can someone please tell me were to get the htc software keyboards from!!
i put 6.5 on my phone but there are no software keyboards but the windows 1..i need them please please help!
the default HTC keyboard is called "EzInput". Searching for that will yield you better results.
Also check out the new "FingerKeyboard" I find it works alot better then the default one. It is one I use currently.
Another keyboard I found worked very well was Spb Keyboard. It allows finger gestures for backspace and space. Helps alot.
Also PocketCM Keyboard is REALLY sweet if you can get it set up properly. This keyboard allows for "sloppy" typing. Using this keyboard, you don't have to press the keys exactly. It references your taps against a dictionary and is pretty accurate.
I like the look and feel of FingerKeyboard but find the way PocketCM Keyboard works simply amazing. Both keyboards allow skinning. A mix of the two would be amazing.
hello people
if got a little problem white my keyboard on my cruise
i did an update to wm 6.1 nld on the official htc site
everything works good but i think is much to slow
so i downloaded 3LIT3_VIII_Full_NLD and installed it
but now my keyboard doesnt work 100%
i can use the qwerty keyboard without problems
but when i want to use the xt9 keypad then i can only type numbers
character or alphabet doesnt work
can somebody give me an answer please
thank you greetz pet
Try this!
http://www.4shared.com/file/112390528/29099d60/BJK_HTC_EzInput_QVGA_NoKbd_0409-RC2.html
from this thread : http://forum.xda-developers.com/showthread.php?t=426281&highlight=BJK_HTC_Ez%2A
When you have numbers, than change to a other keyboard and write one or two words. after this, you change the keyboard again and it works.
If have the same problem with gullum Ez 1.5 keyboard. Now i have BJK Keyboard and german language pack and it works fine
XDANoob said:
Try this!
http://www.4shared.com/file/112390528/29099d60/BJK_HTC_EzInput_QVGA_NoKbd_0409-RC2.html
from this thread : http://forum.xda-developers.com/showthread.php?t=426281&highlight=BJK_HTC_Ez%2A
When you have numbers, than change to a other keyboard and write one or two words. after this, you change the keyboard again and it works.
If have the same problem with gullum Ez 1.5 keyboard. Now i have BJK Keyboard and german language pack and it works fine
Click to expand...
Click to collapse
Thank you problem solved
Hello,
I am looking for a replacement of the build in sw keyboard for my HD2. I liked the idea of sliding over the keyboards.
I found different sliding keyboards - the funny thing is that every company writes something about "patents" and unique
I tried already SlideIT and ShapeWriter, because both are available for testing. But it seems that swype is not available. I suppose it should just be bundled with pdas (e.g. omnia 2)
Now my questions:
- Are there other solutions available?
- How are the chances to have Swype on the HD2?
- I have stability problems with SlideIT on my HD2
(e.g. the screen area for SlideIT are not correctly drawn, and keeps
destroyd...)
Is there someone running SlideIT on the HD2 without problems?
Any other notes are welcome...
Best regards,
stefan
Links:
SlideIT (from dasur)
http://www.mobiletextinput.com/
ShapeWriter:
http://www.shapewriter.com/
Swype
http://www.swypeinc.com/
I contacted Dsaur (SlideIT) yesterday ; below is a section of the emai I sent .
"I have stumbled on a problem, whilst trying to use my phone horazontaly in Opera or tryng to text message the SlideIT keyboard does not function correctly do you have a fix inplace for this?
At the moment this is the only thing stopping me making a purchase.
Many Thanks "
==> This is there reply !!
"Yes we will fix this bug and it will be corrected in our next demo release soon (about 2 weeks). Regards
Daniel"
I cant wait I really do like this Keyboard
Scuzzy
You can try a ported version of SWYPE
It is ported from Verizon's Omnia II (same resolution as HD2)
http://www.mediafire.com/file/ungnttnzmwa/Swype.cab
Working!!! Rom WWE 1.43
On NON-WWE ROMs you have to move the swype folder from your locale program files folder to /Program Files/
Source: modaco
ronin1 said:
same as you!
SlideIT is for sure amazing!
It has instantly increased my typing speed by 30-40%
http://mobiletextinput.com/
This is the best application ever seen!
Click to expand...
Click to collapse
Does it work ok for you?? I get this error.... (3)missing lang data!!!
inmatrixout said:
You can try a ported version of SWYPE
It is ported from Verizon's Omnia II (same resolution as HD2)
http://www.mediafire.com/file/ungnttnzmwa/Swype.cab
I haven't tried it myself yet!!!
Source: modaco
Click to expand...
Click to collapse
Did not work for me
umiss said:
Did not work for me
Click to expand...
Click to collapse
It is working! I just try it!!!
Smooth and awesome!!!
I don't know what is wrong with your device!
umiss said:
Did not work for me
Click to expand...
Click to collapse
try soft resetting after install
it works here.
Anyone got it to work an an non english rom? I have a Dutch HTC HD2 and it doesn't work..
-NRG- said:
Anyone got it to work an an non english rom? I have a Dutch HTC HD2 and it doesn't work..
Click to expand...
Click to collapse
on NON-WWE ROMs you have to move the swype folder from your locale program files folder to /Program Files/
Thanks, it works now. Good to know!
All though i didn't find it as useful as i hoped.
-NRG- said:
Thanks, it works now. Good to know!
All though i didn't find it as useful as i hoped.
Click to expand...
Click to collapse
It is quiet difficult for the first time users!
I need more practice!
SlideIT
I purchased the slide it keyboard. I fell in love with it from the start. It is working without problems on my HD2. I have noticed the same problem, mentioned earlier, about the landscape typing. It works, but it doesnt look right.
It has increased my text speed at least 50%! It doesn't play well with entering usernames and passwords, however. I find myself changing back to touch input for this.
is there any way to get GERMAN DICTIONARY for swype? because i've only spanisch and english
Swype is pretty interesting... I find myself giggling inside a little every time I *swype* a long word.
Yeah, Swype is pretty good from initial impressions. I've tried slide-it, shapewriter and I find swype's keyboard to be laid out the best (in terms of straight typing and not swiping).
Amazing
I tried SlideIT. It's ok, but I don't like the design and it does not support landscape. That's a deal breaker.
Swipe is my favorite: good design, fast. Unfortunately it's only in Spanish and English....
I am not satisfied with ShapeWriter. It did not recognise most of the words and is only avalaible in Qwerty.
I have WWE 1.43
Why doesn't it work for me?
Its installed in root/Program Files/
I can go to settings > personal > input and its there, but whenever i choose it, it automatically goes back to the default htc keyboard.
You can modify the input with SK Tools or a cab named SIPChange.
Installed th .CAB file that already puts the program in root\program files, but it does not work om my HD2. The only thing I see after enabling Swype, is a black square that fills up the left half of the screen. I'm using Dutch ROM 1.43. Any ideas/suggestions how to get it to work?
regards, Kuzibri
OK, after downloading the .CAB file from different sources, I got it working. First impression: Not much difference with SlideIT, but can be judged only when there is a Dutch dict for Swype. Anyone?
Now I have this error message with SlideIT:
(3)missing lang data!!!
What can I do? Impossible to uninstall/install the cab.
Dear Sir,
I know, it is a very common question BUT I have a problem with it. Since I had Qtek 9100 I do know about thing or two considering keyboard layout. But, again, Rafael seams to me a lot different than my ol' 9100.
First thing's first, I don't know witch keyboard layout is printed on keyboard. I am attaching an image of keyboard, and I am grateful for providing me this useful info.
Link:
Second, if someone can give me a short tutorial how to change layout I would be most grateful for that.
I do know how to change keyboard on qtek 9100, but it seams that this change is a bit more complicated, and I've spent about two days trying to change the keyboard.
Thank you
This is the sprint keyboard and u can change the layout with a program called TarusBullba Tilt keyboard fix. i had the same problem and that worked
I've installed keyboard fix, it isn't remapping them to fit properly. Numerical pad that is on the upper row of keyboard with TarasBulba fix is located on the right middle part of keyboard.
Is there a registry fix for remapping the keyboard?
Is the keyboard Swedish, Finnish or else?
Thank you
Mine is english and just works. U may also try some options in AdvancedConfig but i'm not sure if it will help.
Hi,
I have a problem guys, in my smartphone, htc touch pro, I have the qwerty's touch keyboard, but I want the alphanumeric keyboard, like an a classical cellphone, Can you help me? Please, an a cab that install this alphanumeric keyboard in Ita Language, please, thanks a lot and sorry for my bad english
Have you tried looking through this Thread??? This keyboard app might have the layout you're looking for...
http://forum.xda-developers.com/showthread.php?t=501219
Supports the fuze (VGA) screen resolution.
Hope this helps you...