat_key_begin
0x4d 113
0x56 114
0x4e 115
0x25 105
0x26 103
0x27 106
0x28 108
0x0d 28
0x1b 158
0x53 102
0x51 704
0x49 139
0x52 388
0x31 2
0x32 3
0x33 4
0x34 5
0x35 6
0x36 7
0x37 8
0x38 9
0x39 10
0x30 11
0x58 389
0x44 111
0xbd 122
0xbb 123
0x09 164
0x11 390
0x54 391
0x4f 392
repeat_key_end

try a reflash
guide here
http://forum.xda-developers.com/showthread.php?t=3400814
Sent from my SM-G920F using XDA-Developers mobile app