The signature shown is incorrect. That was the earlier ROM giving me problems...
Hi Everyone,
I have been writing on this same topic over and over again. Following is my problem:
I bought HTC Prophet/O2 Neo and it works well with Windows Mobile 5. I wanted to upgrade to Windows Mobile 6 and other higher versions. I can upgrade to WM 6 as well.
But following are the problems I face with WM6 and higher versions:
1) When I send a short message (SMS) to someone my phone works normally but if someone calls me the phone rings at their end but does not ring at my end. I switch off the phone (put it on standby) and then it works okay.
2) IF the phone loses the signal anywhere it just keeps on hunting for the signal. In the meantime it shows the green light blinking indicating it does have a signal. Now if in the meantime any one calls me up the phone again rings at their end but I do not get any incoming calls. I do not get any missed call alerts either.
I have reverted back to Jester's ROM in WM5.0 it is working fine again with the following problems:
1) The voice quality is not so great and calls regularly get dropped in areas where signal is not too strong
2) The contacts do not have options such as "File As"
3) When you want to dial and you put in the first few numbers for e.g. for dialling SAM you put in 726 it will display all entries related to 726. Though SAM is a part of these entries it should be the first entry as it is someone I call more often.
4) When you are playing music and put the phone on standby the music stops!
I request you to advise me on how should I upgrade to 6.0 or further in the best possible way or help me resolve the problems in WM5 with appropriate apps
Also one thing I wonder is what IPL/SPL/GSM should be there ideally for WM6.
Also FYI my friend has the same phone upgraded to WM 6.5 and it works perfectly for him. I put my SIM card in his phone and it worked fine as well.
Please help.
Regards,
Vinit Badani.
Hi Everyone,
I have been writing on this same topic over and over again. Following is my problem:
I bought HTC Prophet/O2 Neo and it works well with Windows Mobile 5. I wanted to upgrade to Windows Mobile 6 and other higher versions. I can upgrade to WM 6 as well.
But following are the problems I face with WM6 and higher versions:
1) When I send a short message (SMS) to someone my phone works normally but if someone calls me the phone rings at their end but does not ring at my end. I switch off the phone (put it on standby) and then it works okay.
-this might have to do with correct settings did you check your phone settings or if not did you hard reset after flashing a ROM whether is WM 5 or 6?
2) IF the phone loses the signal anywhere it just keeps on hunting for the signal. In the meantime it shows the green light blinking indicating it does have a signal. Now if in the meantime any one calls me up the phone again rings at their end but I do not get any incoming calls. I do not get any missed call alerts either.
-this doesnt happen to me maybe there is really a network problem or better yet check your phone settings again there might have been an appropriate setting for this situation
I have reverted back to Jester's ROM in WM5.0 it is working fine again with the following problems:
1) The voice quality is not so great and calls regularly get dropped in areas where signal is not too strong -that happens really if signal is not so strong better find a spot where in there is an appropriate signal
2) The contacts do not have options such as "File As" -this is ROM dependent i think... some ROM cookers incorporate these settings in their ROMS
3) When you want to dial and you put in the first few numbers for e.g. for dialling SAM you put in 726 it will display all entries related to 726. Though SAM is a part of these entries it should be the first entry as it is someone I call more often. -you have to live with it i guess since your using WM 5
4) When you are playing music and put the phone on standby the music stops!check your media player settings there is a setting that says play music even on standby mode
I request you to advise me on how should I upgrade to 6.0 or further in the best possible way or help me resolve the problems in WM5 with appropriate apps
Also one thing I wonder is what IPL/SPL/GSM should be there ideally for WM6.nope IPL doesnt matter SPL should be HardSPLed if your G3 you should have 2.G3.4PDA or G4 2.G4.4PDA (read more on how you will know if your device is G3 or G4 on Prophet WIKI THIS IS IMPORTANT BEFORE FLASHING ANY ROM GSM its only for getting phone signals etc etc and sometimes this matter when your battery drains so fast
Also FYI my friend has the same phone upgraded to WM 6.5 and it works perfectly for him. I put my SIM card in his phone and it worked fine as well.
Please help.
Regards,
Vinit Badani.
i am aware that my phone is a G4
Upgrade to 6.5 and Driver software in english
Dear Sir,
I have this Prophet mobile with Windows 5.0. My laptop has a windows Vista operating system.
I Need help to upgrade this system to WIndows 6.0/6.1 and also I request yo to guide me how to install this version in existing Phone.
Also I am facing a connection problem with my service provider Airtel. He says they donot have this phone in their list. They are unable to suggest manual settings.
Kindly reply me at [email protected]
Best regards
Dr. Suryakant Gupta
guptasuryakant said:
Dear Sir,
I have this Prophet mobile with Windows 5.0. My laptop has a windows Vista operating system.
I Need help to upgrade this system to WIndows 6.0/6.1 and also I request yo to guide me how to install this version in existing Phone.
Also I am facing a connection problem with my service provider Airtel. He says they donot have this phone in their list. They are unable to suggest manual settings.
Kindly reply me at [email protected]
Best regards
Dr. Suryakant Gupta
Click to expand...
Click to collapse
Dr. Gupta,
theres a wide range of infos regarding prophet upgrading on these pages
WIKI: http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
Useful Link: http://forum.xda-developers.com/showthread.php?t=350033
and also if your laptop has Vista platform and wishes to upgrade still here are good links too
http://forum.xda-developers.com/showthread.php?t=485293
http://forum.xda-developers.com/showthread.php?t=534707
feel free to ask if there will still be questions..
if you can also provide here your:
Phone Model:____________
IPL:____________________
SPL:____________________
Regards
Related
Hi all,
Would appreciate help and comments on the following issues I have with my new XDA IIs. Have always been a Palm user but some issues that I face looks more than just software issues.
1. Reception - When my phone comes out from an area without phone reception, it does not get back connection until someone calls or sms. So no outgoing calls possible until someone calls me or sms me. It's a major pain in the neck.
2. Bluetooth - does not work with my Motorolla headset which worked brlilliantly with Nokia and Sony Ericsson. I can hear the other party but they hear everything else loud except my voice soft.
3. Hangs a lot or rather, sluggish at times
4. Does not cut off calls even when end call button on the handsfree set is pressed.
Can anyone help???
In my opinion why don't you Upgrade your ROM, there's lots of articles in this forum how to upgrade your handset.. "Search" Follow the instructions and I assume your device will work properly once for all
Get the latest v1.31 ROM update from O2 service center
As far as the hangs go, I would clean out every unnecessary thing that's in the \Windows\Startup folder. This is stuff that is automatically started up on a soft reset. Stuff like the "aPerSave..." file links for example should be moved somewhere else for safe keeping. I have a PDA2K, so I don't know if you have the same files as I do, but I imagine they are pretty siilar. The Pocket PC OS is limited to 32 running processes and out of the box the PDA2K is running close to that number already. I imagine the IIs is configured similarly. Starting more than 32 processes can cause others to shut down prematurely, causing hangs. So, getting rid of the unnecessary processes leaves more free for apps later on as you are using the device.
I had many unexplained hangups on my PDA2K until I cleaned out that Startup folder. Once I did that, the hangs vanished.
Answer to Question 4:
Unfortunately the button is not supposed to hang up. (I think it puts it in Mute mode?)
Hi,
I bought the Excalibur and the Vox 'cause I though it would have been great being able to place VOIP calls from my phone, using the same setup I use with my ATA.
The files to enable VOIP and MS phones have been circulating since a while, but even though I tried couple of packages I still have some issues.
The problem I have is that, for some strange reason, when the VOIP cab is installed my phone sometimes loses "Calling and receiving" capability.
Sometimes I trie to place a phone call and the phone hangs, I can only switch it off and on again. Sometimes I even have to remove the SD card otherwise it will keep doing a Reboot Loop.
Other times I receive an SMS for a missed call, as if I had been offline. When I then try to call back my phone hangs.
This bug seems to affect only the Calls and not the SMS functionality.
Has anybody experienced the same issue?
Thanks,
Ka.
I also have the same problems except for the SD rebooting.
I installed the VOIP client from the workarround posted here and I also experience the same problems:
1) phone seems to work fine until I decide to place a call, when I finish entering the numbers and I hit the Call button, the phone does nothing (not even the beep) and from that point I know that I can't place calls (dial pad doesn't even works on home screen). I have to reboot.
2) I receive SMS from missed incoming calls. If I call my S710 from another phone I get a calling tone and then the answering service, but the S710 does nothing.
I had email accounts configured and I thought this problem was from GPRS not letting GSM calls come in (as it says in other threads) but now I have no active email accounts, no GPRS traffic and it is ever worst (3 to 4 reboots a day!)
I honestly don't remember this problem before VOIP client installed.
Anyone has this simptoms???
I do have the same probs
Probably others aren't experiencing the same because they disable the VOIP when no Wifi is available. I'll try to reinstall the VOIP Cab and try that way.
Bought the S710 for it's VOIP cababilities and possibility to hook it to my PBX and finally feel the freedom of VOIP (Ok, bit exagerating but you get my point ).
Anyway, since we're two at the moment, promised to keep you posted.
Thanks for your help.
Ka.
kast did you improve your VoIP configuration tool? I once tried it, but it never worked. I gave you feedback in another thread but never heard of you
same probs too
jockyw2001 said:
kast did you improve your VoIP configuration tool? I once tried it, but it never worked. I gave you feedback in another thread but never heard of you
Click to expand...
Click to collapse
Hi there,
sorry for taking so much time. Actually been quite busy lately and well, ok, must admin left this VOIP thing a bit aside.
Anyway, would you mind trying this version, hope it will work a bit better.
Tested with the provider you sent me and it seems to work.
(This is not a Cab Install thing, been packed up in couple of minutes, please unzip it and run it from your mobile.)
I think I'll get back to this so stay tuned for some little enhancements.
Ka.
COOOL.....Works on my modded Tornado with wm06...great!!!!Thanks!!!!
Hello Kast,
After my last post, I unistalled the VOIP software from within the phone's start>Settings>Remove Programs>Sleuth's WM6VoIP
I got this message "Sleuth's WM6VoIP was not completly removed. Do you want to remove it from the list of installed programs?", I didn't remove it.
I then changed the Settings>phone>Internet Calling>"Use Internet Calling" to "Never".
Since then I haven't experienced any troubles at all and I haven't rebooted the phone for some days now! problem solved but no VoIP!
I'll try your VoIP files and see what happends.
Cheers
P.S. My setting for VoIP was "whenever available" but i had WiFi off 99% of the day. (some days even 100%).
hilo,
Just created a new thread for this as its issues are pilling up the other one. i think that thread should be clean and should have only and only contain info about progress on the wm6 rom...
Mods if unnecessary please delete...
Tejas
I would not call it a bug but one of the disadvantages of the ROM is that, similar to these ones which come to Qtek and i-mate, it does not recognise the network settings out of the box but you have to fiddle with them manually. When I use Orange ROMs (and it does not matter if the ROM comes from the UK or Switzerland) everything works with flying colours, despite I do not use any Orange network. Just I have to install Opera Mobile (I hate pocket IE) and voila! Everything works!
Channels don't work.
in india AFAIK channels just provide the cell id i.e the area which i m in... not imp though... no use of channels
ok phil.
if u remove windows update, at least supply it as a cab in the extras folder.
channels don't work.
long pressed side button does not work! it used to start voice note record for the sda and i'd like that to work.
mms.
better camera software. btw htc camera makes the phone SLOW..... not a good one. need an alternate
enable profile switching to silent when long pressing '#' key
default folder for saving pictures on storage card is not my documents\my pictures any more but a lame dcim folder. that would be nice to be changed.
also, sometimes when answering a call, the keyboard stays locked, the call is still on, but the home screen is active and not the call screen.
joystick seems much better but sometimes it doesn't want to work as it should. maybe another driver; if not, this one is good
we need wpa2 for wifi enabled.
also add in the extras folder:
moblue
tcpmp with extra codecs
htc audio manager could be good
if u need the cabs for moblue and htc audio, i have them
there is an newer version of sim manager. v6.10. has a couple of new things (got it if u need it)
and maybe add a good version of opera. not the java one.
we also need a good midlet manager
also a good instant messaging program. maybe a multi client one like oz mobile im, or like im+
mmmhhh after read all this bugs, i better wait a while to update my phone, i find a good idea to write here all the problems with the actually ROM.
Good AD2P drivers
Hi,
Is it possible to have good ad2p drivers with the next rom?
Tomtom 6
I have never been able to run tomtom 6 before the update.
Is it possible now with update? and also which is best version to install?
Kindest regards
I have Push mail configured and GPRS seems to be buggy. once or twice a day GPRS seems to stop working. My Activesync fails with (Can not connect to network or waiting for the network to be available), and in that mode even IE can not connect to any site. I switch off and on the phone function only, GPRS becomes available again.
boneym said:
I have Push mail configured and GPRS seems to be buggy. once or twice a day GPRS seems to stop working. My Activesync fails with (Can not connect to network or waiting for the network to be available), and in that mode even IE can not connect to any site. I switch off and on the phone function only, GPRS becomes available again.
Click to expand...
Click to collapse
Actually I would split your post in two separate ones.
1. the instability of WM6 Alpha - obvious thing, and it should be fixed
2. but I also see something else. I see from many posts that one application which sets all the settings with one click is quite urgently needed. I know that something like that exists for Swiss networks http://www.mysmartphone.ch/Freeware/kommunikation/16920.aspx and for the Norwegian ones http://www.smartmobil.no/Article617.phtml but I think that everybody would agree that such an universal solution would be something good. Unfortunately, I do not know anything about programming but I can imagine this kind of program and a separate database. The database would be filled by volunteers - I can, for example, provide all the settings of Polish operators, someone else British, French, etc. It would be good esp. for people who travel a lot.
unlocksmith said:
I have never been able to run tomtom 6 before the update.
Is it possible now with update? and also which is best version to install?
Kindest regards
Click to expand...
Click to collapse
TomTom 6 is made for Pocket PCs. It requires a touch screen to work, so you won´t be able to control it. I have had it running on my 8310 but it´s just silly to even have it installed. Go for 5.2 if you can find it.
I have problems syncing my contacts if i have more than 305 contacts.
The ActiveSync (or WMDC) hangs saying "attention required". Though, i can make 305+ contacts on the WM6 and sync them back to Outlook! But backwards i get 305 contact limit. Vey, very strange!
With previous ROM everything was ok.
I tried syncing with different PCs, tried unistalling ActiveSync and WMDC - no use. Deleting pim.vol doesn't help too.
ActiveSync on WM6 gives me 0x8503001c error.
Thanks for your help. I got my old one to work. I really like the colours in tomtom 6 tho.
Also on my phone i have a problem(s) with tomtom 5, I cant type in the post code B8 followed by anything like B8 3NU. Also I can't use certain Points Of Interest such as hospitals or cash dispensers. These work fine on my Wizard but I wana be able to do it all with TORNADO!
The software of dual sim selector don't works with that new rom (adapter of 10ª generation).
Well, I don't know if it works; the soft does not appear by any side.
I proved several solutions, but no it has worked to me.
Somebody can help me?
Thanks.
tejasphatak please rename the topic to "WM6 Torando bugs/issues" , so we can generally post bugs/issues regarding all WM6 tornado roms
Bugs:
1. The locklevel change to 1 randomly..
2. Sometimes the phone freeze when unloking kepyad.
It happened two times.
Issues:
1. When playing audio the CPU load is ~ 25-30% (@180 Mhz). It is normal ? (can someone with WM5 test?)
If using EQ and other effects the CPU load increase.
A taskmanager with cpu load info can be found here (it's for PPC but works also ,somehow, on smartphones)
More CPU load = more power = less battery
2. The system lags while writing to storage card (big cards, > 1gb). This issue is present on WM5 Tornado roms too (except iphone rom wich seems to deal better with sd).
Need a beter SD driver .
Same when copying via ActiveSync (has anyone tried usbfn driver from HTC VOX?)
3. when TCPMP is playing audio it keeps the backlight alive
Using andot's PEE V6.
bsider said:
I have problems syncing my contacts if i have more than 305 contacts.
The ActiveSync (or WMDC) hangs saying "attention required". Though, i can make 305+ contacts on the WM6 and sync them back to Outlook! But backwards i get 305 contact limit. Vey, very strange!
With previous ROM everything was ok.
I tried syncing with different PCs, tried unistalling ActiveSync and WMDC - no use. Deleting pim.vol doesn't help too.
ActiveSync on WM6 gives me 0x8503001c error.
Click to expand...
Click to collapse
Hello,
I've got a similar problem to this. It used to work fine until last week. I can't remember changing anything in my Hard/software setup but now it just hangs and only some of the contacts sync.
I've searched in the forum but can't seem to find any other reference to this problem. If anyone knows a solution (or any discussion of it) please let me know. Basic device info below:
SPV m3100 (HTC TyTN) running WM6
Windows Vista Home Basic
Windows Mobile Device Center
Thanks.
Hello,guys
I meet some problems with my new ppc,ATOM LIFE
when i using ppc,i found i can't hang up and answer the phone.
i try to change new one sim card,but the problem also have.
i can send message but i cannt make a call
who can help me...thank you
I'm using WINDOWS MOBILE 6.0
i had similar problems in the very begining so luckily as i had no 3rd party s/w installed on it i had nothing to loose so i had reflashed my ppc with the official o2 wm6 ROM (also check the site o2service.c*m as there was an earlier version of the wm6 rom too which was upgraded there)
but now my ppc didn have those problems though a few hangups occur occasionally but then i'm able to pin point them to some new s/w i instal...!
hope this helps
TC
hi all!
ever since i got my vox ive been experiencing problems like this.
it only happens sometime and its difficult to reproduce. but problem is as follow..
people send me sms's (sometimes quite alot) and on their phone it just say pending. then if they phone me or just give me a miss call i recieve all the smses at once. but sometimes even when they try to phone me it goes to voice mail. my phone always have full signal during all of this. most of the time im experiencing this problem is when im using my phone as a gprs modem for my pc. i need to know if i should take the phone back or what? but how can i proof ive got this problem? i even updated phone to latest radio and still got problem. any help or suggestions pse!
I am not sure but I think the sms thing happens with my device also, but I have no idea how that could be possible.
?
What Radio versions do you have? If older upgrade to 4.1.13.54_03.10.90
I was on version 4.1.13.54_03.10.90 for some time
but i found the earlier version to be more stable.
just a personal experience.
but i guess i'll give 4.1.13.54_03.10.90 a second shot.
frauhottelmann said:
What Radio versions do you have? If older upgrade to 4.1.13.54_03.10.90
Click to expand...
Click to collapse
thanx i found ur link on another thread some time ago and i upgraded my radio. but its been 2weeks now and no improvement. my previous radio was something like x.x.34_xx.xx.xx or so. but yes, i do however think that i get better signal. cos on old radio when phone was on my desk it was 90% signal acording to the signal icon on home screen. now its 100. another thing about vox is when u type with qwerty ur hand blocks the antenna weakning the signal. kinda stupid as in most phone manuals they say u shouldnt put ur hand over the antenna area while in call or sms. haha!
but pse any ideas r welcome! im gonna use my sim in another phone for a bit to see if problem is with my sim or phone
Damn.
I have the same problem, most boring one.
Time after time, the phone stops receiving phone calls (line busy if you are calling me, I cant call because the green button doesn't do anything if i press it after I type the number or choose the contact) and some other times SMS messages. I keep the Vox close to my speakers and they make the sound like when you are receiving call/sms (can't describe it, but i think you get me) but nothing happens. And after 2 hours people call me and complain why I didn't reply to their SMS...
If someone finds what is the problem and solution to it I will be thankfull to him/her untill my Vox is alive.
Many options with new ROMs are great thing. But if the SP doesn't do it primary duty (make & receive calls and SMS messages) it's worthless.
I have it tested with 3 ROMs and the problem apeared with every one and each of them.
The default one, don't know the version. The radio was earlier version than 4.1.13.54_03.10.90.
Then I tryed 6.1 v1.0a of Dr. Gonzo.
And now I have for 3 days the 6.1 v1.1. At least once I noticed that problem with this, latest, version.
ljesh said:
Damn.
I have the same problem, most boring one.
Time after time, the phone stops receiving phone calls (line busy if you are calling me, I cant call because the green button doesn't do anything if i press it after I type the number or choose the contact) and some other times SMS messages. I keep the Vox close to my speakers and they make the sound like when you are receiving call/sms (can't describe it, but i think you get me) but nothing happens. And after 2 hours people call me and complain why I didn't reply to their SMS...
If someone finds what is the problem and solution to it I will be thankfull to him/her untill my Vox is alive.
Many options with new ROMs are great thing. But if the SP doesn't do it primary duty (make & receive calls and SMS messages) it's worthless.
I have it tested with 3 ROMs and the problem apeared with every one and each of them.
The default one, don't know the version. The radio was earlier version than 4.1.13.54_03.10.90.
Then I tryed 6.1 v1.0a of Dr. Gonzo.
And now I have for 3 days the 6.1 v1.1. At least once I noticed that problem with this, latest, version.
Click to expand...
Click to collapse
i dont think u got exactly the same problem. cos whenever im not receiving sms or calls for a while then when i make a call or send a sms all my msgs deliver to me at one time. so what im trying to say is that i am indeed able 2 make calls all the time. i think ur problem mite b caused by a 3rd party app on ur phone? btw i had my problem with original rom, guava rom, 6.1a and im downloading 6.1 v1.1 now. but i can tell u its gonna b the same. its not a rom based issue.
Hello
I've this probleme too,
Exemple : I power on the phone at 9h00, that all, and at 11h00 i would like to call a friend, phonebook-->frient-->call mobile and i press the green button it doesn't do anything. Impossible to call someone
I press the voicemail button : no result.
I must reboot.
Exemple 2 : I do anything my friend call me, my phone is power on, good reception, -->He have voicemail !!
I must reboot..
An idea?
padbol2000 said:
Hello
I've this probleme too,
Exemple : I power on the phone at 9h00, that all, and at 11h00 i would like to call a friend, phonebook-->frient-->call mobile and i press the green button it doesn't do anything. Impossible to call someone
I press the voicemail button : no result.
I must reboot.
Exemple 2 : I do anything my friend call me, my phone is power on, good reception, -->He have voicemail !!
I must reboot..
An idea?
Click to expand...
Click to collapse
what radio version and rom are u using? any 3rd party apps that mite interfere with ur call button etc?
PLEASE people lets all give our radio version and rom versions etc so we can pinpoint this problem. it seems that quite a few people are actually experiencing this problem and they dont even realise it.
it does seem that the vox gets in a type of a bottleneck with sms and calls. all ur smses gets jammed and then as soon as i send a sms it blasts open the jam and lets my sms's thru. no point in talking to service provider customer care as they are all idiots
primitive.A said:
what radio version and rom are u using? any 3rd party apps that mite interfere with ur call button etc?
PLEASE people lets all give our radio version and rom versions etc so we can pinpoint this problem. it seems that quite a few people are actually experiencing this problem and they dont even realise it.
it does seem that the vox gets in a type of a bottleneck with sms and calls. all ur smses gets jammed and then as soon as i send a sms it blasts open the jam and lets my sms's thru. no point in talking to service provider customer care as they are all idiots
Click to expand...
Click to collapse
My radio version is : 4.1.13.54_03.10.90
My rom version is Wm6.1 v1.1 : 5.2.19195 (build 19202.1.0.0)
I have just R66mobile7, but i don't think it interfere with my call button
Same problem for me even with the last version of the radio...
I had the same problem with the original rom after installing native voip but no problem with hard reboot without installing native voip on the original rom.
On this morning, I made a hard reboot and didn't install my voip settings only to see...
I will let u know if there are some changes...
I have some problem. Hard reset one day ago .. and till now everything work well.
Did you install your voip settings when you encoutered the problems ?
no route 66 wont interfere. i was thinking more along the lines of smart toolkit etc. it does seem like u got same problem. im read on another thread that the arabic version radio mite be better. so go check on the vox wiki and test the arabic radio. its the second newest version. im gonna try it 2. wil let u know
i never used voip before. but i do however notice if i use my phone as a gprs modem for an hour or so, then i usually send a sms to my gd and all her smses deliver at the same time. now, seeing as voip uses the gprs connection 2. it does seem that the problem is related to gprs being used. my guess is that it has to do with the fact that when u are using ur gprs and someone phones or sms u thru gsm connection ur gprs is supposed to cut out, a gsm connection gets esstablished, and when the connection terminates, ur gprs connection re connects again. now we need to find out if this happens with other devices using voip. and please test it with ur devices also. (while connected with gprs and using voip see if sms deliver to u)
primitive.A said:
no route 66 wont interfere. i was thinking more along the lines of smart toolkit etc. it does seem like u got same problem. im read on another thread that the arabic version radio mite be better. so go check on the vox wiki and test the arabic radio. its the second newest version. im gonna try it 2. wil let u know
Click to expand...
Click to collapse
i will test with the arabic radio, and my voip setting.
result tomorrow.
i just u.dated to 6.1 v1.1 and installed the arabic radio. everything seems to b working fine. ill let u know as soon as i experience my first problem
nope! no luck. i just disconnected from my internet sharing app. i send a sms, and 3 smses delivered to me that should have came thru 30mins ago! damn. gonna try another radio now. if this doesnt work i tried all the radio versions on the wiki. and i honestly dont know how to fix the problem.
anyone know what the difference is between chap and pap authentication in gprs settings? and in csd line type settings.. should it b transparent or not transparent. any one can tell me the difference and if this could probably make a difference?
lastly, can i ask if anyone that is certain they not experiencing this problem can maybe tell me what their csd line settings are?
after hard reset i installed myvoipsetting too ... still work perfect.
i think prob is solved with simply hard reset
ok im happy for u! i did hard reset but still had problem. pse let me know once u experience this problem again. in the meantime i changed my csd line type to transparent. no problems so far... i guess i was thinking that transparent wouldnt block as much sms and calls as non transparent! hehe! will let u know. pse will u check ur csd line settings 2? its under start/settings/csd line type/connection element