Situation is like this, I was using newest 6.5 version but wanted go down to older, upgrade failed with message that file is corrupt.
Now when I turn on phone I see only HTC logo.
Hard reset does not work because as soon as I unpress softkeys logo appears.
I can enter bootloader and start upload but always 3% progress and not more.
upload from SD card does not work
bootloader (color bars) shows
ONBL 1.35.0000
SPL 1.35.0000
CPLD - 04
Code:
Cmd>getdevinfo
Device Model ID = V O X 0 1 0 1 0 0 HTCSVOX010100»S4HTCE
Cmd>
item is SPV E650 from Orange UK
I tried almost all ROMs from FTP but no luck, wrong VENDER ID
however this one
RUU_Vox_HTC_WWE_1.15.405.2_4.1.13.37_02.83.90_Test.exe
gave me INVALID MODEL ID
if you can cook something then please do !
jazzzy said:
Situation is like this, I was using newest 6.5 version but wanted go down to older, upgrade failed with message that file is corrupt.
Now when I turn on phone I see only HTC logo.
Hard reset does not work because as soon as I unpress softkeys logo appears.
I can enter bootloader and start upload but always 3% progress and not more.
upload from SD card does not work
bootloader (color bars) shows
ONBL 1.35.0000
SPL 1.35.0000
CPLD - 04
Code:
Cmd>getdevinfo
Device Model ID = V O X 0 1 0 1 0 0 HTCSVOX010100»S4HTCE
Cmd>
item is SPV E650 from Orange UK
I tried almost all ROMs from FTP but no luck, wrong VENDER ID
however this one
RUU_Vox_HTC_WWE_1.15.405.2_4.1.13.37_02.83.90_Test.exe
gave me INVALID MODEL ID
if you can cook something then please do !
Click to expand...
Click to collapse
you need to flash orange uk rom(as it has your vendor id!) and after you've to do a hardspl! thas all
hashtowent said:
you need to flash orange uk rom(as it has your vendor id!) and after you've to do a hardspl! thas all
Click to expand...
Click to collapse
there is no such ROM on XDA FTP however I found a working one that made my device back to life
if you need Orange UK ROM here it is
http://skocz.pl/orangerom
EOT
First choice for branded devices is the original ROM, so you are lucky to get it and it should work. The Vodafone V1415 is device where no official ROMs are available and there you have to use the "Gold Card" method (search for this in the Forum and Wiki). This will put a special key in the boot sector of a (non SDHC) card (devicetype and card-serial dependent) which allows you to load ANY ROM from the bootloader.
jazzzy said:
Now when I turn on phone I see only HTC logo.
Hard reset does not work because as soon as I unpress softkeys logo appears.
I can enter bootloader and start upload but always 3% progress and not more.
upload from SD card does not work
bootloader (color bars) shows
Click to expand...
Click to collapse
if u get it to work then tell me how u did that... i really want to know!!!
i got fed up when that happened to me.
when the htc logo continues, it means u phone is hanged. and even the time clock of the cpu stops. after 5-10 minutes u can also see the htc logo flickering a bit!!!
if u have the same problem then u will have to give your phone to the service center.
SAHILISTHEBEST said:
if u get it to work then tell me how u did that... i really want to know!!!
Click to expand...
Click to collapse
simple
you load bootloader (via camera button method)
next you start flasher from your PC and upload ROM
trick is to find the right ROM because when your phone is locked you can use only dedicated one which is compatible with your operator
otherwise there is a magic described above
once again EOT
jazzzy said:
simple
you load bootloader (via camera button method)
next you start flasher from your PC and upload ROM
trick is to find the right ROM because when your phone is locked you can use only dedicated one which is compatible with your operator
otherwise there is a magic described above
once again EOT
Click to expand...
Click to collapse
i tried the method u stated. i always prefer this one over any other. but it did'nt work for me. now its the headache of service centre guys since it is still in warranty!!!
Did you lookup the Gold Card method? This WILL work - as this is exactly what the service will do. I am sure this is not a warranty case, but you maybe lucky.
tobbbie said:
Did you lookup the Gold Card method? This WILL work - as this is exactly what the service will do. I am sure this is not a warranty case, but you maybe lucky.
Click to expand...
Click to collapse
yeah, i too think was not a warranty case but i gave a try and yes, i got lucky since this was the 6th time i gave my phone for a warranty claim.
OK, tired of trying new ROMs now? To be in the safe side you need to understand how things work:
1.) SIM-Lock (your phone is locked to a network/SIM Card) will stay even after ROM change. There are services to Unlock your phone and allow any SIM card. This has nothing to do with "Application Unlock".
2.) Application Un-Lock is the method to allow any program to run on your device. This is achieved by changing security settings in the registry of the WM operating system. Only privileged applications may do this - mostly "SDA Application Unlock" can do the job.
3.) Some devices are "branded" and the device carries a "Vendor ID" so that only ROMs can be put on the device where the ROM "Vendor ID" matches that of the device. Examples are: Orange E650, Vodafone VDA-V or V1415. This has nothing to do with SIM-Lock, even though many branded devices are SIM-locked as well (not VDA-V which I have one). The check for the Vendor-ID can be skipped either using a universal loader "USPL" (which is usually part of the cooked ROM distributions and called from a batchfile) or the "GoldCard method" which is your last resort and will ALWAYS work.
BTW: GoldCard is the slang for a special prepared microSD or miniSD card, not a SIM card! And it is NOT the process of loading a ROM from these cards - which is an alternate method of loading a ROM, e.g. if the Windows/USB is not an option.
tobbbie said:
GoldCard is the slang for a special prepared microSD or miniSD card, not a SIM card! And it is NOT the process of loading a ROM from these cards - which is an alternate method of loading a ROM, e.g. if the Windows/USB is not an option.
Click to expand...
Click to collapse
does gold card method works with 4gb micro sdhc?
No it will not work with a SDHC card. The device in boot-loader moder seems not to be able to access the SDHC card. A normal (up to 2GB) card will work however - any size will do it as only the bootsector will get some bytes written to. The card remains usable - you can even take a card with data on it - writing the data to it to make it a "GoldCard" will not harm the data stored on it.
Mind that the key written is specific for a certain device-type, e.g. the Vox. It will work in any Vox then, however.
Related
After flashing to a new ROM - WM6 the phone didn't boot the WM6 installation. Instead the old Orange logo appeared and entered in bootloader mode. I tried restoring the ROM from the original WM5 ROM (Orange RO) but it said Not Allowed. Ok... I flashed then a Cingular WM5 ROM and it worked. The initial logo changed and the OS booted. Immidiatly after the Windows Mobile splash I got a message "Data Crashes. Contact service center". If I remove the SIM card the message dissapears. I think something got screwed during the first flash since it didn't go through. I mention that I used the same ROM to flash another C600 phone and it works perfectly.
So... now I can boot up Cingular WM5 and play around with applications, but as soon as I insert my SIM card the Data Crashes message appears. It is my guess that some vital information such as the IMEI got screwed or a checksum somewhere is not checking.
Do you have any ideea how can I fix this?
You didn't superCID did you?
Sounds like you screwed over your GSM section, check with the SPV Services client if it can read your CID/SIM-Lock status
Phil
It was probably that... but to my knowledge I ran lokiwiz.bat.
No, SPV Services can't read the info from my phone - Illegal readZone attempt - RAPI init failed
stargatesg1 said:
It was probably that... but to my knowledge I ran lokiwiz.bat.
No, SPV Services can't read the info from my phone - Illegal readZone attempt - RAPI init failed
Click to expand...
Click to collapse
this means your phone was not application unlocked properly..
Right! Now spv-services works.
When clicking on the SIMLock Tools I get phone unlocked 00000000000000.
When clicking on the CID Tool I get:
Current CID: 0800313131313131313100000000000000000000000000000000000000000000
Technical details:
Now: 160 = 87554b2c510d9ed5da3c2b29dc9068653ce2b67d2065595e3ce2b67d2065595e, 160 = 4d0c1bd5d17f2fc4
Chg: 160 = 87554b2c510d9ed5da3c2b29dc9068653ce2b67d2065595e3ce2b67d2065595e, 160 = 4d0c1bd5d17f2fc4
cool. Enjoy!
Ok, now try flashing WM6GSMUPDATE and then a WM6 ROM and it SHOULD work
Phil
I flashed the WM6GSMUPDATE and then the WM6 ROM and it still doesn't work. After flashing the WM6 ROM I get returned to the old ROM's bitmap with Cingular logo and then the bootloader appears. Any ideeas? Can you give me a direct link to the latest WM6 ROM? Perhaps mine is somehow damaged although I succesfully flashed another C600.
Thanks.
Any ideas? Please?
Is there any way to fix the "Data crashes. Please contact your service center." problem using a HTC Tornado?
Htc Sda T-mobile Is Dead
MY PHONE IS DEAD WHEN POWER UP ONLY SEE T-MOBILE AND DEAD, THE PROBLEN I HAVE WHEN I try flash a WM6 ROM AND MY COMPUTER SHUT DOWN, NOW IS IMPOSIBILE TO ME TO MAKE A RESET OF THE PHONE YOU KNOW WHAT I NEED TO DO, THANK YOU AND I WAIT YOUR ANSWER
Can you get to the bootloader? If yes, then try flashing again.
hi guyz
am going to upgrade my XDA-Exec (Universal) G4 for the first time. its currently running WM5 from O2 but i am going to use it with another Service Provider.
now want to make sure of couple of things.
first... is there any HardSPL type of programe for Universal so that atleast i dont endup bricking the phone ?
second what exactly does the CID/EROM locks are for or SIM lock. I can use my other companies SIM in this phone so do i still need to do it ?
third how safe is the ROM updating without anything like HardSPL....?
reason why iam asking this is because its my friends phone and dont wanna brick it and second i have upgraded my HERM but have not done a Universal WM5 to 6 or 6.1 upgrade
Welcome.
No Their Is No HardSPL For Universal.
IMHO CID Unlocking Should Be Done As Various Bootloader Commands For Recovering The Device Will Only Work On A CID Unlocked Device. (I Think!)
Rom Upgrading Is Relatively Safe. Jus Make Sure The Battery Is Fully Charged.
Read The WIKI For More Information.
I Hope All Goes Smoothly For You.
P.S I Highly Reccomend Tomal's 8.0 Rom!
Regards,
OllieD
aaaa what is IMHO CID ? and how do i unlock it ?
Tis In The Wiki...
This Link Should Help You Out...
http://wiki.xda-developers.com/index.php?pagename=Uni_Simlock_by_Buzz_and_team
This Tool Is For Sim Unlocking The Device But Also Makes The Device SUPERCID (SUPERCID Unlocks All Bootloader Commands)
Regards,
OllieD
STUCKK .... Yikeeesss
guyz ..
i got the ROM updated last night and was using when i finally thought of using another ROM... while upgrading the other rom it just gave and error message on the PC and the phone was on the page where it ask you to press 0 for default ... so i did that and the phone restarted but now its stuck on the Splash Screen (the O2 operator starting screen) ...
if i connect the phone to the PC it will not recognize the phone as its totally stuck on the Splash screen ... if i try to goto the bootloader screen it gives me the same message of either Pressing X or 0 ... also the USB is not recognizing it ..
what to do .????
Hi guys
i am confusing about my Sapphier because i buy my mobile yesterday from Vodafone in uk and the sales man told me this phone work just with vodafone sim card , and by mistake i insert T-MOBILE sim card and itis work
every thing itis work "internet - 3G...etc
So its my phone lock or unlock ? and if its unlock , can i flash the ROM ?
MOBILE NUMBER:1.5
FIRMWARE : 1.5
BASEBAND:62.50S.20.17U_2.22.19.261
KERNAL:2.6.27-00393-G6607056 [email protected] #1
BUILD NUMBER : CRB43
any one please?
Find out what SPL you have. You can do that in fastboot mode while powering down your phone. And then press Home+End/Power to get it there. Write down the first lines in the application.
boy4ngage said:
Hi guys
i am confusing about my Sapphier because i buy my mobile yesterday from Vodafone in uk and the sales man told me this phone work just with vodafone sim card , and by mistake i insert T-MOBILE sim card and itis work
every thing itis work "internet - 3G...etc
So its my phone lock or unlock ? and if its unlock , can i flash the ROM ?
MOBILE NUMBER:1.5
FIRMWARE : 1.5
BASEBAND:62.50S.20.17U_2.22.19.261
KERNAL:2.6.27-00393-G6607056 [email protected] #1
BUILD NUMBER : CRB43
Click to expand...
Click to collapse
it is unlock as i have the same phone. you need to root it first then flash whatever you want. its so easy after rooting......... flash direst from sd card by using home+power button when phone is off as no need for all that adb push stuff. you can actually place the Rav1.1.1G.img straight to sd card without all the messing........ if you look at commands that all you doing anyway.............but using sdk tools. i use an external card reader to copy all files over, pop back in phone and do ma thing
Cheesebaron said:
Find out what SPL you have. You can do that in fastboot mode while powering down your phone. And then press Home+End/Power to get it there. Write down the first lines in the application.
Click to expand...
Click to collapse
thanx
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0004 (SAPP10000)
RADIO 0-2.22.19.26I
APR 9 2009,23:30:40
shingers5 said:
it is unlock as i have the same phone. you need to root it first then flash whatever you want. its so easy after rooting......... flash direst from sd card by using home+power button when phone is off as no need for all that adb push stuff. you can actually place the Rav1.1.1G.img straight to sd card without all the messing........ if you look at commands that all you doing anyway.............but using sdk tools. i use an external card reader to copy all files over, pop back in phone and do ma thing
Click to expand...
Click to collapse
you are the best meat
can you send to me link for the step to rooting also if you have advice for me please tell me before i do the rooting
Look here: http://forum.xda-developers.com/showthread.php?t=517948 for Rooting.
Look here: http://forum.xda-developers.com/showthread.php?t=529019 for Flashing SPL to enable usage of third party roms.
boy4ngage said:
you are the best meat
can you send to me link for the step to rooting also if you have advice for me please tell me before i do the rooting
Click to expand...
Click to collapse
right this is the safest root method as it gives you recovery options
http://forum.xda-developers.com/showthread.php?t=530492
also check the wiki. do 1st 5 steps on wiki then follow link above. once thats done you ok
than x guys you help me allot
Dear All,
After two years of loyal services my spv e 650 , alias HTC Vox quit working . It is not booting at all , although It is starting in boot loader mode. My problem is that it is a branded orange romania phone , and I'm not able to find an original Rom version, neither to burn an unbranded version , because of the 1.22 USPL , which I'm not able to downgrade because the phone doesn't start in normal mode , in order to have an active sync connection for the USPL up(down)grade. To resume : phone is branded , doesn' t start in normal mode , but does start in boot loader ( version of SPL 1.22.0000 ). Is there any way to burn an unofficial Rom version ? Thank you in advance for any advices ,
Liciniu
Look up the "Gold Card" method in the Wiki. You need a non-SDHC memory card of any size and the free programs mentioned. It will write a special key to the boot sector of the memory card that will allow to load any ROM to the device in bootloader mode.
Hi Tobbbie,
After several tries ( I don't know what went wrong ) I've managed to do it. although it worked with only one version of ROM , HTC made, but I do have a fully functional phone . Many, many thanks for your hint,
Liciniu
Good to read that - I also have to revise my statement about which ROMs are loaded with the Gold Card method. Only valid signed ROMs (either HTC or other branded ones) will load - cooked ROMs are not loaded with the Gold Card method as they are not valid signed.
I have a problem on my HTC HD7. I tried to flash the Rom and the process didn't go well.. Now on the bootmanager (colored screen) is not written serial or usb in the bottom and my PC doesn't recognise it in this mode, but zune recognise it when it's Turned on. How can I solve that problem?
P.S. I had another problem, my device rebooted automatically sometimes.. And it show me a message "Storage card did non work"
Thank you
Franci4396
Were you trying to flash a custom ROM? There's a very clear warning on the RSPL program not to use it on bootloader (SPL) versions 4 or greater. It sounds like you had version 4, based ont eh error you report...
The best way that I know of to fix the problem is GoldCard, though installing an official update CAB that includes a new bootloader (basically, any HTC firmware CAB for your phone) has been reported to work too.
The "storage card" error sounds like there's a problem with the internal microSD that the HD7 uses to store data. They come loose sometimes. You can replace that card, but getting to it without voiding your phone's warranty is difficult. If you're already out of warranty, though, it's not too hard if you have a set of small screwdrivers.
Can you give me a goldcard cab site??
For either GoldCard or a suitable update CAB (they are *not* the same thing), search the dev&hacking sub-forum. You'll need an OEM CAB that is for your phone and newer than your current firmware, if you want to go that route. Note, however, that it will lock your bootloader down even more. You can't flash right now anyhow, so unless you just want to flash a stock ROM I wouldn't bother fixing the bootloader that way.