Hi to all!
I was flashing CR86 2.5 on my Wizard when my pc reset by himself.
Now my Phone freeze on Spash Screen (where there are the IPL SPL Rom Radio Version).
Activesync doesn't see the phone, but Mtty do.
I'm able to get the phone in bootloader mode, there is a way to reflash the rom from SD with MTTY_updateROM.exe ??
I've already tried this Method but the rom in my wizard i think is corrupted
Hello... Hope it work`s for you too...
fantuz83 said:
Hi to all!
I was flashing CR86 2.5 on my Wizard when my pc reset by himself.
Now my Phone freeze on Spash Screen (where there are the IPL SPL Rom Radio Version).
Activesync doesn't see the phone, but Mtty do.
I'm able to get the phone in bootloader mode, there is a way to reflash the rom from SD with MTTY_updateROM.exe ??
I've already tried this Method but the rom in my wizard i think is corrupted
Click to expand...
Click to collapse
Do This: http://forum.xda-developers.com/showpost.php?p=4104858&postcount=3
It Works!!!
Thank You Man Now My Wizard si full Working
Related
hi can you please help i flashed my M600 with jester 2.20 G4 now my phone is stuck in bootloader.
if i hard reset then press send if comes up format failed
i have reloaded rom 2-3 times but still same fault
bootloader screen shows
IPL 2.09
SPL 2.20.0001
have i flashed my phone with the wrong rom ?
can my M600 be saved
thanks for any help
jasonrabbit said:
hi can you please help i flashed my M600 with jester 2.20 G4 now my phone is stuck in bootloader.
if i hard reset then press send if comes up format failed
i have reloaded rom 2-3 times but still same fault
bootloader screen shows
IPL 2.09
SPL 2.20.0001
have i flashed my phone with the wrong rom ?
can my M600 be saved
thanks for any help
Click to expand...
Click to collapse
i have the same problem too, i used g4 rom and now its stuck at bootloader rainbow screen.
my IPL is 1.00
SPL is 2.20.0001
jester gold card
after lots of looking and reading of threads i need to wait for Jester Gold Card
come on jester work your magic my M600 is now a paper weight.
jasonrabbit said:
hi can you please help i flashed my M600 with jester 2.20 G4 now my phone is stuck in bootloader.
if i hard reset then press send if comes up format failed
i have reloaded rom 2-3 times but still same fault
bootloader screen shows
IPL 2.09
SPL 2.20.0001
have i flashed my phone with the wrong rom ?
can my M600 be saved
thanks for any help
Click to expand...
Click to collapse
Hi,
Its very common to do mistake of flashing G3 device with G4 rom, and
no of people doing this mistake increasing every day.
Its very sad to have a bricked device, rather it wud hav been better
to search the forum thourouly before making attempt to flash.
Yes the only hope is Gold Card Project success,
We all r waiting for that day!
ic. Gold Card Project
anyway i did a stupid mistake that lead my prophet into a paper weight.
i click on the G4 rom thinking thats step 2...
now i cant down grade back to old wm5
If You & press camera button + reset
You'll get in the bootloader screen
after that try a ROM wich is your phone's
( I disconnected while updateing tot jesters AKU 3.3 )
Have a functional phone now
CooT said:
If You & press camera button + reset
You'll get in the bootloader screen
after that try a ROM wich is your phone's
( I disconnected while updateing tot jesters AKU 3.3 )
Have a functional phone now
Click to expand...
Click to collapse
no, u cant flash anything now as g4 rom is inside a g3 device
and the moment u try to "downgrade" it will prompt for a NEWER FILE to be used
my m600 stucked at very starting screen help me plz
hi guys
i got a orange spv m600 i tried to unlock it from the stuff which i got online but instead i messed up the phone
its stucked at the vry first screen showing a orang logo
and
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20
OS 1.0.13.21
could any one help me out plz plz plz i am a new person and i dont know any thinig about this roms or any software u can email me my emial id is
[email protected]
subject m600(plz dont forget to mentioned in the subject field) bcoz i get loads of junk mail that y i delete them
thanks
Same Problem
I have a fried M600 that is also stuck in the "Orange" Screen when turned on...
How can I get past this?
I have tried re-installing the original ROM but it still refuses to boot.
What Installer do I need to download?
Which ROM would do the trick?
How do you install CAB files without Activesync?
Can anyone help me on this as I'm lost without my M600.....
Hi,
I have XDA Neo and last night, I upgraded my Neo (G4) to jesterz AKU 2.3 ROM with 8MB poolsize and after successful upgrade, I get first bootscreen with IPL, SQL and GSM but nothing happens after that as it just get stuck at this screen. Then I am resetting this device and then it gets into bootloader screen. I have tried doing hard reset using Comm+Camera+Reset Button but it doesn't halp as well...as it gets into bootloader again.
Could you guys help me to get my device working again?
Thanks.
downgrade to an original rom
I'm stuck in the same problem.. My XDA stops at the O2 Boot screen, showing the IPL (2.15.0001), SPL, GSM and OS.. and nothing happens..
And I can't downgrade or even upgrade to another OS version, 'cause any I ran RomUpgradeUtility says that the pda isn't connected to the PC..
Remembering: I am not stuck at the 3 colors bootloader screen. I'm stuck at the O2 IPLs BootScreen, where I am not able to communicate with the computer by USB..
What should I do now?
Thnx
Abib said:
I'm stuck in the same problem.. My XDA stops at the O2 Boot screen, showing the IPL (2.15.0001), SPL, GSM and OS.. and nothing happens..
And I can't downgrade or even upgrade to another OS version, 'cause any I ran RomUpgradeUtility says that the pda isn't connected to the PC..
Remembering: I am not stuck at the 3 colors bootloader screen. I'm stuck at the O2 IPLs BootScreen, where I am not able to communicate with the computer by USB..
What should I do now?
Thnx
Click to expand...
Click to collapse
You people should read before touching custom ROM's!
Hold both the camera and comm button to get in the 3 color screen. Then flash with an original ROM.
Wilson77 since you have a G4 device you can't just flash it with any ROM. Check the forum on flashing your G4 device.
Mccune, you're right.. curiosity suX!
I did the Bootloader Procedures (Camera + Reset) and now I'll try to downgrade to the shipped german rom, and then to the English Crossbow that ran nice since January..
But Thanx for the help!
Abib said:
Mccune, you're right.. curiosity suX!
I did the Bootloader Procedures (Camera + Reset) and now I'll try to downgrade to the shipped german rom, and then to the English Crossbow that ran nice since January..
But Thanx for the help!
Click to expand...
Click to collapse
LOL Noting wrong with cuiosity, on the contrary. But flashing the wrong way (specially the G4) may brick your device. Were just tryin' to prevent that by providing you with a lot of information
Hi every one, i've tried to install the last PDVIET rom, but upgrade was interrupted.
Now, my prophet not start, i've made a hard reset, but it stands on first stage when shows pda information.
My computer don't recognize it now, so i can't reinstall the rom!!!!!
Please help!!! what can i do !!!????
force it into bootloader mode
Thank you very much, It works!!
Madcap180 said:
force it into bootloader mode
Click to expand...
Click to collapse
hello i have the same problem
iwas on pda mobiz 1.0 wm6 and i want to change for the new pdaviet 4.0.0.0
the updates was successful with the Upgrade_ROM bat ...
but after hard reset my pdaphone blocks on orange screen , i can see the OS 4.0.0.0 but stays blocked on this screen ...
You mean force into bootloader , can you help me and just says how to cause im newbie
Thanks for your advices
lookum said:
hello i have the same problem
iwas on pda mobiz 1.0 wm6 and i want to change for the new pdaviet 4.0.0.0
the updates was successful with the Upgrade_ROM bat ...
but after hard reset my pdaphone blocks on orange screen , i can see the OS 4.0.0.0 but stays blocked on this screen ...
You mean force into bootloader , can you help me and just says how to cause im newbie
Thanks for your advices
Click to expand...
Click to collapse
While pressing the camera button,softreset your device and it will go into the bootloader..
i think i hv bricked my prophet after upgrading of pdaviet rom.
the phone stalled after upgrading of rom and went reset struck on os 4.0.0.0 screen.
kindly help.
the bootloader mode as described.. is it in red/green/blue screen with word usb on the bottom left?
nothing happens when connected to pc...
activesync still cannot identify the device....
pls help...i am a noob on this....
did you downgrade to WM5 before upgrade?
zeroed said:
did you downgrade to WM5 before upgrade?
Click to expand...
Click to collapse
??? downgrade then upgrade ext rom?
if tats the case, no i did not do tat.
did i brick my phone???
what can i do now?
try to enter bootloader mode,downgrade to wm5 and then flash to wm6.good luck
zeroed said:
try to enter bootloader mode,downgrade to wm5 and then flash to wm6.good luck
Click to expand...
Click to collapse
got it back.
thanks for the response.
i also read wiki, now on pdaviet .3
seem like .4 having batt drain issue....
In Trouble
hi...
i installed ROM v4.0.0.0
since it had a lot of problem i went to ROM v4.0.0.0.3a
but my cell still hanged a couple of times so i had another installation of ROM v4.0.0.0.3
during the installation it hanged and i got a msg on my screen that itwrite cannot finish
i reset my cell and now it does not start. only thing i get is my start up screen that is HTC and
IPL 2.15.0001
SPL 2.15.0001
GSM 02.19.21
OS 4.0.0.0
Dopod Enjoy mobility.
Can someone help me.....
i am stuck badly.
HI....
for a while I had flashed the German Rom WM 6 to my wizard.
It works and Im happy with it .
But now after a complete power up it starts after a short loading (windows) directly with the password inquiry on the screen. That normaly is displayed after the screen callibration.
And I can´t type in the password and when the wizard says it is wrong.
So I tryed to flash a new image, no chance !!!
The ruu says That is not the right version or error 300 no conection when I start with the boot screen after power up and camera button.
The IPL is 2.21.0001 and
the SPL is 2.G4.4PDA
Maybe there is some help outside here
Thank you
First you identify your wizard
you have a G4 wizard and I believe that u r trying to flash with a G3 rom thats one error i can see.
second most important thing is try to hard reset your device first to come back on the normal situation and then again go through with step by step for CID unlock. which you need to flash your rom then go through with this link which you can find on Wiki also.
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
then try once again
hope this solve your wizard probem
I tried to flash the old g4 rom that i have since 5 month
hello guys! i have a WIZA200. i'm was flashing it to wizflo2d ROm. at 99% my PC suddenly rebooted. my MDA is stucked with the red,green,blue screen. with IPL 2.26 SPL 2.26. activesync cannot detect it. how can i revive my MDA? please help...
BTW, i'm using TNT's new released ROM when i was flashing it to WizFlo2D.
thanks in advance
OmenCheppy said:
hello guys! i have a WIZA200. i'm was flashing it to wizflo2d ROm. at 99% my PC suddenly rebooted. my MDA is stucked with the red,green,blue screen. with IPL 2.26 SPL 2.26. activesync cannot detect it. how can i revive my MDA? please help...
BTW, i'm using TNT's new released ROM when i was flashing it to WizFlo2D.
thanks in advance
Click to expand...
Click to collapse
Hi,
No problem, be cool. Few months ago I had this problem and was solved.
Just connect the device with bootloader onscreen (RGB). You will see USB on bottom. Flash the official ROM.
After your device is stable, you can flash to any custom ROM.
Thanking You
I've just posted this in another thread but I'll give you the same reply..
---
Try starting in bootloader mode then flashing the Wizard Love rom using the included RUU, or failing that Mun's RUU (included with WizFlo).
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
You need to start the phone in bootloader mode without the usb cable plugged in, give it a few seconds, then plug the cable in.. wait for the USB icon to appear in the bottom left corner, then start your RUU. I've found that the order is very important when dealing with unflashable wizards.
I've unbricked my phone twice with this method.. You could flash Wizard Love to a loaf of bread if you could get the cable to stick in it.
---
I used this to recover a flash that died at 10%, when I couldnt even get the official rom to work, so hopefully it should help you.