Hello,
I have an original Qtek S200,
I've searched on a lot of forums, but I can't find it.. hopely someone can give me the download links(of english version) and manual here...
The version i need is ROM version:
IPL 2.10.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.7.36
Thanks!
padamagarwal said:
Hello,
I have an original Qtek S200,
I've searched on a lot of forums, but I can't find it.. hopely someone can give me the download links(of english version) and manual here...
The version i need is ROM version:
IPL 2.10.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.7.36
Thanks!
Click to expand...
Click to collapse
Ok firstly don,t spam the forums with loads of post all with the same content as you will get your self banned then no one can help
Can you try this method and see what happens if this don't put your phone back to standard working condition then your problem could be Hardware related
DOWNGRADE TO WM5 WITH MANUALLY entering BOOT_LOADER MODE + flashing the NVID ROM
To manually enter boot mode hold camera button and press the reset button on the bottom of your device keep camera pressed untill the three colour boot loader screen is displayed
Then run the Rom Update Utility (G3 or G4 depending on your device type) and wait for the rom flash to finish (About 10 mins)
After successful flash do a hard reset to clear all previous data and settings let the phone boot and see if it recognises your sim
thanks
hi
Thank you for considering my request but where will i get rom utility or rom softwre. if u please help me then i may be able to use my cell.
thanks one again
padamagarwal said:
hi
Thank you for considering my request but where will i get rom utility or rom softwre. if u please help me then i may be able to use my cell.
thanks one again
Click to expand...
Click to collapse
well you have this thiing called a search did you try that well i can answer that no you didn't next time give it a try that's what it's for download this ROM and the ruu is with it
http://www.4shared.com/file/57952591/3955ed98/NVID_RUU.html?dirPwdVerified=2948f2e
Related
HI all
i have a qtek_S200(HTC Prophet) which is :
IPL 2.09.0001
SPL 2.15.0001
OS 2.15.13.24
GSM 02.17.21
now,i have experienced a big problem like this:
i wanted to change the ROM of my phone to English..then i download a shiped Rom to flash it...
the shiped Rom i used was RUU_Prophet_1001321_100013102_11320_DopodAsia_shiped.exe....
But everytime i tried to Flash, the program said "ERROR(300):invalid update tool..this update utility cannot be used for your PDA phone.please get newer update utillity" when the phone proceeded to a reseting and turned to three colour mode....
So, that is way? someone plz help me..
ThX
jimmy
2nd problem
the qtek S200 is CHT now, coz it ought to be ENG originallly, so it must be CID unlocked sometime ago...
unfortunlly, when i try to backup its Rom to SD card using MTTY by the code" r2sd all", like backing up a wizard' rom....but it said "you don't get the proper security level to download a specific image"..
Then i use the MachinaGod' lokiwizi and RapiUnlocker trying to unlock the CID, but it displays error and seems fail ..
so, guys plz help me ..
THX
jimmy
UP
Guys please help me
another: HOw to dump a ROM of Qtek s200(prophet)?
Hi,guys..
HOw to dump a ROM of Qtek s200(prophet)?
i tried to dump it's Rom using a MTTY, the code i input was " r2sd all", but it said that
Code:
r2sd all
*****user area size=0x77E0000 Bytes
R2SDBackup0-Download type=5
usTotalBlock=1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
So it is fail......
i want to backup it's Rom, then flash it onto other Prophet ...
Anyone pLz teach me how to do...
THX
jimmy
try to awizard 1.2 tool (It's on FTP in wizard folder or upload folder).
thefamous said:
try to awizard 1.2 tool (It's on FTP in wizard folder or upload folder).
Click to expand...
Click to collapse
i have tried but it is no use..
Jimmy:
You will need to downgrade the device to 1.x os.
See my comment here:
http://forum.xda-developers.com/viewtopic.php?p=283140#283140
I will add this to the wiki shortly.
I managed to successfully use the r2sd command after unlocking.
Let me know if you need anymore information.
Thanks
Pete
Rymez2K said:
Jimmy:
You will need to downgrade the device to 1.x os.
See my comment here:
http://forum.xda-developers.com/viewtopic.php?p=283140#283140
I will add this to the wiki shortly.
I managed to successfully use the r2sd command after unlocking.
Let me know if you need anymore information.
Thanks
Pete
Click to expand...
Click to collapse
hi ..thx for your help.
but..how to downgrade to JAMin_WWE_1000925_10009114_11420_ship.exe ? and what a hacked version of the rom update utility i can use? i mean expect JMFWM(the one need money.i don't like it).
can you please show me the detail steps...thank you very much.!
jimmy
jimmy80,
Have you try as discussed in this thread: http://forum.xda-developers.com/viewtopic.php?t=49298
I need to cid unlock my prophet(s200,jamin)
I tryed with the software in wiki-developers
but it makes problem does anybody help me by cid unlocking for chipshet for 0001
http://blog.neten.de/read.php?66
???????????????????????????????
A little bit difficult for us to understand the link you posted. Is possible to update in english? Thank you in advance!
yes please if this is a way to cid unlock a G4, can someone please translate?
not really a solution
I read the entire post. It is NOT a CID unlock, basically the guy just ran aWizard and ignored the error of CID unlock error. The screen says CID unlock success, but it doesnt really unlock CID. rest explains what roms he used to update his O2 xda. Mostly are in Simplified Chinese ROM. Nothing special or new in that post. Search is still on.
Kensu, thanks for your time!
If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!
abubasim said:
If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!
Click to expand...
Click to collapse
Has someone already successfully tried this procedure on a prophet?
inshar said:
Has someone already successfully tried this procedure on a prophet?
Click to expand...
Click to collapse
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.
abubasim said:
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.
Click to expand...
Click to collapse
I can confirm!
I have used the procedure tonight and all worked perfectly!
Enough simple and with no unpgrading problems!
Now I have Italian rom on my device!
Thanks for help!
Prophet ( Qtek S200)
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino
Merlino said:
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino
Click to expand...
Click to collapse
Yes that rom and the configuration is the SAME of K-Jam (i had a 02 Mini S before thiefed :-(( )
Thanks
Great !
It works... Thank you so much
Merlino
Hello all,
i'm new here and i dont understand something :
following this tutorial can i install on my o2 neo an italian 2.13 rom instead of the english 2.15 i am currently using?
in other words can i "down"date my rom from 2.15 to 2.13?
another question: wich is the best italian rom so far?
i've managed to find only a 2.13 around,are there any newest italian rom around?
thanks
Probably I made something wrong, my device is DEAD!!! I have been severals hours to fix it but no way.
Now I can see the device in boot loader mode (3 colors)
IPL 1.00
SPL 2.15.0001
How can I recover the installation?
You have missmatch in IPL and SPL version.
Your IPL is corresponding to DOC G3, but SPL DOC G4.
This should not be the case. What was your original DOC?
Do you have USB connection when in rainbow screen?
rgds,
fdp24
No, I don't have a USB connection. Tonight I was thinking and I going to try to put the ROM stop at bootloader. Let me try it now. As soon as I have some news I'll post it. Thanks!
I just finish to download the Dopod 818 Pro Rom stop at bootloader fix but now the problem is getting biger, I mean, the battery is empty, so I can not charge the device with the USB or AC cable. I have to find a battery to try with this Rom. Or go to the technical support and try to fix it.
The screen is on and of by it self efvery couple minutes (just for a while)
Finally I got a charged battery from my brothyer and I started to download the mentioned rom, but at 80% stop, I get an error message.
ERROR 326 Invalid Command. This NBF file cannot be used for your PDA Phoen. Please check your NBF.
How could I do? Suggestions???
I made a call phone to the service mantenience and I have a date to try to fix it. I'm affraid they are going to tell me something I don't like to heard, but...
Now I'm going to start a new life without my Prophet for a few days, or at least, hope so.
Hello
I Do Upgrade for my JAMIN with PDAMobiz_Prophet_WM5AKU3.2_v3220 & it was Succeed With out any trouble
Than I Try to upgrade to 2006-11-12_Prophet_WM5AKU2.3_lvsw_edition but my Phone Stack So I reset as say after 30 m (about 48m)
The Baggiest Problem for me after reset my Jamin Stack in Booting (Just show Rom Version & Other) after that noting Happen..
I tray to format But also same. I tray to boot from USB & Install Original ROM I get This Error
ERROR [296] UPGRADE ONLY
This NBF file connects used for your PDA Phone. Please get newer NBF file.
Is there any way to erase ROM and Re Upgrade with Old ROM
I Tray to Upgrade with Latest Update PDAMobiz_Prophet_WM5AKU3.2_v3231
But fail because this Upgrade required synchronization with Pc ..
Until now I lost Every Thing My Phone is Similar to Dead
Please help me
Please change your topic title so it makes sense!
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
mccune said:
Please change your topic title so it makes sense!
Click to expand...
Click to collapse
Sorry for my title ...
mccune said:
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Click to expand...
Click to collapse
I Don't know about CID
My SPL 1.2
My Device G3
mccune said:
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
Click to expand...
Click to collapse
I did it & connect to usb but when i execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 it's show me No Device Connect
Thanks for you
You had to CID unlock your phone first!
The only thing you can do I guess is install the NoVendorID Asia version for the Dopod.
You can't install the PDAMobiz ROM because there has to be an AS connection.
Try looking for: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip on the XDA ftp.
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
wa7eed said:
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
Click to expand...
Click to collapse
You should try to flash your device with the ROM mentioned before.
After that you can try to CID Unlock your phone:
Wiki for Prophet
The CID part
You're lucky you didn't brick your device
First Thanks for all
MY STORY
I try to flash my device with ROM RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID.zip and I was very happy because it’s start to flash ROM but after rich 95% it’s stop and show me Error INVALED COMMAND ... I tray many times but all same
Even my device now when ever I turn ON it’s go to boot loader mode
Correction my SPL 2.20
Just today I notice I write it wrong 1.2
Waiting for your reply...
Again Thanks
Thanks for you mccune so match for Help & all staff in this great forum already I restore my Live (I mean My Device)
I have to update to this ROM RUU_Prophet_220734_2207114_024721_NVID.exe
Thanks again for all
hi there
i am using imate jamin da problem with my cell is
i upgraded my rom to qtek 2.20000 it was working absolutely fine with 8 icons in my comm manager then i upgraded to RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-b1 and it has severely damaged my cell as my phone my phone hangs white booting it shows me the colour screen with
IPL 1.00 and SPL 2.20.0001
on the Screen
OS and GSM is not displayed
I tried rom update several times but its not working
i even tried to format my phone but it gives FAT16 format failed
I even tried to upgrade to jesters RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1 but still its not working and givng same problem
now i dont understand what to do
i just brought this phone from dubai last month its under warranty will imate people sort this problem ????
guys please give me Advice and solution for this IPL SPL Problem
Thanks in Advance
Hello, I feel sorry for your bricked Prophet but here some informations. First of all, there is no need to write in big red letters. This usually annoy people or make them feel offended. You are not more important than others - who have their own problems as well. Writing normally would usually give better chances for a reply.
Here some feedback for your problem :
a) As long as you can get back into the boot loader as long everything is recoverable (hold camera button and reset and keep the camera button pressed until you get into the boot loader with the different colors). As long as this is still there as long you can recover.
b) Get an official ROM from your service provider for your Prophet and flash it back.
c) Only problem you might have is the updated boot loader (2.20).
big red annoys me.
You did not try to flash your G3 phone with a G4 rom now did you? (or G4 with G3 rom..)
As Spatzm said: Try to get into bootloader. If that works try updating again with the official qtek 2.20 rom. (here). And READ that topic about how to install and get yourself the ROMUpdateUtility_NoID.exe from the ftp (see wiki).
Since you tried to update with the 2.20 rom (which is the base of Jesters rom) you cannot downgrade, that's why you need to use the 2.20 official qtek rom (which is suitable for both G3 and G4). You can only downgrade if you have a CID unlocked G3 (if you don't know if it's CID unlocked then it's not ) with a G4 device you cannot downgrade to put it down shortly.
Can anyone give me a spanish rom for flash kaiser?
thank's Andrea
ciassi83 said:
Can anyone give me a spanish rom for flash kaiser?
thank's Andrea
Click to expand...
Click to collapse
I have dumped it from the device, and have Part0-3.raw files, but don't know if it's possible to reconstruct and flash without the original OS.NB file.
Any help? Can i reconstruct using Spanish dumped ROM using WWE nb-imgfs files?
Thanks in advance.
Regards.
I don't understand is my first attempt to use this phone..
please help me.. please i don't want loose it!!
ciassi83 said:
I don't understand is my first attempt to use this phone..
please help me.. please i don't want loose it!!
Click to expand...
Click to collapse
Well, if you don't want to loose your TyTN II, you only need to power on, and start to using. Sure works for the most of you use it.
This forum is only to learn and have fun with the kaiser. So if your Kaiser works, don't touch...only read the user guide and that's all.
Read a lot is the only way to learn how to keep your device working
Regards.
please you are from spain and have the same kaiser..please help me to do a ruu for flash my device and turn it on..please..
ciassi83 said:
please you are from spain and have the same kaiser..please help me to do a ruu for flash my device and turn it on..please..
Click to expand...
Click to collapse
If you want to get some help, you need to give more details about your problem (if exsit...).
What have you done before the error happen? What is the error? What happen when you power on the device? What ROM version? What is the start secuence?
Without this info anyone can help you, believe me, peopple here are not magicians
-I launched kaiser ssplv1 on my kaiser
-then i executed RUU.Kaiser.HTC.WWE.1.56.405.5.radio.sign.22.45.88.07.1.27.12.11.Ship
-At 16% of flashing, processes stop and i follow RUU.Kaiser.HTC.WWE.1.56.405.5.radio.sign.22.45.88.07.1.27.12.11.Ship instruction for continue the processes, but now at 1% process stop cause invalid vendor id.
-Now when I started I see the 3 color band (red,green,blue) and these words:
kais130
spl-1.56.0000
cpld-8
--in top right there is written RUUNBH
This is all..do you need anymore information?
please don't hurry with me..i'm afraid for this situation..
ciassi83 said:
-I launched kaiser ssplv1 on my kaiser
-then i executed RUU.Kaiser.HTC.WWE.1.56.405.5.radio.sign.22.45.88.07.1.27.12.11.Ship
-At 16% of flashing, processes stop and i follow RUU.Kaiser.HTC.WWE.1.56.405.5.radio.sign.22.45.88.07.1.27.12.11.Ship instruction for continue the processes, but now at 1% process stop cause invalid vendor id.
-Now when I started I see the 3 color band (red,green,blue) and these words:
kais130
spl-1.56.0000
cpld-8
--in top right there is written RUUNBH
This is all..do you need anymore information?
please don't hurry with me..i'm afraid for this situation..
Click to expand...
Click to collapse
Seems you have a briked kaiser... take a look at http://forum.xda-developers.com/showthread.php?t=334693 to see if helps you getting info about your kaiser CID version...
I suppose you have an Spanish Kaiser, right?
So seems the only way to recover is flashing spanish Kaiser ROM (that we haven't).
The other way is sending to repair...
Other info:
HTC TyTN II Kaiser (Kais130)
Rom: 1.56.412.4
Date Rom: 08/28/07
Radio: 1.27.12.11
Protocol: 22.45.88.07W
so I say you canhelp me..you have my same rom..
ciassi83 said:
Other info:
HTC TyTN II Kaiser (Kais130)
Rom: 1.56.412.4
Date Rom: 08/28/07
Radio: 1.27.12.11
Protocol: 22.45.88.07W
so I say you canhelp me..you have my same rom..
Click to expand...
Click to collapse
Yes, i have the same ROM, but the ROM is on my device, i have't the RRU file to upgrade your device...
I extracted the ROM, but for now don't know how to reconstruct it.
So you must wait or send to repair...
problem solved
I resolve it!!
Share this solution please it can help someone!!!
I was blocked to boot menu (no system bootstrap..)..so i launch mtty program and digit:
boot nbh ... et voilà my kaiser restart!!!!!!!!
After I reflashed rom with hardspl in correct way...
Thank's for all!!!!
ciassi83 said:
I resolve it!!
Share this solution please it can help someone!!!
I was blocked to boot menu (no system bootstrap..)..so i launch mtty program and digit:
boot nbh ... et voilà my kaiser restart!!!!!!!!
After I reflashed rom with hardspl in correct way...
Thank's for all!!!!
Click to expand...
Click to collapse
Good news, mate.... congratulations....