Related
Hello,
I see that some persons have problem with joystick not working at when C600 is updated to WM6. Me too. I have tried several WM6 packages and result was always thesame: joystick does not work almost all times. After downgrading to WM5 everything is OK. Since it sometimes works I assume that it is not a problem of keyboard mappings. Otherwise it would nto workl sometime. Is it driver issue? Does anyone has any clue? I searched forums and found none resulution to the problem.
I used the "Perfect English" wm6 upgrade, and my joystick works fine on my Cingular 2125 (Faraday). I see they have an even newer one now:
http://karhoe.byethost33.com/index.php?option=com_content&task=view&id=21
WaSyL said:
joystick does not work almost all times
Click to expand...
Click to collapse
What does that mean? It almost never works, or doesn't work all the time?
What was the most recent ROM you were using?
Nitro's and vjgrace's should work with little problem.
Are you using auto keylock? Try turning it off and turning your phone of and on.
Did anyone get it to work on wm6.1? i install it and it installs, but when i try to go to settings it will not go any farther. I like to have in say whos calling. Its a feature i can't live without! any help would be appreciated!
wolfskin
I think this is a problem when using the "official" 6.1 base. When I load it, it freezes after the install (like when it tries to load the "Help" file) and I must SR the phone. The next boot will be fine until it seems to start the Voice Command program, at which point will freeze the device. I had to hard reset to recover.
Others have reported Dutty's and other 6.1 releases not based on the "official" ROMs work with Voice Command.
i have it installed, haven't noticed any problems or than it needs to be tweaked to anounce calls. all other features, buttons, menus work.
i cant resist this one
READ THE FORUMS
http://forum.xda-developers.com/showthread.php?t=365118&page=6
1.6.1722 works out of the box for me, even launches from the headset. HOWEVER, it totally doesn't recognize ANYTHING I say! Totally the opposite of my normal experience. Normally I have to install ZaJules BTCommand, enable, reset, disable, reset to get the headset launch to work.
Hmm, I'll have to try another version.
***Update***
after radio update it is working PERFECTLY! Also it does seem to make a big difference which minor version of MSVC you're using - 1.6.17913 is what I have, my manager has 1.6.4xxx and his won't work from the headset after trying all my common tricks (although he's on Dutty v4, not 6.1)
Mine works with Schaps...
I am the same way, i must have MSVC for my blutooth carkit...Schaps is the only one i could get it to work well on; however, I din't try it on Dutty's
Just Tested on Alex's WM6.1 Home BETA 2
Works Great.
No problems...works on WM6.1
OK Guys... Do this test... Press and say "play music", it will ask you by saying "what do you want to play?", say "Anything" ( one of the choices), and let me know if it works.
I have dutty V3 and it works fine. On any wm6.1 rom, it will freeze. That is what I am experiencing with VC.
Same Here, no issues (Except the caller id anouncement)
Works fine for wm6.1 and its fine with my parrot carkit actually bluetooth audio much much better now
WM6.1 VoiceCommand 1.6 US
Works fine here - in fact BETTER than with original TYTN release where it would often hang just after hoing the lookup till you hit the Red Phone Key.
Now that it sounds like BT volume is better with 6.1, has anyone taken the time to compare registry settings between WM6 and WM6.1 to see what the differences are?
asking it to play music, and than anything works for me, no issues.
Laubscherc said:
Same Here, no issues (Except the caller id anouncement)
Click to expand...
Click to collapse
Did you go into Settings-Personal-VC and check "announce incoming callers"?
Mine is working completely without any hacks.
In the official 3.03 used in Alex's 6.1 Beta 1, MSVC didn't work for me, crashed the settings.
Now with Alex's Beta 2 he used official 3.02 and MSVC works perfectly.
asfoor said:
OK Guys... Do this test... Press and say "play music", it will ask you by saying "what do you want to play?", say "Anything" ( one of the choices), and let me know if it works.
I have dutty V3 and it works fine. On any wm6.1 rom, it will freeze. That is what I am experiencing with VC.
Click to expand...
Click to collapse
I am experencing the same issue,
I have dutty V4 and it works fine. On any wm6.1 rom, I get the Voice Command.asx error message (The file Voice Command cannot be open. Either it is not signed with a trusuted cerification, or one of it components cannot be. found. If problem persists, try reinstalling orrestoring this file). Ireinstalled several this and soft reset also, but the issue still remain.
Help!
MELPHBOY said:
I am experencing the same issue,
I have dutty V4 and it works fine. On any wm6.1 rom, I get the Voice Command.asx error message (The file Voice Command cannot be open. Either it is not signed with a trusuted cerification, or one of it components cannot be. found. If problem persists, try reinstalling orrestoring this file). Ireinstalled several this and soft reset also, but the issue still remain.
Help!
Click to expand...
Click to collapse
Use Kaiser Tweak in disable the trusted certification.
alltheway said:
Use Kaiser Tweak in disable the trusted certification.
Click to expand...
Click to collapse
Not true....
The Voice Command.asx is NOT part of Kaiser Tweak Menu. There are only two certificates to disable or enable. Even if you were to disable both the WiFi certificate announcement or the BT Certificate announcement, the VC.asx certificate right violation still shows when you request or command the VC, and will not respond to the command.
Did you locate the certificate disable/enable on your phone Kaiser Tweak before you decided to post your response?
Unless you can prove me wrong, I AM WAITING.........
pkley said:
1.6.1722 works out of the box for me, even launches from the headset. HOWEVER, it totally doesn't recognize ANYTHING I say! Totally the opposite of my normal experience. Normally I have to install ZaJules BTCommand, enable, reset, disable, reset to get the headset launch to work.
Hmm, I'll have to try another version.
***Update***
after radio update it is working PERFECTLY! Also it does seem to make a big difference which minor version of MSVC you're using - 1.6.17913 is what I have, my manager has 1.6.4xxx and his won't work from the headset after trying all my common tricks (although he's on Dutty v4, not 6.1)
Click to expand...
Click to collapse
What radio did you upgrade to ? just tried all 3 and still doesnt work for me
I installed Dutty ROM Duttys_Official_WM6.1_Rom_5.2.19716_UC si radio KAIS_Radinly_1.64.08.21, also iGo installed. I can't use my iGo program because when I try do detect the GPS chip from statellits connection page the PDA freeze when discover it (i can see this because the GPS led turns on). I can tell you that I update already the position using QuickGPS and after that GPSTool I can connect to sattelits. What shoud I do?
Thanks a lot
firsthtc said:
I installed Dutty ROM Duttys_Official_WM6.1_Rom_5.2.19716_UC si radio KAIS_Radinly_1.64.08.21, also iGo installed. I can't use my iGo program because when I try do detect the GPS chip from statellits connection page the PDA freeze when discover it (i can see this because the GPS led turns on). I can tell you that I update already the position using QuickGPS and after that GPSTool I can connect to sattelits. What shoud I do?
Thanks a lot
Click to expand...
Click to collapse
Search this forum for thread's called iGO and WM6.1.
The answers are in those posts.
Kyphur, use ur hammer...
firsthtc said:
I installed Dutty ROM Duttys_Official_WM6.1_Rom_5.2.19716_UC si radio KAIS_Radinly_1.64.08.21, also iGo installed. I can't use my iGo program because when I try do detect the GPS chip from statellits connection page the PDA freeze when discover it (i can see this because the GPS led turns on). I can tell you that I update already the position using QuickGPS and after that GPSTool I can connect to sattelits. What shoud I do?
Thanks a lot
Click to expand...
Click to collapse
Disable the HTC Home clock and see the IGO program work like a charm.
You did not read.
You did not learn.
You started a new thread
And for that you must burn.
This goes in the thread
For the ROM that you mentioned
This thread will be locked
And you sent to detention.
There's a link in my sig
In that nice quote from Alex
You need to go watch it
To avoid violent malice.
jarek91 said:
You did not read.
You did not learn.
You started a new thread
And for that you must burn.
This goes in the thread
For the ROM that you mentioned
This thread will be locked
And you sent to detention.
There's a link in my sig
In that nice quote from Alex
You need to go watch it
To avoid violent malice.
Click to expand...
Click to collapse
WTF is up with you. LMFAO. Now you're a poet? LOL
jarek91 said:
You did not read.
You did not learn.
You started a new thread
And for that you must burn.
This goes in the thread
For the ROM that you mentioned
This thread will be locked
And you sent to detention.
There's a link in my sig
In that nice quote from Alex
You need to go watch it
To avoid violent malice.
Click to expand...
Click to collapse
Too much thought went into that Jarek.
Still LMAO though.
I searched, and searched again, and again... no fix for me
I don't want to eat your time... but my iGo still not work. I don't have HTC Home active... I tried even to enable and after that disable this function, but... no result...
This is serious...I can't use my GPS with iGo program....Any suggestion or fix?
Thanks again
firsthtc said:
I don't want to eat your time... but my iGo still not work. I don't have HTC Home active... I tried even to enable and after that disable this function, but... no result...
This is serious...I can't use my GPS with iGo program....Any suggestion or fix?
Thanks again
Click to expand...
Click to collapse
Go Here
http://forum.xda-developers.com/showpost.php?p=1956279&postcount=2328
And If you have more questions maybe put it in the relevant thread. HERE
Also I think you may have a burned up GPS chip. Try a different GPS program. GPSTest or something. But It would be better if you posted in the Thread that deals with Problems in the rom you are using.
two suggestions:
first: see if u have a-gps enabled. if so: disable and try again
second: try another rom... find one that's best for you.
i dont see how htc home plugin can affect this because i tested all possible combinations w&w/o it enabled and nothing changed. I had the same issue, igo freezing with dutty's wm 6.1 ROM when configuring and turning off assisted gps helped, as stated above.
My GPS worked fine with iGo until I changed the ROM (I had Dutty's ROM nr. 4). And that link that you give me, Jimmy, is related to HTC Home. I don't use it, like I said before.
Help please...
Still no answer... any ideea? Thanks
firsthtc said:
Still no answer... any ideea? Thanks
Click to expand...
Click to collapse
I'm not sure it's a ROM problem. iGo 6 itelf seems to have a problem dealing with AGPS. Mine also freezes after a while if AGPS is turned on.
I just leave it off and everything seems to work fine.
/drt
one thing i did was turning off the igo today plugin..and reboot..that should partially remove the conflict..
There are actually three different kinds of iGo problems I've seen with the various ROMs I've tried:
- Installation won't complete. Often, iGo will run anyway if you just do a soft reset when the installation halts. Often it won't.
- iGo runs, but once configured to find the GPS COM port, it hangs and hangs every time it starts after that. It may be related to AGPS, but I've seen this in ROMs that do not have that enabled by default. Also, I have no data plan and, as a result, no data connection with the tower.
- iGo installs, but won't start at all. Trying to start it results in a little screen opening animation, but nothing appears. The device is sluggish for a moment, then it's as if you never attempted to start it at all. This is the problem I have with Dutty's latest ROM. This almost certainly not related to AGPS since iGo has no GPS configuration immediately after installation. I don't believe it is related to the HTC Home plugin, since iGo runs fine for me on the AT&T test ROM, and it has the plugin.
sinanju said:
- iGo installs, but won't start at all. Trying to start it results in a little screen opening animation, but nothing appears. The device is sluggish for a moment, then it's as if you never attempted to start it at all. This is the problem I have with Dutty's latest ROM. This almost certainly not related to AGPS since iGo has no GPS configuration immediately after installation. I don't believe it is related to the HTC Home plugin, since iGo runs fine for me on the AT&T test ROM, and it has the plugin.
Click to expand...
Click to collapse
This is definitely a conflict with the music tab of HTC Home, but only on some 6.1 ROMs (curiously not build 716 though). This problem doesn't occur in any 6.0 ROMs that I know of. It's not the plugin per se, but some component of the Today screen configuration that's causing the problem.
rob.ocelot said:
This is definitely a conflict with the music tab of HTC Home, but only on some 6.1 ROMs (curiously not build 716 though). This problem doesn't occur in any 6.0 ROMs that I know of. It's not the plugin per se, but some component of the Today screen configuration that's causing the problem.
Click to expand...
Click to collapse
Is it sufficient to uncheck the plugin in the Today configuration and soft reset or is something more drastic required to resolve the conflict? The instructions linked to in an earlier posting seemed more like a series of black magic steps that happened to work.
I posted a couple of days ago but didnt really explain properly so starting again.
I have a touch pro, with romeos2 rom installed. I have tried the 1.51 and 1.60.1 builds.
the device pairs find, picks up phonebook etc fine. but i cant dial from the headunit. its driving me insane. I havent tried with other roms apart from romeos2.
Sometimes it will dial but only if you dial on the headunit then turn phone off and on. it seemed to work slightly better with romeos1.51 but still useless.
Does anyone have any ideas? meh... getting annoyed with this
p.s. i tried my friends touch HD and works perfectly, 100%. he has windows build 20757
UPDATE: incase anyone else is having issues
Monx (romeos2 legend) has asvised to try installing the BTSAP profile when using his rom. I havent tested yet but will try tonight.
What i did find is that I tried the windows build my friend had and that didnt help, issue was the same. I tried another radio 1.02.25.31, same problem only worse. then tried flashing RRE 3.1 fuze rom and at the same time 1.08.25.20M1 radio. Now the phone works in the car, responds to headunit dial requests.
New problem is that it doesnt download phonebook to the headunit.
will keep posted on progress if anyone is having this problem
same here, im running Romeos 1.5x final touch pro rom on my fuze.
paired fine, cant make phone call, the car shows no connection
i tried install BTSAP, BTSAP, BTBPP, doesnt work...
please help, i really like romeos rom
Its working!!! i reflashed romeos 1.60.2 and installed the btsap profile and its working.
I dont think its the btsap that did it as from what i gather the btsap is to access the sim card of your phone to use it remotely in another phone devide in a car stereo and i dont have that.
I think the think that fixed it was flashin the australia radio 1.08.25.20M1.
It responded instantly to dial requests and pairs fine!
teddyonair said:
same here, im running Romeos 1.5x final touch pro rom on my fuze.
paired fine, cant make phone call, the car shows no connection
i tried install BTSAP, BTSAP, BTBPP, doesnt work...
please help, i really like romeos rom
Click to expand...
Click to collapse
Try flashing the australia 1.08.25.20M1 Raphael radio and see if that works.
Also have you tried Jetware handsfree extensions? Some head units need this to work properly, and i think pioneer has issues if its not used.
1.08.25.20M1 ? I've been using this radio since they first posted it here.
so i dont think its the radio thats blocking it
any other suggestion?
btw i have a kenwood navigation with bluetooth add-on. works fine with my tilt and all the other phones.
thanks in advance...
teddyonair said:
1.08.25.20M1 ? I've been using this radio since they first posted it here.
so i dont think its the radio thats blocking it
any other suggestion?
btw i have a kenwood navigation with bluetooth add-on. works fine with my tilt and all the other phones.
thanks in advance...
Click to expand...
Click to collapse
did you try the Jetware handsfree extensions? http://www.jetwaremobile.com/index.htm
well after all that, i hard resetted my device again to setup up from scratch, tested with new radio and it didnt work.
Sooo... installed the BTSAP profile and working fine so looks like that was the cause of my problems all along
thanks for testing that for us...
i installed BTSAP in my fuze still no luck...hopefully more people will come in and share with us how their setup works
well after all that mine isnt actually working properly arrrrrrgh
I just did few tests as have been messing with phone at work then quickly testing on breaks. anyway basically if the phone is on it seems to work fine and connects/dials calls perfectly since installing btsap....
however.... if the phone goes in to standby for a length of time it doesnt wake up when i try and dial from the headunit. If it then turn the phone on again it will start dialing.
This is totally 100% doing my head in as just spend bloody 90 quid on the bluetooth thing for my car
Anyone got any ideas why it wont wake up when dialing from bluetooth handsfree? The dial command obviously got to the phone as it starts dialling when you take it out of standby.
HELP! lol
Glad to see I am not alone in this. What a pain! Can someone tell me where to download the BTSAP cab? I will try that and jetware to see if it helps. I have a Kenwood head unit that also allows for SMS via the head unit but it doesn't work with my Fuze. Anyone else have that feature working?
Thanks
Hi.
I have just installed Tomtom (vga-version) on my Touch Pro and found, that when trying to enter an Adress with the slide-out Keyoboard an aditional character is added after each pressed button. This Means: i press "a" and "a°a" appears on the screen.
Does anyone else have the same problem or maybe found a solution?
Never noticed that problem before. Using last version of TT7. Maybe a rom issue with the keyboard driver.
Usually I'm using the soft keyboard of TT7
Pizzamaka said:
Hi.
I have just installed Tomtom (vga-version) on my Touch Pro and found, that when trying to enter an Adress with the slide-out Keyoboard an aditional character is added after each pressed button. This Means: i press "a" and "a°a" appears on the screen.
Does anyone else have the same problem or maybe found a solution?
Click to expand...
Click to collapse
This is also happening to me, stock WWE updated ROM with TTN7 7.915. This is soooo lame!
fun_key said:
This is also happening to me, stock WWE updated ROM with TTN7 7.915. This is soooo lame!
Click to expand...
Click to collapse
I can also confirm that this is happening to me with TT 7.915. I'm not completely sure, but I don't think it happened to me with TT 7.910
Do you all use the vga-version? I think it did not happen with the not-vga version that was preinstalled on my device.
I tried with 910 and 915, and I still get this issue :-/
Its hapening to me also. im using TT7.450 (VGA)
Buts not a problem to me. Tomtom is very fingerfriendly and it goes very smooth.
On a slightly different issue, what sort of refresh rate are you getting on TomTom in terms of map redraws per second? I'd guess I'm only getting one, maybe two, but I've seen Sleuth's video, and he looks to be getting 3 or 4.
Any ideas?
Cheers,
Steve.
I also have this issue, although I never use the keyboard while navigating. If you didn't mention it I would have probably never noticed it! LOL
@maw: Well I bought a PDA-holder for my car which holds the Touch pro with the open keyboard, since I thought, that it would be really cool (which it is if it wasn't for the keyboard not working properly in tomtom)
@StevePritchard: I am not sure, but I think I get about 1-3 fps in Tomtom.
did you upgrade your ROM and noticed this problem? As I never used the keyboard with the previous stock ROM I can't say if the ROM upgrade effected the Tomtom interface with the keyboard. I updated my stock ROM with the new version that just came out. Maybe that is the problem, I don't really know.... Very good of you to signal this problem though. Otherwise I don't think this problem can be fixed, I guess we'll just have to wait on a new version of Tomtom to fix this problem. Have you reported it to Tomtom?
no I did not upgrade. I didn't even know, that there is an available update. I am running the stock rom (from o2 germany) that came shipped with the phone.
Is there an update from htc?
No, I did not report, since my Version fell from a truck... I was just wondering whether it was damaged during the fall or if everyone has this problem. ;-)
Pizzamaka said:
Hi.
I have just installed Tomtom (vga-version) on my Touch Pro and found, that when trying to enter an Adress with the slide-out Keyoboard an aditional character is added after each pressed button. This Means: i press "a" and "a°a" appears on the screen.
Does anyone else have the same problem or maybe found a solution?
Click to expand...
Click to collapse
Its a TomTom error, the newer TT versions dont have that problem.
I used to get this when running Elite RC2 - I moved to ROMeOS and never had the problem
komani86 said:
Its a TomTom error, the newer TT versions dont have that problem.
Click to expand...
Click to collapse
What do you mean by newer versions? I use 7.915 - Is there anything more recent?
I'm getting the same problem, and I've got 7.915 as well. No-one found a solution then?
i had this problem on 3 different versions of tomtom, along with hit or miss signal. it always thinks im inside a building but in the 1/20 shot it works i cant do anything or else "im inside a building" again. i just dont think tomtom was meant for the fuse
It is not a TOMTOM issue. It is an issue with the IME. Here is the fix.
I have attached KforTouchPro_v1.0.0.3.CAB
1. Install the cab
2. It installs to your games folder because this is a fix for several games that have had this issue (I originally discovered it because I had issues using the HW keyboard with logmein)
3. click the Switch to M$ IME button. Now you are good to go!
Thanks - I have just tried it, and TT now works fine.
The problem now is, that other things don't work anymore... I tried writing an E-Mail and it wouldn't let me abort the mail. It displayed the Messageboc, but did not accept any input. Since I write more Mails than I use TT and don't like to keep on switching Keyboard map I is not a real option.
Do you have any Idea?
Hmm.. odd, when I updated my TomTom it just disappered, I have your version aswell, good that there is a update though for you
that K for touch pro, is that KforRaphael that maps certain keys for MorphGear?
I had that installed, but cant recall if it was erroring before that, anyways, good it got solved