Related
Hi all ...
we need some (maybe a lot) help from programmers to try to remap the hard keyboard keys from mda3.
As many guys know, we are a lot that we buy the mda3 with german hard keyboard layout... and now that we all have an english os, we must remap the key and symbols.
Any idea will be appreciated, we have all files from german os an english os.
Nobody want to broke the keyboard to glue the buttons in other place...
Nobody now how and where can order another english keyboard and replace it phisically.
Remain two thinks:
1. find the file with the layout and remap the symbols via hex edit
2. recompile a new layout (and here may be usefull for future progs)
All idea wiil be apreciated, all guru's invited
Please help us ... we can not take advantage of the new hard keyboard in this mode.
Thanks all before and...
COURAGE FOR ALL NEW POSTS THAT MUST BE UPDATED(POSTED) !!!
DenisJ
Actually, keys and numbers are fine. It's punctuation that is almost impossible to use unless you have a good memory
From what I remember of the old thread that got wasted, a few things were looked at but it seems harder than it should. You would think one or two files transferred from the PDA2K to the MDA III, like a keyboard dll and a mapping data file, would do the trick but, as usual with engineers, they made it harder than it should.
I can suggest another way for this remapping: just writing a kind of program lookind for keypressings and substitute them with another keystrokes.
I've already done it for Russian keyboard (project home page is http://ae.inc.ru/bahrus.html , but it is Russian only). Current state is "beta".
I can do some key remappings this way. But I need to know which of the keys should be replaced with which one. Or replacement table may be simply saved in config.
I'll do a tabel with the replaced hex value ...
You need only the xex value for this or need more ?
Thanks a lot
Denis
Let's try (before find all remapping simbol) to remap only the two letters z and y.
Symbolic constant Value (Hex) keyboard equivalent
VK_Y 59 Y key
VK_Z 5A Z key
like ... if '59' then '5A' and viceversa...
If we can remap this two letters, we can remap all we want.
Thanks a lot
Denis
german to english
since the site posts went down i have received my mda3 in german of course and would love to know how to flash it with an english rom, all other threads however speak of xda3nbftool which i can't find anywhere, also many of the links for required files don't work. any help please?? thank you
Re: german to english
paulmurphy777 said:
since the site posts went down i have received my mda3 in german of course and would love to know how to flash it with an english rom, all other threads however speak of xda3nbftool which i can't find anywhere, also many of the links for required files don't work. any help please?? thank you
Click to expand...
Click to collapse
Go here:
ftp://xda:[email protected]/
and look for Bluangel folder.
Regards
Ok, I decided to implement more general solution for this problem and develop customizable hardware key-remapping software. This application wil allow to remap not only BlueAngel built-in keyboard but almost any hardware keybord connected to wince (some of my friends use Luch or Flexis external keyboards with PDA).
Hope first beta version will appear next week.
thank you!, sure i'll be back with more questions though!
Fantastic!
I'm excited about this
AE said:
Ok, I decided to implement more general solution for this problem and develop customizable hardware key-remapping software. This application wil allow to remap not only BlueAngel built-in keyboard but almost any hardware keybord connected to wince (some of my friends use Luch or Flexis external keyboards with PDA).
Hope first beta version will appear next week.
Click to expand...
Click to collapse
Wow, that's great news. (exactly what I wanted to hear!) Keep up the good work. (you rock)
AEKMap is available at http://ae.inc.ru/aekmap.html
To make "remapping" you need:
- install the program;
- run Start - Programs - AEKMap Settings and choose "AZERTY MDAIII with English ROM" in first combo box
- set three other optional layouts to "unassigned" and/or unassign "switch" key.
If you want to create specific layout, you may start with editing one of the existing. Use \Program Files\AEKMap\AEKMapScan.exe to define keyboard pseudo-scan codes.
To find unicode character codes use Start -> Programs -> Accessories -> System Tools -> Character Map on your desktop
This program may be closed with popup menu on system tray (lower-right corner of today screen).
And I'm definitly sure that some bugs are in this utility now. Let me know if you find them
Also send me with your layouts to be published on site (will appear in a days)
P.S.: AEKMapper may be used to remap almost any external or built-in hardware keyboard recognized by system.
AWESOME!
Thanks for doing this. If i understand correctly, what's needed now to get the German MDA III keyboard mapped correctly, following the imate english rom installation, is to:
use AEKmapscan.exe to identify all the keys that need remapping
then look up the correct unicode characters for the desired keymapping
enter them into a .AEK file and put into the Program Files/AEKMap directory on the MDA III.
If i get some free time today, that's what I'll do. If anybody beats me to it, please post!
thanks again, AE!
So here is a mostly working layout file for the MDAIII German. The only thing that seems to be not working is the semicolon/colon key just to the right of the space bar. that key seems to have no shifted mode, according to aekmapscan.exe
also: if aekmapscan.exe is running, this appears to stop the keyboard from working at all in applications. it needs to be stopped entirely.
Thanks again for this great tool!
It is always nice to know your job is needful to someone
As for the problem with semicolon: changing CapsLock/Shift processing flags should help:
HookShift 1
HookCapsLock 1
Probably I'll find a better solution for this later, but now I can't...
Official project home page will be available at http://ae.inc.ru/aekmap.html
thanks for the tool, works great. Can you add an option to not have the mapping name on the bottom, i.e. DenisJ Layout? It covers up the wireless icon that I use to turn Wifi on & off.
thanks again for the app
you already can turn it off. that's the "hint" option in the settings.
A parts from thanks the great job from AE, i wan't to try to ask a question:
In the registry there's a part...
HKCU/Keyboard Layout that have a profile value..
Could it be usefull..
My German Mda3 have... preload/1 set to e0010409.
Can anyone post the english Pda2K value...
Rups..
Bug report
AEKMap works quite well, thanks to the developer!
But...
I noticed that, when AEKMap is on, you can´t adjust sound/volume levels from the external button on the left side of the screen. Is that a bug or a feature? :roll:
Second thing is that if you switch the AEKMap off, you can switch it on only by softreset. Is that ment to be?
Can anyone confirm those features, or is it just in my MDAIII?
-Jigi
Sorry guys but i just arive from my fisrt (this year) snowboard weekend
AE many many thanks from me and (as can you see) from all other guys with the same german mda3...
I just tryed some days ago to begin something like this using EVC++ 4.0 ... but it's too much to study for an as400 programmer
This will be surrely in my startup programs for a log live time of my mda3...
Surelly we will ask you some options in future ...
Another lot of thanks
DenisJ
Basically I wasn't overly impressed when I saw the iphone in terms of what it did, because it doesn't do anything my WM5 doesn't. the only thing I was impressed at was the interface, the total touch screen etc(altho it is missing a qwerty key board which I couldn't live with out). One part of the touch screen interface that I was the most impressed with was the finger dragging, scrolling! But this can be done on WM5 devices because I've already downloaded Sygic's .mobile which allows you to do it through your contacts.
So Basically I'm sure that one of the many clever programmers on here could write a little program that allows you to use finger scrolling where ever a scroll bar is needed? I.e. file emplorer, music menu(windows media player), text message list, photos, etc.
Or if someone knows where I could get such a program from?
Thanks
this would be sweet because we windows fans wouldn't have to convert to the darkside.
just like the early dayds of apple.....microsoft swoops in and reinvents the game. but only thing it aint microsoft doing this.
why buy a new phone when u can take the guts of it and dump it into your own
good job on the programers you guys rock.
Check this video out, the guy has done just that!
http://techdigest.tv/2007/02/watch_the_iphon.html
I've seen that video already, but thanks. it was that and the program .mobile that made me hope that someone on here would be able to do it for the rest of the windows mobile platform! if I was talented enough I'd do it myself but this is way beyond me. i just think it would be a great to be able to navigate menus and list and make life a lot easier.
Can we download it from somewhere?
Download What?
that GUI seen on that video.
the best program to make it look like that is wisbar desktop but it costs! has for the menu scrolling i haven't got a clue thats why i was hoping someone may be able to write a program on here for it
baspooner said:
the best program to make it look like that is wisbar desktop but it costs! has for the menu scrolling i haven't got a clue thats why i was hoping someone may be able to write a program on here for it
Click to expand...
Click to collapse
Agree, i used the wisbar advance, but the scrolling gui was amazing!
I am wondering how he did it?
it was, but i don't know how he did it! i know you can down load a program called .mobile and that allows you to scroll through your contact like that, so it clearly can be done! so someone must be able to do it for the rest of the phone?!??!
What is it that can or can't be done guys?
Picsel Browser uses momentum based full screen drag scrolling, amongst other apps. It's not a difficult thing to do. The implementation in the video is particularly nice (if not particularly useful IMHO), but it's not some kind of mystical voodoo. It's just programming.
V
vijay,
I don't think you would be capable of doing this, no way....
(ps: please, please rise to the challenge!)
On a serious note the Universal lacks a scroll wheel which I have always had on my previous PDAs. To be able to have a generic touchscreen based scrolling mechanism would be very useful (ie not just for tracks and contacts, but for everything).
Can anyone post a link to the download of this?
slider lock feature.....
Guys,
According to his website, before it was suspended...
He says he was using
PPL1.20. PPL which can be downloaded for free from http://arianesoft.ca
I downoaded this but have no idea on how to use it to get the same results?
Anyone interested in getting the slider lock portion of that video working?
tommyd75 said:
Guys,
According to his website, before it was suspended...
He says he was using
PPL1.20. PPL which can be downloaded for free from http://arianesoft.ca
I downoaded this but have no idea on how to use it to get the same results?
Anyone interested in getting the slider lock portion of that video working?
Click to expand...
Click to collapse
As explained by Vijay this is just programming. If you dont have programming skills, just forget it. If you do then the technical part is not that difficult. The whole point is more about doinga nice design
Anyway let's hope he will make is work public (The scrolling bar is one thing, but the whole setup is actually nice...)
If anyone has this (doubt the guy gave it out before he got shut down) but in case he did... i would like to get my hands on this...
the point of me starting this thread was to see if anyone on here knew where I could get a program that would allow me to scroll all the menus and lists in my WM5 by dragging my finger across the screen, if there wasn't already a program out there then I wondered if someone could write a program for it? as my skills in this area are nowhere near good enough! I think a program like this with look great but more importantly be really useful, as I use my finger to navigate through most of my phone.
if this is just programing, please can someone with the skills do it????
Thanks
the m600-iphone clon demovideo is no longer available at youtube....
the apple tentacles are very lengths...
INTERESTINGLY.. this guy is a Malaysian (Chinese). . and I would have thought such geeky move ought to be from the States.
well i have a spare wizard to try this on if some one can direct me on what software to use. i have some spare time lol
Hi,
This is probably a no, (and i've searched for this already btw but not found anything), but....
Is it possible to launch a different application other than the touch cube when you slide your thumb up the screen ?
thanks in advance
Matt
Yes it is, but not with the normal TouchFlo. Search for FTouchFlo, it does basically the same, but you can assign any command to each direction of sliding your finger over the screen.
That means four different possibilities.
Don't know if this helps, but you can try this thread:
http://forum.xda-developers.com/showthread.php?p=1971424
Note that VJBrisk is basically just a tiny app I made to allow you to replace one executable (eg BioTouch.exe), with VJBrisk, and VJBrisk will allow you to launch a shortcut with parameters.
You may well not need to do that step, depending on your needs. The thread above explains this much better than my mumblings.
V
cheers chaps, will take a look at these.
I had hoped it was as simple as a registry change but guess not
thanks
Matt
Use UltimateLauncher, and get rid of TouchFLO Cube. It also lets you assign functions to run any .EXE or .LNK to swipes in all 4 directions. That's what I did. But I only use Up and Down. Up to get open my contacts and down to invoke the S2U2 screen lock.
I've decided to go with vjbrisk which is working very well at the moment.
however, even with show all files I am unable to fine either LaunchStartupApp.lst or Launchstartupapp in the windows file. Am using a polaris (o2 orbit 2)...any ideas where I can find this or if it's called anything else.
It's not the end of the world, would just be useful to free up 5mb or so.
cheers
Matt
With my TyTN = Hermes and WM6.0 the autosuggestion of words seems much better than the Raphaels (at least in the hardware keybord stance).
Can someone explain why that is or if I have haven´t understood the utility or something else right?
With TyTN it basically suggests 4 alternatives in a diagonal way, it can be one word or SEVERAL words in a row, depending on what I´we written before. And you choose from them with the upp and down arrow keys. Simple and quick.
With Raphael it suggests several ONLY singular words horisontally, and if it´s not in the dictionary it automatically chooses another word than the one you´we just written (!?). Slow and awkward.
Also - who is behind this solution? Windows Mobile 6.1 or is it HTC Raphaels unique solution?
Thanks in advance
/Danne
Anybody have an opinion or information on this matter?
At least the system is a part of WM6.1 or if it´s Raphaels unique solution? Because I´m thinking about buying a Kaiser with WM6.1 instead and wonder if it has the same solution.
Sorry, no additional info, but I'm in the same boat so to speak.
I find it completely useless, specially since I don't always use English in my SMS messages, and I found that it becomes a nightmare if it doesn't find a match and then forces my word to something it thinks it should be.
What I cannot understand is that under Settings-Personal-Input-Word Completion - I have DISABLED it, but it still friking tries to complete my words, even in keyboard mode???
Do you know of another place to disable this dastardly excuse of a feature?
HAH!
Found it! If you want to disable it completely, the do the following:
1) make sure you disable it under settings - all settings - personal - Word Completion.
2) When you open a new message, bring up the virtual keyboard and look for the button that reads "ABC T9" - it has a toggle on the button, make sure it is on "ABC" and NOT T9 -voila!
Now I can SMS again!
I´m glad I was not the only one being irritated about this. But at least it´s possible to turn it off, so thanks for posting the solution Piie
I actually returned my TP because of this and severeal other reasons but I´m thinking about buying it again or some other WM6.1 phone. So do you know if your solution to turn if of works with Word Mobile documents as well?
And still, if somebody knows if it´s part of Raphael or WM6.1, please let me know.
Agreed 100% on the uselessness of word completion feature on the TP. On mine, the T9 feature actually slows the sms application so much as to make it completely unusable. This is probably my biggest complaint with this device.
Yip, following the steps as posted also removes the predictive text completely for Word ( and all other apps I have used so far)...
Thanks piie
I believe its part of the TP keyboard (SIP) not WM6.1 , when i had my kaiser with wm6.1 this "IRRITATING" issue was not there, but when i installed the diamond keyboard on my kaiser, this thing came out...... now its part of the TP because of its keyboard.......... so its HTC
I was getting annoyed with the behavior described in posts 1 and 2, disableds the whole thing too (I had an Excalibur before and it seemed to work far better on this particular aspect).
However, I decided to give the TP's T9 another shot and started changing it's configurations and finally got rid of the annoiance related: when on a text field, bring up the T9 options by pressing "Fn" + "Space", select "T9" settings and on the screen that appears uncheck the "Spell Correction" and "Auto-substitution" boxes.
Now I'm using the word prediction (T9) again just like I used in my old device, tipying much faster! (specially because I commonly write in portuguese and my keyboard is the UK one...).
Hope this helps you guys.
Cheers.
Sweet!
So you can still have predictive text, but remove the actual "irritant" of it overriding your word if it doesn't match it's dictionery - seems like that is the answer to your problem Danne?
For me - I really don't care for ANY kind of prediction - most often than not, even in English, the suggestions are maybe 30% usefull if that...
Great!
Yes, this is solution and now I know it´s part of Raphael/Diamond and not WM6.1!
Still, the Hermes WM6-solution with prediction of several words based on what you previously have written seems better. But I am happy with this!
I guess that´s the last words for me in this discussion.
Thanks guys!
just wondering how to disable word completion without installing htc ezinput, because at input settings by disabling it, doesn't work at all.
here's everything you need to know on how to get back to the old style autocorrect and change your dictionaries: http://www.fuzemobility.com/?p=1527
That however breaks your hardware keyboard
sym key will stop working and you can't get pound and euro sign using FN key....
see my thread here:
http://forum.xda-developers.com/showthread.php?t=470647
Hi all,
I've had my TP for about a month now and it's great and thanks for all the great info and tweaks on the board.
I have Chinese (CE Star) installed as a selectable writing language so I was wondering is it possible to use/remap the hardware keyboard to switch between writing languages like on a desktop PC (ALT+Shift) since it is much more convienient using keys to switch than taking my hands off the keyboard and pulling up the SIP.
I tried using PQzII but I couldn't get it to work, so no luck there.
Any suggestions?
Any ideas?
If you can get a program that will switch with a command line, at least on the AT&T Fuze, there are a number of shortcuts the keyboard driver looks for on keypress, and if you have that shortcut there it will execute that rather than the pre-programmed function. People are using this to remap the short PTT button and long PTT button.
I have not looked at a Touch Pro keypad driver dll, so I don't know what shortcuts it's looking for.. but that's one idea
Oh great thanks for the suggestion, but aside from a registry editor, I'm not familiar with other programs which alter how the TP works.
Is command line similar to "Run-->cmd" on windows?
Also, I got my phone in Hong Kong; English OS with the Chinese software installed; it's an unlocked phone so dunno if that will make a difference with your suggestion.
Are there other programs similar to PQzII; like many others have said, the keyboard would be SO much more useful if it can be mapped. Thanks again.
Yes, the command line for a shortcut behaves the same as Run -> Cmd on windows, you provide arguments in the same manner: programname.exe -argument
So if you could find a program that would switch writing languages with an argument like -Chinese and -English, you could create a shortcut .lnk with that command in it.
Then, name it to whatever the keypad.dll is looking for, and it would execute that command instead of the default one.
If you'd like me to look into this further, I can disassemble the keypad.dll and determine which buttons can be remapped in this manner (on the fuze it's Music, SMS, IM, CV, Contacts, Calendar, Messages, Web, Long/Short Power, Long/Short PTT)
Great, thanks for the offer, but no need to do that. Seems like it'd take a good deal of time unless you feel so inclined to haha; perhaps I'll try PQzII again or maybe not.
But anyways thanks again!
I guess a question to everyone else that switches between typing languages...how do you change languages? Do you have a shortcut or do you also, like me, change languages through the SIP menu?