Database Info

99% Freeze?

My ROM upgrade freezes at 99%. Please tell me what im doing wrong.

mr.allawi said:
My ROM upgrade freezes at 99%. Please tell me what im doing wrong.
Click to expand...
Click to collapse
If it's a ROM you cooked yourself then it's too large to fit. Otherwise, not sure.

What ROM are you trying to flash?

update it with the wizard love ROM and then use shell tool to get the OS u want from any ROM.

I'm gonna say this just to cover all the bases..I'm not sure how long you are waiting but a standard flash can stay at 99% for a LONG time before finally finishing the flash...when they say the flash should take around 10 minutes they are not kidding so I hope you are not just getting impatient.

Merlin_reloaded said:
What ROM are you trying to flash?
Click to expand...
Click to collapse
I have tried all roms, they all have the same problem!

Just wait for it, it stays at 99% for 5 mins sometimes.

it says failed to complete then it shows some recovery.

raj_luvs_frnds said:
update it with the wizard love ROM and then use shell tool to get the OS u want from any ROM.
Click to expand...
Click to collapse
I have just done this now and after I finished the shelltool, I did a hard reset and it stayed on the flash screen of Wizard Love..
I am unsure on how to do a hard reset for the HTC Wizard. Anybody help me?

mr.allawi said:
I have just done this now and after I finished the shelltool, I did a hard reset and it stayed on the flash screen of Wizard Love..
I am unsure on how to do a hard reset for the HTC Wizard. Anybody help me?
Click to expand...
Click to collapse
hold down the record button and comand button at the same time then reset using the stylus (while holding the buttons) then a black screen will appear asking you to press call button to hard reset
for more details you have to visit wiki

It sounds to me like you didnt do much reading before diving into this whole process. If you have a CID locked g4, you will never be able to flash a custom rom with ruu method untill unlocking it.
Should you use shelltool then you will need to wait untill it says it is finished(read all instructions before attempting. They will tell you everything you need to know) If shell tool never gives you the complete message then just let it sit for about half an hour to be safe and then just HARD RESET, NOT SOFT RESET by holding comm manager, voice button and using stylus to reset with the little pin hole.
If you read everythign there is to know about the process and all possibilities, then you will have no problem.
Just read read read... This website is like the rom flashers bible. Everything you need to know is all here. You just have to find it and read it.

HELP! unable to update rom 302 errors

*** i got my phone up and running. i am using a very old firmware from at and t from 12/07. however, fromt this point on, any other rom that i try to use is giving me a 302 error, both official and cooked roms except for the old one. can anyone shine some insight on this? thanks.
UPDATE on current problem:
1) i tried to update to a custom rom for the first time. it had worked. i used hard spl 3.29, then installed the natf v4 rom. the rom worked fine and everything. however, it was not to my liking.
2) maybe this was my stupidest mistake because i am a newbie. i tried to install an official rom right after. when i did this, the phone was stuck on 89%, and just freezes. and now i am stuck at the tri color screen (boot screen).
3) nothing i load is working. can someone please point me in the right direction in what im suppoose to do from here. i tried the sticky thread, but i am not having any luck. i need this to work asap. please help. thanks all is aprpeciated.
when i try to install the same natf rom, i get the error 262. it doesnt even go past 0%.
when i try to install the original oem rom, it goes to 89%, and stops and gives me a 309 error.

there's plenty of stickies and other topics around that have potential solutions, try those first, post back if nothing's working.

Travito said:
there's plenty of stickies and other topics around that have potential solutions, try those first, post back if nothing's working.
Click to expand...
Click to collapse
yes ih ave tried. the phone is not workign whatsoever. it wont pass the at and t screen that show the R, G, and D numbers. i can do hard reset, that doesnt work. it just stops. im still searching all over the forum right now. but i need the right solution because i need to get this phone to work ughh im sorry if i seem like im asking to much. please any help is appreciated thanks.

i also cant plug it in through usb. after it freezes that stops too so i cant load anything to update the phone.

What version of hardspl are you flashing? Maybe your rom do not support that. try to manually go to tri color screen and see if it connect to USB or not.

cham1980 said:
What version of hardspl are you flashing? Maybe your rom do not support that. try to manually go to tri color screen and see if it connect to USB or not.
Click to expand...
Click to collapse
i beleive it was 3.29. how do i manually go into tri color screen? note i cant go pass the first screen

i am currently trying the sd card method to boot up with the kaidiag.nbh file. its not working. nothing boots up. its still freezing at the first screen.

bknewtype said:
i am currently trying the sd card method to boot up with the kaidiag.nbh file. its not working. nothing boots up. its still freezing at the first screen.
Click to expand...
Click to collapse
is there anythign specific i have to do to boot up from the sd card? sorry for so many responses i am panicing and ihave to ge tthis phone to work before i go to work in the morning..

hold down the camera button (FULL press) and soft reset, try flashing again

Travito said:
hold down the camera button (FULL press) and soft reset, try flashing again
Click to expand...
Click to collapse
thanks. i jsut tried that. it booted up and isntalled update. it went to the tri color screen, then to the white loading screen, and now im stuck again...

ok it got pass the white loading screen. now im stuck at the good ol tri color screen. anything i was trying to load fromthis point foward is not working. evrtygyhing either is stuck on 0% or it jsut gives me an error to go to recovery mode. please help. i jsut want to revert bck to the oem rom if possible. i just need my phone up and running.

i am getting the error RUU 302. where would i go about this to do it from scratch? as i mentioned i so far have 3.29 hardspl installed

updated and explained problems in detail on first post.

have a look at this thread http://forum.xda-developers.com/showthread.php?t=423486 , it explains how to get out of the bootloader mode...hope it helps...

The Reaper said:
have a look at this thread http://forum.xda-developers.com/showthread.php?t=423486 , it explains how to get out of the bootloader mode...hope it helps...
Click to expand...
Click to collapse
thanks for the response. i have been on that thread for about 2 hours now, but i still cant get it to work. if you can read my first post, i have updated to see my current situation. thanks.

OK which official ROM are you trying to install?

btstarcher said:
OK which official ROM are you trying to install?
Click to expand...
Click to collapse
the latest from the site. 3.57 i believe

I'm sorry, from which site? Is the filename RUU_Kaiser_CINGULAR_WWE_3.57.502.2_radio_sign_25.88.40.05_1.65.21.18_Ship.exe?

btstarcher said:
I'm sorry, from which site? Is the filename RUU_Kaiser_CINGULAR_WWE_3.57.502.2_radio_sign_25.88.40.05_1.65.21.18_Ship.exe?
Click to expand...
Click to collapse
yup thats the one. it stops at 89% and gives me the 302 error

Dang dude I don't know.

Issues after flashing to new rom.

Recently I got my Fuze in the mail and I wanted to try out some of the roms here at xda devs.
I played around with NATF winmo 6.1 rom and it was nice but soon after I wanted to try RRE's version of 6.5 I followed all the directions for flashing the rom to sd card. but after the flashing I noticed that the old boot splash screen from NATF's win mo 6.1 was still there and I wanted to know how do i fix that.
I was not too sure how to word this or search for it in that matter but any help would be greatly appreciated

Might try reflashing, then, when you see the screen "tap to set up your screen" (where you press the + on the screen in the middle & corners), do a HARD RESET. hold down volume down, press the center "ok" key, the one inside the ring of light, press the reset button on the bottom of the phone, release the reset button BUT CONTINUE to hold the volume down, ok button til the screen comes up, follow the directions (tells you to press the volume UP key). Let it load, and see if that fixes it.

Tried that no luck
It's kinda weird you would think that after flashing a rom everything would be gone but thanks for your help

go to natf's 4.7 thread and read the first couple posts... your answer is there. the reason it wasnt removed because RRE's rom doesnt have a splash screen.

you could always add your own splash screen...

Thanks to all for the info I will look at that.
I still find it weird that that would happen but you guys on more on the level than I am with all of this.
Oh yea and is there a way to install a flash screen on a working device or do i have to cook it into the rom and re-flash it.

OvermindX said:
Thanks to all for the info I will look at that.
I still find it weird that that would happen but you guys on more on the level than I am with all of this.
Oh yea and is there a way to install a flash screen on a working device or do i have to cook it into the rom and re-flash it.
Click to expand...
Click to collapse
I think this is the link on installing a splash screen..... if I'm not mistaken, you don't have to reflash or cook it into a ROM but I could be mistaken.... i think you just format your picture then place it into your windows folder somewhere.... read on.
http://forum.xda-developers.com/showthread.php?t=474070

Phone loops start-up logo after hard reset

Hi, I got a HTC Magic and have the Fatal1ty ROM installed, today I performed a hard reset on it (home + return + power -> clear storage). Everything seemed to go fine, but now when I start the phone it first shows the HTC Magic screen, then goes to Hero screen as always, but here comes the problem, it will just loop the screen with Hero logo over and over again, I thought this was part of the hard reset at first, but after 10 minutes it was still doing this. I can still enter fastboot /Hboot so I guess it isn't bricked.
Anyone got an idea what I can do to fix this?

Do a logcat, or run ddms and check what goes wrong at boot...
Babality said:
Hi, I got a HTC Magic and have the Fatal1ty ROM installed, today I performed a hard reset on it (home + return + power -> clear storage). Everything seemed to go fine, but now when I start the phone it first shows the HTC Magic screen, then goes to Hero screen as always, but here comes the problem, it will just loop the screen with Hero logo over and over again, I thought this was part of the hard reset at first, but after 10 minutes it was still doing this. I can still enter fastboot /Hboot so I guess it isn't bricked.
Anyone got an idea what I can do to fix this?
Click to expand...
Click to collapse

Babality said:
Hi, I got a HTC Magic and have the Fatal1ty ROM installed, today I performed a hard reset on it (home + return + power -> clear storage). Everything seemed to go fine, but now when I start the phone it first shows the HTC Magic screen, then goes to Hero screen as always, but here comes the problem, it will just loop the screen with Hero logo over and over again, I thought this was part of the hard reset at first, but after 10 minutes it was still doing this. I can still enter fastboot /Hboot so I guess it isn't bricked.
Anyone got an idea what I can do to fix this?
Click to expand...
Click to collapse
Do a nandroid backup and try reflashing the hero ROM. While you are at it you may want to try Jacheroski...I found it much faster on my 32A magic.

How can I flash a new ROM now? Let's say the Jacheroski ROM.
Would downloading it, changing it's name to Update.zip and then following this guide http://forum.xda-developers.com/showthread.php?t=537365 from step 7 work?
Appriciate the help guys

Babality said:
How can I flash a new ROM now? Let's say the Jacheroski ROM.
Would downloading it, changing it's name to Update.zip and then following this guide http://forum.xda-developers.com/showthread.php?t=537365 from step 7 work?
Appriciate the help guys
Click to expand...
Click to collapse
That did it

[Q] AT&T bootloop or suddent reboot

Hi, i have been looking for answers on the forum, and i learn new things but not how to fix this or what is causing it.
I have buyed i997 from a reseller. He sayd it doesnt work because it have bootloop, but i thinks that is not too much problem getting it working again, so i started searching for the pc drivers n software, then i find here in the forum the stock rom with and without root, i tested them both with odin and the bootloop stills present. I wipe cache and do a factory reset but it keep bootlooping, then think maybe if i update to latest AT&T rom, but no luck.Sometimes the phone just start and theres no bootloop but its very rare and most of the time when i get to the lock screen or setup manager suddently a gapps or something crash and my phome freezes and reboot. I flashed the carbon-jb-v1.6 and suddently it worked fine, no more bootloop and everything smooth,no crashes etc.. then i installed Facebook app and when i was ttyping a message the phone froze up and then restarts, and the bootloop came again, and im stuck on it, and when i pass it, which is very rare, i start typing info in the startup manager and the phone freezes and reboot.. I wipe/format cache, dalvik, factory reset, formated system and data before and after flashing the carbon rom again and it keeps bootlooping. Somebody have similar problems or know how to fix it?
Thanks
P.d. sorry for my bad english.

jakov.90 said:
Hi, i have been looking for answers on the forum, and i learn new things but not how to fix this or what is causing it.
I have buyed i997 from a reseller. He sayd it doesnt work because it have bootloop, but i thinks that is not too much problem getting it working again, so i started searching for the pc drivers n software, then i find here in the forum the stock rom with and without root, i tested them both with odin and the bootloop stills present. I wipe cache and do a factory reset but it keep bootlooping, then think maybe if i update to latest AT&T rom, but no luck.Sometimes the phone just start and theres no bootloop but its very rare and most of the time when i get to the lock screen or setup manager suddently a gapps or something crash and my phome freezes and reboot. I flashed the carbon-jb-v1.6 and suddently it worked fine, no more bootloop and everything smooth,no crashes etc.. then i installed Facebook app and when i was ttyping a message the phone froze up and then restarts, and the bootloop came again, and im stuck on it, and when i pass it, which is very rare, i start typing info in the startup manager and the phone freezes and reboot.. I wipe/format cache, dalvik, factory reset, formated system and data before and after flashing the carbon rom again and it keeps bootlooping. Somebody have similar problems or know how to fix it?
Thanks
P.d. sorry for my bad english.
Click to expand...
Click to collapse
the most inexpensive solution:
http://forum.xda-developers.com/showthread.php?t=1912599

qkster said:
the most inexpensive solution:
http://forum.xda-developers.com/showthread.php?t=1912599
Click to expand...
Click to collapse
Thanks man, but you think it can be the power button? When i unplug the battery and put it again the phone doesnt turn on or something, and when it boot up when i lock the screen with the power button it works fine. I set the cpu governor to conservative and since yesterday i didnt have any problem, but sometimes the phone reboots when typing, i think its someting with the processor or when the phone have little ram or something.
Thanks.

jakov.90 said:
Thanks man, but you think it can be the power button? When i unplug the battery and put it again the phone doesnt turn on or something, and when it boot up when i lock the screen with the power button it works fine. I set the cpu governor to conservative and since yesterday i didnt have any problem, but sometimes the phone reboots when typing, i think its someting with the processor or when the phone have little ram or something.
Thanks.
Click to expand...
Click to collapse
If you ran the phone on complete stock GB or FROYO and you are getting boot loops, it may be a hardware issue.
One of the few things that will give you boot loop with the samsung logo while using the phone is the power button.
Either way, it's no big deal to open it and clean it up to see if the problem goes away.

qkster said:
If you ran the phone on complete stock GB or FROYO and you are getting boot loops, it may be a hardware issue.
One of the few things that will give you boot loop with the samsung logo while using the phone is the power button.
Either way, it's no big deal to open it and clean it up to see if the problem goes away.
Click to expand...
Click to collapse
Thanks bud, I will try cleaning the button. Also I want to ask, is there something to log everything when the phone start? Or something to test the hardware functionality?
Thank you for your time

post number #112
http://forum.xda-developers.com/showthread.php?t=1437548&page=13

qkster said:
post number #112
http://forum.xda-developers.com/showthread.php?t=1437548&page=13
Click to expand...
Click to collapse
Thank you, the post its the number #122

jakov.90 said:
Thanks bud, I will try cleaning the button. Also I want to ask, is there something to log everything when the phone start? Or something to test the hardware functionality?
Thank you for your time
Click to expand...
Click to collapse
Bootlog Uptime will keep a record of all boots from an Android OS perspective ... It will also track crashes... It won't track events outside of a complete restart (i.e. power button bootloops.. But those are pretty obvious when they occur)
For hardware testing, try Z Device Test... That won't tell you about the buttons though... If your screen turns on without pressing power button or from any other standard event (like receiving a text or a phone call), or the phone restarts by itself, time to get cleaning..
Sent from my SAMSUNG-SGH-I997 using xda premium

Zen Arcade said:
Bootlog Uptime will keep a record of all boots from an Android OS perspective ... It will also track crashes... It won't track events outside of a complete restart (i.e. power button bootloops.. But those are pretty obvious when they occur)
For hardware testing, try Z Device Test... That won't tell you about the buttons though... If your screen turns on without pressing power button or from any other standard event (like receiving a text or a phone call), or the phone restarts by itself, time to get cleaning..
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
Hey thanks, that was very useful.. i risky miself to do a stock flrom flashing with pit checking the Nand erase all option in Odin 3.07, and the random reboots are gone :laugh:. Now i have one question, Do i need an special kernel for JB 4.2.2? i plan to flash the Carbon-jb-v1.6 rom but i dont know if i need another kernel

I'm glad to hear you solved your issue.
For JB, use the kernel provided with the rom.
Sent from my SAMSUNG-SGH-I997 using xda premium