White screen after changing display on Asus P535 - General Questions and Answers

I had phone with dead motherboard, I bought another one with broken screen but it conflicts with my screen - It is white. Display from new p535 also looks bit different from my old display, but connection is same. Is there a solution for my problem or I have to buy another display?

Where have you buy?
I am a pro of PPC LCD?

I've got the same problem- I bought P535 with broken screen and it didn't display anything and was white, so i repalced the screen with a compatible and completely new one. It turns on, the phone function is working, i.e. i can call on the pda when there is a sim card inserted and yet the screen is still white.
What can be the problem?
connectors seem to be OK ... I also tried soft reset but still of no avail.
any help is appreciated
edit:
is it possible that the screen is only lit up because the ribbon connecting lcd to the mainboard is of differnt color than the original?
the seller from whom I have bought the LCD with touchscreen wrote that it will work fine with asus p535 and p525 but in mine the ribbon was golden and in the one that he sent me ribbon is black and the model is different -originial was tdo028steb2 and the new one is td028steb1, although I found on the Internet that tdo028steb1 should work with p535..
I'm losing my nerves and patience... ;/
can anyone please help me with this?

i have the same problem. Thanks a lot for your answer

same problem but on HTC Legend

Related

Screen is blank but touch screen works ***HELP***

I recently got a touch pro of a friend with a damaged screen that didn't turn on but the touch screen was responsive. Apparently he sat on it and the screen broke.
I then acquired it and replaced the LCD screen and i turned it on but all it shows is a blank black screen with the backlight on. I was tapping while it booted up and it was making that beep noise so i know the touch screen works. What do i do now.
dazz245 said:
I recently got a touch pro of a friend with a damaged screen that didn't turn on but the touch screen was responsive. Apparently he sat on it and the screen broke.
I then acquired it and replaced the screen (with digitalizer) and i turned it on but all it shows is a blank black screen. I was tapping while it booted up and it was making that beep noise so i know the touch screen works. What do i do now.
Click to expand...
Click to collapse
if the lcd is damaged and you only replaced the digitizer then that wont solve the problem, the digitizer just sits ontop of the lcd and recognizes your touches, hence why it mite know that your touching the screen but the screen is still blank
mancsoulja said:
if the lcd is damaged and you only replaced the digitizer then that wont solve the problem, the digitizer just sits ontop of the lcd and recognizes your touches, hence why it mite know that your touching the screen but the screen is still blank
Click to expand...
Click to collapse
I replaced the LCD along with the digitalizer. Tats what i meant.
Sounds like either the new screen is inop on fit (fraid you need another to test, then send the first back as faulty), or the fault is not the LCD itself.
Possibily its the wrong screen, or its not installed correctly, or you damaged either the screen or the controller when installing.
I'm afraid you dont have many options - take it apart & rebuild to ensure correct parts & fitment, spend £££ on alternative parts to see whats broken (or serious £££ on test equipment!), send it off for repair or give up!
I'd go for option 1 first
If your friend sat on it hard enough to break the screen, i'd be looking for any damage / cracking to the boards / ribon cable mounts and be looking very carefully at the mountings of any IC chips. Incedently, when (s)he sat on it, did the screen work at all? and was it 100% working before they did?
Okay thanks for the replies. I just bought a flex cable where the slider thing is because the old one looked a bit old and flexed out and on inspection of the old screen i found a tiny rip on the screen's flex cable too. I wait for my cable and see if it works and if it doesn't then i'll sent the screen back as faulty and get a new one and if that doesn't work then I'll give up and sell it again
hi
sorry to wake up an old thread.
so what's your solution/conclusion?
is it the flex, or the LCD that broke?
i have the same problem right now.
thanks
was mainboard

FUZE keypad backlight and LCD backlight problem. Please help...

New Problem :
Please see post #10.
Old Problem ( solved ) :
Hello,
I had told my problem in this thread but got no response so had to create a new thread to see if someone helps.
My problem ( I mean my fuze's ) is :
Firstly my fuze was having few scratches and the digitizer was broken lil in the edge/corner so I thought to replace its digitizer.
Brought new digitizer ( 2 months back ), disassembled the device and while removing the flex cable, broked its buttons strip ( volume and ptt button ) and while removing/separating lcd from digitizer, I destroyed both!
So next I brought new lcd and flex cable. Stupid seller sent touch pro flex cable instead of fuze. Had it return it and the fuze flex cable is on way now.
In the meanwhile, I tried to install new lcd+digitizer and damaged flex cable but I'm getting only backlight and no display/image. Sometimes I get thin RGB/rainbow vertical lines and once or twice I got the display/image too. As the adhesive conductive tapes/fabric/stickers got weaker I brought new copper conductive tape ( Like this ) and sticked them but still I'm not getting display/image and only backlight.
I'm very fedup and stressed about this although spent 100$ and Due to this, I able to cook roms and I'm out of xda dev since 2 - 3 months :'(
If someone could help, you will be greatly appreciated. Please please help!
I don't have money to buy new device either and have no mobile phones to play with since from fuze is dead.
Thanks a lot in advance....
Best Regards
I replaced the lcd in my phone and had the same problem. I later discovered that I didn't have the ribbon connector in all the way. I hope this helps.
you need a working flex cable...the same thing happened with but on a nokia n95...the blacklight was comin but no display changing the flex helped
Cingularman said:
I replaced the lcd in my phone and had the same problem. I later discovered that I didn't have the ribbon connector in all the way. I hope this helps.
Click to expand...
Click to collapse
I'm not a mobile tech.., could you please let me know what/which is a ribbon connector?
Thanks for the help though.
djteotancolis said:
you need a working flex cable...the same thing happened with but on a nokia n95...the blacklight was comin but no display changing the flex helped
Click to expand...
Click to collapse
But had it working once and twice. However, I will get new flex cable in few days.
BTW; I had also tried the new touch pro flex cable and had same issue.
Thanks for the help though.
Best Regards
CRACING said:
I'm getting only backlight and no display/image
Click to expand...
Click to collapse
Hi
I had the same problem last night (wasted 3 hours). Just replaced my LCD as well, broke digitizer was a problem. Anyway, after taking a phone a part 3 time figure out what the problem was.. The two ribbon cables have to touch (mostly likely a ground).. The LCD one and log flex one.. I will try to find you a picture..
Now I have a different problem, can't align the screen properly. The right side on screen is way off.. What a mess..
Green
sadik007 said:
Hi
I had the same problem last night (wasted 3 hours). Just replaced my LCD as well, broke digitizer was a problem. Anyway, after taking a phone a part 3 time figure out what the problem was.. The two ribbon cables have to touch (mostly likely a ground).. The LCD one and log flex one.. I will try to find you a picture..
Now I have a different problem, can't align the screen properly. The right side on screen is way off.. What a mess..
Click to expand...
Click to collapse
sadik007 said:
Green
Click to expand...
Click to collapse
I tried everything but didn't got it working. Though I have doubt on original flex cable that I broken while removing.
I have trouble with getting new flex cable on ebay. First the seller sent wrong flex cable ( TP's which it doesn't fit for fuze ), 2nd time the flex cable lost in shipment and 3rd the seller didn't had stock to resend so refunded.
Now I have brought the flex cable from different seller and its about 14 days and not yet received.
When I tried touch pro flex cable I didn't get the display but only backlight but once or twice I saw the display so I think it was something wrong in my connect. However I didn't had much time to test the device using touch pro flex cable because I had to return it!
This is what I'm playing with my device since 4+ months. Mostly waiting waiting waiting......
Thanks...
Best Regards
I can see that ribbon hold contact.
obaz said:
I can see that ribbon hold contact.
Click to expand...
Click to collapse
The ribbon aka conductive tape/sticker I have is no longer usable. Its adhesive gum is too weak and no longer sticks. I have searched lot to find such conductive tape/sticker and found copper conductive tape/sticker. Using it now.
@sadik007 and all
I got the flex cable today and after testing, I' getting same problem. No display but only backlight. I see some minor rainbow lines which haven't saw before but as said, I checked the grounding and everything seems correct.
Fed up of this and desired to sell it as parts or repairable...
Best Regards
Finally my fuze is back alive.
Got Correct Flex cable and new LCD. Now its working perfectly.
However, a minor problem if anyone can help.
The brightness setting of LCD in settings -> System -> Power -> Backlight seems to work only till 40% and then after it doesn't increase the brightness of the lcd.
In auto mode, its same. I think the brightness is working only upto 40% and then it doesn't increase.
Cannot understand whats but I guess its because the seller gave me diamond lcd instead of touch pro/fuze. As I can see, diamond lcd doesn't have variable resistor and my friend say its a brightness setting.
But the hardware setting should be atleast full and we could decrease through software.
Can body help me how to solve this problem? I guess its not possible.
P.s the brightness from 0% to 40% is not bad to use but may have trouble in sunlight.
Thanks a lot for all your helps...
Best Regards
p.s My problem is something like this but the backlight is working fine.
Edit;
I don't think my FUZE stops giving troubles. New problem started since last night and today.
As the backlight was lil dim on sun light, I went to try Lumos app. Didn't saw any difference, just sucked at 40%
Today when I booted my fuze morning, it started to do some malfunction in LED lights ( LCD backlight and front penal keypad backlight light ). Backlight of keypad is no longer working when pressed its button but buttons work fine. And also if I slide out the hw keyboard, the home button backlight turns ON. and also the d pad circular light and back button backlight.
Cannot under stand what the hell is going on. If I get any SMS or EMail, d pad circular light rounds fine but if I connect USB to charge, d pad circular light doesn't work.
I removed the Lumos app, softrebooted, hardrebooted, and reflashed but still same problem.
Any idea?
I guess I'm stupid or the device is fooling me.
Thanks again...
Best Regards
Bump...
I don't think my FUZE stops giving troubles. New problem started since last night and today.
As the backlight was lil dim on sun light, I went to try Lumos app. Didn't saw any difference, just sucked at 40%
Today when I booted my fuze morning, it started to do some malfunction in LED lights ( LCD backlight and front penal keypad backlight light ). Backlight of keypad is no longer working when pressed its button but buttons work fine. And also if I slide out the hw keyboard, the home button backlight turns ON. and also the d pad circular light and back button backlight.
Cannot under stand what the hell is going on. If I get any SMS or EMail, d pad circular light rounds fine but if I connect USB to charge, d pad circular light doesn't work.
I removed the Lumos app, softrebooted, hardrebooted, and reflashed but still same problem.
Any idea?
I guess I'm stupid or the device is fooling me.
Thanks again...
Click to expand...
Click to collapse
Same problem.
Backlight setting changes only 1-4 interval and does not brighten 5 and more.
I had heard that problem one sells his tp which's lcd replaced.
Options:
1) while replacing, flex can be damaged. I do change screens for 6 years and hard to beleive it.
2) keypad membrance can be damaged while replacemnt of lcd. More harder than option 1.
3) eBay sellers sells fake lcd screen.
I handle over 5 diamond and tp screen far away and still keep some cracked ones. They all different from each other. Somehow there must be different versions of these lcd's.
By the way I also tried a diaond lcd and it gives same error.
first 4 step is ok but no more 5 to 10 steps working.
Problem was solved:
HTC P3700 LCD and P4600-T7272-touch Pro LCD screens are different.
here is the differences illustrated on photos:
@sokomind
nice find. Yeah I do see the changes from touch pro lcd and diamond lcd. touch pro lcd has 10 led levels and diamond has only 5.
Part No :
Diamond LCD with 5 LED brightness levels : 60H00130-00M
Touch Pro LCD with 10 LED brightness levels : 60H00129-00M
29 is what we need for Touch Pro but in ebay sellers don't know the difference of these lcds. They ship what ever stock they have. I had requested to send Touch Pro LCD and also said the part no but they sent the diamond LCD.
Damaged 3 times in shipping and when I got the working one, it was diamond lcd.
Anyways, now I'm using the device has a 3g data card and 3g router. Working g8.
Thanks...
Best Regards
I still have the problem as #"10 cracing.
I got a diamond lcd and then ordered a touch pro lcd.
Yes TP LCD is brighter but it is still working 4/10 on brightness. And then I see that my flex cable has lost one of the way. I try to fix it but it still give me 4/10. I do not know if it fixs a new flex. I do not want to spend $20 more.
Have you spare TP flex not fuze?

Xperia Z3-Black backlight only,no image.

Hello. I got this Z3 with a broken screen, when I got it it had only black backlight, no image, but the LCD cable on the bottom was cut, so I thought that was why it had no image.
So I replaced the screen with a new one, but the issue remains, no image, only black backlight.
Tried restoring the software with Sony PC companion, updated to latest version, but it didn't help.
The phone boots fine, touch works, I can select options and sometimes I even get audio readouts of what is on the screen, just no image.
Is this a dead motherboard or something else? Because I went through a couple of new screens, none worked, so I'm out of the ideas.
I haven't encountered a case like this before, the screen either works or doesn't, the fact that the touch works and I have backlight puzzles me. No backlight or no touch issues are a common case to me, but this is a new one.
Can someone help here?
Thnx
Same problem....
Hi all.I have the same problem and tried few screens with no luck.If I get z3 compact on hd tv via hdmi cable I can see that it works but no image on lcd only backlight and touch works.Did you find out what causes this problem?
egres said:
Hi all.I have the same problem and tried few screens with no luck.If I get z3 compact on hd tv via hdmi cable I can see that it works but no image on lcd only backlight and touch works.Did you find out what causes this problem?
Click to expand...
Click to collapse
It's a faulty LCD connector on the motherboard, in my case. Not the connector itself but the small jumper just above it, it gives power to the LCD, it was broken off.
I had it resoldered. Works fine now.
Could ju point me a bit closer whitch one it was?Did you get no image at all or something like the one on my picture?https://drive.google.com/open?id=0Bym65RPW_fIpeXlkX2NTYUw5SVk This is how mine looks like around the lcd connector.https://drive.google.com/open?id=0Bym65RPW_fIpTXZpWTFKby1Ua3c
egres said:
Could ju point me a bit closer whitch one it was?Did you get no image at all or something like the one on my picture?https://drive.google.com/open?id=0Bym65RPW_fIpeXlkX2NTYUw5SVk This is how mine looks like around the lcd connector.https://drive.google.com/open?id=0Bym65RPW_fIpTXZpWTFKby1Ua3c
Click to expand...
Click to collapse
No image at all, only black backlight ant the touch was responding.
The three square fuses on the bootom of the picture, it's similar in Z3, in my phone one of those was broken off.
Hi guys. I have almost the same problem but inverted. My display and touch is working but i dont have backlight. I can see the screen only if i put light on it.
Maybe u guys have a faulty digitizer responsible for image faulty(no image), better for send repair, flashing new stock firmware will not help
I tried with new digitizer, no luck. Tried jumping the fuse with no luck. Don't know what to try anymore.
GreatVortex said:
I tried with new digitizer, no luck. Tried jumping the fuse with no luck. Don't know what to try anymore.
Click to expand...
Click to collapse
egres said:
Could ju point me a bit closer whitch one it was?Did you get no image at all or something like the one on my picture?https://drive.google.com/open?id=0Bym65RPW_fIpeXlkX2NTYUw5SVk This is how mine looks like around the lcd connector.https://drive.google.com/open?id=0Bym65RPW_fIpTXZpWTFKby1Ua3c
Click to expand...
Click to collapse
Put the motherboard in the oven and bake it for a few minutes, it resold everything, if that's the problem, it will fix it.
For more infos and temperature / time, google it
Same problem here! i have tried new lcd, new flex cable. nathing works, lcd backlight turn on but no image, touch work cause i feel vibration while touching the lcd.
Pleas Helpppp Anyone with the genius mind??????
I'm facing the same problem with my Z3C, a friend of mine told me he applied this method on his phone and it worked but i'm not sure how to do it.
http://www.mobilerdx.com/2015/03/sony-xperia-z3-display-lighting-problem-repair-solution.html
z3 no display but backlight on
by jumperig the fuse near lcd conector it turns on the backlight .There is another fuse surrounding power manager ic which may got open & display ic is not powering.

Only black light on my phone after replacing LCD

Hello all,
I have tried looking for a solution for this problem, but none can be applied to my case, so here it is: I have a UMi Iron Pro, and after the screen cracked earlier this year, I ordered a new LCD + Digitizer. I have now replaced the screen, but when I turn it on, it only emits black light. The phone does charge (according to the notification light) and my laptop recognizes a USB device when I connect it. However, the phone is quite useless now...
So, does anyone know what could have caused this problem? I am happy with any input.
Thanks in advance, Dennis

Screen black but phone works - LG Nexus 5

Hey everyone!
As you see on the title my screen is black even I can hear the notification sound, The LCD display has been changed because the old one was broke and I thought that was the problem, then I changed the LCD display, it stays black. And after reading some suggestions says the flex cable should be the problem, I changed it too, NOTHING RESOLVED THE PROBLEM.
Note: all parts ordered on Aliexpress.
Thanks for giving any suggestions or solutions.

Categories

Resources