Database Info

accessing 3g

I have an unlocked touch cruise with t-mobile in the us, but don’t understand how, or if I can, use the 3g function for internet data access. My questions are as follows:
1. How do I find out if my phone is the European version or the US version (each has differing specs on accessing the 3g network).
2. If it is the US version, will I be able to access the 3g network on t-mobile or AT&T in the US?
3. If it is the European version, will I be able to access the 3g network.
4. How do I know whether my phone is accessing 3g or not?
5. Is there a software fix to allow me to use either the European version or us version to access 3G.
Thanks in advance for any help you can offer.
Dave

there's only one version of the Cruise out:
http://www.htc.com/www/product.aspx?id=798
These are the frequencies:
Network HSDPA/UMTS: 2100 MHz (Europe), 850/1900 MHz (USA)
HSDPA: Up to 384kbps for upload and 3.6Mbps for download
UMTS: Up to 384kbps for upload and download
GSM/GPRS/EDGE: Quad-band 850, 900, 1800, and 1900 MHz (The device will operate on frequencies available from the cellular network)
It's triband 3G. It is currently working on ATT 3G in the US. I don't know about TMobile is there 3G network up and running, and if so I don't remember what frequency that might be at.
The icons at the top point to what type of network E/G is Edge, while 3G/H is 3G.
You can go into the Phone Settings under Band and see some of the different frequency choices. You can force it to be on Edge/GSM there or Auto (which will pick up 3G if it's available).

3 g access
hambola said:
there's only one version of the Cruise out:
http://www.htc.com/www/product.aspx?id=798
These are the frequencies:
Network HSDPA/UMTS: 2100 MHz (Europe), 850/1900 MHz (USA)
HSDPA: Up to 384kbps for upload and 3.6Mbps for download
UMTS: Up to 384kbps for upload and download
GSM/GPRS/EDGE: Quad-band 850, 900, 1800, and 1900 MHz (The device will operate on frequencies available from the cellular network)
It's triband 3G. It is currently working on ATT 3G in the US. I don't know about TMobile is there 3G network up and running, and if so I don't remember what frequency that might be at.
The icons at the top point to what type of network E/G is Edge, while 3G/H is 3G.
You can go into the Phone Settings under Band and see some of the different frequency choices. You can force it to be on Edge/GSM there or Auto (which will pick up 3G if it's available).
Click to expand...
Click to collapse
As I understand it (for internet data access) the european version (as alluded to in your quote) works at Network frequency: HSDPA/UMTS: 2100 MHz (Europe), the American version at the frequencies: 850/1900 MHz (USA). If my phone is the european version, then it works at 2100, and will not access usa networks, unless there is a fix.
t-mobile is 3G in my area.
How to I access the "phone settings under band". I cannot find this on my phone.
Thanks

What I am saying is the device can function on all 3 frequencies listed on the specifications page. I believe the Tmobile 3G frequencies are 1700/2100. You might want to search on the forum and check it out for sure. If it is 1700 you are out of luck. Here are some threads discussing it.
http://forum.xda-developers.com/showthread.php?t=427700
http://forum.xda-developers.com/showthread.php?t=417437
http://forum.xda-developers.com/showthread.php?t=391339
http://forum.xda-developers.com/showthread.php?t=390449
Go to Start -> Settings -> Band tab. If you don't have it, there is a registry tweak that enables that tab.

3 g access
hambola said:
What I am saying is the device can function on all 3 frequencies listed on the specifications page. I believe the Tmobile 3G frequencies are 1700/2100. You might want to search on the forum and check it out for sure. If it is 1700 you are out of luck. Here are some threads discussing it.
http://forum.xda-developers.com/showthread.php?t=427700
http://forum.xda-developers.com/showthread.php?t=417437
http://forum.xda-developers.com/showthread.php?t=391339
http://forum.xda-developers.com/showthread.php?t=390449
Go to Start -> Settings -> Band tab. If you don't have it, there is a registry tweak that enables that tab.
Click to expand...
Click to collapse
hmmm, htc told me there were two versions that the european version does not have the capability to switch to the us frequencies, which the specs list as 850 / 1900, but is only using the 2100 frequency. I'm not sure htc tech support is always accurate.
However when I go to the band tab via comm manager, settings, phone, band, it shows me (found with your assistance) that I can select gsm (1900 + 850) + UMTS(1900+850). I assume I should use this setting rather then auto.
T-mobile claims they use the 1900 and 850 bands. I am still at Edge.
I have not had time to read the threads you listed, and will do that later today. Perhaps I will have more questions then, but for now, did I select the correct gsm settings?
Thanks,
Dave

3g access
ok, read the posts you mentioned.
More information about differing versions
from phonescoop.com:
Versions of touch cruise for different regions support different 3G frequency bands.Eurasian version is WCDMA 2100 only)
I assume that since the 850 and 1900 is listed in my setup program, I have the usa version, if phonescoop is correct about two versions.
Since t-mobile works on 1700 I assume I cannot have 3g with them.
Will I get 3g with AT&T?

i personally have never heard of 2 different versions of the Cruise. I have one presumably imported from the UK and works on 3G here.

Btw the Cruise manual says this:
FunctionalityHSDPA/UMTS: 2100MHz for Europe, 850/1900MHz for USA HSDPA: Up to 384kbps for upload and 3.6Mbps for download UMTS: Up to 384kbps for upload and download
GSM/GPRS/EDGE: Quad-band (850, 900, 1800, and 1900)
There is only one version of the Cruise.
Also a caveat about the bands available in the Band tab of the Phone Settings. I believe some options might be available in the drop down even though the phone doesn't support it. Best thing is to look at the phone specs.

Mmmm... My Polaris shows this:

Bodisson said:
Mmmm... My Polaris shows this:
Click to expand...
Click to collapse
Bodisson said:
Mmmm... My Polaris shows this:
Click to expand...
Click to collapse
Bodison,
My phone has the same features in your picture.
1. Hambola states
"Also a caveat about the bands available in the Band tab of the Phone Settings. I believe some options might be available in the drop down even though the phone doesn't support it. Best thing is to look at the phone specs."
suggesting what's in the picture may not be in the phone.
2. He also states:
a.
"FunctionalityHSDPA/UMTS: 2100MHz for Europe, 850/1900MHz for USA HSDPA: Up to 384kbps for upload and 3.6Mbps for download UMTS: Up to 384kbps for upload and download
GSM/GPRS/EDGE: Quad-band (850, 900, 1800, and 1900)
b.There is only one version of the Cruise."
The phone specs restate what he states in 2a.
A and B seem to contradict one another. Unless it means that the phone is capable of all the MHz frequencies mentioned (850, 1900, and 2100), and when used in Europe it accesses 2100 frequency, and in the US the other frequency. This is not clearly stated in the specs.
If the allusion to functionality does not mean that the frequency used depends on where the phone is used, then therefore there are two versions, with hsdpa/umts for europe (2100) and another for USA (850/1900). In any case, HTC (probably not the ulimate source of reliability) states that there are indeed two versions.
According to Hambola's reference to the caution that what is in the picture may not be in the phone, what is in the picture shows what is in the specs of the phone. He is therefore suggesting that what is in the specs of the phone (as shown in the picture) are not reliable. Not sure what the implications of this are.
I have been reading other posts about 3g with ATT. Is it safe to assume that (if there is one version of the phone, or I have the one that is able to access the US bands as shown in Bodison's picture), that I will be smokin when I switch to ATT in January when my contract runs out?

I am pretty sure there is only one version of the Cruise and it has those 3 bands listed for 3G. In fact there are guys on this forum that have the UK Orbit O2 running on the ATT 3G stateside.

3 g access
In any case, I tested my phone with a buddy's ATT sim card and was able to access 3G for browsing just fine.
I agree there is one version, though the HTC rep told me otherwise, he was probably....

3G Frequencies

Is there a way to change the 3G Frequencies on the G1 to support AT&T 3G network?

Nope, thats a hardware issue.

I thought it was possibly a software issue. If not, is there a way to change out the chip or the incompatable part to make it compatible?

card13 said:
I thought it was possibly a software issue. If not, is there a way to change out the chip or the incompatable part to make it compatible?
Click to expand...
Click to collapse
Nope...not going to work for many reasons.

been answered plenty plenty of times.

From what I can figure a hardware change may not be required with the correct radio but we dont know the right radio without the right hardware. lol I know that makes no sense but it makes as much sense as anyone can make of it thus far. When its possible I assure you I will be among the first to do it. Although Im not ready to try installing a new radio without first acquiring a backup phone but if I do Im gonna give it a try and maybe have better luck than the last guy to try.

What about a mini-usb attachment that can receive atnt signals?
I am sure with that and the right software manipulation it could work.

sjbayer3 said:
What about a mini-usb attachment that can receive atnt signals?
I am sure with that and the right software manipulation it could work.
Click to expand...
Click to collapse
While it sounds great in theory I doubt anyone would put forth the resources for such a limited market.
You would be best off getting android to work on existing AT&T hardware.

in order to do it we would need hardware which would plug in the bottom and software to tell the phone to use the signal from the attachment.
while there wouldnt be millions in the market i guarantee there are hundreds.
if anyone wants to think about it i dont mind making 50 of em and selling for cost. i have some hook ups in the engineering field i work in

ok, my question is... Europe 3g is diff than tmob usa 3g, but is tmob europe the same 3g setup as US? and if europe 3g is same as tmob europe 3g, is att US 3g same as europe 3g. so if tmob europe is same as europe 3g then a europe g1 should work on att US 3g. am i coming thru clear or am i jumping all over?
Shaggy

Shagman68 said:
ok, my question is... Europe 3g is diff than tmob usa 3g, but is tmob europe the same 3g setup as US? and if europe 3g is same as tmob europe 3g, is att US 3g same as europe 3g. so if tmob europe is same as europe 3g then a europe g1 should work on att US 3g. am i coming thru clear or am i jumping all over?
Shaggy
Click to expand...
Click to collapse
The American G1 has 3G support for HSDPA 1700 MHz & 2100 MHz, both bands I believe are used by T-Mobile. In Europe I believe they use only 2100 MHz band for 3G.
AT&T on the other hand uses 850 and 1900 MHz HSDPA
The phone has the capability for 2G at 850 and 1900 MHz, so technically it can be used on their network, just not at 3G speeds.
Although technically it's possible to design a Phase-Locked Loop to operate at a variable frequency and to be tuned with jumpers or something, it's probably cheaper for them or they might be subsidized to make phones so that they are exclusive for one network in the US.
To me the ideal is more about standardizing the protocols and the frequencies used for all companies, and having all bands available for traffic. But at least in the short-term that's not really good for business and so probably won't happen for a while.
This is all based entirely on a limited amount of research and my opinion, take it for what it's worth.

Europe uses 1900/2100 in a pair (1900 is the uplink, 2100 is the downlink). (source)
Most phones produced these days are tri or quad band and can work (almost) anywhere.. I'm surprised the G1 isn't.

Shagman68 said:
ok, my question is... Europe 3g is diff than tmob usa 3g, but is tmob europe the same 3g setup as US? and if europe 3g is same as tmob europe 3g, is att US 3g same as europe 3g. so if tmob europe is same as europe 3g then a europe g1 should work on att US 3g. am i coming thru clear or am i jumping all over?
Shaggy
Click to expand...
Click to collapse
TonyHoyle said:
Europe uses 1900/2100 in a pair (1900 is the uplink, 2100 is the downlink). (source)
Most phones produced these days are tri or quad band and can work (almost) anywhere.. I'm surprised the G1 isn't.
Click to expand...
Click to collapse
*sigh*.
Folks, you need to learn about UMTS bands before complaining about that the G1 or any other phone can't do this or that when it certainly can.
The G1 is a 3g worldphone. It works on the US 1700 AWS network (UMTS Band IV) and works on the world's 2100 network (UMTS Band I). ATT uses the 1900 Band (UMTS Band II).
Apparently the common names for these networks is being confused with the actual operating frequencies because they don't upload and download on the same frequencies. The 1900 band is not the same as the 2100 band, even though the 2100 band (UMTS Band I) uploads in the 1900mhz frequency and downloads at the 2100mhz frequency range. The 1900 Band (UMTS Band II) uploads on the upper half of the 1800mhz and downloads on the 1900mhz frequency range. UMTS Band II uploads on the frequencies that UMTS Band I downloads.
These bands separate.
TMO 3g band is different from ATT 3g band which is also different from EU 3g band.
The 1700 band (UMTS band IV) is actually made up of 2 frequency ranges like the other bands I and II are: 1700mhz and 2100mhz. In fact, the 2100mhz download range for UMTS Band IV is within the same frequencies used for the Band I download range, theoretically making it cheaper/easier for manufacturers who make Band I phones to "support" UMTS Band IV phone production.
Most phones produced today are NOT "tri or quad-band" 3g phones. In fact, I have yet to find a quad-band 3g phone. If quad-band 3g phones were made, they would be very likely to support the T-Mobile 3g network, because it's the 4th largest UMTS band type (behind Band I, II, and V). I would be very shocked to find a phone which was 2100/1900/900/850 instead of 2100/1900/1700/850.
And the G1 is a worldphone. It works just fine on UMTS in Europe. It is a band I and band IV device.
read these 2 links:
http://www.htc.com/www/product/g1/specification.html
http://en.wikipedia.org/wiki/UMTS_frequency_bands#UMTS-FDD
So to clarify, when you see a list of support bands, this is what you should interpret from those advertised bands:
2100 Band = UMTS Band I (The entire world outside of North America)
1900 Band = UMTS Band II (The Americas, ATT)
1700 Band = UMTS Band IV (The Americas, TMO)
900 Band = UMTS Band VIII (Australia)
850 Band = UMTS Band V (The Americas, ATT)
Outside of North America, the 2100 band is almost universally deployed, even where the 850,900,1700 or 1900 band is deployed.

[Q] aonly working in 2G mode in Mexico

Hi All,
I recently bought a HTC-Sensation 4G from T-Mobile Store in US.
I also purchased an unlock code in the internet.
Getting to Mexico I started the phone and the voice portion worked great...
BUt Data only hooks up at 2G speed, I have a 3G with unlimited data plan...
I have a friend who has an HTC-INSPIRE and his does hookup at HSPA/HSPA+ (3G).
I was told buy a compnay in Mexico that sell a version of the sensation 3G, which they say does have 850 MHZ radio, that T-Mobile Sensations does not have the 850MHZ Band required...
But in various sights I have seen the spec and it says I qoute "Bands 850, 900, 1800, 1900, 2100, 1700"
I have checd the settings menu etc.. and have not found anywhere to change the setting... can someone help?
Thanks,
Peter Fraga

PeterFraga said:
Hi All,
I recently bought a HTC-Sensation 4G from T-Mobile Store in US.
I also purchased an unlock code in the internet.
Getting to Mexico I started the phone and the voice portion worked great...
BUt Data only hooks up at 2G speed, I have a 3G with unlimited data plan...
I have a friend who has an HTC-INSPIRE and his does hookup at HSPA/HSPA+ (3G).
I was told buy a compnay in Mexico that sell a version of the sensation 3G, which they say does have 850 MHZ radio, that T-Mobile Sensations does not have the 850MHZ Band required...
But in various sights I have seen the spec and it says I qoute "Bands 850, 900, 1800, 1900, 2100, 1700"
I have checd the settings menu etc.. and have not found anywhere to change the setting... can someone help?
Thanks,
Peter Fraga
Click to expand...
Click to collapse
Sorry, but the US T-Mobile Sensation does not have the 3G 850 frequency. You can't change it. It does support 2G 850, which may be part of the confusion in the frequency listings you've seen. About your only option is to sell it and get the Mexico compatible model.

Your only way arround it is to sell it and get the sensation from bell canada.
Sent from my HTC Sensation 4G using XDA App

PeterFraga said:
I was told buy a compnay in Mexico that sell a version of the sensation 3G, which they say does have 850 MHZ radio, that T-Mobile Sensations does not have the 850MHZ Band required...
But in various sights I have seen the spec and it says I qoute "Bands 850, 900, 1800, 1900, 2100, 1700"
Click to expand...
Click to collapse
Buyer beware.
Lesson one: Every modern phone out there now has quad-band GSM, and will list "850, 900, 1800, 1900" in its frequency list. You know they're talking about GSM (2G) when you see that string of four numbers, because 1800 is a 2G-only band which has never been used for 3G.
Lesson two: If a phone has 850 MHz 3G, you will see the number 850 repeated twice in its band list.
For example:
GSM 850/900/1800/1900 UMTS 850/1900 <--- Yes, buy this phone, because you can see 850 repeated twice.
GSM 850/900/1800/1900 UMTS 900/2100 <--- No, do not buy this phone, because 850 is listed only once and it's under GSM.
Lesson three: If the only band info you can find is 850/900/1800/1900, then the seller is a lazy douchebag who can't even bother to give you the 3G information you need to know.

[Q] Does huawei ideos support T-Mobile 3g?

Hi
I was told this would be a better forum for this question.
I have a huawei ideos (older non X6 version) and supposedly it is unlocked. It works with 2g/edge. It does not work with t-mobile 3g. I have looked for APN information and the info downloaded to the phone when I connected to t-mobile network is identical to what is listed on the net.
ie. I added
MMSC: http<colon><twoslash>mms.msg.eng.t-mobile.com/mms/wapenc
xxx added because I can not post urls.
Things which are odd. When choosing access network, it does not say T-mobile 3G. It only says T-mobile 2g, Att 2g and Att 3g. According to the net this phone supports the frequencies for tmobile.
gsm link for u8150 not allowed.
shows HSDPA 900 / 2100 / AWS
HSDPA 850 / 1900 / 2100 / 1700
And the wikipedia entry for tmobile
shows
1700 MHz/2100 MHz UMTS (W-CDMA)/HSPA 4G (formerly 3G[31]) 2006 2008 (3G), 2010 (Marketed as 4G) First carrier in the U.S. to deploy services on AWS frequencies. Markets HSPA+ as "4G". UMTS band IV
Not sure if HSPDA spec is same as HSPA though.
I did the trick where you enter #*#*4636*#*#* and checked phone settings. I changed the setting from CDMA to GSM auto (PRL). I also tried to hit menu and select radio band, but it pulls up an empty "Set GSM/UMTS Band" dialog. There is nothing to select.
I guess my question is, does this phone support 3G for t-mobile and if so, what setting am I missing?
thanks in advance.
John

I got an email from Huawei support
Hi,
Just as another data point. I got an email regarding this issue from Huawei support. They said an unlocked phone from one provider may not fully support 3g on T-Mobile. I asked them what he meant by not fully support.
Here is an excerpt from the Huawei email:
This phone is capable to be used in 3G that is correct, however if the phone is unlocked from the original provider it may not be fully compatible on 3G on the different providers network.
Click to expand...
Click to collapse

Please use the Q&A Forum for questions Thanks
Moving to Q&A

three more datapoints
Hi
I got another note from Huawei. They said they don't support unlocked phones.
I talked to t-mobile support. They said the u8150 uses PPP and not RMNET. I have never heard of RMNET, and that the phone would only support 3G if it was rooted.
This seem like BS all around to me. T-mobile and Huawei.
I did test my phone with a friends tmobile sim and the phone behaved the same. ie. edge only.

Some more datapoints
Hi
This phone is available in two different frequency capabilities. Considering mine can see the ATT 3G network, it must be using the second set of frequencies. This second set is listed as usable by T-Mobile as well. Here is the info:
From the huawei spec sheet.
At the top it shows
UMTS 900/AWS/2100MHz or
UMTS 850/1700/1900/2100MHz;
EDGE/GSM/GPRS: 850/900/1800/1900MHz
According to Wikipedia
ATT
850 MHz GSM/GPRS/EDGE 2G
1900 MHz GSM/GPRS/EDGE 2G
850 MHz UMTS/HSPA 3G
1900 MHz UMTS/HSPA 3G
700 MHz LTE 4G
T-Mobile
850 MHz GSM/GPRS/EDGE 2G
1900 MHz GSM/GPRS/EDGE 2G
1700 MHz/2100 MHz UMTS (W-CDMA)/HSPA 4G (formerly 3G[31])
When I connect to wireless networks, I see three choices:
T-Mobile 2G
AT&T 2G
AT&T 3G
So I am guessing my u8150 is using the second UMTS set of frequencies:
1. 850 (since it sees two edge networks and that is only available in the second set.)
2. 850 and 1900 (since it see's AT&T 3G and it is also in the second set)
This second set of frequencies is also used by T-Mobile so I don't understand why this phone can not connect to T-Mobile 3G using my simcard or my pals.

It's all about the supported 3/4g bands. Most carrier Androids only support their networks spectrum's. Check gsmarena to ensure compatibility.

Hi,
Thanks for the info. Maybe I don't understand, but I thought gsmarena showed this phone as using both the Att and Tmobile bands. I remember when I had nexus ones was that one version was for ATT 3G and one was for TMobile 3G. I'm guessing that the 8150 is similar with the exception that huawei has not published accurate docs. ie. their docs say both frequences for all phones when in reality its two different model phones with only one label.

netskink said:
Hi
I got another note from Huawei. They said they don't support unlocked phones.
I talked to t-mobile support. They said the u8150 uses PPP and not RMNET. I have never heard of RMNET, and that the phone would only support 3G if it was rooted.
This seem like BS all around to me. T-mobile and Huawei.
I did test my phone with a friends tmobile sim and the phone behaved the same. ie. edge only.
Click to expand...
Click to collapse
I apologize for not reading all of your posts
This isn't BS. It's the same issue facing Cricket phones attempting to connect on Verizon. I'm not fully up to speed but it looks like RMNET needs to be added via the kernel (edit sources and compile).
The below thread isn't specific to Tmo but it should give you some insight.
[04JAN][TMOUS]CMYLXGO's Stripped & Squashed Stock Desire HD[KERNEL:gauner1986][RMNET]
This is what Huawei meant by "may not be supported". However, if the phone connected to Tmo with SIM then it's already carrier unlocked. You now face the above issue plus prl, etc.
You face a long road ahead. My suggestion, sell the Huawei and buy a used Tmo Android.

Model N915W8 from Rogers, is it wind/mobilicity compatible??

I have a Samsung Note Edge model N915W8 I recently got it unlocked from Rogers but when I try to activate it on wind mobile the phone picks up as roaming based on the specs it should be AWS compatible anyone have their N915W8 running on wind or mobilicity?

Model n915w8 does not work with aws

That's weird since the specs say otherwise. I was hoping it was just a software thing blocking the baseband similar to the s4

the1nonly214 said:
That's weird since the specs say otherwise. I was hoping it was just a software thing blocking the baseband similar to the s4
Click to expand...
Click to collapse
Actually, unlike Note 4 N910W8, Note Edge N915W8 does NOT have 3G AWS band needed for Wind/Mobility.
3g umts(w-cdma) frequency: 850, 900, 1900, 2100 MHz
4g lte(lte-a) frequency: 700, 850, 1700, 1900, 2100, 2600 MHz
It does, however, have the AWS band (1700) for LTE. In theory, it should work once Wind gets LTE next year.

That was probably where I was erroneous with my thinking I saw the 1700 band but it was for lte not 3G thank you for the clarification your help is much appreciated

Physically have tested 3 units and none of them work.... I don't have the Platinum balls to drop the Qcn from N915T on N915W8.... it can cause major issues with network... also the Stock Rom is not up for N915W8 as well....

I can vouch that the n915t from T-mobile works on T-mobile (obviously), ROGERS LTE, Bell (Telus) LTE, Fido LTE, and WIND (no LTE but that other poster said they are getting it next year). I tell my friends get a T-mobile phone and unlock it since T-mobile has both sets of frequencies.
the1nonly214 said:
That was probably where I was erroneous with my thinking I saw the 1700 band but it was for lte not 3G thank you for the clarification your help is much appreciated
Click to expand...
Click to collapse

spiderlily said:
Actually, unlike Note 4 N910W8, Note Edge N915W8 does NOT have 3G AWS band needed for Wind/Mobility.
3g umts(w-cdma) frequency: 850, 900, 1900, 2100 MHz
4g lte(lte-a) frequency: 700, 850, 1700, 1900, 2100, 2600 MHz
It does, however, have the AWS band (1700) for LTE. In theory, it should work once Wind gets LTE next year.
Click to expand...
Click to collapse
I checked both Rogers and Bell, both indicated that there's AWS (3G) bandwidth which makes the Edge should work with Wind. It could be the APN settings need some changes to it

hpacura said:
I checked both Rogers and Bell, both indicated that there's AWS (3G) bandwidth which makes the Edge should work with Wind. It could be the APN settings need some changes to it[/QUOTE
I am facing the same problem
as just bought the phone but it is not working on wind
Click to expand...
Click to collapse

hi
just surfing found below
http://forum.gsmhosting.com/vbb/f71...qcn-files-done-asansambox-1880112/index3.html
"As always Here is a Modified QCN that I made for the Galaxy Note EDGE [SM-N915T Tmobile USA]
I edit the IMEI address so you wont have issues with it ....
SM-N915T_MPSS.DI.3.0.c5-00294-M9625TAARANAZM-1.6549.1_18-12-2014_15-13-18001
can some one guide to install in the phone
and is it is safe use

windmobile samsung galaxy note edge.
did you buy the phone outright? where did you get it from? did you try to change the apn in settings. heres a site with all the info for windmobile.
apn-canada.gishan(dot net)/settings/834_8_wind_apn_settings_for_samsung_galaxy_note_edge.php
Please do me one favor answer the questions here and let me know if it worked or if you found or find a way to make it work. i lost my phone so im paying for wind bill with no phone. i love the note so i was going to buy the note edge but theres no store that sells just the phone tied to no carrier. let me know if you know a place where i can get the phone that is unlocked to all modes. i know some phones have it. thanks please email me and add the post here to [email protected]
just take out this (dot net) for .net

Does the N915W8 work with freedom mobile now?