If any one has a better solution, PLEASE post!!!!
Updated version of the file for the people who thought the old file was too loud. in the new file below i have 3 versions. low volume, medium, and loud. hope this solves everyones problems. tell me if it has worked and what u think.
I was having trouble hearing people when i was in a noisy area. i thought it was my service and tried my other phone and found out that it was my new diamond 2
INSTRUCTIONS.
FOR THE NEW FILE ALL YOU HAVE TO DO IS GO TO WHICH EVER FILE YOU PREFER (MEDIUM, LOUD) FOLDER LOW IS EMPTY SO DON'T WORRY ABOUT THAT. TAKE THE AUDIOPARA3 FROM THE FOLDER AND COPY IT IN THE WINDOWS FOLDER. CHECK BELOW FOR MORE INSTRUCTIONS
I found this cab below. to install all u need to do is
1st find ur original audiopara3 file in \Windows folder and make a backup( copy it to ur sd card or somthing
2ndextract the cab (u can do it on ur computer using winzip and coping it to ur phone or u can do it on ur phone
3rd u have to put it in the \windows folder
4th if u use windows file explorer u need to change the name from (copy of Audiopara3 to Audiopara3)
now restart ur phone and test it.
ur volume should be really loud now!!!
adjust the volume to ur liking
it worked for me
If there is any problems please tell me
I would like to raise the volume a bit but not that high.
Can you create a light sound boost cab?
Or maybe you can describe how you hacked audiopara so we can adjust it to our needs
Tnx
i didnt make that cab so i dont know how to make u another one.
u still can adjust the volume with the volume key to ur taste
Thanx, that really boosts the sound
glad that it worked
its working but its working too loud,
when loudest volume set in music or ringtone it feels like speaker gonna break... and also quality is bad and there's distortion in highest volume.
possible to make it quieter?
bnm7bnm said:
its working but its working too loud,
when loudest volume set in music or ringtone it feels like speaker gonna break... and also quality is bad and there's distortion in highest volume.
possible to make it quieter?
Click to expand...
Click to collapse
yes, I agree. it's much louder, but it also gives much distortion in the upper volumes...
I have to agree also. I can sometimes hear echoes during phone call.
May I ask one question-Why you guys are talking about earpiece volume? For me it's loud at 60-70%. Don't even have to increase to full volume. Sorry if I said anything wrong.
May I ask one question-Why you guys are talking about earpiece volume? For me it's loud at 60-70%. Don't even have to increase to full volume. Sorry if I said anything wrong.
I usually work in noisy environs and can't hear it well
The factory levels are set loud enough. So much so, that my speakerphone is actually distorted at full volume. You can change volume tables, but at the expense of quality. Either boost the treble with minimal distortion or boost the mids with a lot of distortion. I wouldn't mes with them unless you want a blown voice coil.
can someone explain how to edit this file? what you changed?
thanx.
Just open them using Notepad++ or even Excel to see what's different from the default file on your device.
mccune said:
Just open them using Notepad++ or even Excel to see what's different from the default file on your device.
Click to expand...
Click to collapse
i know i meant what values should be changed? what value do change?
Sorry about that. Misunderstood.
I've compared a few AudioPara files. But there are to many differences between them to tell how you can optimize this yourself
the idea is if we could change the file so the loudness could be between the original and modded one it would be perfect, cause now if i set it above middle there is distortions...
Agreed, I will do some testing when I find the time. Will try to lower some values here and there...
hope the new file helps
You've attached a RAR file with CAB extension.
File contains three folders:
loudest+distortion > AudioPara3.csv
low > empty
mide > AudioPara3.csv
Could be unclear to users what they have to do with the files since it's different from the instructions in the first post.
Related
J dont think that it is posted here,so from Diamond forum the file below makes Raphael sounds louder.Test it to mine & works, BUT it's a little disorted (with .wav files j use) ,maybe someone with enough knowledge fix it.
Media player now its loud, havent test it in incoming ringtones or bluetooth.
It doesnt sound well when SRSWOW is on.
The problem is that there is not enough power available from the audio amplifier. This can't be corrected with software.
What this .cab does is probably that it tries to increase the amplification beoynd the capabilities of the device. This may make the sound seem louder, but as you have noticed, it also increases distortion. There is no workaround for the laws of physics...
So we are really really stuck with a very inferior product.
I installed SRSWOW but lost all sounds
illi said:
So we are really really stuck with a very inferior product.
I installed SRSWOW but lost all sounds
Click to expand...
Click to collapse
Did you change the dll file in the registry so that if points at the right one? Its been written a couple of times the the SRSWOW cab going about set the wrong values in the reg. So I think this should be an easy fix if you do a bit of searching. Try the Daimond forums.
Either this problem varies from device to device, or then Ijust dont understand how loud you guys need...
When my wife calls, she shouts so loud I even have to tone done volume
@WizP: I'll do a search for the fix.
@Taajuus: The sound must be decent enough....
Taajuus said:
Either this problem varies from device to device, or then Ijust dont understand how loud you guys need...
When my wife calls, she shouts so loud I even have to tone done volume
Click to expand...
Click to collapse
I have my volume set to the halfway mark. I'm talking about the conversation volume, only settable while in a call, not the system or ringer volumes.
Those that are reporting low volume, is it the ringer, system, or call volume you are complaining about? In other words, is it the front or the rear speaker that's producing low volume?
The ring volume is more than fine, it's just the speaker volume when in a call, when outsuide you can hardly hear it
Yes, I concur.
I've got my in call volume at maximum and you can still barely hear the other person.
Before you ask, I don't have a screen protector covering the earpiece.
I still wonder - I havent had any problems with incall voice. Can hear person very clearly even outside in traffic noise.
Could this really be single device problem, or maybe operator dependant?
With that audiopara file in my raphael (ROMeOS V.1.05) the speakerphone volume is now hugh,the music playback is loud, but a little disorted, but j think that there was no serious change in incoming ringtones (though j use only wav files-that are much louder from mp3's.
As far as the disortion a new modified audiopara file that suits well with Raphael should make the difference.
J will try some mods with SRSWOW..
Worked here... But the sound is VERY distorted..
Couldn't find a way around it with SRS (Tried treble reducer) and no luck.
I can´t even here when I´m talking to somebody, but I still have that plastic over the earpiece but still! There´s NO sound at all through it (well really really low), I have max volume, will it get better with the screenprotecter that doesn´t block the small speaker?
Mr.Sir said:
I can´t even here when I´m talking to somebody, but I still have that plastic over the earpiece but still! There´s NO sound at all through it (well really really low), I have max volume, will it get better with the screenprotecter that doesn´t block the small speaker?
Click to expand...
Click to collapse
REMOVE THAT. It's the same thing if I tried to yell to you with a wall in between us. Sound has difficulty traveling through a medium, specially a piece of plastic.
Dear Taajuus,
Could this really be single device problem
Click to expand...
Click to collapse
Well... yes sit can because:
1. There are several related problems that are not seen in all devices.
2. Not all Raphaels [Touch Pro] are the same model, make or version.
or maybe operator dependant
Click to expand...
Click to collapse
It can never be related to the operator because:
1. The operator's interaction with the device is the one of a comm carrier.
2. It's only possible influence would be with/thorough the radio, never the ROM.
3. The operator cannot directly interact with the hardware.
Cheers.
xenkato said:
J dont think that it is posted here,so from Diamond forum the file below makes Raphael sounds louder.Test it to mine & works, BUT it's a little disorted (with .wav files j use) ,maybe someone with enough knowledge fix it.
Media player now its loud, havent test it in incoming ringtones or bluetooth.
It doesnt sound well when SRSWOW is on.
Click to expand...
Click to collapse
how do you install this?
The sound is distored cause tripp modified the values of the gain but put it too high. If some one could put lower values it would be great. I tried but didn't manage . I also tried to put the values of the HTC NIKE but it resulted in a lower sound that the original one.
How to install audiopara (to 'ekerbuddyeker")
Get in /Windows,search for audiopara3.csv, MAKE A BACKUP, use resco exp. and copy the new audiopara to /Windows, soft reset and done.
xenkato said:
Get in /Windows,search for audiopara3.csv, MAKE A BACKUP, use resco exp. and copy the new audiopara to /Windows, soft reset and done.
Click to expand...
Click to collapse
Ah, so that's how you install it ololol better write this on the first post...
Well for me this file really fixed the sound of my device, specially the earspeaker!! Now I have to lower the system sound so I don't get deft
I recommend everyone to use it...
So do u actually mean that this cab file has increased the volume on a call or just the general sound???
I recently acquired a HTC Touch Pro and the major problem I have is when making calls the volume is too loud. Even when I have the volume set to the lowest possible level, it's still too loud. Is there any way (maybe via registry hack?) that you can reduce the call volume even lower?
Holy ****, MOST people have the opposit problem, it is WAY too low even at highest volume, but you are maybe using headset/speakerphone?
Maybe we should ask the OP to upload his audiopara files It would solve a lot of users problem (mine also)
May be this device came with a new rom which is not yet available for download at HTC site.
What is your device rom version?
Regards
Yes, maybe the htc support guys were annoyed by the too many complaints about the call volume, so they raised the volume in the new rom to an irrational level?
OP: Is your ear speaker distorting during a phone call?
No not using speaker phone or anything like that. Speaker does NOT distort, its just too loud for me, even at the softest volume (1 bar), it's still too loud. I have sensitive ears. On every phone I use, I always have to have the volume to the lowest which isn't usually a problem as its manageable. It's just that with this phone after I make a call (even if its a brief one) my ear will go slightly deaf for a few minutes after, because its so loud. It's annoying, especially when the primary function of the phone is to make calls.
At the moment, I'm using ROMEOS 1.12 and radio rom 1.02.25.28 and protocol version 52.33.25.17U.
can u share with us the audiopara files? or the settings from ur registry? or something that can help other like me with the low sound?
i belive tht the entire forum here will be greateful for ever... and maybe the developers will work aroud with that files for us, poor people with nonsensitive ears...
I found this one audiopara3.csv file. It 's Tripp 's light boost. Works fine for me. You should unzip and copy it in \windows folder replacing the existing one.
Keep a backup of your original file just in case...
All credits goes to Tripp.
freco said:
I found this one audiopara3.csv file. It 's Tripp 's light boost. Works fine for me. You should unzip and copy it in \windows folder replacing the existing one.
Keep a backup of your original file just in case...
All credits goes to Tripp.
Click to expand...
Click to collapse
Anyone tryed these allready?
Can people chime in on this. I really want tio buy the Pro but from what I have read the phone suffers from the volume problem that all of the HTC phones suffer from. Has anyone found a way to up the volume on the earpiece and speakerphone. How well does the workaround work. All everyone is saying is try this without providing results and effectiveness
This is critical to me as I want ot purchase this phone immediately, but the volume issue, especially on the speakerphone, really is holding me up
Please help
ty, freco, but i have tried all audiopara published on this forum... still not satisfied....
i've copied it to /windows, but i think it wasnt there at all :S total commander did not say do you want to overwrite or something :S
freco said:
I found this one audiopara3.csv file. It 's Tripp 's light boost. Works fine for me. You should unzip and copy it in \windows folder replacing the existing one.
Keep a backup of your original file just in case...
All credits goes to Tripp.
Click to expand...
Click to collapse
yes it's work in my TP there is significant increasing volume hope not break my speaker
Hello i got my PPC from 2 days. Its a copy of HTC 3G T3232 , but when im making a call i hear the other guy low. I meen the volume is low. And the other thing is that he can hear hes voice too but with some delay. I think this isnt normal and now i want to find if its from the phone. And are there any tips for increasing the volume of the call? I think there should be some regg tweak's for this, and for the other problem im not so sure. So can anybody give me a hint and a good regg editor or tell me how to edit them. After all im new to win mobile and this isnt like a standart windows run>regedit
Welcome to the forum
Do a search for an app called SRS Wow it increases the general volume
Good luck,
ADJUSTING/INCREASING RING VOLUME
1. Advanced - Registry Edits
a. Get out your favourite registry editor.
b. Navigate to HKCU\ControlPanel\SoundCategories\Ring
c. Change InitVol DWORD to 5 or higher. THIS ONLY INCREASES RINGTONE VOLUME
Alternatively if you want to increase the INCALL volume you just need to do the following:
b. Navigate to HKCU\ControlPanel\SoundCategories\InCall
c. Change InitVol DWORD to 5 or higher.
WARNING: Don't change anything you aren't sure about.. if you really want to change it then BACK IT UP FIRST! >_<
2. Use the SRSWOW Driver.
Install the SRSWOW_HD Driver for your PDA and increase sliders until you're content. (usually 3D and Focus increase the volume). BTW i attached the SRSWOW_HD Driver..
PS: I take no responsibility for any damage you do to your device.
PPS: If you have any further questions about this or the Atom Life.. PM me.
Cuz of SRS wow i have done a hard reset, cuz of the program my tuch screen wasnt working. Btw some1 know something about the echo, i meen when i talk with other ppl they can hear their voiceses too..
I have been trying to boost my volume on htc fuze with my headset, but for some reason they was real loud and all of a sudden they not loud no more. I tried to use audio booster but it still not loud at all. Is there an app. or software I can download for higher volume.
also looking for same, after NRGZ28 removed the custom audio boost options, i would really like to get it back.
can't find the magic cab to get it back
Yea when cooking, there are 3 levels. High is horrible and gets scratchy. I find the medium is best but I think it also boosts my microphones sensitivity as well (have had complaints).
Sounds good though.
The package only contains 1 file, which you may be able to just copy over into Windows. There isn't any registry files. I've attached my package so you can test. Just copy the file over into \Windows\
how do you COPY over to windows?
use total commander to copy to windows (make sure to make a copy of the original audio para3.cvs) in case you want to revert the changes
As we all know the volumes on the XZ1C are very low especially the loudspeaker , feels bad when your are on Call or Music with loudspeaker and when the Mic sensitivity is low when the phone is not near the mouth.
I have done some changes in Mixer_Path.xml which helped to increase volumes.
Hope that helps Z1C owners who need only some boost in sounds rather than third party custom sound mods.
Device must be on stock KK rooted and this also may work on XZ1
INSTRUCTIONS:
PLACE THE MIXER_PATHS.XML FILE IN SYSTEM/ETC DIRECTORY WITH 0644(RW-R--R--) PERMISSIONS AND REBOOT
Hit Thanks if you liked it
I'm on lasted Stock KK,Rooted + Odex, but i cannot flash this mod via TWRP.
sinosuke said:
I'm on lasted Stock KK,Rooted + Odex, but i cannot flash this mod via TWRP.
Click to expand...
Click to collapse
Whats the error ? anyways you can place the mixer_path.xml file in system/etc directory with 0644(rw-r--r--) permissions and reboot
This just flash with recovery?
imr.uvce said:
Whats the error ? anyways you can place the mixer_path.xml file in system/etc directory with 0644(rw-r--r--) permissions and reboot
Click to expand...
Click to collapse
Okay,will try
thanks
this is what i need,
thanks a lot,
just copy the xml, set the permission, reboot, and voila
the z1c volume is amplified
:good: :good:
Hi! Would you care to prepare one XML without the loudspeaker's modification? It's distorted on 60% already.
The headphones's volume is much better though, thanks!
myrddral said:
Hi! Would you care to prepare one XML without the loudspeaker's modification? It's distorted on 60% already.
The headphones's volume is much better though, thanks!
Click to expand...
Click to collapse
Speaker section in that XML is what impacts the call loudspeaker and music loudspeaker together.
Let know what you want !!
I tried to go through the xml but I can't find the speaker section to change the values.
All I need is what I said earlier: stock loudspeaker volume, because it is distorted around 60% volume already. Thanks!
myrddral said:
I tried to go through the xml but I can't find the speaker section to change the values.
All I need is what I said earlier: stock loudspeaker volume, because it is distorted around 60% volume already. Thanks!
Click to expand...
Click to collapse
If you want stock, use the stock file in OP .
Noo, I need something inbetween
The headphones are loud enough now, and I like it. I'd want the loudspeaker on stock volumes as it gets distorted. Help is much appreciated
myrddral said:
Noo, I need something inbetween
The headphones are loud enough now, and I like it. I'd want the loudspeaker on stock volumes as it gets distorted. Help is much appreciated
Click to expand...
Click to collapse
check this file ,speaker is reduced a bit.
Better, thanks very much!
Thanks for this, this phone is now perfect, headphone volume is spot on, I don't know if the speaker is a bit to loud though, on full volume the phone is vibrating with the sound and u can actually feel the air being blown out of the speaker grill! In the 2nd file u posted above is the headset volume still the same and just speaker a bit lower?
kxf41 said:
Thanks for this, this phone is now perfect, headphone volume is spot on, I don't know if the speaker is a bit to loud though, on full volume the phone is vibrating with the sound and u can actually feel the air being blown out of the speaker grill! In the 2nd file u posted above is the headset volume still the same and just speaker a bit lower?
Click to expand...
Click to collapse
Yes !! Check the OP updated with even better headset sound,MIC gain and descent loud speaker
imr.uvce said:
Yes !! Check the OP updated with even better headset sound,MIC gain and descent loud speaker
Click to expand...
Click to collapse
great! is the headset a little louder? i felt it could handle a bit more
am new user on android
can you tell me steps to do that
and how can i do 0644(rw-r--r--) permissions