Related
How do I remove the bootsplash totally?
the first one i OK but second one is T-Mobile G1 logo :/
Ive tried to remove logo.rle and edited init.rc but it keeps coming back.
any suggestions?
blingblingslyna said:
How do I remove the bootsplash totally?
the first one i OK but second one is T-Mobile G1 logo :/
Ive tried to remove logo.rle and edited init.rc but it keeps coming back.
any suggestions?
Click to expand...
Click to collapse
how do you replace boot splash as hate that voda image?
http://android-dls.com/wiki/index.php?title=Creating_Splashboot_Images
This worked for me, flashed both splash1 and splash2.
Cheesebaron said:
http://android-dls.com/wiki/index.php?title=Creating_Splashboot_Images
This worked for me, flashed both splash1 and splash2.
Click to expand...
Click to collapse
except it doesnt work for saphire, splash1 works splash2 doesnt
Cheesebaron said:
http://android-dls.com/wiki/index.php?title=Creating_Splashboot_Images
This worked for me, flashed both splash1 and splash2.
Click to expand...
Click to collapse
have you got any images that you have converted to share? cant be bothered with all this converting larky. is there anywhere on here where the splash images are being offered for this device? just wanna send to device........
Try to use search function next time...You can edit it in anything..
u can remove bloody brandings and replace it by something else...
http://forum.xda-developers.com/showthread.php?p=3952226#post3952226
goa200 said:
except it doesnt work for saphire, splash1 works splash2 doesnt
Click to expand...
Click to collapse
I'm quite sure that I did both of them without any problems. The splash screen shows for a very long time until the animated boot screen takes over.
name12345 said:
Try to use search function next time...You can edit it in anything..
u can remove bloody brandings and replace it by something else...
http://forum.xda-developers.com/showthread.php?p=3952226#post3952226
Click to expand...
Click to collapse
what you on about? don't tell me to search! i asked a question so if you didn't wanna answer just don't post. we don't need people like that on here. if you help then help.............. hate people like that. i help many people both on msn and in forum. i never tell anyone to do anything as its their choice.
hmmmmmmmmm if you read what i asked for then you would have replied accordingly. not your fault mate! total waste of a post!
edit: **** don't think that was meant for me............ apologies! still no need for the higher than thou attitude
Going to create some for you they are going to be here:
http://ostebaronen.dk/android/splash/
just download the raw565 files for flashing, to preview look at the other files.
EDIT: There should be 5 of them now. I can convert them for you if you supply me the image through a link or something.
Cheesebaron said:
Going to create some for you they are going to be here:
http://ostebaronen.dk/android/splash/
just download the raw565 files for flashing, to preview look at the other files.
Click to expand...
Click to collapse
sounds nice.
Did try the tutorial that was linked a few posts up but all i got was wrong digest when i tried to flash it.
Any ideas ?
i've already flashad splash1 but its not possible to flash splash2 atm. Atleast not on the htc branded Saphire
C:\sdk\tools>fastboot flash splash2 android_boot_image_black2.raw565
sending 'splash2' (300 KB)... OKAY
writing 'splash2'... FAILED (remote: partition does not exist!)
Maybe I didn't flash the splash2 afterall. Because I get the same error. Though the second splash image belongs to the ROM, so you should be able to alter that too. Let me investigate!
Cheesebaron said:
Maybe I didn't flash the splash2 afterall. Because I get the same error. Though the second splash image belongs to the ROM, so you should be able to alter that too. Let me investigate!
Click to expand...
Click to collapse
yea like i stated earlier i did try to alter skittleguys 1.4 with a diff splash but when i applied the update it just came back with wrong digest on the frame-res.apk
Ok, seems like the other boot screen comes from /system/media/boot.gif let me try to alter it to an other one Be right back with results.
Yep thats the one. Instructions are in this thread: http://forum.xda-developers.com/showthread.php?p=3918162
Works on my phone
Edit: I have this one: http://imgshack.info/images/tmat3jbiex5sphmufpm.gif
Cheesebaron said:
Yep thats the one. Instructions are in this thread: http://forum.xda-developers.com/showthread.php?p=3918162
Works on my phone
Click to expand...
Click to collapse
not on mine thoug. just getting wrong digest
ohh havnt tried replacing that gif, will do not though. would be nice to hear how i fix the wrong digest if its possible
EDIT: replaced gif but that screen last for a whole 2s. i wanna replace the one in frame-res.apk but atm just getting wrong digest
Mine lasts until it finishes booting... Let me investigate your problem though...
Did you resign it after you altered it? Also resign every apk inside it?
EDIT: Yeah, every thread that says something about No digest or wrong digest states that means the package hasn't been signed correctly. You have to sign every apk packages inside the apk file, and the apk file itself.
Cheesebaron said:
Did you resign it after you altered it? Also resign every apk inside it?
EDIT: Yeah, every thread that says something about No digest or wrong digest states that means the package hasn't been signed correctly. You have to sign every apk packages inside the apk file, and the apk file itself.
Click to expand...
Click to collapse
but i dont have to resign the apk's i dont alter right only the one i actually alter
Help!
I flashed my Vodafone HTC Magic with splash1 and now it keeps showing me the "android" animation, aint getting anyway...
How do i fix this?
Hello all
I downloaded the new ROM from the TW HTC site some minutes ago and proceed with flashing some time thouought the FLASH the pfone gave an error "Checking Custom ID"
"Update Failed"
And Android Update says ERROR 131 CUSTOMER ID ERROR
Now I can do nothing! The phone goes into HBOOT 1.76.0007 and I have a big icon with a memory chip on the bottom of the screen!
Pleace help me restore the hboot and recovery roms! The rest I'll menage.
same error..
You cant flash the update, don't do it.
Eugene is having a 32B ROM done and i belive he is uploading it atm.
32A users will soon have a flashable ROM.
WebghostDK said:
You cant flash the update, don't do it.
Eugene is having a 32B ROM done and i belive he is uploading it atm.
32A users will soon have a flashable ROM.
Click to expand...
Click to collapse
And for the ones that did it?
Great, i flashed my 32A via fastboot, and now im stuck in some strange state... I think i might have gotten a corrupt radio on it somehow...
Epedemic said:
Great, i flashed my 32A via fastboot, and now im stuck in some strange state... I think i might have gotten a corrupt radio on it somehow...
Click to expand...
Click to collapse
Yup it seems that way, as it now always hangs when flashing radio (trying a official 2.17 upgrade) grr...
Epedemic said:
Yup it seems that way, as it now always hangs when flashing radio (trying a official 2.17 upgrade) grr...
Click to expand...
Click to collapse
Yes. Cause you flashed a new HBoot.
You should wait, while romcookers will find way to downgrade new hboot
or repacked rom to flash properly to all customers, not only taiwanese.
I think it is time to clear things out:
DO NOT FLASH / UPDATE THIS ROM TO YOUR DEVICES!!!! - This means: Wait for someone to release correct ROM Updates to your devices. This official update is ONLY for TW devices. When you decide to flash something to your devices you should be very sure that you are not doing a stupid move! If someone tells you not to do it then you should hear that! Flashing something isn't like dressing a tshirt, and this means that if you choose a wrong size tshirt you can always take it off and dress another that fits you right. Flashing something that doesn't fit your device can easily brick it! Be aware!
5[Strogino] said:
Yes. Cause you flashed a new HBoot.
You should wait, while romcookers will find way to downgrade new hboot
or repacked rom to flash properly to all customers, not only taiwanese.
Click to expand...
Click to collapse
Indeed. I thought i was safe cause i flashed the files (boot.img, radio.img and system.img (which failed) via fastboot... Guess not... So now im stuck at the same screen with the cross over the ram chip
joaosousa said:
I think it is time to clear things out:
DO NOT FLASH / UPDATE THIS ROM TO YOUR DEVICES!!!! - This means: Wait for someone to release correct ROM Updates to your devices. This official update is ONLY for TW devices. When you decide to flash something to your devices you should be very sure that you are not doing a stupid move! If someone tells you not to do it then you should hear that! Flashing something isn't like dressing a tshirt, and this means that if you choose a wrong size tshirt you can always take it off and dress another that fits you right. Flashing something that doesn't fit your device can easily brick it! Be aware!
Click to expand...
Click to collapse
Yes we already know this! But it is too late! So please tell us how to fix the mess we have created!
I agree don't do stupid things in excitement. If you have eng spl etc by flashing all imgs )boot, radio etc) you may brick your device, so please please be careful wait for a update.zip file from greats mods like drizzy, eugene etc.
Once again I want to point that the purpose of this thread is help theese of us that DID the flash NOT knowing that it will NOT work!
OrionBG said:
Yes we already know this! But it is too late! So please tell us how to fix the mess we have created!
Click to expand...
Click to collapse
In my understanding the only thing you can do is to wait the official htc EU flasher (HTC said around mid November) and see if it's able to replace everything loading a proper radio/spl on the bricked device, acting on a lower level.
Otherwise you would just keep that expensive plastic brick ...
I am sorry, i was also eager to upgrade, but if HTC let you download their flasher only with a proper TW serial number, and if they've already advertised that you need to wait 2 or 3 weeks more for european firmware, then there should be a reason: so I didn't.
Hope you will be able to fix, but I am not too confident: guess you will need service.
It's ALIVE!!!! I have no idea how or why, but after tons of failed attempts and failed fastboot commands i now have the 3.03 update on my scandinavian 32a which i thought was bricked!
Epedemic said:
It's ALIVE!!!! I have no idea how or why, but after tons of failed attempts and failed fastboot commands i now have the 3.03 update on my scandinavian 32a which i thought was bricked!
Click to expand...
Click to collapse
Good. Now please write everything, what you did to get device alive)
5[Strogino] said:
Good. Now please write everything, what you did to get device alive)
Click to expand...
Click to collapse
yes yes post it please
i have no idea what actually did it, but it is possible that it was because i did a adb logcat command while the 3.03 update was running..
I can see that i have the 1.76 spl, and the new radio (which kept failing on me before)
i have try now to do adb logcat while update is running, but adb continuos stay in waiting for device, or say adb server is out to date ecc
Epedemic said:
i have no idea what actually did it, but it is possible that it was because i did a adb logcat command while the 3.03 update was running..
I can see that i have the 1.76 spl, and the new radio (which kept failing on me before)
Click to expand...
Click to collapse
Strange thing... adb logcat simply outputs log into console... How outputing logs can affect to flashing properly?
p.s. please post your full SPL-info too.
p.p.s. I think we need get right order to flashing this update. You tried to flash images via fastboot. What order do you have at first (boot - 1, radio - 2, system -3)?
What did you do at last?
i can't accesso to fastboot mode beacuse the phone stay in RUU USB ..
Hi folks!
My desire should arrive within a week or so. The past days i tried to collect as much data about getting full root-access with r/w access to /system.
We probably need a modified SSPL and a HardSPL. So far i've tried to contact cmonex, gauner1986 and haykuro to help us here.
So there is the first question to you (desire owners): Do we have jtag on the desire? Haykuro asked me; jtag is required otherwise testing is impossible.
Haykuro said:
you guys got jtag on it? If not it'd be brick heaven as we work on that
Click to expand...
Click to collapse
UPDATE 1:
We found one device with r/w-access to /system, but we don't know where the security flag is set, so we can't set it to "normal" phones.
Adam235 is currently analyzing the dumped files.
UPDATE 2:
ahmgsk provided his recovery. Playtime.
http://www.multiupload.com/XTRBWD6ML2
Update 3:
Nand was unlocked for the EVO 4G. Maybe this helps us.
Update 4:
New root method, which should work with any new 2.1 HTC Phone, but we still don't have full write access to /system:
http://forum.androidspin.com/showthread.php?p=13939#post13939
Well first off, good luck.
Don't we need schematics to know that or at the very least to rip apart the Desire to access motherboard and possibly find JTAG pins ?
Any less barbaric way? :<
sruon said:
Well first off, good luck.
Don't we need schematics to know that or at the very least to rip apart the Desire to access motherboard and possibly find JTAG pins ?
Any less barbaric way? :<
Click to expand...
Click to collapse
It seems this is the only way...
Anyone has high res picture of the desire MB ?
i6bazar said:
Anyone has high res picture of the desire MB ?
Click to expand...
Click to collapse
some one have posted it on modaco irc channel, but u need a full working xda-china account, after register i still have problem
http://www.xda-china.net/thread-52190-1-1.html
Here's some pictures of the Desire. Credits to original poster(百事可乐) of Xda-china !
Judging by the usb bricking showing the phones as qualcomm devices, and further by the mention of some Qualcomm development/debug tools mentioned on XDA, i'd say if anything, the JTAG connection is obtained via the USB port, and is activated by somehow switching the device to the debug mode.
alias_neo said:
Judging by the usb bricking showing the phones as qualcomm devices, and further by the mention of some Qualcomm development/debug tools mentioned on XDA, i'd say if anything, the JTAG connection is obtained via the USB port, and is activated by somehow switching the device to the debug mode.
Click to expand...
Click to collapse
It think also that this can be a possibility
Ahem...I think you mean joint first JD.
Thanks for the input so far.
Over at modaco someone got a phone with full r/w access to system.
Anyone got an idea which addresses we need to dump the spl with pmemdump?
Here is the link to modaco. The user is called maddoxus.
http://android.modaco.com/content-page/309939/usb-brick-rickrolled-b0rked-fixed/page/120/#
Kubino is working on dumping the spl!
allla said:
Here is the link to modaco. The user is called maddoxus.
http://android.modaco.com/content-page/309939/usb-brick-rickrolled-b0rked-fixed/page/120/#
Kubino is working on dumping the spl!
Click to expand...
Click to collapse
We have dumped hidden part (containing radio, spl, splash ....), Adam235 is analyzing the dump.
kubino99 said:
We have dumped hidden part (containing radio, spl, splash ....), Adam235 is analyzing the dump.
Click to expand...
Click to collapse
This is fantastic news, a proper root may be possible now
DocRambone said:
This is fantastic news, a proper root may be possible now
Click to expand...
Click to collapse
We don't know yet if we are able to write to hidden part, assuming it would be not that easy. ;-)
kubino99 said:
We don't know yet if we are able to write to hidden part, assuming it would be not that easy. ;-)
Click to expand...
Click to collapse
Maybe Adam235 or you should also try to contact haykuro or cmonex.
allla said:
Maybe Adam235 or you should also try to contact haykuro or cmonex.
Click to expand...
Click to collapse
We have found yesterday that superCID can be achieved by setting 2 flags in NAND. One we have successfully set, the other one seems like it's in radio section.
kubino99 said:
We have found yesterday that superCID can be achieved by setting 2 flags in NAND. One we have successfully set, the other one seems like it's in radio section.
Click to expand...
Click to collapse
And the second flag is not changeable?
brilliant news..would be good if info could be found as and when its happening-is ther an Irc channel floating about where announcements and info is shared?
dread123 said:
brilliant news..would be good if info could be found as and when its happening-is ther an Irc channel floating about where announcements and info is shared?
Click to expand...
Click to collapse
irc.freenode.org #modaco
allla said:
And the second flag is not changeable?
Click to expand...
Click to collapse
we don't know yet where it's exactly, it's not so easy to find. you can connect to modaco IRC and involve in development.
After waking this morning and seeing the length's SCEA are going to to halt the PS3's jailbreak I am reluctantly withdrawing from the distribution of PSFreedom in any form.
You can see more of what SCEA are doing here: http://psx-scene.com/forums/showpost.php?p=535680&postcount=1
Keeping my Family intact is more important to be than hacking a games console.
Klutsh
nice work dude
GREAAT !!!
hats of chap great work going to install this later thanks
thanks Klutsh, your awesome
time for me to start tinkering with dev_flash... hehe
"An error occured while loading PSFreedom./tmp/recovery.log was copied to /sdcard/psf/recovery.log.
Please report the issue on XDA"
gonna get the log file for you now
edit: herp derp, my phone refuses to boot
great stuff...
Thanks for all your hard work, guys! Fantastic stuff!
Do you think we'll ever see this as a "fake flash"?
Great work!! Let's try!
" including ABD and Mass storage toggle." Simply awsome
Excuse my lack of knowledge, but what exactly is the difference or advantage to the PSFreedom App you created?
Keep up the awesome work!
yeah.. after rebooting to try and get you that log, my phone seems to be stuck in a HTC logo -> off -> reboot -> HTC logo -> off loop, any suggestions? I can go back into recovery/hboot fine... but not my phone
@stoker25, This should not effect your normal rom in any way.
mrmeotz said:
Excuse my lack of knowledge, but what exactly is the difference or advantage to the PSFreedom App you created?
Keep up the awesome work!
Click to expand...
Click to collapse
It's ROM independent, so sense users can use it too
Klutsh said:
@stoker25, This should not effect your normal rom in any way.
It's ROM independent, so sense users can use it too
Click to expand...
Click to collapse
how come I can't boot back into my rom then? now i've got to reflash, great...
stoker25 said:
how come I can't boot back into my rom then? now i've got to reflash, great...
Click to expand...
Click to collapse
try taking your SD card out.
But honestly this does not touch your /system, /data or /boot partitions at all
Really? That is ****ing sweet!
So you're saying that i could jailbreak my PS3, even though im running i.e. FroYo 2.2 ? Sounds swell..although i grew pretty fond of Open Desire..
Big thx @ klutsh
Klutsh said:
try taking your SD card out.
But honestly this does not touch your /system, /data or /boot partitions at all
Click to expand...
Click to collapse
still doesn't fix it :/
heres the recovery log:
http://stoker25.com/files/recovery.log
stoker25 said:
still doesn't fix it :/
heres the recovery log:
http://stoker25.com/files/recovery.log
Click to expand...
Click to collapse
Typical recovery log shows that everything worked, although it still flagged an error.
The log is the ONLY file that my code additions write anywhere on the device other then the recovery img flashing.
I am honestly at a loss to what can cause your main rom to fail booting.
What rom do you normally run?
Klutsh said:
Typical recovery log shows that everything worked, although it still flagged an error.
The log is the ONLY file that my code additions write anywhere on the device other then the recovery img flashing.
I am honestly at a loss to what can cause your main rom to fail booting.
What rom do you normally run?
Click to expand...
Click to collapse
i was using ieftm's rooted 2.2 rom (the first one he made, it's probably outdated now), i'm thinking it might have something to do with the symlinked bootanimation, since it reboots before it shows it. gonna reflash now anyway, since i've been meaning to for a while...
can anyone upload unrEVOked for desire???
and can i use HTC sense rom?
So let me get this right, now we can have this with any rom and keep all usb usage (I'm using leedroid 2.1) within our roms? Just adds an extra menu in recovery?
TheIntruder said:
So let me get this right, now we can have this with any rom and keep all usb usage (I'm using leedroid 2.1) within our roms? Just adds an extra menu in recovery?
Click to expand...
Click to collapse
Yes
10char
Fantastic work! Another question I have never used unrevoked, rooted it another way can i do it via clockwork recovery or rom manager?
Sent via smoke signals
Just got a notification that a new update is available for AT&T H910.
Anybody take the plunge?
I still haven't rooted ... was going to try Alpha. Now waiting for Super 2.0. Hoping ARB is still 0.
mitbit2k3 said:
Just got a notification that a new update is available for AT&T H910.
Anybody take the plunge?
I still haven't rooted ... was going to try Alpha. Now waiting for Super 2.0. Hoping ARB is still 0.
Click to expand...
Click to collapse
Yea I got it but rooted with alpha. Its only 64mb. Probably a security update. For a split second I was like, "holy crap its oreo!!" Then remembered that would be a pipe dream.
can you guys supply a dump so I could update SuperV20 to it?
@hawkeye29 Can you pull it and post a link? I still can't completely extract it yet, but I can tell if it increments ARB.
Despite what some people think, AT&T updates aren't encrypted, they just use two forms of compression .. it is really weird, but also extremely efficient.
-- Brian
runningnak3d said:
@hawkeye29 Can you pull it and post a link? I still can't completely extract it yet, but I can tell if it increments ARB.
Despite what some people think, AT&T updates aren't encrypted, they just use two forms of compression .. it is really weird, but also extremely efficient.
-- Brian
Click to expand...
Click to collapse
Here's the FOTA folder
https://drive.google.com/file/d/1QpDNBgzr4odnAwij_EjemwAxVOSE8exL/view?usp=drivesdk
What astounds me is that both lg and AT&T have outdated software information listed. Att still has 10r and lg has 10l on one site and 10q on their opensource site. Slackers.
Still ARB 0
The update installed by itself. Hmm ....
@runningnak3d do you think it is feasible to be able to extract the dlpkgfile within Linux? It would be so much easier to pull the files from that than use lgup.
Eventually I should be able to, but it hasn't been a priority. They use BSDIFF, IMGDIFF and gzip. It is a matter of figuring out which diff is done first, is the first diff compressed or the second diff compressed, and the order the diffs are made.
It may be something as simple as using BSDIFF on some partitions, and IMGDIFF on others.
LMAO - while I was typing this, I figured I would type android bsdiff imgdiff into Google -- this is what I got.
It will be very easy to extract it....
EDIT: extract is the wrong word. It will be very easy to apply this patch to a dump of 10t -- or it would be, but I just don't even have that time right now. I *REALLY* want to finish the lafsploit so I can move on to things like this
-- Brian
runningnak3d said:
Eventually I should be able to, but it hasn't been a priority. They use BSDIFF, IMGDIFF and gzip. It is a matter of figuring out which diff is done first, is the first diff compressed or the second diff compressed, and the order the diffs are made.
It may be something as simple as using BSDIFF on some partitions, and IMGDIFF on others.
LMAO - while I was typing this, I figured I would type android bsdiff imgdiff into Google -- this is what I got.
It will be very easy to extract it....
EDIT: extract is the wrong word. It will be very easy to apply this patch to a dump of 10t -- or it would be, but I just don't even have that time right now. I *REALLY* want to finish the lafsploit so I can move on to things like this
-- Brian
Click to expand...
Click to collapse
Yep I need a whole dump also
dudeawsome said:
Yep I need a whole dump also
Click to expand...
Click to collapse
I went back to full stock to do this. Unfortunately ATT is giving me some bs that the update isn't available. Probably because it already downloaded once today and refuses to check the server again. I'll attempt to update tomorrow and post a public link to the dump.
toastyp said:
I went back to full stock to do this. Unfortunately ATT is giving me some bs that the update isn't available. Probably because it already downloaded once today and refuses to check the server again. I'll attempt to update tomorrow and post a public link to the dump.
Click to expand...
Click to collapse
try with lg bridge tool
dudeawsome said:
try with lg bridge tool
Click to expand...
Click to collapse
LG bridge doesn't work with the h910. I believe the model has to have a kdz available for it to work. Most of the useful LG stuff doesn't work well for the h910. LG backup has problems for me and there isn't an update center.
Just tried again to be sure. Just says "unable to check software version"
Hey I checked again for the update and it attempted to but returned nothing. ATT is really pissing me off. If someone else who has already updated can dump it you will probably get your hands on those files faster. Otherwise I'll check again in another 24 hours
toastyp said:
Hey I checked again for the update and it attempted to but returned nothing. ATT is really pissing me off. If someone else who has already updated can dump it you will probably get your hands on those files faster. Otherwise I'll check again in another 24 hours
Click to expand...
Click to collapse
When I returned to stock 10q it was a week or so before I received the update to 10t. Its a pain in the azz
hawkeye29 said:
When I returned to stock 10q it was a week or so before I received the update to 10t. Its a pain in the azz
Click to expand...
Click to collapse
Thanks for the heads up. Even factory reset again to check for the update another time and still no dice. Hopefully they will push the update again and I can grab it for all of us.
Here are the official details for the update:
https://www.att.com/devicehowto/tut.../id/stepbystep_KM1171033?make=LG&model=LGH910
My phone still refuses to "see" it. I have been doing the check update thing for a few days now.
haris163 said:
Here are the official details for the update:
https://www.att.com/devicehowto/tut.../id/stepbystep_KM1171033?make=LG&model=LGH910
My phone still refuses to "see" it. I have been doing the check update thing for a few days now.
Click to expand...
Click to collapse
Still no update for my phone. Is this normal? I used to get updates right away. Is there a way to force the update?
Sent from my LG-H910 using Tapatalk