Hello,
I was digging in the wiki in search of information about eten m600 model.
But i was some kind of desapointed cause i found nothing.
Does this model is known under another technical name, or simply nobody talked about it before ?
regards.
--
plonky
Sorry to start you off with this answer, but you are in the wrong forum.
The ETEN M600 is not manufactured by HTC so you won't find anything specific about it here. ETEN devices do have their own dedicated board, probably more than one, you should try there.
thank you for your answer,
i already find eten-users.net board.
Thats great.
I am used to read xda-dev cause my previous device was an orange c500.
I did the mistake to think that i would find ressource here.
Its not a probleme anyway.
thank you
Hi Guys,
This is my first post and its 1 in the morning, so please forgive me if this has been asked before
Later today, I'm wanting to place an order for the HTC Cruise. I liked the Glofiish x800, but dismissed it because of the potential buggy nature of the unit from reviews I read and of course the support forum is nowhere as good as this
So my question. Since the Cruise already comes with a cube, will I be able to use any of the Cubes created by developers on this forum, since they are much cooler. If so which ones?
Are there any other apps that will work from this site, that will add the kewl factor? For example the 'apple-esque' lock function S2U2 - will that work on the Cruise?
Sorry if this is a stupid question or has been asked before, but I'm a newbie to the Pocket PC and any advice would be greatly appreciated.
Hi Guys,
thanks for watching. DUe to some good roms of you i upgraded yesterday my qtek s200 to wm6. Now the i love the Gui of the TouchFlo 3D. How could i download and install it on my running device.
Du i need this hdsql (or whatever).
Yess i saw many rom here in the forum but none was like touchflo 3d espacially for the messaging keyboard. I want to get rid of my stylus pen. And i think this would be a good possibility.
Thanks in advance.
Cheers,
RonLion
it's can not work on prophet
Cos' ram is less
ah, ok.
But wm 6.1 prof is possible? do you know a good rom in english.
thanks. cheers,
Ronny
The forum is full of good 6.1 roms. Suggest u spend a little time reading then when u understand what u have to do, go and try some ROMS for yourself and learn
Hi
I hope experienced forum member will not be offended by my response to timmymarsh
timmymarsh recommends:
"spend a little time reading then when u understand what u have to do, go and try some ROMS for yourself and learn"
I am a noob with xda, I have spent hours reading, and trying to learn. I am still not clear how to safely update my orbit 1 to wm6.1 with touchflo.
For the non experienced (with xda) this forum is very difficult to find information.
Virtually every post / tutorial uses technical terms which presume previoius knowledge of htc / xda firmware and upgrades.
I am not IT incompetent.
There are a number of iPhone forums which have very straightforward forums which guide the reasonably competent computer user to unlock iphone, upgrade firmware and software.
Is there a straightforward tutorial available in xda-developers to help me upgrade to wm6.1 with touchflo?
Thanks colink
colink said:
Hi
For the non experienced (with xda) this forum is very difficult to find information.
...
Is there a straightforward tutorial available in xda-developers to help me upgrade to wm6.1 with touchflo?
Thanks colink
Click to expand...
Click to collapse
Firts, I would like to ensure you that I am not flaming or anything like that.
But, I have to Agree with Colink, this is not a noobfriendly forum
I´ve just bought a S200 from a friend (I´ve been dreaming with it since 2006!) and was a very pleasent surprise to know that Prophet could run WM 6.1 (I like Touchflo 3d, but for me, is not necessary.)
So, just as Colink (I supose), I´ve spent the last week reading this forum...and XDA forum too. I´m very sure that everything i should (or even can) know about prophet, is here. There is no other place to search...
But, the volume of knowledge is so huge, that sometimes is even confuse to absorb it.
So, I agree with colink and ask, Is there any tutorial to upgrade my WM version?
I´m pretty sure that I´ll upgrade it with or without tutorial... but as since as theres so many "expert" around here and, they did so much to the whole forum... wouldn´t be hard to someone write a quick tutorial.
But, I hope you all understand, that what I´m doing here, and I supose colink too, is just searching at the best (probably) only place to find anything about our ppc... not been lazy, we are just afraid of screwing something.
Thanks!
Magliano
colink said:
Hi
I hope experienced forum member will not be offended by my response to timmymarsh
timmymarsh recommends:
"spend a little time reading then when u understand what u have to do, go and try some ROMS for yourself and learn"
I am a noob with xda, I have spent hours reading, and trying to learn. I am still not clear how to safely update my orbit 1 to wm6.1 with touchflo.
For the non experienced (with xda) this forum is very difficult to find information.
Virtually every post / tutorial uses technical terms which presume previoius knowledge of htc / xda firmware and upgrades.
I am not IT incompetent.
There are a number of iPhone forums which have very straightforward forums which guide the reasonably competent computer user to unlock iphone, upgrade firmware and software.
Is there a straightforward tutorial available in xda-developers to help me upgrade to wm6.1 with touchflo?
Thanks colink
Click to expand...
Click to collapse
Colink, in response to your comments above you would have read the very good guides to upgrading such as these:
http://forum.xda-developers.com/showthread.php?t=405384 and http://forum.xda-developers.com/showthread.php?t=401326 and http://forum.xda-developers.com/showthread.php?t=353547.
When i did my first flash i started with this : http://forum.xda-developers.com/showthread.php?t=315016. I then Hardspl using the guides above. The info i read recomended this way, so i used it. You will also have read from the guides about using XP not Vista to flash and also ensuring you remove all devices from USB ports and turning off other comunication s/w. The guides also offer good info on what to do when it goes wrong. If you do flash 6.1 rom and it goes wrong, then you can revert back to 315016 thread (aku 2.2 rom) as the guides say, this wil get you device working again
This post gives you links to the guides and a list of Roms, although you should check for new ones also : http://forum.xda-developers.com/showthread.php?t=377545
The wiki is also useful : http://wiki.xda-developers.com/index.php?pagename=Prophet_Contributed_ROMs
Now i hope this is both useful to yourself and d.magliano. I know that too much info is always a head wrecker, but really the guides are very good.
Hi Timmymarsh
Thanks for the response and the guidance. I am currently reading through the links you gave.
Unfortunately in my haste, before reading your post I followed instructions for installing USPL.
I have just run start_uspl.exe on my orbit 1, after following instructions re- soft reset.
Phone is showing white screen asdescribed in tutorial
PDA ROM update utility has opened on xp laptop.
Instructed to conect via active sync.
Active sync cannot find device.
I have not touched phone and do not want to brick it.
Any guidance would be appreciated.
The phone is currently connected to the charger with white screen. I presume I will have to restart and hope for the best.
Secondly the first link you give in your reply is for 'Prophet' - do I need different instructions / aplications for Artemis / Orbit?
Thanks Colin
i'll try to help yoy
colink said:
Hi
I hope experienced forum member will not be offended by my response to timmymarsh
timmymarsh recommends:
"spend a little time reading then when u understand what u have to do, go and try some ROMS for yourself and learn"
I am a noob with xda, I have spent hours reading, and trying to learn. I am still not clear how to safely update my orbit 1 to wm6.1 with touchflo.
For the non experienced (with xda) this forum is very difficult to find information.
Virtually every post / tutorial uses technical terms which presume previoius knowledge of htc / xda firmware and upgrades.
I am not IT incompetent.
There are a number of iPhone forums which have very straightforward forums which guide the reasonably competent computer user to unlock iphone, upgrade firmware and software.
Is there a straightforward tutorial available in xda-developers to help me upgrade to wm6.1 with touchflo?
Thanks colink
Click to expand...
Click to collapse
(i'm sorry for my bad english), try this tutorial , it was good for me http://forum.pocketpcitalia.com/forum_posts.asp?TID=30766&PN=1
bye
colink said:
Secondly the first link you give in your reply is for 'Prophet' - do I need different instructions / aplications for Artemis / Orbit?
Thanks Colin
Click to expand...
Click to collapse
Colin, im not familiar with o2 branded stuff so excuse ignorance, but is the orbit not based on the touch cruise/polaris?
hi
Sorry my fault, I believe the orbit is same as artemis p3300 & touch cruise. I thought I was posting in Artemis forum.
I presume your links are not relevant to my phot?
If you can guide me about my current White screen / no connection problem I would appreciate it.
Thanks colink
colink said:
hi
Sorry my fault, I believe the orbit is same as artemis p3300 & touch cruise. I thought I was posting in Artemis forum.
I presume your links are not relevant to my phot?
If you can guide me about my current White screen / no connection problem I would appreciate it.
Thanks colink
Click to expand...
Click to collapse
Colink, i thought it was touch cruise hardware and ****, thats not good!! You are correct in thinking that you cannot use the prophet section in flashing. If i were you, id goto the polaris section and read how to recover. HardSPL and flashing is more complex for the Polaris, i am waiting for official wm6.1 rom before i try any cooked ones on there. If you are lucky you can recover your device by removing the battery for at least 30 seconds and try and restart, but i do fear you may have bricked your device as the SPL is one of two parts that help load you OS (apols if my descriptions are basic, i dont want to confuse)
Read the Polaris section and look for help, if not ask, but you may get rude reply. Sorry i cant help more, as i have not tried on my touch cruise yet. Let me know what happens, pm me if you want
hi timmymarsh
Thanks for your guidance. The Polaris is the orbit 2. My orbit1 is the Artemis. Not sure if it has same complexeties as Polaris.
I will follow your guidance and let you know.
Colink
Colink,
Ignore my pm and goto here, i hope it helps (ps make sure you post in the right place in future and if u ask for help, make it clear your device and steps taken and donot criticise those who try to help, unlike some who post)
pm me and tell me how it goes!
http://forum.xda-developers.com/showthread.php?t=308242
Yes TouchFlo 3D works on S200
Have a look there !!
http://www.youtube.com/watch?v=DWaGDTvwmmc&feature=related
TouchFlow for P3400
Anyone having TouchFlow 3D for HTC P3400
Touchflo 3D on Asus P750
Whether TouchFlo 3D will work on Asus P750 ?
Bobyciline said:
Have a look there !!
http://www.youtube.com/watch?v=DWaGDTvwmmc&feature=related
Click to expand...
Click to collapse
Dude, this is not touchflo3D!! google it and you'll see. that is basic touchflo with htc cube and htc home.
sriyankar said:
Anyone having TouchFlow 3D for HTC P3400
Click to expand...
Click to collapse
Erm which forum are you in?
micrographics said:
Whether TouchFlo 3D will work on Asus P750 ?
Click to expand...
Click to collapse
wtf, this is prophet forum?
Hello,
I'm new here, and I have a lot of questions.
I have a Sony Ericsson K810i right now, and I want to buy the HP iPaQ 614C.
I have downloaded the Windows Mobile 6.1 emulator images. It looks good. But now my questions.
I'm a music freak, and I love SRS WoW. Only, it seems to have a lot of trouble with WM 6.1 . And there seems to be a newer version, with a lot of effects removed. Is this the same with WM 6.0?
That's directly question 2. I have downloaded the Dutch HP Ipaq 614c image and it is a .DIO file. Any way to mount it in the Device emulator?
My fourth question. If SRS WoW is possible on WM6.1, can someone develope a Dutch WM6.1 ROM for the Ipaq 614C? It's not nessacary, but it can be nice
And now my fifth question. I think the answer is "no"... Is there any way to put a stripped WM standard version on my SE K810i, till I have the new phone?
I am still a English student, so please don't shoot me...
Thanks in Advance,
Sef
One other question:
When WM6.5 comes out, is MS gonn'a release a update for all WM6/6.1 Devices?
have you tried posting in the right section?
jayjay8585 said:
have you tried posting in the right section?
Click to expand...
Click to collapse
Excuse me, I'm new here... Can a admin put it in the right section for me?
no it should have been done by you. read the rules theres a question and answers forum for stuff like this
I moved to the correct section, from now on please post Questions in the right section (it helps you get your answer faster and us keep the site orginised)
SRS Wow HD
Try this. Should work.
Cheers
andrew-in-woking
Thank you. One problem fixed, 4 to go...
is there anyway 6to help with the other four problem
(by the way apologies for sounding sharp in the second post. i was having an off day, and since this is a HTC forum you may have issues getting results feel free to post on my forum below)
ahh jayjay, such a cute baby
what my avatar
Dear all,
I have just bought a LG GM750, shipping with WM 6.5
Can anyone tell me, which family that myphone is belong to (eg: Alpine, Magician ...)
Thanks so much and sorry for the stupid question and my bad english.
tuanbass
"layla" i think
tuanbass said:
Dear all,
I have just bought a LG GM750, shipping with WM 6.5
Can anyone tell me, which family that myphone is belong to (eg: Alpine, Magician ...)
Thanks so much and sorry for the stupid question and my bad english.
tuanbass
Click to expand...
Click to collapse
Welcome to forums
As far as I see your device is not HTC made, have a look here:
http://wiki.xda-developers.com/