So, I got me a nice google voice number and loving the service, except.... for some reason I can't press '1' when I get the call with call presentation. If I press '1' the caller here's the touch tone, and then the call is dropped.
Pressing '3' (listen in during a voice mail) and pressing '2' works (send straight to voice mail), but I can't get '1' to work. Very, very frustrating. Anyone else experience this problem?
I'm have a xv6800 through Verizon that I've flashed a DCD Rom on. I'm using Minimal Dialer.
Related
Hi all,
I've been running TNT 1933 Touchflo for a few of days now, and everything works like a champ.
I do have a question though regarding bluetooth with MS Voice Command 1.6. When I click the button on my bluetooth headset, the phone screen (dialer) comes up, but that's all that happens. I read around, and saw that I may need to change some registry entries. However, my registry entries seem fine:
HKLM\Software\OEM\Voice Command\Path = \Program Files\Bluetooth Voice Command\BTVCBasic.exe
HKLM\Software\Microsoft\Bluetooth\AudioGateway\BTA GExtModule = \Windows\btagext.dll
I ran the program in the Path of the voice command (manually, just by clicking the file), and it did exactly what I needed it to do. The only problem is, that program isn't run when I click the button on the headset. I have a G3 Wizard, IPL/SPL 2.26 with 2.19.11 radio rom (not that it matters). Any suggestions?
Much appreciated.
Up you go! (aka, *bump*)
Come on guys, some of you gurus know this.
Aww come on.
I have At&t Tilt & a Jabra 250v bluetooth headset
Everyone says if I want to Listen to my Videos or Music
I need to get a Sterobluetooth for it
But I was listen to my Videos & I dont know how but could hear its audio
on my Jabra 250v & I know its not a Stereoheadset,
But it happpend,
Ca someone Help me
I want to know how it is possible & how i could set it
cos i dont like the stero headset, & be walking with 2 headphones on each ear
I prefer not to carry around a extra stereo headphone
& use just one,my Jabra 250v
well all i can tell you is i am currently running a Wizard and a Jawbone together im running TNT1933 HTC/Professional
voice dialing thing might mean you are using the old voice dialer... did you change it so that it uses MS Voice Command if not (go into START --> SETTINGS --> Buttons) mine is setup like this
Button 1 Messaging
Button 2 Internet Explorer
Button 3 Camera
Button 4 Voice Command
Button 4 (HOLD) Record
Button 5 Comm Manager
make sure voice command is set to button 4...
the phone screen (dialer) when i read this i am thinking the old version of the phone dialer the one that came with the wizard nativly... if you mean the voice commander MIC icon then say it like that cause it makes no sense... i was able to use this after i installed Voice Commander, changed the button and Added the bluetooth device then reset the unit... after that everything worked great...
I'm also running a Wizard paired with a Jawbone and am currently flashing over to NBD 8.3. I would rather use BlackDiamond 3.1, but it seems that Voice Command doesn't like BD. I may just end up cooking my own ROM that will work with VC, I just wish BD would. It's a stable ROM (once you kick some of the bugs out), and I like the "wow" factor of the Cube when ppl check it out...
dasaint said:
well all i can tell you is i am currently running a Wizard and a Jawbone together im running TNT1933 HTC/Professional
voice dialing thing might mean you are using the old voice dialer... did you change it so that it uses MS Voice Command if not (go into START --> SETTINGS --> Buttons) mine is setup like this
Button 1 Messaging
Button 2 Internet Explorer
Button 3 Camera
Button 4 Voice Command
Button 4 (HOLD) Record
Button 5 Comm Manager
make sure voice command is set to button 4...
the phone screen (dialer) when i read this i am thinking the old version of the phone dialer the one that came with the wizard nativly... if you mean the voice commander MIC icon then say it like that cause it makes no sense... i was able to use this after i installed Voice Commander, changed the button and Added the bluetooth device then reset the unit... after that everything worked great...
Click to expand...
Click to collapse
Hi,
Thank you for that, my buttons are set up precisely like yours.
By phone screen, I mean the one with the TNT logo at the top left-hand corner, along with a headset icon. This is the same thing that pops up when I click the green phone button. Note that this is NOT the voice command mic icon. When I click the button on the headset, I want the mic icon to pop up and take a command.
Any suggestions?
I had a weird thing happen,...
The hangup button will not shut the screen off until you add, then remove the additional "Inbox, messaging, and calendar" today items. Once they have been added, then removed, you can now push the hangup button to make the screen go off. A slight annoyance for a fresh install, but easily fixable.
Now I've got an issue with the Dial Lookup... The phone died (out of batteries) and now, instead of Dial Lookup, I have "Tasks" The actual Dial Lookup item IS Tasks.. it's the weirdest thing ever. If I have only the Dial Lookup and Tasks for my Today screen, I have 2 Tasks..
Any Idears?
WM6, using the HTC Home "Plugin"
the tasks bit happened to me. I fixed it by changing the value of the "type" in the registry back to 4.
I also noticed with HTC X-Button (only v1.5 would behave) it would keep the Send button from working. Couldn't bring up the dial pad, had to enter the contact's name with dial-lookup and press the select button to call out.
So instead of X-Button (which I love on my HTC 8525) I put Magic Button on my Treo 750 and it seems to work fine.
i have the same problem with HTC home plugin.
and also with magic button (after 2 days using it).
uninstall didnt fix the problem. I had to hard reset the device to make my send button and the hang up button working properly again.
My elderly mother-in-law has a wm6.1 smartphone (TMo Dash) and recently got a bluetooth headset. As with most headsets, a single click of the "call button" on it answers or initiates a new call. The problem is she continues to accidentally hit the very sensitive call button and makes call to the most recent number in her call list. Is there any way to prevent a single tap of the call button from automatically dialing the last caller on the phone end (perhaps via a registry edit). I dont know if this is specific to the Dash wm6.1 ROM, or a feature with wm6.1 in general.
BTW, click and hold of the call button activates voice command. It would be great if a single click would activate voice command.
Any suggestions?
Cyberon Voice Command usually takes 1 click to open voice dial and a long click to dial the last number.
I wanted to get rid of voice dial and i managed to do that but i still can't get rid of that "accidental dialing" thing you're talking about.. so i call people and they get to talk to my thigh once or twice a day
One click for Voice command would be OK for her, because VC would just wait for a command then give up. Unfortunately, her phone has one click for last number redial, and long click to activate Voice Command. She is always accidentially clicking the bluetooth button whenever she is handling it, and for some reason I'm the one it calls. When I answer, she usually has just put the thing in her ear and did not realize she called.
I wonder what controls the BT functions, and how these two phone have it differently.
look for Cyberon Voice Speed Dial.
that'll grant you what you wish for
I have a problem with dialer. I can't make a call directly from contacs list. I have to touch twice related number. When i push the call button, menu retuns to call hystory.
I have an orange M1000 PH10A running Wm 5.0 OS5.1.195 Build 15698.3.5.0 rom 3.50c.40CS Radio 1.18
I seems to work fine and can recieve calls and send calls from the contacts.
But when i go to the screen where the dial pad should show, I cannot see the keypad.
If I press where the numbers should be, I can hear the bleep but nothing on the screen.
Is there anything I can do to make the keypad reapear.