Hello, I am using O2 XDA Stealth, and try to find around but I can't find a solution of this. When in sms mode, I want to use it's build in keypad for text input which is Nokia like, but it doesn't let me input letters but only numbers. Any solution please? (Not T9 on-screen keypad, but physical phone's keypad) Thank you guys.
answer
hi
press and hold the * key to switch to Multi-Tap. Then you can do it like nokia.
Change your input type to eZitext, rather than keyboard.
is any other program better than the ezitext?
this information is very helpful..thanks
Anyone knows how to remove this black banner
When i type a recipientname i only get one name and this black banner
also with the message i type
disable xt9 and word suggestion
I did disabled the word completion, bud where to complete disable te xt9 ?
input methode => touch keyboard => i remove the checkbox there
Weird thing is, it doesn't show up every time you use the keyboard. In one screen it does and in the other screen it doesn't (or I'm blind).
The settings you changed should work I think.. lemme see:
start -> settings -> input -> *select 'Touch keyboard' from list* -> options -> XT9 settings.
In the XT9 settings you can turn off word completion etc.
However, I'm not sure if that also turns it off for the normal keyboard. I would assume it does, but you know what they say about assumptions eh
After this regtweak
HKLM\SOFTWARE\Tegic\eT9\
and change the key "XT9SupportMSSip" from value "1" to "0"
The black banner bellow is gone for keyboard input, the input sms recipients its still there and have only one name instead of the hole list with email names.
Try this. Will Disable xt9
Works great thanks
I have exactly the opposite problem - Word Completion doesn't work at all even though I set ip up several times in the "Input" menu (in "Settings").
Any suggestions??
Thanks.
John_A said:
Try this. Will Disable xt9
Click to expand...
Click to collapse
Hi Im new here... been wanting to disable the XT9 input from htc touch. Will the attached above work on htc touch 2nd gen? thanks!
Blackfire said:
After this regtweak
HKLM\SOFTWARE\Tegic\eT9\
and change the key "XT9SupportMSSip" from value "1" to "0"
The black banner bellow is gone for keyboard input, the input sms recipients its still there and have only one name instead of the hole list with email names.
Click to expand...
Click to collapse
Does that also disable T9 for the Touch Keyboard and Keypad?
Hi, I tried this CAB file and it works for the DUAL. May be you guys can give it a try. I got it from the HTC website. Good Luck!
Hi, I've also been irritated by the new XT9 on my HTC Touch Cruise. I have managed to stop the XT9 black bar coming up when using the standard jeyboard, but how do I get the original windows word suggestion to come back up? I have become very fast at using the windows word suggestion on my old HTC Artemis and like how it suggests a word but does not replace the one you're typing before you click on the suggestion.
Swidge said:
Hi, I've also been irritated by the new XT9 on my HTC Touch Cruise. I have managed to stop the XT9 black bar coming up when using the standard jeyboard, but how do I get the original windows word suggestion to come back up? I have become very fast at using the windows word suggestion on my old HTC Artemis and like how it suggests a word but does not replace the one you're typing before you click on the suggestion.
Click to expand...
Click to collapse
I would like to know this aswell, I become very fond of this on my Orbit 1 (artemis) and liked that it learned words that you used frequently.
Exactly, I had the Orbit 1 and have now upgraded to the Orbit 2. The way it learned words was great, but it didn't interfere with what you were typing. I'd rather it assumed I was correct and let me choose when to go with it's suggestion.
Ah ha! I have managed to rid myself of the XT9 and get the nice old native pocket pc word suggestion back!
I installed PocketCM Keyboard. That's it.
As I was typing on the new keybaord I noticed word suggestions coming up as well as the PocketCM Keyboard suggestions. I then swithced back to the standard keybaord and the classic word suggestion was back! I went into word suggestion options and changed it to my favourite settings and hey presto, it's working as good as the old one was. It also gives me the nice standard list of contacts when typing a name into my SMS 'to' field. Fantastic.
I don't know if it was a fluke or if it would happen every time you install PocketCM Keyboard, try it out. I don't know if you can get the XT9 back though, and the XT9 doesn't work for the touch keyaord and keypad now either rendering them practically useless, so be warned.
I also haven't reset the phone since this discovery so i don't know if it's permanent, but, crossed fingers...
Swidge
Blackfire said:
When i type a recipientname i only get one name and this black banner
Click to expand...
Click to collapse
You can scroll through the available recipients at this time by using the scroll wheel.
How I can completely swich off Touch keyboard and Touch keypad?
Henry100 said:
How I can completely swich off Touch keyboard and Touch keypad?
Click to expand...
Click to collapse
I don't know of any way to switch off the touch keybaord and keypad, but you can switch to another keyboard easily enough. If it's the black bar with predictive text in it you can switch it off pressing the XT9/ABC button on the touch keyboard, then using the keyboard of your choice. However this does not replace the XT9 predictive tet with the old style word prediction. The only way I found to do that was to install PCM Keyboard. I don't know why that reactivated the old style word prediction but it did.
Also, in addition to my previous post, i have reset my phone a number of times and the old style word predition has stayed. It seems to be a permanent solution, even if i don't know why it works.
I hope that helped.
Swidge
Thanks Swidge. You are awesome!
noooo....
i have the reverse matter
i want to display that black banner....but the version of HTC Keypad+Keyboard I've installed won't do that....
arggggg...
someone can suggest me an htc keypad+keyboard cab with this black banner???
plese i need it
I have mio A702
but it doesn't have the 5 ways keypad
Is there a software can make the numerical keyboard became the 5 ways keyboard??
or how to re assign the numerical keypad???
some software cannot operate without it
I really need it
Please Help Meeeeeeee.......
Thanks Before
Hello,
For the i780 wich also doesn't have a physical 5-way directional keypad (but an optical one), there is a program called 780cursor, wich turns your R,D,G,C,F keys in a directional keypad. I don't know if this will work on your machine (if you try it, try it at your own risk!), but for i780 this works great.
Manchurian
thank you very much !!!!!!!!! Manchurian
This works great.
Okayy ive got a problem with my htc touch pro keyboard.
I had just brought my touch pro (brand new) recently and i have been looking all over the internet trying to find a solution to my problem. .
My hardware keyboard is all wrong, the letters are fine, but its the numbers i am having a problem with.
for example, when i press number "1" it will bring up the start menu, when i press number "2" the "@" symbol will come up, when i press number "3" the underscore symbol will come up. and so on.
I had looked at every single setting on the device and no luck.
. i was really disappointed and i couldnt do anything about it.
Could anyone please help me.
Thanks In Advance
Wuchacarlse.
Read this: http://forum.xda-developers.com/showthread.php?t=545005
touch pro? Did i miss something?
Not a developmental question nor saphire, thread moved
Install this cab and select touch pro keyboard, sounds like yours is set for a Fuze keyboard.
http://forum.xda-developers.com/showthread.php?t=490290
hehe. thanks for a solution i guess. but how was my keyboard set to fuze? shuldnt it already be set to touch pro?
thanks in advance
wuchacarlse
can u help my problem?? i have polaris 2nd hand
my polaris dont have "touch keypad" & "touch keyboard" at input panel. how to solve this problem. thx
hellloo...
Do first soft reset, if don't help do a hard reset. I have same problem after installing new Rom, after restart the keyboard was fixed.
I can't too. I installed Touch-keyboard-keypad, Registry Enable HTC Keypad, as well as Finger Keyboard 2.1. I am able to select it, but it will return to normal keyboad. Touch keyboard and keypad shows not effect no matter how many times I'd selected it. I'd tried restart and restart, install reinstall.. it never seems to work. I went to SIP change too... everything seems ok while setting.. but the Touch keyboard and keypad never comes out.
Sigh... whole morning of setting it after flashing a new 6.5 rom... it's... really tiring...
I flashed another 6.5 rom before with those mentioned above, and it works well... im not sure.. why isn't it functioning this time.
anyone can help in this?