Related
hilo,
Just created a new thread for this as its issues are pilling up the other one. i think that thread should be clean and should have only and only contain info about progress on the wm6 rom...
Mods if unnecessary please delete...
Tejas
I would not call it a bug but one of the disadvantages of the ROM is that, similar to these ones which come to Qtek and i-mate, it does not recognise the network settings out of the box but you have to fiddle with them manually. When I use Orange ROMs (and it does not matter if the ROM comes from the UK or Switzerland) everything works with flying colours, despite I do not use any Orange network. Just I have to install Opera Mobile (I hate pocket IE) and voila! Everything works!
Channels don't work.
in india AFAIK channels just provide the cell id i.e the area which i m in... not imp though... no use of channels
ok phil.
if u remove windows update, at least supply it as a cab in the extras folder.
channels don't work.
long pressed side button does not work! it used to start voice note record for the sda and i'd like that to work.
mms.
better camera software. btw htc camera makes the phone SLOW..... not a good one. need an alternate
enable profile switching to silent when long pressing '#' key
default folder for saving pictures on storage card is not my documents\my pictures any more but a lame dcim folder. that would be nice to be changed.
also, sometimes when answering a call, the keyboard stays locked, the call is still on, but the home screen is active and not the call screen.
joystick seems much better but sometimes it doesn't want to work as it should. maybe another driver; if not, this one is good
we need wpa2 for wifi enabled.
also add in the extras folder:
moblue
tcpmp with extra codecs
htc audio manager could be good
if u need the cabs for moblue and htc audio, i have them
there is an newer version of sim manager. v6.10. has a couple of new things (got it if u need it)
and maybe add a good version of opera. not the java one.
we also need a good midlet manager
also a good instant messaging program. maybe a multi client one like oz mobile im, or like im+
mmmhhh after read all this bugs, i better wait a while to update my phone, i find a good idea to write here all the problems with the actually ROM.
Good AD2P drivers
Hi,
Is it possible to have good ad2p drivers with the next rom?
Tomtom 6
I have never been able to run tomtom 6 before the update.
Is it possible now with update? and also which is best version to install?
Kindest regards
I have Push mail configured and GPRS seems to be buggy. once or twice a day GPRS seems to stop working. My Activesync fails with (Can not connect to network or waiting for the network to be available), and in that mode even IE can not connect to any site. I switch off and on the phone function only, GPRS becomes available again.
boneym said:
I have Push mail configured and GPRS seems to be buggy. once or twice a day GPRS seems to stop working. My Activesync fails with (Can not connect to network or waiting for the network to be available), and in that mode even IE can not connect to any site. I switch off and on the phone function only, GPRS becomes available again.
Click to expand...
Click to collapse
Actually I would split your post in two separate ones.
1. the instability of WM6 Alpha - obvious thing, and it should be fixed
2. but I also see something else. I see from many posts that one application which sets all the settings with one click is quite urgently needed. I know that something like that exists for Swiss networks http://www.mysmartphone.ch/Freeware/kommunikation/16920.aspx and for the Norwegian ones http://www.smartmobil.no/Article617.phtml but I think that everybody would agree that such an universal solution would be something good. Unfortunately, I do not know anything about programming but I can imagine this kind of program and a separate database. The database would be filled by volunteers - I can, for example, provide all the settings of Polish operators, someone else British, French, etc. It would be good esp. for people who travel a lot.
unlocksmith said:
I have never been able to run tomtom 6 before the update.
Is it possible now with update? and also which is best version to install?
Kindest regards
Click to expand...
Click to collapse
TomTom 6 is made for Pocket PCs. It requires a touch screen to work, so you won´t be able to control it. I have had it running on my 8310 but it´s just silly to even have it installed. Go for 5.2 if you can find it.
I have problems syncing my contacts if i have more than 305 contacts.
The ActiveSync (or WMDC) hangs saying "attention required". Though, i can make 305+ contacts on the WM6 and sync them back to Outlook! But backwards i get 305 contact limit. Vey, very strange!
With previous ROM everything was ok.
I tried syncing with different PCs, tried unistalling ActiveSync and WMDC - no use. Deleting pim.vol doesn't help too.
ActiveSync on WM6 gives me 0x8503001c error.
Thanks for your help. I got my old one to work. I really like the colours in tomtom 6 tho.
Also on my phone i have a problem(s) with tomtom 5, I cant type in the post code B8 followed by anything like B8 3NU. Also I can't use certain Points Of Interest such as hospitals or cash dispensers. These work fine on my Wizard but I wana be able to do it all with TORNADO!
The software of dual sim selector don't works with that new rom (adapter of 10ª generation).
Well, I don't know if it works; the soft does not appear by any side.
I proved several solutions, but no it has worked to me.
Somebody can help me?
Thanks.
tejasphatak please rename the topic to "WM6 Torando bugs/issues" , so we can generally post bugs/issues regarding all WM6 tornado roms
Bugs:
1. The locklevel change to 1 randomly..
2. Sometimes the phone freeze when unloking kepyad.
It happened two times.
Issues:
1. When playing audio the CPU load is ~ 25-30% (@180 Mhz). It is normal ? (can someone with WM5 test?)
If using EQ and other effects the CPU load increase.
A taskmanager with cpu load info can be found here (it's for PPC but works also ,somehow, on smartphones)
More CPU load = more power = less battery
2. The system lags while writing to storage card (big cards, > 1gb). This issue is present on WM5 Tornado roms too (except iphone rom wich seems to deal better with sd).
Need a beter SD driver .
Same when copying via ActiveSync (has anyone tried usbfn driver from HTC VOX?)
3. when TCPMP is playing audio it keeps the backlight alive
Using andot's PEE V6.
bsider said:
I have problems syncing my contacts if i have more than 305 contacts.
The ActiveSync (or WMDC) hangs saying "attention required". Though, i can make 305+ contacts on the WM6 and sync them back to Outlook! But backwards i get 305 contact limit. Vey, very strange!
With previous ROM everything was ok.
I tried syncing with different PCs, tried unistalling ActiveSync and WMDC - no use. Deleting pim.vol doesn't help too.
ActiveSync on WM6 gives me 0x8503001c error.
Click to expand...
Click to collapse
Hello,
I've got a similar problem to this. It used to work fine until last week. I can't remember changing anything in my Hard/software setup but now it just hangs and only some of the contacts sync.
I've searched in the forum but can't seem to find any other reference to this problem. If anyone knows a solution (or any discussion of it) please let me know. Basic device info below:
SPV m3100 (HTC TyTN) running WM6
Windows Vista Home Basic
Windows Mobile Device Center
Thanks.
I was wondering if anyone has got the Blackberry client working on a Treo 750v running WM6?
barneyrubble said:
I was wondering if anyone has got the Blackberry client working on a Treo 750v running WM6?
Click to expand...
Click to collapse
The BB connect don't work with WM6 actually...
from Palm : Do not Install this update if you are using Blackberry Connect (BBC). Palm Windows Mobile 6 does not support the BBC service...
this is a BB connect CAB...made by HTC
it's basically made for AT&T tilt (8925) = Kaiser
I guess it'll work with any WM6 pro device...
http://www.america.htc.com/connect/8925/
http://www.america.htc.com/mobile/co...e/default.html
installation CAB
http://www.america.htc.com/mobile/co...l/default.html
thanks to duke911
or download cab file to your pc:
http://download.america.htc.com/BBConnect_WM6_Professional_BB_4[1].0.0.84.cab
edit: thanks for the correction!
Corrected BB Connect URL...
http://download.america.htc.com/BBConnect_WM6_Professional_BB_4[1].0.0.84.cab
Tried this and it won't work for me.
Has anyone actually got this working on a Treo750?
It gets an IP for about a second but then it drops it.
Same here w/ 750c. Gets an IP address for a few seconds and drops to no connection. BTW I am using BBC 4.0.0.90, you can find it on sems.org. I wonder if anyone w/ the Voda or the Aussie ROM would give a shot to this BBC version to see if it makes any difference.
Thanks,
HC
I guess it's the same problem as elsewhere, where you need to change the machine type in window.nb (I think). Only problem is I can't find an easy explanation of how to do this.
I was trying BBC 4.0.0.90 with Voda ROM and no luck.
Strange thing today on my 750c - Got PIN
Hi all,
It seems that something is changing w/ either RIM or ATT. I installed again today BBC 4.0.0.90 onto my 750c w/ WM6 ATT leaked ROM, after the normal reboot, surprisingly, BBC service connected to the network and I got a PIN. Clearly it said "Connected" on the status tab. Well, I connected the device to my laptop and ran the BBC Desktop, the system was provisioned properly (I think ...), Notes Backend, but now it fails to connect to Blackberry, same symptoms as before, even after multiple soft resets, see comments above. I'll play around some more w/ it and let you all know if I get anything to work. In the mean while, if anyone else has any success, please share ....
Good luck
HC
I have WM 6.1 installed using BB Connect 4.0.0.97 and its a no go. Oddly enough, I tried the same thing on an earlier Vodaphone WM5 ROM and it still didn't work...any suggestions?
Btw, I get the same issues as above, I have a PIN listed (and IP address for a short time if I Suspend and Resume) but then when I attempt to input the PIN into my online BIS account and switch devices is says the information can't be verified.
I have been using the YouTube app since I got the phone and have been impressed. However when I used it today I notice that it is no longer producing preview pictures for the videos. To the left of the screen it used to generate a picture of the video, today however all I get is a dark grey box with a white TV symbol.
I have been playing around with the phone a lot, so thought it might have been something I'd done or installed, however I have done a hard reset and it is still happening.
Is this something to do with my phone or the YouTube service?
Anyone got any ideas?
I got the same problem. The first week it displayed the photo`s, but now ( the second week ) it wont display the pictures anymore...
my youtube just doesn't wok full stop. every time i start it, it just says '' there is no network connection right now, please try again later
any suggestions?
no connection? turn of proxyserver
I have the same problem with the preview pictures, so i guess the problem is on the youtube server side..
For the connection problem:
go to settings > connections > connections > "adjust my proxy server " or something like that. (mijn proxy server instellen in dutch)
Try turning off /removing the proxyserver there. (i had this problem with the preinstalled vodafone proxyserver. I removed it and everything works now)
i hope this works for you
Same for me, only worked for the first few days now I do not get the preview and I am not using a proxy server my connection is through wifi
I've tried reloading t-mobs settings and everytime i load youtube it still tells me that it has no network connection
i've tried having the phone using the automatic proxy setting and tried with it off (having it off is the only way that Msn will work as well, when i had it on, msn said there was no connection. so i guess it was something to do with that, however it wasn't)
should i try to reinstall youtube app? if so, where do i get the CAD?
ahhh soo annoying, really want to start hitting youtube when i have free time in class but no luck
This and the battery are the only faults i'm having with the TD2 (battery is still just as bad as the TD.
I carried out a hard reset and still found youtube previews not working.
me too ! no previews with Duttys HD 3.0 youtube player . I went back to youtube player v 1.6, without success, still no preview . Does anybody have the last version 2.5 wvga as a cab file to return back to the latest version, please ? Thank you.
hans
sorry, double post
Very strange!! it's started working again
Same here, it stopped working after a few days but just now I tried again & its working. Weird
Not so weird if it was something at Google's end that was the problem and they now fixed it. It's been reported on the HD forum to so not linked to the TD2.
Can confirm mine working too now.... thought it was something to do with T-mobile but was obviously 'booble'.
G
I have had no problems with the youtube app running at all. The thing with the pictue of the video not showing is due to it not fully loading. Bad reception I guess. Happened when I had like 2 bars.
I'm on T-mobile US so only have edge and it's worked pretty well. App works better than on my Elfin.
I also confirm it's back again today
Heya guys,
I have a project I wish to start with. I have a old HTC TyTn II and HTC Touch Pro II available, but thinking of using the HTC Touch Pro II as its the better phone.
I wish to make use of all the phone's functionality (GPS, BT, SMS, etc) to gather information to do certain tasks with them. I first wanted to pass everything down to a PC, but from what I heard about Android, I can prob use the phone as the computer and do everything from there.
I wish to install the phone into my car and program it as a security system. (Experimental)
Some of the things I am looking for the system to do are:
When the Car Phone detects my Real Phone, it should auto disarm, sending a command via Bluetooth to a relay to Disable Fuel Cutoff.
If the car moves (GPS) and wasn't disarmed, the phone should send out a text, notifying me of potential theft.
A web server could also be great with a corn job that will update a simple txt file with GPS co-ords, as to follow the car. Maybe use it as a remote interface later.
The script should respond to text messages or some network interface (Internet would be cool) so I can control it from a distance...
I believe this gives you an indication of the direction I wish to move in. I haven't played with Android source yet, but I know its Linux. What is the possibility of removing "Android" and keeping the drivers so that I can write my own custom script to just run in the background.
If there are better ways, please let me know. I'm still looking for possible options.
There is a Android version out for the HTC Touch Pro II that seems to work great! If recommended, I would prob try to start from it.
Thanks
Xethron
This mod is not developed / maintained anymore.
The mod is based on an (now) old version of the Pioneer AppRadio app that does not support the latest Android versions and head units.
If it works then it works but if not then you are on your own. There is no support. Also the ARUnchained GPS Injector app is not developed anymore.
To use AppRadio Unchained please get the paid version from the Play store called ''AppRadio Unchained Reloaded".
For details see here: AppRadio Unchained Reloaded
If you don't want to root your phone and have Android 7 or higher there's AppRadio Unchained Rootless
Old information:
=================================================================================================
The Pioneer AppRadio is a radio with a 7" touch screen. Android devices can be connected via HDMI and shown on the screen.
Touches and keypresses are sent back to the Android device via Bluetooth. The radio has a GPS receiver and data is sent
over Bluetooth as well. In essence a very nice concept.
To connect to an AppRadio there's a Pioneer AppRadio app available in the Play store. The Pioneer AppRadio app
is however quite restrictive. It allows only to run a small number of apps that are approved by Pioneer. These approved
apps can interact with the AppRadio app because they have a built in Pioneer SDK. The number of useful apps is small.
For details look here: Pioneer Appradio Knows website.
The goal of this project is to modify the Pioneer AppRadio app in such a way that it allows full mirroring.
This means that any app can be used and controlled using the touch screen and keys on the headunit.
Also any application can receive GPS data from the AppRadio.
Setup guides by RogerH
Pioneer AppRadio with Nexus 5
Setting up Pioneer AppRadio with Android Stick
Links
CNET article that gives a nice overview
Video from Steven Solazzo
Video from SinisterC6
Video from Neil Fontamillas
Video from M Sylvester showing AVH-4000NEX working
Video from M Sylvester showing AVH-8000NEX working
Video from M Sylvester showing Samsung Note 3 hardware setup
Video from Pascal H showing ARU in action in a Porsche 997 Turbo (in French)
Current status of the AppRadio Unchained Mod (free)
Beta release 6 is available for testing.
You can download it from here: arunchained0.16.apk
For Android HDMI sticks there's a special version available.
You can download it from here: arunchained0.15stick.apk
Current status of AppRadio Unchained Reloaded (has built in GPS Injector) (paid)
In addition to the AppRadio Unchained mod of the Pioneer AppRadio app, a completely Pioneer-less app was developed.
Basically it allows you to connect to your AppRadio in a faster and easier way without the need to use Tasker.
For details see here: AppRadio Unchained Reloaded
Current status of the ARUnchained GPS Injector (to be used with the AppRadio Unchained Mod) (paid)
GPS injection on system level using mock locations is available in the playstore here: ARUnchained GPS Injector
For GPS Injector details go to the FAQ here: ARU FAQ
Please fill out the survey here: ARUnchained GPS Injector survey
Navigation apps that already have AppRadio support like Waze and Navfree still work using the HU GPS. If you only use those apps then you don't need ARUnchained GPS Injector.
Head unit models that have built in navigation like AVIC-Z150BH, AVIC-F50BT and similar are not supported as Pioneer does not support sending of GPS data to the android device. If you are unsure, a test that can be done is to install Waze, if Waze can use the GPS of the head unit, ARUnchained GPS Injector works as well.
Release notes beta release 6
Rotation locker only active when HDMI connected.
ARU menu also available when not connected from Settings / Help menu.
Rotation locker and Start GPS Injector are now separate options.
Release notes beta release 5
Right part of the screen not reachable on Nexus 5 issue fixed.
Touch made more accurate for all phones.
Release notes beta release 4
Start / stop GPS Injector service when bt connected / disconnected.
SWC extended with ff & rw (to be tested by M.a.s.e-> doesn't work)
Play/Pause of HU quick menu bar now working.
Release notes pre-beta release 3
Steering wheel controls are working now.
For details go here: ARU FAQ
Release notes pre-beta release 2
Multitouch implemented.
Hardware keyboard issue fixed.
Options menu available.
Rotation locker.
Invert XY-coordinates. -> Does not work 100% yet.
Release notes pre-beta release 1
Radio buttons are working now.
Alternate method for setting uinput access rights fixed.
Release notes pre-beta release 0
Root access is required so your phone must be rooted.
For now it only allows using the touch screen.
Only single touch is supported.
Keys from the radio don't work yet.
GPS from the radio doesn't work yet.
Steering wheel controls don't work yet.
Users have reported it working on AppRadio 2, AppRadio 3, AVIC-F950, AVH-X8500BHS and AVH-X8550BT.
Disclaimer: Use at your own risk. Basically if it damages anything (you / your phone / your radio / your car or whatever),
don't blame me.
Donating
If you like my work and want to donate something, click on the "DONATE TO ME" button. However the first page will show in Dutch ( I guess because I am registered there).
Two solutions:
1) In another browser window logon to Paypal first. Then press the "DONATE TO ME" button here.
2) At "Donatiebedrag" enter the amount in US$ you want to donate, at "LOG IN OP PAYPAL" enter your logon details. After logon the language will change to your local language.
FAQ
For FAQ go here: ARU FAQ
Common issues and solutions
For an overview of common issues go here: Common issues and solutions compiled by stewbuntu
For help on what hardware to use you can also go here: Appradio forums It's basically the ARLiberator forum but has information about how to setup your hardware too.
Compatibility list
This app is compatible with any AppRadio that is supported by the original AppRadio app.
Details of supported Android devices:
Please fill out the survey here: ARUnchained survey
You can also report the issues that you have.
See attached ARUnchainedSurvey03.zip file for results of the survey. It's a zipped pdf file (had to zip it because of pdf size limitation on XDA). It gives a good overview of what phones/radios are working with ARU.
Old releases
Beta release 5 is still available in case 6 doesn't make you happy: arunchained0.15.apk
Beta release 4 is still available in case 5 doesn't make you happy: arunchained0.14.apk
Pre-beta release 3 is still available in case 4 doesn't make you happy: arunchained0.13.apk
Nice work! I can't wait to get home and test it out.
In the other thread I saw that someone had a S4 working with the AR3 using your app, so you have me really tempted to upgrade from the AR2 If you get GPS working on the AR3 you can definitely count on a donation from me.
FAQ
ARUnchained GPS Injector
The ARUnchained GPS Injector app has two parts inside. One is the GPS service and one is the UI activity.
The service is the part that injects the GPS data into mock locations. ARU 0.14 and up will start this service automatically when a bluetooth connection is made to the HU (at the same moment that the rotation locker is started). The GPS service is stopped when bluetooth is disconnected.
The UI activity is started when you start the ARUnchained GPS Injector app from the launcher. It shows the status of the GPS service and also the actual GPS data. The purpose is to be able to check whether the service is working properly. With the start / stop buttons the GPS service can manually be started / stopped.
For the GPS service to work Mock locations has to be enabled. To use the phone built in GPS, Mock locations has to be disabled. It can become tedious to set this manually so ARUnchained GPS Injector has an auto on/off Mock locations feature. In order for this to work ARUnchained GPS Injector has to be converted into a system app.
This involves moving "mars.area51.arunchainedgps.apk" from "/data/app" to "/system/app". This can be done with root explorer for instance. Set permission to rw-r--r-- and reboot your phone. On Android 4.4 (KitKat) you should move the apk to "/system/priv-app" folder instead.
For pre-KitKat Android versions converting to system app can be done using Titanium backup:
Open Titanium Backup
Search for ARUnchained GPS Injector
Long press and choose convert to system app
Reboot phone.
Converting to system app using free ES File Explorer
1. Make sure in ES File Explorer, Root Explorer is enabled and Mount R/W is on RW
2. Copy pkg.apk in /mnt/asec/mars.area51.arunchainedgps-1 to SDCard and rename it 'mars.area51.arunchainedgps-1.apk'
3. Install 'mars.area51.arunchainedgps-1.apk' from SDCard
4. Move 'mars.area51.arunchainedgps-1.apk' from 'data/app' to /system/app or /system/priv-app on 4.4.x
5. In /system/app or /system/priv-app select 'mars.area51.arunchainedgps-1.apk' and in menu select Install.
6. After install reboot
How to make a logcat using an app called Catlog
Start Catlog logcat through app menu and select record.
Select home button so you leave Catlog app running.
Go through process to start ARU and connect to AR.
Once you know the bug was created, open the Catlog app from notification bar (this stops recording).
Select the recording, which is named by date-timestamp...from action selection pick share by email...this zips the logcat and system info txt files into one zip.
Email to self and share the zip with dev by email or any other method you want.
On my Samsung phone not the whole screen is shown but a part is cut off
A) The default Samsung launcher doesn't handle landscape well. The solution is to install an alternative like Nova launcher.
On my Samsung phone touch stops working after calibration
A) Verify your phone is rooted properly.
B) On Android version 4.3 and higher Samsung has Knox security and SELinux is in enforcing mode.
This somehow prohibits accessing the /dev/uinput device which is required to be able to input touch/key events on system level.
In order for ARU to work Knox has to be disbled and SELinux has to be in permissive mode.
Possible fix 1:
First install an app called Android Terminal Emulator then open a terminal and type
the following lines pressing enter after each line:
su
pm disable com.sec.knox.seandroid
Now wait a bit till knox is killed and finally type:
setenforce 0
If this works, you have to do it every time you reboot your phone. It can be automated with Tasker for instance
Possible Fix 2:
Install the Xposed framework and the Wanam module.
At Security hacks tick " Disable Knox notifications" and "Disable SEandroid".
Reboot.
Possible Fix 3:
If the other fixes don't work and your bootloader isn't locked you can try to install a custom kernel that has Knox disabled and SELinux in permissive mode by default.
Keyboard use
It's not necessary to install Car Keyboard. Only the original Pioneer AppRadio app needs that.
Note that the virtual keyboard created by ARU is sometimes incorrectly detected as a hardware keyboard.
This prevents the software keyboard to be shown and makes it impossible to enter anything.
To check / set the keyboard settings:
Click the menu button on ARU.
At the right bottom click on "Change input method"
A pop-up is shown that CarKeyBoard has to be installed. Ignore it by clicking OK.
The dialog for selecting the input method is shown.
Make sure hardware keyboard is switched off.
Use of the hardware buttons:
The home, menu and back button now work as advertised.
To go back to the native interface you have to open the AppRadio app manually and then press the home button.
To go to the AppRadio app easily, swipe down the status bar and click the AppRadio notification.
Fast option to go back to the native interface: Double click the home button, touch the blue bar in the middle with 4 squares on the left.
Release notes pre-beta release 2
Multitouch implemented.
Multitouch works now. AppRadio 3 has a bug which makes it a bit unpredictable.
Hardware keyboard issue fixed.
Sometimes the virtual keyboard created by ARU was incorrectly detected as a
hardware keyboard preventing the software keyboard to be shown. Fixed now.
Options menu available.
The options menu can be reached from the app's main screen. There's now an additional ARU
option sub menu available with two options:
Rotation locker.
Invert XY coordinates.
When in AppRadio Mode homescreen, select menu button, select ARU, there you will see the ARU feature options...only accessible when connected to HU at this time.
Options can be set but will only become active after force stopping the app and then restarting it.
Go to Settings->Apps->AppRadio Unchained and do a Force stop. After that just start ARU again
and the options will take effect.
Rotation locker.
Forces rotation to be in landscape when enabled.
Locker becomes active when a bluetooth connection is established with the radio.
Locker is deactivated when bluetooth is disconnected.
Invert XY-coordinates.
Necessary for some tablets and HDMI sticks.
Currently this options doesn't work well. Somehow it will switch mode during calibration, giving
incorrect calibration results. After that touches are at the wrong position meaning app is useless.
Will look into it soon.
Release notes pre-beta release 3
Steering wheel controls
Steering wheel controls are working now.
Currently supported are: previous track and next track.
There might be more but I couldn't get it out of my radio.
Of course there's volume, mute etc. but that is handled directly by the radio
and never sent to the phone.
In case there are commands sent by the radio to the phone besides the ones already implemented the logcat will contain this:
Don't know how to translate RemoteCtrlInfo = <number>. Let me know the number and what remote control command you were
issuing and I can add it.
Hell yeah man! Thank you! will test soon on my AR3. If you have that bitcoin address set up I'll send you like $20 worth of btc for this mod.
great... waiting so long for getting AR3 support...
will test it today and donate as well...
Gesendet von meinem Nexus 7 mit Tapatalk 4
Original Hack Bounty Crew:
--------------------------------------------------------------------------------------------
$200 lpasq (xda) Confirmation number: 7D019513V95549722
$100 drawblood (appradioforum & xda) Donation made per post on AppradioForum
$50 ofarrell.g1 (xda)
$50 evillela2001 (xda) Confirmation number: 3NF91232VR227492L
$50 Meldoon (xda)
$25 rs2k (xda) Confirmation number: 8R358541KC016842T
$25 jj69chev (xda)
$25 leobg (xda) Confirmation number: 8TE693651C300254U
$25 tnuts22 (xda) Paid
--------------------------------------------------------------------------------------------
$550 Committed - U.S. Dollars
($425) Confirmed Donated
==============================================
$125 Due
hey Area51. i have a bugreport for u. appradio app from market work ok on lg p999 with stock 2.3.4 fw, but modified app crash twice at startup. then it work seems fine(cant test it with pioneer now). on same phone with cm7(2.3.7) and cm10 all ok. i have a log dump for u: http://pastebin.ca/2455597
Alright just got done testing with my note 1 I717 running stock 4.1.2. Couldn't get it to work at all. Bluetooth is connected as I can stream google play and make phone calls through the unit. However, when I connect the MHL adapter to the deck, I get an icon that I can only describe as a map with a speech bubble with a bluetooth symbol in it with an x by it. I'm assuming it means no bluetooth connection. However streaming music via bluetooth is currently going on. Now on the phone side, normally in the non modified version of ar before the mhl adapter is plugged in and bluetooth is connected, it gives a picture of a usb cable on the phone with an arrow saying plug in. On the arunchained, it just gives the Bluetooth symbol with 6 dots like it's not connected. I'm terrible at bug reports so if you have any questions I'll try to answer it.
Your phone has to be rooted for this app to work
tmp_do said:
hey Area51. i have a bugreport for u. appradio app from market work ok on lg p999 with stock 2.3.4 fw, but modified app crash twice at startup. then it work seems fine(cant test it with pioneer now). on same phone with cm7(2.3.7) and cm10 all ok. i have a log dump for u: http://pastebin.ca/2455597
Click to expand...
Click to collapse
I think it may be due to code obfuscation stripping a bit too much code. Thanks for the report.
Droid Bionic
I donated 50usd...even without the AR2 hardware buttons working, this app is awsome. I use an old rootrd stock Droid Bionic, and your app works perfect for me. No lag, no parts of the screen I can't get to, just works perfect. Thanks for all the hard work, buy some drinks on me.
gbual said:
Your phone has to be rooted for this app to work
Click to expand...
Click to collapse
It is rooted.
jdbaldi said:
I donated 50usd...even without the AR2 hardware buttons working, this app is awsome. I use an old rootrd stock Droid Bionic, and your app works perfect for me. No lag, no parts of the screen I can't get to, just works perfect. Thanks for all the hard work, buy some drinks on me.
Click to expand...
Click to collapse
Don't pay me too early, the app is not even finished. I might take the money and run......
J/k, I will finish everything.
And I have to add, thanks a lot for the donation!
Area51© said:
Compatability list
To be done.
Click to expand...
Click to collapse
Try this https://docs.google.com/forms/d/1sz8ItL_d4NlLWP33-JK1aaxv8-LWZGuKPjr1RuMNlBI/edit?usp=sharing
Area51...paste link to OP if it works for you.
enjoimadcow said:
Alright just got done testing with my note 1 I717 running stock 4.1.2. Couldn't get it to work at all. Bluetooth is connected as I can stream google play and make phone calls through the unit. However, when I connect the MHL adapter to the deck, I get an icon that I can only describe as a map with a speech bubble with a bluetooth symbol in it with an x by it. I'm assuming it means no bluetooth connection. However streaming music via bluetooth is currently going on. Now on the phone side, normally in the non modified version of ar before the mhl adapter is plugged in and bluetooth is connected, it gives a picture of a usb cable on the phone with an arrow saying plug in. On the arunchained, it just gives the Bluetooth symbol with 6 dots like it's not connected. I'm terrible at bug reports so if you have any questions I'll try to answer it.
Click to expand...
Click to collapse
Hmmm, basically that part (Bluetooth communication etc.) is not changed from the original app. So I don't really understand why there is a difference. It seems you are using an AR3 but I have an AR2, so I guess icons on the headunit are different.
On my phone side I get a Bluetooth symbol with 6 dots as well, and it's working.
Area51© said:
Hmmm, basically that part (Bluetooth communication etc.) is not changed from the original app. So I don't really understand why there is a difference. It seems you are using an AR3 but I have an AR2, so I guess icons on the headunit are different.
On my phone side I get a Bluetooth symbol with 6 dots as well, and it's working.
Click to expand...
Click to collapse
hmmmm. I uninstalled the app, restarted the phone, reinstalled, gave root access, and still nothing =(. I made an album of screenshots and pics http://imgur.com/R7sU3gf,vBVOGAN,VAiII0J,U5NEyBC#3 . When I go to the center icon it gives me a message like app radio does not seem to be installed, when I hit ignore, I see the home screen of android, but I get that hand with the x when I try to do anything.
enjoimadcow said:
hmmmm. I uninstalled the app, restarted the phone, reinstalled, gave root access, and still nothing =(. I made an album of screenshots and pics http://imgur.com/R7sU3gf,vBVOGAN,VAiII0J,U5NEyBC#3 . When I go to the center icon it gives me a message like app radio does not seem to be installed, when I hit ignore, I see the home screen of android, but I get that hand with the x when I try to do anything.
Click to expand...
Click to collapse
Phone side is same as I get. AppRadio side I can't compare I have an AR2.
On the phone side I only get that Bluetooth icon with the 6 dots. I think the other is because you have Bluetooth streaming.
lpasq said:
Try this https://docs.google.com/forms/d/1sz8ItL_d4NlLWP33-JK1aaxv8-LWZGuKPjr1RuMNlBI/edit?usp=sharing
Area51...paste link to OP if it works for you.
Click to expand...
Click to collapse
Thanks.
This link got me into the design mode somehow. Do you have to give everybody access before they can enter data?
Maybe a field to state working or not working and if not, why not would be nice.
Will look at it later, my gf wants me to watch the last episode of Dexter now.
lpasq said:
Try this https://docs.google.com/forms/d/1sz8ItL_d4NlLWP33-JK1aaxv8-LWZGuKPjr1RuMNlBI/edit?usp=sharing
Area51...paste link to OP if it works for you.
Click to expand...
Click to collapse
I tried it again but now I got a message that the file is in the owners bin. When I clicked the link, I entered into design mode or something. I had to click "View live form" to enter data. But it seems someone else entered data in design mode and replaced all the titles with the answers he wanted to give. Do you have a copy? Maybe need another link to go to the View live form mode right away.
enjoimadcow said:
hmmmm. I uninstalled the app, restarted the phone, reinstalled, gave root access, and still nothing =(. I made an album of screenshots and pics http://imgur.com/R7sU3gf,vBVOGAN,VAiII0J,U5NEyBC#3 . When I go to the center icon it gives me a message like app radio does not seem to be installed, when I hit ignore, I see the home screen of android, but I get that hand with the x when I try to do anything.
Click to expand...
Click to collapse
Have you paired the radio to the phone under Bluetooth settings? Also - check if phone is "selected' on the connection tab on the radio itself (I recommend auto connection to be set to ON)