Samsung Jack i637 & NRG Weather 3.x - Non-Touchscreen Windows Mobile Other

I've been reading the threads for all the NRG Weather versions trying to find some info on if this works properly on the Samsung Jack. Most posts are from long before the Jack was released.
I found the AppUnlock for the Jack and took the chance to load NRG Weather 3.1. One of the panels loads properly on the Jack, but the forecast does not. Has anyone else tried this app and resolved this?
NRG Weather 3.x thread:
http://forum.xda-developers.com/showthread.php?t=399758

the htc nrg works perfect on jack

jndrad said:
the htc nrg works perfect on jack
Click to expand...
Click to collapse
Did you do anything specific to get both panels working properly? Did your screen look like mine until you selected the HTC NRG profile from options?

It works perfectly on my Jack and I did not have to do anything special. Which version are you trying to load? I used the latest.

phoneoftheday said:
It works perfectly on my Jack and I did not have to do anything special. Which version are you trying to load? I used the latest.
Click to expand...
Click to collapse
Version 3.1 from the post linked above. I don't think I picked the HTC theme though, I believe I had selected NRG when I set it up. Does the theme make a difference depending on your device?

The theme should not make any difference. Wish I could be of more help. When I installed it to my phone it just worked.

I'm probably going to return this phone today anyway, the battery can't even last 8 hours.

Since you have already app unlocked the phone, uninstall the SOTI program. It drains batteries insanely fast. Once you uninstall that, you will get your battery life back.
Secondly, what I had to do for the weather program, was to use CHome Configurator and do two things.
#1) Hide the two non-working panels.
For some reason two panels in CHome Configurator were showing in red as non-working. I forget what they were called.
#2) Change the registry entry CPRFile found in "HKLM/Software/Microsoft/CHome" from SlidingPanel to CHome.
This is telling it which cpr file to use. It is looking for SlidingPanel_320x240.cpr but the weather program is saving all the changes into CHome_320x240.cpr. What I actually did is I made a new file called SlidingPanelWeather_320x240.cpr and copied CHome into it. Then I changed the registry entry of CPRFile to SlidingPanelWeather and it took care of the rest.

mellojoe said:
Since you have already app unlocked the phone, uninstall the SOTI program. It drains batteries insanely fast. Once you uninstall that, you will get your battery life back.
Click to expand...
Click to collapse
Thanks for the tips! I've removed SOTI and will keep an eye on the battery life now. I was shocked when I couldn't make it more than 7-8 hours without charging.
I kid you not, I am literally 15 minutes from walking out the door this morning and I was starting to get the chargers and the box together to return and get an iPhone. I've been setting my wifes up over the weekend and was impressed. But if I can get this working, I'll stick with it since the guy at the store hooked me up. Price matched Best Buy for $99 and then gave me the $100 mail in rebate for it.

zeke, post up if you get it working with the directions above. I will try it on my wife's Jack tonight as well.

peeps said:
zeke, post up if you get it working with the directions above. I will try it on my wife's Jack tonight as well.
Click to expand...
Click to collapse
I plan to give it another go this week.

zeke009 said:
I plan to give it another go this week.
Click to expand...
Click to collapse
I installed it, disabled the red panels in chome config, set up the options, rebooted and all works fine. good luck...

peeps said:
I installed it, disabled the red panels in chome config, set up the options, rebooted and all works fine. good luck...
Click to expand...
Click to collapse
Is Chome Config part of the NRG Weather install or another tool that has to be loaded? I can't remember.

jndrad said:
the htc nrg works perfect on jack
Click to expand...
Click to collapse
Which theme/option are you using?
phoneoftheday said:
It works perfectly on my Jack and I did not have to do anything special. Which version are you trying to load? I used the latest.
Click to expand...
Click to collapse
Which theme/option are you using?
mellojoe said:
Since you have already app unlocked the phone, uninstall the SOTI program. It drains batteries insanely fast. Once you uninstall that, you will get your battery life back.
Click to expand...
Click to collapse
Seriously, thanks again for pointing that out. I removed that app and disabled recieve incoming beams and my battery has been awesome since last night. Icon shows a full charge, detailed view shows 85% - 90% charge. You rule!!
mellojoe said:
Secondly, what I had to do for the weather program, was to use CHome Configurator and do two things.
#1) Hide the two non-working panels.
For some reason two panels in CHome Configurator were showing in red as non-working. I forget what they were called.
#2) Change the registry entry CPRFile found in "HKLM/Software/Microsoft/CHome" from SlidingPanel to CHome.
This is telling it which cpr file to use. It is looking for SlidingPanel_320x240.cpr but the weather program is saving all the changes into CHome_320x240.cpr. What I actually did is I made a new file called SlidingPanelWeather_320x240.cpr and copied CHome into it. Then I changed the registry entry of CPRFile to SlidingPanelWeather and it took care of the rest.
Click to expand...
Click to collapse
I forgot to load a registry editor when I was at home. I had the NRG installer on my memory card and reloaded it while listening to a boring conference call today.
Layouts used:
1) iPhone Normal Layout (default) - didn't work
2) iPhone Slim Layout
3) Slim Panels Layout
4) Standard Panel Layout
5) HTC Normal Layout
6) HTC Slim Layout
7) NRG Slim Layout - didn't work
8) 6 Day Slim Layout
9) 6 Day Normal Layout (p) - didn't work
Some have stated that the app is working fine without any crazy modifications, I'm wondering what settings they are using.
The Extended Forecast panel works perfectly fine, it's the current conditions (I think that's what it is) that is giving me the red x. How do I hide it via the NRG Options or is that a reg edit that has to be done? Also, does this app add "Settings" entry for the Battery? I never noticed it until now, while it works there is no icon for it. Could it be something so simple as downloading one of those image packs?

I realized - I am using NRG's MiniWeather 1.2. It is, I guess, the one designed specifically for non-touchscreen phones. Let me find the thread that I got it off of. I'll edit this post to add it in.
((edit))
Here:
http://forum.xda-developers.com/showthread.php?t=403343

mellojoe said:
I realized - I am using NRG's MiniWeather 1.2. It is, I guess, the one designed specifically for non-touchscreen phones. Let me find the thread that I got it off of. I'll edit this post to add it in.
((edit))
Here:
http://forum.xda-developers.com/showthread.php?t=403343
Click to expand...
Click to collapse
Which one of the 3 worked for you?
Edit #1: I'm trying the BlackJack version now. Same thing, 1st panel is a red x and battery shows a red x in the settings panel. 2nd panel works wonderfully though. I'll have to try the regular version for any device later, I thought the BlackJack would be a better starting since this was a Samsung Jack.
Edit #2: Downloaded PHM Registry editor and emailed it to myself. So I was able to change the registry entry from SlidingPanel to CHome and everything is showing up now. Text got mighty small, but the layout is very well done! Still get a red X for the battery icon, but that I can live with since the rest is working properly.

zeke009 said:
Which one of the 3 worked for you?
Edit #1: I'm trying the BlackJack version now. Same thing, 1st panel is a red x and battery shows a red x in the settings panel. 2nd panel works wonderfully though. I'll have to try the regular version for any device later, I thought the BlackJack would be a better starting since this was a Samsung Jack.
Edit #2: Downloaded PHM Registry editor and emailed it to myself. So I was able to change the registry entry from SlidingPanel to CHome and everything is showing up now. Text got mighty small, but the layout is very well done! Still get a red X for the battery icon, but that I can live with since the rest is working properly.
Click to expand...
Click to collapse
I don't use the battery feature on it. I have turned off the Settings panel, just cause I never use it, so I can't help you tweak that any better.
Glad its working for you. I love it. Even better than the weather app that I had originally paid for, and no longer use.

mellojoe said:
I don't use the battery feature on it. I have turned off the Settings panel, just cause I never use it, so I can't help you tweak that any better.
Glad its working for you. I love it. Even better than the weather app that I had originally paid for, and no longer use.
Click to expand...
Click to collapse
I had Fizz Traveller installed, but with no homescreen plugins for WM6.1 it was worthless to me. This little app is amazing.
If he could package it up so it works with retail devices or makes CHome reg change during install, this could be the most popular weather app in the new MS Application Store I think (when it's officially live).

Related

Chome Weather 2.0

FYI, CHome Weather 2.0 works on the VOX. Please follow the link to see the original thread in the Excalibur forum.
http://forum.xda-developers.com/showthread.php?t=396068
And click here to download the files needed for the Vox.
http://forum.xda-developers.com/showpost.php?p=2250095&postcount=43
Hello...just downloaded this version of CHome Weather and it looks amazing...great job. There's only one problem, probably related to the 240x320 cpr file because, like I already read in the excalibur forum, there's an issue in 240x320 where the background looks a little odd and doesn't fit the area like it supposed to. But again amazing job...keep it up
EDIT: I've just used a version of the 240 x 320 cpr file already used in another version of your plugin and it works great now
I was just now testing the other layouts and there are some issues:
- I realized that everytime i change the layout, it doesn't matter the cpr 240x320 file i did put there because when the layout is changed the cpr file is kind of replaced by the one corresponding to the sellected layout.
- In the HTC and Iphone layout, it shows always an icon with a cross below the icon of the current weather, instead of showing the icon corresponding to the weather.
- In regular layout, the gold and silver backgrounds don't work well in 320 x 240.
- In the regular layout, in the 1 and 3 layouts, I can't see the hi and low temperature.
Yeah, you'll have problems with the portrait layouts.
Is it possible to fix the problem with portrait?? That is the last thing, that keeps me from donating.
I am so happy with this program. I worked as Organic M's test subject to get this working. I can't say I notice the problem you guys are talking about in regards to portrait mode.
This is what I see:
have the author, removed the files from the location... I am unable to get those...
Can someone help plzzzzzzz!!!!!!!
Thanks
Loku
lokeshmudgal said:
have the author, removed the files from the location... I am unable to get those...
Can someone help plzzzzzzz!!!!!!!
Thanks
Loku
Click to expand...
Click to collapse
There are 2 links in the main post at the top of this thread.
The first one is the weather program
The second one is all the files that need to be installed to /windows on your device
Davis,
From your post, it looks like that screen is in ladscape mode. Portrait is taller than wider, yours looks wider than it is taller.
Thanks a lot.. I found the same at the post. I was just eager to get Weather update on my VOX...So got carried away...
Thanks
Loku
frauhottelmann said:
Is it possible to fix the problem with portrait?? That is the last thing, that keeps me from donating.
Click to expand...
Click to collapse
Well if you put it that way, you'll definitely NOT get me to fix the portrait layouts. How about.. "here's a small donation and small request... I would really appreciate it if you could work on the portrait layouts(which is a major PITA) so this works properly on my phone".
Well then I Only wanted to know if it is possible to do it. But I can live without it. I can look outside to see the weather. You know I made a lot of stuff for the Vox...but I never received ANY donation!!!
works beatifull. got no issues with any layout (i'm using plain black background). excellent job!
the only question i have is if it is possible to manually edit order of appearance on home screen somehow as i could do it in standard homescreens in _home.xml file?
frauhottelmann said:
Well then I Only wanted to know if it is possible to do it. But I can live without it. I can look outside to see the weather. You know I made a lot of stuff for the Vox...but I never received ANY donation!!!
Click to expand...
Click to collapse
This is definitely NOT what I wanted to happen here. I worked with Organic M to get this app to work with our phone models and he was nice enough to help us out.
This is far from the thanks that he deserves, since the app is designed for an entirely different model.
Why so serious? can't we all just... get along?
tepss said:
works beatifull. got no issues with any layout (i'm using plain black background). excellent job!
the only question i have is if it is possible to manually edit order of appearance on home screen somehow as i could do it in standard homescreens in _home.xml file?
Click to expand...
Click to collapse
I think the Chome Configurator will allow you to change the order of Slides on your Home Screen.
http://forum.xda-developers.com/showthread.php?t=393104
polarbair said:
Davis,
From your post, it looks like that screen is in ladscape mode. Portrait is taller than wider, yours looks wider than it is taller.
Click to expand...
Click to collapse
I have no idea what you are talking about....
???
As I said I only wanted to know if it is posible nothing more. And I just wanted to clarify that people here are not thankful! I really do apreciate his work. And the work of all the other coders and cookers! I hope you understand my point!
Does this plugin use necessarily the whole width of the screen, or is it possible to customize its size or layout (present conditions, 2-days forecasts, 5-days forecasts...)?
At present I'm using Fizz Weather with Orange plugin on my Wings, in order to show an analoug clock and weather forecasts next to it (see here: http://forum.xda-developers.com/attachment.php?attachmentid=89987&d=1212446950); will it be possible to make the same thing with Chome Weather?
So... is anyone still interested in making this work better with the Vox ? Maybe ask some of your ROM cookers to look at the policies in the registry and ask them remove the restricts that don't allow cab files to copy files to the \windows directory ? Then I wouldn't have to make two separate .cab files when I released a new version That, and if anybody wants to help test the portrait layouts, we can make this happen.
Yes it would be great to see the weather plugin fully working on the Vox...that thing about the restrictions I never understood that because after checking myself the registry many times, I saw that the restrictions were disabled and the thing about installing files in the windows folder still remains a problem...

Customizing X7510 "Big" HTC Home

I have been looking for some tools for customizing HTC Home, which comes from Athena X7510 official ROM. You can find it in some cooked roms for X7500/x7501 as well, but this "big" version of Home plugin was first introduced in X7510, I think.
Well known HHC could be used for this, but there is no proper grafic files for this version of Home plugin. The files should be of proper size, as we are talking about VGA and biger version then the one from other phones.
I have prepared one small set of files for myself and am posting them here, so others can use them. Maybe others could do the same so we could bulild a set of graffics to be able to change our HTC HP.
The background is based on Poorlyduck's Background (thanks to Poorlyduck) and the clock is made out of Segoa Bold Gray Shaded delivered with HHC (thanks to emunutz).
I have attached my screen and grafics which can be used in HHC or copied directly to the folder where your HTC Home is installed (by default in Windows folder).
Edit:
All of you who can contribute with their work, please feel free and join here.
Edit2:
Attached Files contain HTC Dimond clock described in my post #6.
Does this mean if I copy and paste the files you provided I could make it look exactly as the screen shot? To which folder exactly? Is it as easy as selecting it off the today screen settings?
How did you show the time and Main Memory at the top bar together?
What is HHC?
Is there a way to change the color to all black?
How come you also have TABS on the top part? Is that part of the files you provided? How can I have those TABS?
Are you using Real VGA? If YES, will your files work with Real VGA at 96 dpi or do we have to use it at 196 dpi?
Sorry for the numerous questions...
cktlcmd said:
Does this mean if I copy and paste the files you provided I could make it look exactly as the screen shot? To which folder exactly? Is it as easy as selecting it off the today screen settings?
How did you show the time and Main Memory at the top bar together?
What is HHC?
Is there a way to change the color to all black?
How come you also have TABS on the top part? Is that part of the files you provided? How can I have those TABS?
Are you using Real VGA? If YES, will your files work with Real VGA at 96 dpi or do we have to use it at 196 dpi?
Sorry for the numerous questions...
Click to expand...
Click to collapse
My screen is build with some special soft which I use in all my phones.
On top bar i use WKTask, gprs connection monitor and pBar.
The last one is showing time and memory in right top corner. It's main perpouse is more or les the same as WKTask but I like them both. WKTask is bestin closing apps but pBar gives you some other things like showing time and memory.
HTC Home is standard Today plugin. It does not give you those upper tabs. I use UltimateLounch (UL) for it. You can build tabs with normal icons/links to apps on your Athena, but also you can use Today plugins as tabs or combunation of Today plugins and sections with normal icons. The best is that you can use gestures to change from one tab to the other and it can show you a cube efect switching to the oter tab.
Hope this helps.
Edit:
All of this should work in realvga. I did not test it in this Athena, but the same config have used in my old x7500 with realvga 128dpi and it was fine. Now have decided that I prefer finger touch then density, so did not install realvga on my new x7510.
HHC is HTC Home Customizer by emunutz.
Thank you for clarifying everything. I'm going to check out Ultimate Launcher.
I also found pBar 1.5. Is this the version you are using?
cktlcmd said:
Thank you for clarifying everything. I'm going to check out Ultimate Launcher.
I also found pBar 1.5. Is this the version you are using?
Click to expand...
Click to collapse
That's it.
HTC Dimond style clock
I have resized HTC Dimond clock made originaly by Ipaso.
It looks nice on HTC (black) them and Poorlyduck's backround. HTC theme was moded a little. As always I use UL as main organizer of my screen.
All files are for portrait and landscape.
Edit:
I have updated my attached file in my post #1. HTC Dimond by Ipaso is now fixed to solve the problem of small "0" in landscape and 12 hours type clock. Bug found by robjhellis (thanks).
where can i get the new home screen? i dont want to flash to spl 3.5 im still on 1.2 can anyone post the cab of the new htc home screen?
cjmedina said:
where can i get the new home screen? i dont want to flash to spl 3.5 im still on 1.2 can anyone post the cab of the new htc home screen?
Click to expand...
Click to collapse
You can google for emunutz web page of his HTC Home Customizer. I think he provides installers of HTC Home plugin.
Color Icons for BIG HTC Home
I have been running AP4 since it was released and am very pleased with the great work done by the AP team. However, I was looking to add a bit of color to the HTC home and I have created a set of icons to do so.
If you like....please enjoy.
looks very good!
many compliments
and...thank you
Customizing "Big" HTC Home
Some time ago, I have opened a thread for customizing "Big" HTC Home plugin for Athena. The thread is here: http://forum.xda-developers.com/showpost.php?p=2506158&postcount=1.
It would be nice if people could have all efforts for this subject in one place.
BTW, nice done.
can you make the clock look like diamond's, thanks
Tadeusz said:
Some time ago, I have opened a thread for customizing "Big" HTC Home plugin for Athena. The thread is here: http://forum.xda-developers.com/showpost.php?p=2506158&postcount=1.
It would be nice if people could have all efforts for this subject in one place.
BTW, nice done.
Click to expand...
Click to collapse
Done Thanks for the suggestion
Tadeusz said:
I have resized HTC Dimond clock made originaly by Ipaso.
It looks nice on HTC (black) them and Poorlyduck's backround. HTC theme was moded a little. As always I use UL as main organizer of my screen.
All files are for portrait and landscape.
Click to expand...
Click to collapse
Tadeuz, I've copied your Diamond Diamond Clock on to my 7510 and in landscape the first digit is about half ther siz of the other three. In portrait they are all tye same size. Any thoughts on why this might have happened?
Also, any chance to give us a run down on the settings for Ultimate Launcher to get the top selection bar. Just cannot work it out.
Very many thanks.
robjhellis said:
Tadeuz, I've copied your Diamond Diamond Clock on to my 7510 and in landscape the first digit is about half ther siz of the other three. In portrait they are all tye same size. Any thoughts on why this might have happened?
Also, any chance to give us a run down on the settings for Ultimate Launcher to get the top selection bar. Just cannot work it out.
Very many thanks.
Click to expand...
Click to collapse
I have no idea, what happened. You mean all digits on first place are smaller then the other 3 places, no matter what the actuall digit is at the momment?
If so then it means there is some problem with HTC Home Plugin. Are you sure, you are using the same version of Home Plugin as mine. Are you on X7510 or the older Advantage? If so then you could have some older "small" version of Home plugin.
Try to compare your screen with mine. In landscape you should have the clock on left side and messages infro on right side, not under the clock, as it is in other versions of Home plugin.
Talking about UL, there is good source of info at this place: http://forum.xda-developers.com/showpost.php?p=2134341&postcount=1
I could give you mine setup file but I use a lot of specific icons and links, as well as some today plugins, which you could not have on your device. I have noticed that UL could hang up if you load a setup file with links to non-existing apps or today plugins. This would mean a hard reset if you do not have some special recovery software on your device and some additional knowledge, how to get out of such situation.
before you start to fiedle with UL config make a backup of working config (UltimateLounch.ini file). In case you get stucked, you can go into recovery state and return to this working config. Of cource backed-up file should by on your device, not on your PC.
Generaly, before you start to add a today plugin to UL config, you have to deactivate it in Today setup, so it is inactive. Then you can add it to some tab in UL setup.
In may case, my Today screen have only two active plugins, UL and callendar (as this is not working in UL). The rest plugins I have on particular tabs in UL. You also can set one tab as a default one, so it is always shown when the system starts.
You can use icons taken from the app, or you can prepare or use special icons for each app link (when preparing tab for app links).
Hope this helps.
Tadeusz you have given me a lot to digest. Much of it will need to wait until the weekend as the week is going to be busy at work. Thank you for your input.
Re the 1st digit. I can now report that it is only the zero that is the small size. When the 1st digit changes to a one then everything is of uniform size. I am running in 12 hour mode whereas I see your image is showing a 24 hour version. I'm, therefore, seeing the zero more often than you would see. Of course I never see a two in 1st place using the 12 hour clock. Other than that the clock and message set up is the same as yours. My device is the x7510 and I have applied auswims' color icons (post #9). Thanks for any further thoughts you may have.
I've attached a screenprint showing the small zero.
robjhellis said:
Tadeusz you have given me a lot to digest. Much of it will need to wait until the weekend as the week is going to be busy at work. Thank you for your input.
Re the 1st digit. I can now report that it is only the zero that is the small size. When the 1st digit changes to a one then everything is of uniform size. I am running in 12 hour mode whereas I see your image is showing a 24 hour version. I'm, therefore, seeing the zero more often than you would see. Of course I never see a two in 1st place using the 12 hour clock. Other than that the clock and message set up is the same as yours. My device is the x7510 and I have applied auswims' color icons (post #9). Thanks for any further thoughts you may have.
I've attached a screenprint showing the small zero.
Click to expand...
Click to collapse
So here we are. I've found it, thanks to your report. Tomorow evning I'll upload fixed package. My computer needs some work now, so can't do anything before I'll fix it.
Looking forward to that. Have a great day!
robjhellis said:
Looking forward to that. Have a great day!
Click to expand...
Click to collapse
It should be fixed now.
Applied the fix - now looking good. Thanks a bunch

Lets see some today screens

Heres mine after removing the horrid ATT one and browsing the Diamond forums for some options (theme, flipping clockclock, etc) Also added ariel battery in the upper corner to see battery percentage.
hspda
how did you get hsdpa on ur phone? I know this is totally off topic
yzf750 said:
Heres mine after removing the horrid ATT one and browsing the Diamond forums for some options (theme, flipping clockclock, etc) Also added ariel battery in the upper corner to see battery percentage.
Click to expand...
Click to collapse
another off topic question.... by installing Ariel Battery, does it just replace the current battery meter or did you have to switch off the origional batter meter (if so, how do u switch it off?).
thanks dude
sammypwns said:
how did you get hsdpa on ur phone? I know this is totally off topic
Click to expand...
Click to collapse
There is a registry setting you can use. I'm not sure of the exact details. Try searching around.
Or, you can flash romeos where it is already enabled.
yzf750 said:
Heres mine after removing the horrid ATT one and browsing the Diamond forums for some options (theme, flipping clockclock, etc) Also added ariel battery in the upper corner to see battery percentage.
Click to expand...
Click to collapse
Hi,
Could you be most specific on what you used? I like the tf3d buttons. Lots of stuff out there and I have yet to run into it.
Thanks
Edit: Simply Black!
venom037 said:
another off topic question.... by installing Ariel Battery, does it just replace the current battery meter or did you have to switch off the origional batter meter (if so, how do u switch it off?).
thanks dude
Click to expand...
Click to collapse
It will go over the original battery meter. Use the arrows in Ariels options to move it over there. Colors are also changable. Put the ariel battery exe in your /windows/startup on the fuze, This way it starts up automaticly each time.
Advanced config (sticky) found in the Diamond forum has the option to enable the H icon also.
yzf750 said:
It will go over the original battery meter. Use the arrows in Ariels options to move it over there. Colors are also changable. Put the ariel battery exe in your /windows/startup on the fuze, This way it starts up automaticly each time.
Advanced config (sticky) found in the Diamond forum has the option to enable the H icon also.
Click to expand...
Click to collapse
thanks dude, ur a star... back to ur origional post as it seems it totally went off topic... I use the stock ROM and don't use the TF3D as it drains battery. In theory its great but my peeve is that in the TF3D, I cannot see multiple calander entries. What I mean is I use SPB Diary and I can see my appointmets up to 31 days in advance and that is more useful to me... therefore I use the standard WM screen but installed SPB Time, Diary, and Phone Suite.
thanks
Today Screen Question
2 questions on the OP
1. are you getting major slow down on the black theme? I've put 2 diferent ones on my fuze and it takes 5 or 6 seconds for the people to come up on the tab, programs and others are almost as slow. Standard ATT grey is kind of ugly, but it's super fast, everything comes up immediately in tf3d
2. (probably make myself look dumb) what are you using to show your screen and get a picture? Are you literally taking a picture and cropping, or is there a tool of some sort to do this?
Thanks
cparkhorn said:
2 questions on the OP
1. are you getting major slow down on the black theme? I've put 2 diferent ones on my fuze and it takes 5 or 6 seconds for the people to come up on the tab, programs and others are almost as slow. Standard ATT grey is kind of ugly, but it's super fast, everything comes up immediately in tf3d
2. (probably make myself look dumb) what are you using to show your screen and get a picture? Are you literally taking a picture and cropping, or is there a tool of some sort to do this?
Thanks
Click to expand...
Click to collapse
After running all the well know perfomance tweaks off the forums here I really dont notice too much slowdown over the att theme. I notice maybe a 1 second delay on the touch flo screen from the time the tab is picked and let go until it loads the content of the screen. I can live with that.
Lots of freeware screen capture programs that do the basic job ok, I just stuck Screen Capture v1.1 off some ppc freeware site to snap it. I dont really need a fancy program for that It puts a bmp or jpg in your "documents" folder on the ppc then.

			
				
cparkhorn said:
2 questions on the OP
1. are you getting major slow down on the black theme? I've put 2 diferent ones on my fuze and it takes 5 or 6 seconds for the people to come up on the tab, programs and others are almost as slow. Standard ATT grey is kind of ugly, but it's super fast, everything comes up immediately in tf3d
2. (probably make myself look dumb) what are you using to show your screen and get a picture? Are you literally taking a picture and cropping, or is there a tool of some sort to do this?
Thanks
Click to expand...
Click to collapse
1. I'm using one of the black themes and it only takes about 2-3 seconds for the people to come up. (A second or two slower than AT&T but not too bad.)
2. Try My Mobiler at www.mymobiler.com
My Touch Pro HomeScreen Vista Mobile
Hope you Guys like it I Add to it Everyday I also have a mini Bluetooth Mouse To Control Everything....
wow...cool!
How did you get that Vista them like that, a particular program?
nucentury08 said:
Hope you Guys like it I Add to it Everyday I also have a mini Bluetooth Mouse To Control Everything....
Click to expand...
Click to collapse
i would really love for my screen to look like the blkue theme you have going. looks great! wold you share?
Still using ATT Theme, with tweaks
I tried using full theme from diamond threads, but they make my tf3d crawl, even with every tweak I've found. I found some threads that make it easy to change things, like add clock - icons - and then get rid of top and bottom curtains. Just used old fashioned today theme .tsk black to change top and bottom bar, and added wallpaper in tf3d settings, although right now that picture doesn't carry over to the other tabs, mun has a program to do that but it kills my clock to all zeros all the time.
http://forum.xda-developers.com/showthread.php?p=2877234#post2877234
chrome clock and icons
http://forum.xda-developers.com/showthread.php?t=436301
tools to alter screen without using full theme change (be careful on fuze background in every tab kills my clock)
Here is my current
Vista ui
Thresher said:
How did you get that Vista them like that, a particular program?
Click to expand...
Click to collapse
I just use The new Wisbar Dektop 2.2 And a Vga Wad pak And A Lot Of Time.lol
asadkhan1988 said:
i would really love for my screen to look like the blkue theme you have going. looks great! wold you share?
Click to expand...
Click to collapse
I just use The new Wisbar Dektop 2.2 And a Vga Wad pak And A Lot Of Time.lol

Pointui 2

pointui 2 free beta is released, i've tried it and its ok just ok (tested on touch cruise)
Code:
http://tinyurl.com/cebfez
Downloads
Code:
http://rapidshare.com/files/196857766/Pointui.Home2.VGA.WVGA.Free.Latest.cab
or for qvga
Code:
http://rapidshare.com/files/196857765/Pointui.Home2.QVGA.WQVGA.Free.Latest.cab
n1ck75 said:
pointui 2 free beta is released, i've tried it and its ok just ok
Code:
http://tinyurl.com/cebfez
Click to expand...
Click to collapse
thanks for the info i'm going to try it
finally...
I just tried it. It ran great on my XV6800. But yeah it was just ok and I don't see myself keeping it.
already taken it off. Maybe i was expecting too much
yea, their original Pointui was much better. This Pointui 2 was such a hassle to install that i could never imagine purchasing it. Also, it just doesn't look very nice.
For the long wait, and all of the "Viva la revolution" quotes on their homepage, it was really a let down. The scrolling does work well though.
That's my take.
The pointui tool to warn the users to the release was not working I did not receive no warn.
I'll try it now.
Well this is a beta (I have to remind myself), and I am going to use it exclusively all day. Maybe I might change my mind. But if not then back to good ole HTC Home.
edit: it just went blank so I had to reset it via the today screen. forget this i will go back to HTC home now.
segadc said:
Well this is a beta (I have to remind myself), and I am going to use it exclusively all day. Maybe I might change my mind. But if not then back to good ole HTC Home.
edit: it just went blank so I had to reset it via the today screen. forget this i will go back to HTC home now.
Click to expand...
Click to collapse
i second that!
I'm divided. There's not a whole lot to it, but it's "widget"-based and adding more widgets will certainly improve things. As it is, I like it okay. It's prettier than HTC Home and more functional and responsive than M2D, in my opinion.
I've yet to find a Homescreen replacement I really like. HTC's solutions are all weak in the functionality department, I think. SPB is pricey. Winterface is buggy and too minimal. Home 2 isn't perfect, but I think it's pretty close to what I'm looking for, so I'll keep it around for the moment.
I like that it plays nice with the existing Windows top bar instead of trying to replace it like some homescreen replacements. I'm not a big fan of the top bar, but replacing it is always flaky in my experience.
I'm surprised it doesn't include a dialer skin -- didn't Home 1 have a dialer?
I'll continue to look for the perfect UI too, so far my favs are winterface (buggy - not on my fone) and RLtoday. Hopefully, as said before, this being a beta it can only get better
(expect in the case of longhorn and vista lol)
Off topic but I have been using Home 1.5 forever since it is so stable for me. What are the benefits of 2.0 and is it worth it? I don't want to fix something that's not broken.
edit: Back on topic. Yeah it will be interesting to see some custom plugins and themes for Pointui 2.
I think they should have held off a bit longer until they replicated more of the functionality of older versions / BellUI. I hope there's more to come apart from applets because useful as they are they're not a full solution.
However as a basic framework it's cool, and with the addition of user made applets it's got a lot of potential. Will have to see how it goes.
Code:
http://rapidshare.com/files/198996426/16.02.2009.Pack.rar
theme and applet pack
I tried it and took it off in 5 minutes.
What I like - it offers me a completely different UI feel from what I use (WM 6.1)
What I don't like is the lack of plug in support.
1. Contacts - it doesn't recognize current contact programs (icontact burt edition); it's contacts program doesn't bring in photos (booo)
2. Weather - it didn't pick up my city so that is a complete waste of a tab.
3. Programs - why have a program tab/menu but not automatically pull up all the programs I have. I don't want to reinput that into the ui.
At that point I was fed up.
addicus said:
I tried it and took it off in 5 minutes.
What I like - it offers me a completely different UI feel from what I use (WM 6.1)
What I don't like is the lack of plug in support.
1. Contacts - it doesn't recognize current contact programs (icontact burt edition); it's contacts program doesn't bring in photos (booo)
2. Weather - it didn't pick up my city so that is a complete waste of a tab.
3. Programs - why have a program tab/menu but not automatically pull up all the programs I have. I don't want to reinput that into the ui.
At that point I was fed up.
Click to expand...
Click to collapse
I am glad some people take some more time to evaluate software. You do have a favorite contact tab with pictures. It is quite easy to add your own city for the weather tab. Alle your programs are available through the menu button. there is probably a lot more functionality you did not discover. Just try to look in the community site of pointui and you'll be surprised.
emay said:
I am glad some people take some more time to evaluate software. You do have a favorite contact tab with pictures. It is quite easy to add your own city for the weather tab. Alle your programs are available through the menu button. there is probably a lot more functionality you did not discover. Just try to look in the community site of pointui and you'll be surprised.
Click to expand...
Click to collapse
I looked but didn't want to have to do it AGAIN. I already have my contacts with pictures on my phone that is set (icontactbe6.4.5) and I like it better.
I looked to put my city on the weather and it didn't come up. Why waste my time at this point.
I am looking for improvement to how I use my phone and Point UI wasn't it. Plus I like using QuickMenu to get to my programs. If I didn't have soft-keys on my phone it may be a better option, but I do and it isn't.
addicus said:
I looked but didn't want to have to do it AGAIN. I already have my contacts with pictures on my phone that is set (icontactbe6.4.5) and I like it better.
I looked to put my city on the weather and it didn't come up. Why waste my time at this point.
I am looking for improvement to how I use my phone and Point UI wasn't it. Plus I like using QuickMenu to get to my programs. If I didn't have soft-keys on my phone it may be a better option, but I do and it isn't.
Click to expand...
Click to collapse
It's fine if you don't like Home, but emay was just pointing out that Home 2 DOES do the three things you're asking for.
The contacts manager absolutely does use contact photos.
Adding custom cities to the weather tab is definitely possible, it just requires a quick edit to the applet's XML, and there's a walkthrough on PointUI's site for doing so. They've stated that they'll make it more elegant in the future, but it IS possible now.
There's a full programs list accessed through the menu -- what you were looking at was the "quick list" where you add your favorites. There's a different spot for the full list.
Keep in mind that this is very much a "1.0" release right now. It's stable, fast, and functional, but lacks a lot of the polish and power that will be added as the community adds new applets and the official team adds the features that will make up the "Pro" version.
Personally, I'm REALLY liking Home 2 so far. It's just very solid.
I haven't tried every homescreen replacement out there -- just HTC Home, M2D, M3D, SBP MS 2.0, and ThrottleLauncher. And Home 1, as well.
Home 2 definitely has the best combination of functionality, speed, stability, and flash that I've seen.
I love POINTUI
I found the first version (HOME 1) a year or so ago to use on my PPC. This program proved to make my phone experience much more enjoyable. I have recently attempted to place Pointui 2 on my Tmobile Dash with no success. I know in time they will port ot all to this device, but first they must finish this PPC release. I can not waste until this is available to me.

Stock Verizon 6.5/Sense 2.1 ROM Problem with Today Screen Animated Wallpaper

I have updated my TP2 with the stock Verizon WM6.5/Sense 2.1 ROM upgrade. I have noticed that the weather animations on the Today screen wallpaper, which I think are great, will stop working if I go to beyond the Start screen and hit "All Applications", and it brings up the full apps list. Even without starting any of the apps there, going back to the Today screen, the animations on the wallpaper will not work with any method that I can find other than restarting Sense 2.1 with a soft reset or similar restart of manila.exe
I know most folks here are beyond the stock ROMs but wondering if anyone has seen this too and figured out how work around this problem that I assume is a bug and will not in all probability ever get fixed from HTC. Hopefully this is the worst probelm with the new ROM, whick I can live with but would like to correct if possible.
Thanks!
After a while it does stop the animation. One trick I found out (and it helps with the memory leak), is just move around the tabs just to initate the reloading of sense. Then it will do it again.
Hit the task manager at the top right of the screen (where you close running programs, etc) and then close it. The animation will restart.
I recognize the open and closing of Task Manager does restart it under normal situations, but it will not restart it if you go into the All Applications page. Thats what breaks it...keeps the aminations from running again until you restart Sense 2.1 through several methods, soft-reset, going through the motions of changing the Today screen icons (see above) or some app that resarts the manila.exe program like cleanRam.
Interesting I never noticed this before.
ohaness said:
I recognize the open and closing of Task Manager does restart it under normal situations, but it will not restart it if you go into the All Applications page.
Click to expand...
Click to collapse
Doesn't do it on mine. I've got the "All Applications" page in Sence 2.1. I've also installed 4 icons in the All Applications and All Programs pages, Awsome Start (single row WinMo start menu). Plus animated weather with any home screen wallpaper and a working BG4All.
Goin to My Application, or All Programs, then back to home and weather works fine. So either somthing in the .cabs & tweaks I've done has fixed it, or somthing in the .cabs & tweaks you've done broke it.
Yup it does it for me. Now I know what stops the weather.
msh441 said:
So either somthing in the .cabs & tweaks I've done has fixed it, or somthing in the .cabs & tweaks you've done broke it.
Click to expand...
Click to collapse
I have a pretty much stock phone with several tweeks/cabs (stop sent message balloon, restore message light flashing capabilities, and a couple of other minor ones) that I don't believe have anything to do with breaking it so I'm gussing that some of yours are "fixing it".
Hmm maybe its the weather for all backgrounds that is making the weather stay. I guess I will look for that cab and see if it fixes our problem.
Don't have the ability to hook up my phone and upload the .cab... but search for: "2.1apristel BG4ALL_W_Fullscreen_Animations.cab" and you should come up with it pretty quick.
That's the only one that worked for me with the CDMA Verizon 6.5/Sense 2.1 phone without breaking somthing else.
Good luck. Hope it works for you.
ohaness said:
I have updated my TP2 with the stock Verizon WM6.5/Sense 2.1 ROM upgrade. I have noticed that the weather animations on the Today screen wallpaper, which I think are great, will stop working if I go to beyond the Start screen and hit "All Applications", and it brings up the full apps list. Even without starting any of the apps there, going back to the Today screen, the animations on the wallpaper will not work with any method that I can find other than restarting Sense 2.1 with a soft reset or similar restart of manila.exe
I know most folks here are beyond the stock ROMs but wondering if anyone has seen this too and figured out how work around this problem that I assume is a bug and will not in all probability ever get fixed from HTC. Hopefully this is the worst probelm with the new ROM, whick I can live with but would like to correct if possible.
Thanks!
Click to expand...
Click to collapse
Myself personally, I do not like the Manila start menu, and have disabled it. I use the standard WM 6.5 honeycomb start menu. I have not experienced any problems with the animations since disabling the manila start menu.
How do you disable just the Manila (Sense 2.1) start menu and use the WM6.5 one?
ohaness said:
How do you disable just the Manila (Sense 2.1) start menu and use the WM6.5 one?
Click to expand...
Click to collapse
You can do it one of two ways.
I did it with a .cab that also added a "Programs" tab in the TouchFlo/Sense interface as well. But using the registry editor. HKLM\Software\HTC\Manila\Configuration. Open File 11 and under the D word value "Enable", change the value from 0 to 1.
There is another edit, though, where you can choose which start menu the device uses. I'm 99% sure it's HKLM\Software\HTC\Manila and under the D Word Value "IsWM6.5" and the default setting is no (which = 0). Change it to a "1" and I'm pretty sure you'll get what you're looking for.
msh441 said:
You can do it one of two ways.
Open File 11 and under the D word value "Enable", change the value from 0 to 1.
"IsWM6.5" and the default setting is no (which = 0). Change it to a "1"
Click to expand...
Click to collapse
In both cases, my settings are "1" and I have not changed these at all from the Stock VZW 6.5 upgrade. Am I misreading?
ohaness said:
I have updated my TP2 with the stock Verizon WM6.5/Sense 2.1 ROM upgrade. I have noticed that the weather animations on the Today screen wallpaper, which I think are great, will stop working if I go to beyond the Start screen and hit "All Applications", and it brings up the full apps list. Even without starting any of the apps there, going back to the Today screen, the animations on the wallpaper will not work with any method that I can find other than restarting Sense 2.1 with a soft reset or similar restart of manila.exe
I know most folks here are beyond the stock ROMs but wondering if anyone has seen this too and figured out how work around this problem that I assume is a bug and will not in all probability ever get fixed from HTC. Hopefully this is the worst probelm with the new ROM, whick I can live with but would like to correct if possible.
Thanks!
Click to expand...
Click to collapse
Hmmm, I Downloaded My ROM from PCD & I Don't Have Animated Weather for My Today Screen, Only In My Weather Tab. Where Did You Download Your ROM From?
Downloaded from the same place as you...PCD.
Hmmm, By Any Chance Do You Still Have The Original ROM You Updated Your TP2 With? Can You Send It My Way? I'd Really Appreciate It
Actually I deleted it. The phone was updated and working properly so I saw no reason to keep it as I could always download from the PCD website again.
Did you load other tweak cabs to your new 6.5 ROM that you had in 6.1. Maybe you did someting. Try a hard reset?
Sorry thats all I have for suggestions.
ohaness said:
How do you disable just the Manila (Sense 2.1) start menu and use the WM6.5 one?
Click to expand...
Click to collapse
Change registry setting below:
HKLM\Software\HTC\EnlargeMenu\EnableManilaStartMenu
Set DWORD to 1 (use TF3D)
HKLM\Software\HTC\EnlargeMenu\EnableManilaStartMenu
Set DWORD to 0 (Use WM Menu)
ohaness said:
Actually I deleted it. The phone was updated and working properly so I saw no reason to keep it as I could always download from the PCD website again.
Did you load other tweak cabs to your new 6.5 ROM that you had in 6.1. Maybe you did someting. Try a hard reset?
Sorry thats all I have for suggestions.
Click to expand...
Click to collapse
I'll Give It a Shot Doing a Hard Reset, Thanks for The Help Though

Categories

Resources