Hi there,
I have a very strange problem for a few days now.
When starting the phone, it asks for my PIN -> phone starts, establishes connection, works fine (full signal strength)...
Now the problem:
When I hang up a call I made or I recieved, it shows on the display that my signal strength is gone and says "no service", the icon with the "!"...
But, and that is the fact, it has still signal, because I can start a new call or even can recieve one! After some time the no service icon disappears and everthing is back to normal.
When I hang up again, the problem starts again...
What could that be? And how can I change it...
For those who might not understand what I meant... I attached a video...
Just look at the topbar icon with signal strength when I did a call...
After some time signal meter comes back.
P.S.:
Tried it with another SIM card and the same problem occures!
So it is definitly a device specific problem!
PLEASE HELP!!!
Could be ROM related.
What ROM are you using?
I have seen somewhere same problem described... but not sure it was in Polaris thread...
Bodisson said:
Could be ROM related.
What ROM are you using?
I have seen somewhere same problem described... but not sure it was in Polaris thread...
Click to expand...
Click to collapse
What must I do to read out which ROM I'm using?
It's the default. There are only a few files replaced...
Ah, I found it... are you using S2U2 maybe?
It seems like lot of people using S2U2 ver 2.0x are having same or simillar problem.
I'm using 2.00 and I don't have that problem...
Bodisson said:
Ah, I found it... are you using S2U2 maybe?
It seems like lot of people using S2U2 ver 2.0x are having same or simillar problem.
I'm using 2.00 and I don't have that problem...
Click to expand...
Click to collapse
Yes, I'm using the latest build of S2U2. And as you say it, the time I first noticed the bug, could match the update point of S2U2.
Thank you. That takes me closer to a solution!
edit:
S2U2 hotfix "d" did the trick! Thanks again!
No problem, glad to help
Related
In many threads ther is mentioned that some wizard users have problem to get VoIP running through teh phone speaker. So they have it through stereospeaker and the partner will get bad echos while speaking. So I started this thread to probably solve the problem.
1. there was an idee that it is an rom problem that maybe been solved by flashing original orwell --> I did and it didn´t work either.
2. somebody think it might be an hardware problem, that "old" wizard built before week 6 2006 do not support voip through internal speaker. --> this might be, because it fits to the posting in an other thread
3. it might be an registry thing:
But who can find these settings???
Or is it an dll problem?
Everyone who wants to answer should please psot the "wizard-age" the rom and what ever might be usefull to solve the problem for everyone.
Thanks
Hi
It's good to see that you haven't given up on solving this problem, sorry but I haven't come any closer to an answer.
Just for the record: To see when your Wizard was made, check the serial number.
Mine says S/N xx604xxxxxxx, the first number shows the year, the two next the week.
mine is from wekk 44 year 2005 - and I also didn´t came further
My wizard is week 9 2006 and I still have the speakerphone problem. I have tried both mUn and MB ROMs.
muizmotani said:
My wizard is week 9 2006 and I still have the speakerphone problem. I have tried both mUn and MB ROMs.
Click to expand...
Click to collapse
Oh one piece in the puzzle that it might be an registry or dll problemn and not a hardwareproblem.
Thanks
Just wanted to mention I've tried Radio ROM 2.19, 2.25, 2.47 and 2.69 - it didn't solve the problem.
One question to you, papamopps, does the Xplore 1.1 ROM have elatepushservice.exe (java for running WiFi in standby mode), so that you have have the WiFi task bar icon (with BatteryStatus Today-Plugin)?
AsfaltSame said:
Just wanted to mention I've tried Radio ROM 2.19, 2.25, 2.47 and 2.69 - it didn't solve the problem.
One question to you, papamopps, does the Xplore 1.1 ROM have elatepushservice.exe (java for running WiFi in standby mode), so that you have have the WiFi task bar icon (with BatteryStatus Today-Plugin)?
Click to expand...
Click to collapse
The elatepushservice.exe is in windowsfolder. But I don´t know if it is running the way you want. But just pm anichillus - he will know it.
No body can help us?
Faria mentioned this:
There is a possibility but then we will loose bluetooth function.
Please - nobody knows an answer?
I am also having the problem. My serial shows week 12 of 06.
Mine is 06 42nd Week and I don't seem to have a problem.
Anyone come up with anything on this issue. I'd hate to see this thread die.
No nothing. Faria mentined that there would be a soulution but we would loose bluetooht support. Don´t know what that means but he never answerd again.
Sorry.
Hmmm...
Loosing bluetooth for voip wouldnt be a huge issue since most of us will be connected via WiFi, and wifi is a rare thing when you are driving (main reason for headset).
Whiterat said:
Loosing bluetooth for voip wouldnt be a huge issue since most of us will be connected via WiFi, and wifi is a rare thing when you are driving (main reason for headset).
Click to expand...
Click to collapse
But when you are loosing complete support for bluetooth?
Don´t know how it would be working. Will ask Faria again.
That would kind of suck to loose Bluetooth all together. Not only do I use a headset from time to time, but I also use a bluetooth gps receiver so then I would be out 2 devices.
Hi, i also have a wizard model and the sound keeps going through the stereospeaker... I would apreciate some help...
Wizard Model
WM6 Faria Kitchen
IPL/SPL 3.08
Radio 02.40.11
OS 5.2.318
There is still no solution?
This, to me, is a major show stopper for using voip on my phone
No one can help us? I got the problem, too...
Arrrrhhh
I posted on the VOIP forum when it started. Seems an age back now - and yes I have the same problem. Seems absurd that the s/w cant control where the sound goes.... but there you go.
I have tried some of these registration hacks, but no success Maybe you have more luck? http://msdn2.microsoft.com/en-us/library/aa921918.aspx
Hello,
I have Wizard + WM6 (faria) and recently I noticed that my PDA turns on without any good reason. Previously the display turned on when I received SMS or when there was an incoming call. Needless to say it drives me crazy!!!
Is there any way to investigate the issue (find a reason for this strange behavior)? Pls help.
P.S. Locking the device is not a solution.
Hikari said:
Hello,
I have Wizard + WM6 (faria) and recently I noticed that my PDA turns on without any good reason. Previously the display turned on when I received SMS or when there was an incoming call. Needless to say it drives me crazy!!!
Is there any way to investigate the issue (find a reason for this strange behavior)? Pls help.
P.S. Locking the device is not a solution.
Click to expand...
Click to collapse
i noticed that before and solved but i cant remember where is the problem exactly.
i think there is something with the connections or something like that
if it happened every short-time try to turn on flight mode, then check if it gone will be sure it is something with connection/phone
its right said:
i noticed that before and solved but i cant remember where is the problem exactly.
i think there is something with the connections or something like that
if it happened every short-time try to turn on flight mode, then check if it gone will be sure it is something with connection/phone
Click to expand...
Click to collapse
I had this problem with the 1413 build, but not since going to the new 318 setup.
mattk_r said:
I had this problem with the 1413 build, but not since going to the new 318 setup.
Click to expand...
Click to collapse
Where I can download it from???
Hikari said:
Where I can download it from???
Click to expand...
Click to collapse
there many roms now build on 318
have a look and you will see
its right said:
there many roms now build on 318
have a look and you will see
Click to expand...
Click to collapse
Hmmm but my rom is 5.2.318 (build 15341.4.0.01)
I tracked that down as being a problem with radio signal strength. Every time the radio signal strength changed it would wake up the phone. That was annoying, but I never found a fix for it since I upgraded to a different to a different ROM that doesn't have that problem. It may have been a problem caused by BatteryStatus's signal strength monitor though rather than the ROM's because it didn't start until I installed BS if I remeber right.
just lock the phone
before put the wizard in sleep mode. then it doesn't wake up when you dont neeD it
Hikari said:
Hello,
I have Wizard + WM6 (faria) and recently I noticed that my PDA turns on without any good reason. Previously the display turned on when I received SMS or when there was an incoming call. Needless to say it drives me crazy!!!
Is there any way to investigate the issue (find a reason for this strange behavior)? Pls help.
P.S. Locking the device is not a solution.
Click to expand...
Click to collapse
don't use a windows mobile password in WM6 (start -> settings -> lock). for mee it makes the phone wake up often. if I remove the password it doesnt wake up automaticly any more
hmm
maybe theres a ghost inside your wizard loll
I had a ghost in my wizard once, had it exorcised, and then it moved into my car. Now my car starts on its own!
Indeed I have a password. Furthermore I noticed that at the outset (WM6 + all software I'm using) the problem didn't exist at all. I think that it started after hard reset + system restore (spb backup).
I did some hard reset, but unfortunately the problem still exist (at least I think so, but today I will check it more thoroughly) HELP!
Here's what I would do if I wanted to keep my current rom - assuming it didn't have this behavior before (I've been known to be excessive at times ):
Back up your phone with something like PIM Backup or whatever you prefer - don't forget your themes, pictures, whatever.
Do a hard-reset.
Test for this symptom before installing any applications.
If the symptoms exist, try a different radio, if not, install BatteryStatus and test again.
Continue until you find the culprit.
Might take a while, but you should be able to find the issue...
its right said:
i noticed that before and solved but i cant remember where is the problem exactly.
Click to expand...
Click to collapse
I don't need to know the reason - I just need a solution?
BTW which one is the best WM6 ROM for wizard now?
The problem lies on having a both a password set and backlight settings on. Either remove the password or turn off the "turn off backlight if device unused for..." setting. It solved the problem for me!
You're right, but unfortunately I need the password :/
This weekend I switched to NBD 7.2 and the problem still exist.
Hikari said:
You're right, but unfortunately I need the password :/
This weekend I switched to NBD 7.2 and the problem still exist.
Click to expand...
Click to collapse
If you need a password, then you'll have to go back to WM5. If you just want a password because you want to protect some files, then you should look into encrypting those files.
I hope that there is some way/there will be some rom to support device lock for Wizard's WM6
some WM6 roms seem to work with password.
I am still on a 'old' rom Wizard Reloaded 1.5 and there I can enable the password without waking up problems.
Just try with any rom, if it wakes up, remove the password. I suppose that's not such a big problem for most of us...you can still use Mobile Justice
I hope someone will find the exact cause (regkey probably) of this waking up problem, so any further roms wont have the problem anymore...
Anyone have trouble where the top most bar (the one with the battery & signal strength icons) locks up after running TomTom 6? The bar appears to have a part of the tomtom screen graphics on it, and it completely covers all the stuff that should appear up there. Any ideas? It seems to be causing a failure of some sort.
I have exactly the same problem. In fact it happens on some other apps too. I'll try and get some reproducible sequences up here for the smarter folks to take a look at.
I'll try and do the same. Have you found a workaround to fix things, or do you do a soft reset?
motocrossmann said:
Anyone have trouble where the top most bar (the one with the battery & signal strength icons) locks up after running TomTom 6? The bar appears to have a part of the tomtom screen graphics on it, and it completely covers all the stuff that should appear up there. Any ideas? It seems to be causing a failure of some sort.
Click to expand...
Click to collapse
try to update ur tomtom
waichai said:
try to update ur tomtom
Click to expand...
Click to collapse
whats the newest version?
I can't duplicate this anymore. Go figure...
waichai said:
try to update ur tomtom
Click to expand...
Click to collapse
I'm on 6.030
I will only say this . . .
http://forum.xda-developers.com/showthread.php?t=363431
Please look at that page and good luck. 6.1 and any GPS program are having difficult problems. This, tested by myself and others, fixes those problems for the time being. Good luck.
This is not a TOMTOM problem, this is a general issue on the ROM. I can not reproduce it reliably, but it has happened again. Basically, the Start bar stops.
Definately a general rom problem. I tried all there recommended radios, all have had the problem.
I had the same problem but gone when deactivating CUBE.
msharaf said:
I had the same problem but gone when deactivating CUBE.
Click to expand...
Click to collapse
That seems to have helped. 1.5 days with no problems... Will report back soon.
No Sound?
I got no sound, that's kinda weird-ish right?
Though my speaker (ear) when calling seems to work, the outside speaker for listening to mp3's or putting the call on speaker does nothing.
Anyone recognizes this?
troyk said:
I got no sound, that's kinda weird-ish right?
Though my speaker (ear) when calling seems to work, the outside speaker for listening to mp3's or putting the call on speaker does nothing.
Anyone recognizes this?
Click to expand...
Click to collapse
I had the same problem, you need to read the second post on the Dutty WM6.1 thread, you must use a radio compatible with 6.1, there are atleast 3 there, as soon as i flashed a new radio to my phone my sound worked perfectly
That's strange dude, i already used a WM6.1 compatible Radio rom from another Post. Well, thnx anyway.
Hi,
I'm experiencing the rather annoying behavior that intermittently all long keypress looses functionality. Meaning I can use no speeddail function, no bluethooth or wlan toggling via the volume keys, and also no fast scrolling in menues, file managers, list,... with the down button, but only item per item with multiple key presses. Interestingly most Java applications are not affected.
Any clues what is causing this?
Regards,
i to am facing the same problem. Nothing except the bluetooth and wifi toggle is working.
I tried overclocking but it does'nt seem to work for me!
SAHILISTHEBEST said:
i to am facing the same problem. Nothing except the bluetooth and wifi toggle is working.
I tried overclocking but it does'nt seem to work for me!
Click to expand...
Click to collapse
for me it is same issue! bt nor wifi are working nore commanager is!
got rehgt menu hangign bug in nearly ever programm! havent done annything appeared over night!
hashtowent said:
for me it is same issue! bt nor wifi are working nore commanager is!
got rehgt menu hangign bug in nearly ever programm! havent done annything appeared over night!
Click to expand...
Click to collapse
which rom are u using?
SAHILISTHEBEST said:
which rom are u using?
Click to expand...
Click to collapse
wm 6.5 v1.0 lefab47 alias fireburned.
hashtowent said:
wm 6.5 v1.0 lefab47 alias fireburned.
Click to expand...
Click to collapse
my problem is resolved.
backup ure phone and try flashing some other rom.
but if u want to stick with the same rom u can simply hard reset!!!
it will work. the problem is caused due to some process which is using a lot of memory.
SAHILISTHEBEST said:
my problem is resolved.
backup ure phone and try flashing some other rom.
but if u want to stick with the same rom u can simply hard reset!!!
it will work. the problem is caused due to some process which is using a lot of memory.
Click to expand...
Click to collapse
I'm wondering how long it will take until the problem reappears... Would be interesting to know which process is causing the trouble.
belrei said:
I'm wondering how long it will take until the problem reappears... Would be interesting to know which process is causing the trouble.
Click to expand...
Click to collapse
i think it was activekitten chronos i installed on my memory card!!!
Hi!
I downloaded the new Windows Live Messenger and it works like a charm. The problem is every 5-10 minutes it tells me my connection is lost and it´s trying to reconnect, however the connection had never been lost and it never reconnects. Also the interface becomes glitchy, the soft buttons dissapear, so instead of having a frame around close(when you press the top bar) you only have the word close and touch x taskmanager doesn't have any X's anymore to close applications, only a soft reset fixxes this. Palringo doesn't give me this glitch but I don't like the user interface that much.
Any help?
Thanks!
happens here too its annoying
bigpete78 said:
happens here too its annoying
Click to expand...
Click to collapse
I hope there will be a fix soon because I really like the UI, it's great to work with.
msn has been suffereing this issue for MONTHS!!!!!
You're not the only one. I'm on Telus Mobility with the same issue, funny thing is... It actually happens on the diamond and touch pro now on the STOCK ROM!
So it's clearly an issue with the MSN service itself.
They better fix it because i miss it dearly!
mightymike84 said:
msn has been suffereing this issue for MONTHS!!!!!
You're not the only one. I'm on Telus Mobility with the same issue, funny thing is... It actually happens on the diamond and touch pro now on the STOCK ROM!
So it's clearly an issue with the MSN service itself.
They better fix it because i miss it dearly!
Click to expand...
Click to collapse
Have you guys looked in the Marketplace and downloaded the latest version?
I recall a post or two previously that were solved by the new one.
rp-x1 said:
Have you guys looked in the Marketplace and downloaded the latest version?
I recall a post or two previously that were solved by the new one.
Click to expand...
Click to collapse
I have the latest version, installed it yesterday and the problem is there.
I created a a post in the microsoft forums and it seems updating the radio fixes it but ive just given up and waiting for the nect rom update with the added radio.
Ill dig out my post later.
Radio fix? but I never use the radio application so how is this the cause of the problem?
Bump...........
Any help? How about that microsoft post? Can't find it on the microsoft forums.
Same probs here for already 3 months or so, my Touch Pro also have this problem!
Wtf are they doin at MS ;/
All mine have the same problem.
If I'm not mistaken I've read somewhere that flashing to a new Radio Rom would fix the problem. I'll try this out and let you know how it works out.
BlazinAsian said:
If I'm not mistaken I've read somewhere that flashing to a new Radio Rom would fix the problem. I'll try this out and let you know how it works out.
Click to expand...
Click to collapse
is it working? i have also problems with msn
Nth to do with flashing New Radio Rom
This "disconnect" problem has been happening a long long time since i had Dopod D810, Diamond2, and now HD, and the issue never gets away! I thought was the problem with network privoders over my place(HK), it seems actually not as what i thought...i see all of you here got the same issue...so MS what the fxxk, i am considering of iphone...it seems good in some way...hehe..
thanks
MS is sleeping, its a flaw well known even by Wifi will still get lost connection or updating status. It's so damn irritating every now & then need to flip through the chat windows just to refresh the connections. Unlike Android MSN it realy does auto-reconnect upon lost connection or trying to send message until the other user receives it.