Hi guis, I'm having problems with my polaris, I tried to change roms, all by Pcarvalho, and now I've flashed the original with original SPL but the problem remains..long story short, when I put it in stand by mode, it opens the selected item, that is to say, if I select messages, when I turn off stand by mode it opens messages, and so on..the same when i'm on today screen and press the red key. I tried everything, several roms, HR, antivirus but nothing changed..can anyone help me, please?
Related
I flash the my hima with the TofClock 2.01a32WWE ROM, and it works fine, and I'm very glad with it.
But now, some time I turn off my hima by pressing the power button, the screen went black, after a while, I want to light it to operate, the hima keeping black, and the hima cannot operate any more, and I tried to call my phone(hima), the hima didn't ringing. Also, SMS, MMS, all function dead. But the same time, the 2 leds, Blue and Green/Red, flash like normal.
At this time, the only way to operate hima normally was soft-reset it by press the hole with my pen.
:shock: :shock: :shock: :shock:
Is there someone experience this situation, and is there some way to solve the problem.
:idea: :idea:
ps: in the Settings --> System --> Power --> Advanced page, the 2 options can set "Turn off device if not used for" some minutes, when "turn off" time out, the same problem occurs like above, I called it Auto Turn Off
My device is Dopod 696 (Maybe Chinese mainland version of O2 XDA II).
:wink: :wink:
I also experienced similar problems, but with the 64 version.
After a while, when I tried to turn it back on, it began to act strange. First the automatic turn off backlight option was every time reset to 10 sec and then after a day or 2 I noticed that the screen was sometimes still showing some black lines. Changing the volume still gave the corresponding sounds, but nothing else seemed to work (or wasn't visible). Normal operating mode was only reinstated after a soft-reset.
I gave it a hard reset and restored a backup (using SPB). It's operating again, but it already contains the 10 sec change.
So probably have to start clean again and install everything from the beginning, but before I do I would like to make sure it will not happen again.
Appears like the Power Off option is screwed, no matter in which way I use it (button or a program).
Anyone have any thoughts on it?
zplei
yes, i have same problem on my O2 XDA ATOM
with last rom and other
I have the same problem too, the only ay to have it back is softreset
i was using spb to toggle display mode.
someone said can be solve by reegedit. but how to.
anyone found a solution..?
Hello forum members,
would you please help me have the BT HTC S710 Original ROM? I have only seen the BT HTC S620, which when I tried to flash with to rebrand, blanked my HTC S710 screen. When I turn it on, only the two green lights come on either side of the phone ear piece.
It means that a hard reset is not visible on my screen, there is no tri-colour display either.
I have tried other ROMS, and get invalid id errors and error 270. I have tried Dr Gonzo and related ROMS.
It's now three days, no phone no pim, I am lost.
Thanks for your attention.
YOSEFE.
PS. You may PM me if convenient.
Hi YOSEFE,
I have the same problem
I tried the 620 rom and just have the 2 green LED's. I cannot get a bootloader screen and attempts to flash new roms get to 3% and then I get errors.
Did you ever sort this problem out?
Paul.
Have you unlocked ur USPL in ur phone?
You tried to flash a S620 ROM to a S710???? Look in the Wiki, there is a link to the official ROMs on the ftp...
frauhottelmann said:
You tried to flash a S620 ROM to a S710???? Look in the Wiki, there is a link to the official ROMs on the ftp...
Click to expand...
Click to collapse
Yes, I'm afraid I did, by mistake, flash 620 ROM to the 710 [feels rather stupid!]
Not happy with BT’s [mobile operator] own ROM and software that went on the phone, I successfully flashed Dr. Martin Gonzo’s Windows Mobile 6.1 v1.1 and have been using it for a couple of months but when BT launched their new phone software, I decided to try it but because it won’t work with WM 6.1, I needed to then revert back to BT’s old ROM and this was the only one available that I could find [feels rather stupid again].
The screen is completely black; only green LED's on each side of the earpiece shows any sign of life.
Connecting the phone via ActiveSync shows “HTC-S620 Connected” and I am able to browse the files on the phone but not having a display on the phone, I am limited to what I can do.
I have tried running RUU_Vox_HTC_WWE_1.34.405.1_4.1.13.54_03.10.90_Ship.exe but ActiveSync connection is lost and I hear the Windows hardware removed sound shortly after the progress bar is shown.
I’m at a loss as to what to try
Paul.
Shut it down, then hold down camera button and plug in the usb cable. The boot screen should appear and you should be able to flash the normal ROM!
I cannot get the boot screen, or any screen for that matter.
I have tried taking the battery out to make sure the phone is off. Reinserting that battery then holding the camera button down and then inserting the usb lead. The keypad lights up for a few seconds then goes out. ActiveSync then connects but the screen is still black
Paul.
[Edited: Sorry duplicate post]
Sorry for replying to my own post but a quick update...
I have managed to bring the phone back to life and reinstall Dr. Martin Gonzo’s Windows Mobile 6.1 v1.1 on it again.
This is partly assumption and not particularly accurate but the original poster (YOSEFE) might find this useful.
By installing the S620 rom on the S710, not only did I make the screen go blank, I think all the keys ended up remapped and mixed up, therefore any attempt to install Gonzo’s rom ultimately ended in failure because when the phone beeped and wanted a keypress to continue, pressing the left softkey for ‘OK’ or ‘Yes’ did not work because it had been remapped to do something else.
What worked for me is that when the phone beeped during the uspl_116_jockyw.bat install, I pressed the X or C key (I can’t remember the exact one now). One of these keys must have been the ‘OK’ or ‘Yes’ key after the S620 rom muddled things up. I only know this by trial and error over the period of today.
To my glee, the backlight lit up on the display and after a bit of tinkering, I’m back in action again
I won’t be installing a rom designed for another model again!
Paul.
Bat 'n' Ball,
sorry for not returning here to see your post. I will remember the possibility of pressing "X" or "C", should I make the same mistake as before, although like you, I should never do that ever again. However, technology being what it is, who knows?
In the end BT got me sorted out.
Thanks for sharing.
Hi guis, I'm having problems with my polaris, I tried to change roms, all by Pcarvalho, and now I've flashed the original with original SPL but the problem remains..long story short, when I put it in stand by mode, it opens the selected item, that is to say, if I select messages, when I turn off stand by mode it opens messages, and so on..the same when i'm on today screen and press the red key. Sometimes I just can't turn stand by mode off at all, and I have to reset the phone..I tried everything, several roms, HR, antivirus but nothing changed..can anyone help me, please?
Hey guys, i've got a problem. First off, KforTouchPro works fine on my HTC Touch Pro, i can configure buttons fine for Morphgear, PocketGBA, SmartGear etc, it works wonderful. And as everyone that uses this app already knows, you have to switch the setting to MS IME before you launch your game emulator, or else you can't configure the keys. Well, my problem is, after i'm done playing a game, sometimes I forget to switch the setting back to default, and whenever i do a reset or shutoff my phone, it hangs at the screen right before it shows your homescreen and touchflo3d tabs.
Basically, for those that use EnergyROM, it hangs at the screen that shows you the black & blue background with the word EnergyROM 3.0 in the bottom left (or something like that, can't remember). That means you can't do anything at all, since there are no buttons etc for you to press as the home screen is not fully loaded, so basically you got a semi-bricked phone as no matter how many times i try to turn on the phone, it just hangs there, which results in me having to do a hard reset in the end.
To prevent this, you MUST restore the KforTouchPro setting back to the default setting, but sometimes ppl forget and this will cause a semi-bricked phone, which is very risky and quite dangerous.
So, is anyone else having the same problem as me?? Is there a solution to this??
And lastly, what's the difference between KforTouchPro and KforRaphael??
Hello all,
I'm hoping this can be fixed, for my fiancée's sake, as she has alot of pictures and videos of our little boys when they were born and can't be replace on her Treo 750v, unlocked via code from Voda, it's still running WM5.
It started when she was sending a text, press sent, and randomly, parts of the list of messages starting turning into blanks, around that time it popped up saying low on memory, she deleted a installer cab for facebook, and the little busy circle appeared but did nothing and crashed the phone, so she took the battery out, put it back in and now all it does is boot with the Palm logo, goes onto the Windows Mobile splash screen then blank, pressing red brings the keyboard light on and makes the key sound, but doesn't do anything, all with the blank screen. The orange light flashs for loss of signal constantly, but the red charge light doesn't come on at all, and ActiveSync doesn't pick up anything. I can boot into the bootloader screen, which behaves as it should, getting picked up by windows. I have tried itsutilsbin, but does nothing as ActiveSync isn't initiated to try and pull the files off the device. And Google has only so much information.
So I'm pleading (nicely ) is there anyway to get files off a semi-bricked Treo? I am competent playing and messing around with flashing and upgrading, and willing to try anything to get all the files off it.
Hope someone can help!
how many photos can you fit on a palm without a memory card cant to much can it. Well have you tried ringing palm and ask them if they have data recovery. there is one very very very long shot like 1% chance that it will work and do not do this if you can not find a data recovery program for the palm is hard reset it if you can then run the data recovery software. I do repeat 1%!!!!!!!!!!!!! I say ring palm see what they say.