I always get an error saying E:/ cannot open file /cache/update.zip (bad), no matter what ROM it is. theres not even an update.zip anywhere on my phone or sd card, and i cant manage to get to this so called /cache. please help.
Mrblackroot said:
I always get an error saying E:/ cannot open file /cache/update.zip (bad), no matter what ROM it is. theres not even an update.zip anywhere on my phone or sd card, and i cant manage to get to this so called /cache. please help.
Click to expand...
Click to collapse
Since this isn't development related, you should post it in the general board.
You didn't install clockwork correctly, or you didn't follow all of the directions when you did install it. Did you follow the instructions and press "flash clockworkmod recovery", which downloads the latest version and puts the update file on your phone?
i did, i have the latest recovery version. and i uninstalled and then reinstalled it before trying again.
Wrong section and you have to use the option that says choose zip from sdcard not the one that says install update.zip
Sent from my GT-I9000 using XDA App
Mrblackroot said:
I always get an error saying E:/ cannot open file /cache/update.zip (bad), no matter what ROM it is. theres not even an update.zip anywhere on my phone or sd card, and i cant manage to get to this so called /cache. please help.
Click to expand...
Click to collapse
If there is no update.zip then in Rom Manager you need to select the first option that reads Flash ClockworkMod Recovery. That will bring up a screen asking which phone. If you are installing an i9000 rom choose i9000. If not choose the Captivate. That will install an update.zip on your sd card
Then select install rom from sd card and it will probably take you to stock recovery so select install packages (or whatever the 2nd choice is). That will get you into CWM. Install whatever rom from there
First off, this is the right section, as this thread is *somewhat* development related.
I had a similar problem a while back, and never did figure out exactly what was causing it. Might have been because I often just use the Clockwork update.zip (bootstrapped from stock recovery) to flash ROMs without always "installing" it from Android itself. Though, even when I got that error, I could still flash new ROMs without problems.
Either way, flash to stock w/ oneclick, then do a master clear, fixes the problem right up.
If there is no update.zip then in Rom Manager you need to select the first option that reads Flash ClockworkMod Recovery. That will bring up a screen asking which phone. If you are installing an i9000 rom choose i9000. If not choose the Captivate. That will install an update.zip on your sd card
Then select install rom from sd card and it will probably take you to stock recovery so select install packages (or whatever the 2nd choice is). That will get you into CWM. Install whatever rom from there
Click to expand...
Click to collapse
Thanks a lot, this worked. is there anyway i can just move this thread to the general forum, or would that require a moderator?
Shammyh said:
First off, this is the right section, as this thread is *somewhat* development related.
I had a similar problem a while back, and never did figure out exactly what was causing it. Might have been because I often just use the Clockwork update.zip (bootstrapped from stock recovery) to flash ROMs without always "installing" it from Android itself. Though, even when I got that error, I could still flash new ROMs without problems.
Either way, flash to stock w/ oneclick, then do a master clear, fixes the problem right up.
Click to expand...
Click to collapse
Mmmm.. last time I checked the development forums was for developers to start topics on things they have developed or are working on... not for Q & A. There's another board for that..
I get this error all the time.
Open ROM Manager, hit Menu, hit Clear Download Cache.
Then hit Flash Clockwork Mod Recovery, choose Captivate, and let it go. Then hit Reboot Into Recovery and it should work fine. You may have to select Reinstall Packages if you end up in the stock 2e recovery.
Well I have spend the last 8 hours trying to get my MIUI nexus one to stock roms. I have not been able to download a Stock ROM that is not corrupt. I have tried the following and they are all corrupt.
1. Link in the Download the flashable version of FRG33 HERE line.
http://forum.androidspin.com/showthread.php/4736-GUIDE-Reset-your-Google-Nexus-One-back-to-Stock?
2. https://rapidshare.com/#!download|4...|80958|R~052AFB941A9916E13B09E12EF4E05D1C|0|0
3. http://loadbalancing.modaco.com/download.php?url=mf/?oz11nmzyqm3
and a number of others ones. When I click on them they all say
windows cannot open the folder the compressed zip folder is invalid.
On my phone is
ClockworkMod Recovery v3.0.0.5
HBOOT 0.35.0017
RADIO-5.08.00.04
MICROP-0b15
NEXUSONE PVT SHIP S-ON
I am confused by the different threads that I have read on how I should be doing this. Some threads seem to say I put the image on the microSD card and reboot with power/vol-down others seem to say to use the Android SDK software on windows and install the new image from the windows computer.
I am not clear if the phone should be rooted or unrooted. I have installed z4zoot and I can both root and unroot.
So I think I need something more than being directed to another forum thread. I have read and following about 5 of them and gotten no more.
I have PayPal and would even be willing to give a small gratuity if someone could help me move my two nexus one to stock. one has Cyanmod and the other one MiUI.
I have my Skype on and you can text me at bobmutchseo or [email protected]
LOL, 30 views no one saw this. Cant believe I spend 6 hours trying to figure this out.
"Make sure you do not let your browser unpack the .zip file when you download it, the signature will fail, it's a sig of the zip file package itself, not a checksum on the contents of the zip file."
oh well I guess I was wrong again.
-- Installing: /sdcard/PASSIMG.zip
Finding update package...
Opening update package...
E:Cant open /sdcard/PASSIMG.zip
(bad)
Installation aborted
bobmutch2 said:
Well I have spend the last 8 hours trying to get my MIUI nexus one to stock roms. I have not been able to download a Stock ROM that is not corrupt. I have tried the following and they are all corrupt.
1. Link in the Download the flashable version of FRG33 HERE line.
http://forum.androidspin.com/showthread.php/4736-GUIDE-Reset-your-Google-Nexus-One-back-to-Stock?
2. https://rapidshare.com/#!download|4...|80958|R~052AFB941A9916E13B09E12EF4E05D1C|0|0
3. http://loadbalancing.modaco.com/download.php?url=mf/?oz11nmzyqm3
and a number of others ones. When I click on them they all say
windows cannot open the folder the compressed zip folder is invalid.
On my phone is
ClockworkMod Recovery v3.0.0.5
HBOOT 0.35.0017
RADIO-5.08.00.04
MICROP-0b15
NEXUSONE PVT SHIP S-ON
I am confused by the different threads that I have read on how I should be doing this. Some threads seem to say I put the image on the microSD card and reboot with power/vol-down others seem to say to use the Android SDK software on windows and install the new image from the windows computer.
I am not clear if the phone should be rooted or unrooted. I have installed z4zoot and I can both root and unroot.
So I think I need something more than being directed to another forum thread. I have read and following about 5 of them and gotten no more.
I have PayPal and would even be willing to give a small gratuity if someone could help me move my two nexus one to stock. one has Cyanmod and the other one MiUI.
I have my Skype on and you can text me at bobmutchseo or [email protected]
Click to expand...
Click to collapse
When you said you open the zip and it said invalid, try using a different browser to download it from, I had a same problem like you, some browsers download the file but it becomes corrupt, thats why you get "update fail" cause the zip
Sent from my HTC Wildfire S using xda premium
Solved: stuck at "Firmware upgrade encountered an issue. Please select recovery mode
So you are stuck on the dreaded " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" screen and there is nothing you can do to get your phone to start normally or even get to the download screen?
Fret not lads & ladies, I've already gone thru the pain and suffering and have come out new man, and I'll tell you how I did it. Also im starting all the way at linux/mac so everyones included.
First things first, you are going to have to get your computer ready with the right software for it to work.
You will need to make sure you get an original stock rom, make sure your source forwhere you download it is credible, this was my first mistake and why evidently I got myself into this mess.
I'm sure other roms might work that are modified for your device, but I suggest stock, and starting fresh just to make sure everything is up and running.
I am not responsible for your device, it may get bricked if done wrong.
Linux & Mac users first.
1. You will need to downloadable a program called Hiemdall, its a program similar to Odin3 (windows program).
2. You will need to extract the stock rom you downloaded earlier, I suggest to a folder in your desktop, wd will call it "folder1".
3. Now open up Hiemdall in root, (sudo Hiemdall-frontend for terminal) and then make sure device is on and stuck on the " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" screen, plug it in, then press the utilities tab and detect. ($ Heimdall detect)(terminal users). Make sure you do all this fast because the tablets are kinda funny when they stay connected.
4. Now clickthe Utilities tab then the "save as..." button and save the destination for the .pit file in the same location as the extracted stock rom folder (folder1).
5. Next click the Flash tab, and click browse and locate your .pit file, the one you just downloaded. Next click add under Partition (files), and then change the partion name (On the left hand under patition details) to recovery and browse to the extracted folder (folder1) and click and add the recovery.img and press start.
Now if all went well your tablet will have restarted itself and you have seen the logo (Samsung). but the chances are it wont load past that screen, but thats ok because now you can get your device into download mode and re-flash the whole rom. Do this the same way you did the recovery.img, but make sure you add each new one to the correct name in the partitions details section.
Now if this didnt work, then dont worry you can still join the windows crew and do it hat way. Simple download a program called virtualbox and get a windows xp iso, thats up to you to figure out as I deal with open source only O.S
So aftr you do that just load up the virtualbox with windows xp and follow below. I found it a bit easier as well.
Windows users....
I found this way to be pretty simple and straight forward,
1. Download Odin 1.3 (1.85 wasn't working for me)
2. Download the clockworkrecoveryMod
3. Open up Odin and browse in the PDA section for the CWM you downloaded and add it, next plug in your device and the box should turn yellow on the top left.
4. Press start and let it finish and reboot your device and you should now be able to boot into CWM and re flash a rom, or if you were smart just restore from a previous backup and get all the apps and stuff back too.
I dont know why cwm worked but it did so no complaints, just make sure you go into cwm and backup your device and with titanium (google play app) before you start playing with the root.
I did this and it worked for me, so hopefully it did for you. Im sorry if it didnt but dont get down, j6st be patient and ask and someone will help.
The key is getting the recovery.img to flash on I believe and maybe the cwm has it built in the package, im sure someone can shed some light on it.
"Im tired, cranky and hungry, but I got my baby back, no not you hunny, my GT2...":beer:
JLloydMedia said:
So you are stuck on the dreaded " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" screen and there is nothing you can do to get your phone to start normally or even get to the download screen?
Fret not lads & ladies, I've already gone thru the pain and suffering and have come out new man, and I'll tell you how I did it. Also im starting all the way at linux/mac so everyones included.
First things first, you are going to have to get your computer ready with the right software for it to work.
You will need to make sure you get an original stock rom, make sure your source forwhere you download it is credible, this was my first mistake and why evidently I got myself into this mess.
I'm sure other roms might work that are modified for your device, but I suggest stock, and starting fresh just to make sure everything is up and running.
I am not responsible for your device, it may get bricked if done wrong.
Linux & Mac users first.
1. You will need to downloadable a program called Hiemdall, its a program similar to Odin3 (windows program).
2. You will need to extract the stock rom you downloaded earlier, I suggest to a folder in your desktop, wd will call it "folder1".
3. Now open up Hiemdall in root, (sudo Hiemdall-frontend for terminal) and then make sure device is on and stuck on the " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" screen, plug it in, then press the utilities tab and detect. ($ Heimdall detect)(terminal users). Make sure you do all this fast because the tablets are kinda funny when they stay connected.
4. Now clickthe Utilities tab then the "save as..." button and save the destination for the .pit file in the same location as the extracted stock rom folder (folder1).
5. Next click the Flash tab, and click browse and locate your .pit file, the one you just downloaded. Next click add under Partition (files), and then change the partion name (On the left hand under patition details) to recovery and browse to the extracted folder (folder1) and click and add the recovery.img and press start.
Now if all went well your tablet will have restarted itself and you have seen the logo (Samsung). but the chances are it wont load past that screen, but thats ok because now you can get your device into download mode and re-flash the whole rom. Do this the same way you did the recovery.img, but make sure you add each new one to the correct name in the partitions details section.
Now if this didnt work, then dont worry you can still join the windows crew and do it hat way. Simple download a program called virtualbox and get a windows xp iso, thats up to you to figure out as I deal with open source only O.S
So aftr you do that just load up the virtualbox with windows xp and follow below. I found it a bit easier as well.
Windows users....
I found this way to be pretty simple and straight forward,
1. Download Odin 1.3 (1.85 wasn't working for me)
2. Download the clockworkrecoveryMod
3. Open up Odin and browse in the PDA section for the CWM you downloaded and add it, next plug in your device and the box should turn yellow on the top left.
4. Press start and let it finish and reboot your device and you should now be able to boot into CWM and re flash a rom, or if you were smart just restore from a previous backup and get all the apps and stuff back too.
I dont know why cwm worked but it did so no complaints, just make sure you go into cwm and backup your device and with titanium (google play app) before you start playing with the root.
I did this and it worked for me, so hopefully it did for you. Im sorry if it didnt but dont get down, j6st be patient and ask and someone will help.
The key is getting the recovery.img to flash on I believe and maybe the cwm has it built in the package, im sure someone can shed some light on it.
"Im tired, cranky and hungry, but I got my baby back, no not you hunny, my GT2...":beer:
Click to expand...
Click to collapse
Hi. Tried your method and it worked on windows. I tried 2 different ODIN softwares before it worked. Thanks for your help and information.
can't enter download mode
thanks for the notes. i tried to update to 4.2.2 from 4.1.2. the upgrade was unsucessfull. now i did whatever u have told. now i got the recovery but i can't enter download mode. now the tab 2(p3100) is just restarting. please help me as soon as possible
JLloydMedia said:
So you are stuck on the dreaded " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" screen and there is nothing you can do to get your phone to start normally or even get to the download screen?
Fret not lads & ladies, I've already gone thru the pain and suffering and have come out new man, and I'll tell you how I did it. Also im starting all the way at linux/mac so everyones included.
First things first, you are going to have to get your computer ready with the right software for it to work.
You will need to make sure you get an original stock rom, make sure your source forwhere you download it is credible, this was my first mistake and why evidently I got myself into this mess.
I'm sure other roms might work that are modified for your device, but I suggest stock, and starting fresh just to make sure everything is up and running.
I am not responsible for your device, it may get bricked if done wrong.
Linux & Mac users first.
1. You will need to downloadable a program called Hiemdall, its a program similar to Odin3 (windows program).
2. You will need to extract the stock rom you downloaded earlier, I suggest to a folder in your desktop, wd will call it "folder1".
3. Now open up Hiemdall in root, (sudo Hiemdall-frontend for terminal) and then make sure device is on and stuck on the " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" screen, plug it in, then press the utilities tab and detect. ($ Heimdall detect)(terminal users). Make sure you do all this fast because the tablets are kinda funny when they stay connected.
4. Now clickthe Utilities tab then the "save as..." button and save the destination for the .pit file in the same location as the extracted stock rom folder (folder1).
5. Next click the Flash tab, and click browse and locate your .pit file, the one you just downloaded. Next click add under Partition (files), and then change the partion name (On the left hand under patition details) to recovery and browse to the extracted folder (folder1) and click and add the recovery.img and press start.
Now if all went well your tablet will have restarted itself and you have seen the logo (Samsung). but the chances are it wont load past that screen, but thats ok because now you can get your device into download mode and re-flash the whole rom. Do this the same way you did the recovery.img, but make sure you add each new one to the correct name in the partitions details section.
Now if this didnt work, then dont worry you can still join the windows crew and do it hat way. Simple download a program called virtualbox and get a windows xp iso, thats up to you to figure out as I deal with open source only O.S
So aftr you do that just load up the virtualbox with windows xp and follow below. I found it a bit easier as well.
Windows users....
I found this way to be pretty simple and straight forward,
1. Download Odin 1.3 (1.85 wasn't working for me)
2. Download the clockworkrecoveryMod
3. Open up Odin and browse in the PDA section for the CWM you downloaded and add it, next plug in your device and the box should turn yellow on the top left.
4. Press start and let it finish and reboot your device and you should now be able to boot into CWM and re flash a rom, or if you were smart just restore from a previous backup and get all the apps and stuff back too.
I dont know why cwm worked but it did so no complaints, just make sure you go into cwm and backup your device and with titanium (google play app) before you start playing with the root.
I did this and it worked for me, so hopefully it did for you. Im sorry if it didnt but dont get down, j6st be patient and ask and someone will help.
The key is getting the recovery.img to flash on I believe and maybe the cwm has it built in the package, im sure someone can shed some light on it.
"Im tired, cranky and hungry, but I got my baby back, no not you hunny, my GT2...":beer:
Click to expand...
Click to collapse
pls help..
I m faceting same problem on my galaxy tab 2 7.1 gtp3100..but my tab is not detecting by odin ..n tell me is
kies are necessary or not? pls help me..
shubham.butle said:
I m faceting same problem on my galaxy tab 2 7.1 gtp3100..but my tab is not detecting by odin ..n tell me is
kies are necessary or not? pls help me..
Click to expand...
Click to collapse
kies is not nesccearlly needed we need the usb drivers make sure you installed them and you are using stock samsung usb cable or else IT WON"T WORK !!!
shubham.butle said:
I m faceting same problem on my galaxy tab 2 7.1 gtp3100..but my tab is not detecting by odin ..n tell me is
kies are necessary or not? pls help me..
Click to expand...
Click to collapse
If you can reach to the CWM recovery mode: Download firmware in zip form, you can get it from the below link. if you have a zip file leave it.
After obtaining the firmware copy to your external sdcard using a card reader or any other method
In recovery mode select "Instal zip from sdcard" then select "choose zip from external sdcard" then select the copied firmware zip file from the list and wait for completion
After completion go back and select "wipe data/factory reset" and "wipe cache partition" reboot . it will take some time for reboot atleat 15min. it worked for me. hope it will work for you. good luck
http://forum.xda-developers.com/showthread.php?t=2054901
Thanx...
thanx.. @Jeevan I flashed cwm successfully..(I don't know how..!)n in ur link there are many roms ,when this problem was created my os was ICS..now tell me if I flash 4.2.2 directly..then it will create problem or not..n in 4.2.2 there are two files so which will better..thanx once again u saved me!!pls reply
shubham.butle said:
thanx.. @Jeevan I flashed cwm successfully..(I don't know how..!)n in ur link there are many roms ,when this problem was created my os was ICS..now tell me if I flash 4.2.2 directly..then it will create problem or not..n in 4.2.2 there are two files so which will better..thanx once again u saved me!!pls reply
Click to expand...
Click to collapse
You can choose any of the roms, deodexed will be better. And there won't be any problem flashing 4.2.2
You should install latest kies version
Sent from my GT-P3100 using xda premium
sukkukikku said:
You should install latest kies version
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
Thanx yr..bt today I just install stock rom 4.2.2,so no problem just tell me these stock roms are exactly original or change some thing I mean in future updates can I use normal method ie directly
update from tab?
---------- Post added at 02:05 AM ---------- Previous post was at 02:01 AM ----------
shubham.butle said:
Thanx yr..bt today I just install stock rom 4.2.2,so no problem just tell me these stock roms are exactly original or change some thing I mean in future updates can I use normal method ie directly
update from tab?
Click to expand...
Click to collapse
I update rom by cwm..
would you like to give me clear solution? i have same problem here with P3100, already tried many CWM but none of them fixed it, flashing directly through odin with this file (DBT-P3100XWDMI1-20140113101559) and still no luck. Any link to download correct CWM please... Thanks
Awesome post
Dears
please follow blindly in this post,
because i have tried to install , 4.2.2 Bg to my samsung tab 2, got error firmware upgrade issue, and now i followed the steps here. got installed on 4..2.2
who would required , please go for XDA instruction
realy awesome, life saver, :good:
ragujay said:
Dears
please follow blindly in this post,
because i have tried to install , 4.2.2 Bg to my samsung tab 2, got error firmware upgrade issue, and now i followed the steps here. got installed on 4..2.2
who would required , please go for XDA instruction
realy awesome, life saver, :good:
Click to expand...
Click to collapse
Hi! Do you still having the CWM and Odin 1.3?
Hi.. I was experiencing this problem. Then without even thinking deeply, I try google any solution regarding this matter without referring to this thread first. I found this guys solution as he said it is for all samsung model.
https://www.youtube.com/watch?v=Jfgq6bYfKLg
After done flashing, my tab giving a samsung logo and went off until now. I was unable to enter the recovery and download mode. I try to connect the tab with PC but it kept reconnecting repetitively although universal samsung usb driver has been installed. Any idea how to solve this?
I have a sg2 plus GT-1905 (without the p version) ...I have installed the latest Clockworkmod recovery v6.0.3.1 ..Iv been trying to update from 4.1.2 to 4.2.2 but without succes cuz when i try to install zip from sdcard it says :
E:Cant open /sdcard/I9105XXUBMH4_I91050XEBMH3_SER (1) - copy.zip (bad)
installation aborted.
Iv seen the other forums with the same problem and tried:
toggle on off signature verification
wipped data factory reset
formated my 2gb external sd card to fat32
redownloaded the zip file again
trying to install from internal and external but non of that worked and gave me the (bad) error .
AlGeri said:
I have a sg2 plus GT-1905 (without the p version) ...I have installed the latest Clockworkmod recovery v6.0.3.1 ..Iv been trying to update from 4.1.2 to 4.2.2 but without succes cuz when i try to install zip from sdcard it says :
E:Cant open /sdcard/I9105XXUBMH4_I91050XEBMH3_SER (1) - copy.zip (bad)
installation aborted.
Iv seen the other forums with the same problem and tried:
toggle on off signature verification
wipped data factory reset
formated my 2gb external sd card to fat32
redownloaded the zip file again
trying to install from internal and external but non of that worked and gave me the (bad) error .
Click to expand...
Click to collapse
are you kidding me?
i really wanna know why can't people read before asking?
you don't need clockworkmod to flash 4.2.2
and you can't, if it actually started, you'll actually brick it
do your own searching job in the whole s2 plus forum
there are so many complete guides around the whole forum and nobody reads and keep asking questions which answers have been provided already.
just as @KINGbabasula said
"if everyone is 'just asking', then the whole forum will be filled with useless and meaningless questions"
Ok first of all you dont need to be such nervous about it -.- ... Im a newbie and dont understand very well the process . Can you please post a link of it it will be appriciated . I will delete the post then evetybody will live in peace
AlGeri said:
I have a sg2 plus GT-1905 (without the p version) ...I have installed the latest Clockworkmod recovery v6.0.3.1 ..Iv been trying to update from 4.1.2 to 4.2.2 but without succes cuz when i try to install zip from sdcard it says :
E:Cant open /sdcard/I9105XXUBMH4_I91050XEBMH3_SER (1) - copy.zip (bad)
installation aborted.
Iv seen the other forums with the same problem and tried:
toggle on off signature verification
wipped data factory reset
formated my 2gb external sd card to fat32
redownloaded the zip file again
trying to install from internal and external but non of that worked and gave me the (bad) error .
Click to expand...
Click to collapse
You know that search button on xda? Use it
Sent from my GT-I9105P using xda app-developers app
safariking said:
You know that search button on xda? Use it
Sent from my GT-I9105P using xda app-developers app
Click to expand...
Click to collapse
exactly
AlGeri said:
I have a sg2 plus GT-1905 (without the p version) ...I have installed the latest Clockworkmod recovery v6.0.3.1 ..Iv been trying to update from 4.1.2 to 4.2.2 but without succes cuz when i try to install zip from sdcard it says :
E:Cant open /sdcard/I9105XXUBMH4_I91050XEBMH3_SER (1) - copy.zip (bad)
installation aborted.
Iv seen the other forums with the same problem and tried:
toggle on off signature verification
wipped data factory reset
formated my 2gb external sd card to fat32
redownloaded the zip file again
trying to install from internal and external but non of that worked and gave me the (bad) error .
Click to expand...
Click to collapse
erm,you have the wrong concept:
first of all,the method you use is for custom rom or any modded rom with zip file.
but what u have there is official firmware,which meant for flashing with odin(some sort of samsung's flashing program)
1)exact the file u downloaded until you got .tar.md5 in the end of the file name.
2)download odin 3.04
3)select ''I9105XXUBMH4_I91050XEBMH....tar.md5'' in the ''pda''
4) click ''start'' once u connected your phone in download mode(power+vol up+home button)
something like the photo i attached
Nothing happened
nickchk said:
erm,you have the wrong concept:
first of all,the method you use is for custom rom or any modded rom with zip file.
but what u have there is official firmware,which meant for flashing with odin(some sort of samsung's flashing program)
1)exact the file u downloaded until you got .tar.md5 in the end of the file name.
2)download odin 3.04
3)select ''I9105XXUBMH4_I91050XEBMH....tar.md5'' in the ''pda''
4) click ''start'' once u connected your phone in download mode(power+vol up+home button)
something like the photo i attached
Click to expand...
Click to collapse
Thanks for giving a proper answer ... Iv done that and after it finished and the "pass" was shown at odin 3.04 the phone automatically rebootet! i expetdet the newer version but instead it showed "installing new apps" after finishing nothing changed the same android version 4.1.2 (( Nothing happened after flashing :/ I dont know what im doing wrong
AlGeri said:
Thanks for giving a proper answer ... Iv done that and after it finished and the "pass" was shown at odin 3.04 the phone automatically rebootet! i expetdet the newer version but instead it showed "installing new apps" after finishing nothing changed the same android version 4.1.2 (( Nothing happened after flashing :/ I dont know what im doing wrong
Click to expand...
Click to collapse
which means you flashed the 4.1.2 again and without wiping.
which
you were not flashing 4.2.2
link?
Ok then can you please redirect me to a 4.2.2 rom ? But for gt-9105 version
AlGeri said:
Ok then can you please redirect me to a 4.2.2 rom ? But for gt-9105 version
Click to expand...
Click to collapse
Brian was right,you flash 4.1.2 again,try to separate firmware and don't get confuse. This is the link
http://live.samsung-updates.com/details/13204/Galaxy_S_2_Plus/GT-I9105/SER/I9105XXUBMH4.html
Yep you have to know what is a firmware and what is a custom rom. Or you'll risk bricking your phone in your further flashing
Sent from my GT-I9105P using XDA Premium 4 mobile app
MTk6589 galaxy s4
Please help
cannot install my file zip to my s4
install/sdcard
installation aborted
assaness said:
Please help
cannot install my file zip to my s4
install/sdcard
installation aborted
Click to expand...
Click to collapse
how many times do we have to say post these questions in your own forum
Sent from my GT-I9105P using XDA Free mobile app
AlGeri said:
I have a sg2 plus GT-1905 (without the p version) ...I have installed the latest Clockworkmod recovery v6.0.3.1 ..Iv been trying to update from 4.1.2 to 4.2.2 but without succes cuz when i try to install zip from sdcard it says :
E:Cant open /sdcard/I9105XXUBMH4_I91050XEBMH3_SER (1) - copy.zip (bad)
installation aborted.
Iv seen the other forums with the same problem and tried:
toggle on off signature verification
wipped data factory reset
formated my 2gb external sd card to fat32
redownloaded the zip file again
trying to install from internal and external but non of that worked and gave me the (bad) error .
Click to expand...
Click to collapse
Official 4.2.2 can be installed with odin, not in cwm