im trying to find the dreadiag.nbh for the uk 1.5 firmware. can anyone send me it (or post a link) or do i have to downgrade to RC-7?
if i have to downgrade can anyone send me the RC-7 dreadiag.nbh or post a link.
i would much appriciate as ive tried to find it every where and the only dreadiag.nbh i found on the forums wouldnt work so i gues that each .nbh file is related to a certain firmware or something?
cheers everyone
zecbmo said:
im trying to find the dreadiag.nbh for the uk 1.5 firmware. can anyone send me it (or post a link) or do i have to downgrade to RC-7?
if i have to downgrade can anyone send me the RC-7 dreadiag.nbh or post a link.
i would much appriciate as ive tried to find it every where and the only dreadiag.nbh i found on the forums wouldnt work so i gues that each .nbh file is related to a certain firmware or something?
cheers everyone
Click to expand...
Click to collapse
What you need is DREAIMG.NBH. Dreadiag.nbh is used for testing only
no it is the dreadiag.nbh im trying to find. my phones orientation is buggered and this can help find a soloution.
cheers
You didn't search enouph. It is on the second page in this forum at the moment.
here is the link
Related
Does anyone have a copy of the Tilt Keyboard OEM package, or know where I could find it in someone else's firmware. I have been searching for it in Alex's firmware (I know it is there somewhere, because I removed something and it screwed up my keyboard), but I have been unable to find it. Any help would be greatly appreciated.
Shadow7789 said:
Does anyone have a copy of the Tilt Keyboard OEM package, or know where I could find it in someone else's firmware. I have been searching for it in Alex's firmware (I know it is there somewhere, because I removed something and it screwed up my keyboard), but I have been unable to find it. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Please read and search more... check the wiki
http://wiki.xda-developers.com/index.php?pagename=TiltSpecificWikiPage
Guys.. Iam sorry to open this Threat but I have questions I need a answer for and I believe I have read everything.
I want to sell the device and that fore it want also the original SPL back.
My Situation:
I reflashed a reconstructed german htc rom and the original radio it was shipped with.
Question is now.. where can I get the SPL part from? I extracted the reconstructed NBH file and gut an NB file but far as I understood I should get more then one file. I believe this is because it is an recontructed rom. Maybe someone can confirm or denied.
Ok... lucky I am am I have got a second device. This device has never been flashed so far.
I managed to dump the rom and now I have these four RAW files but I have no idea how to create a NBH file from it or even better get the SPL/NB whatever file from it.
Is it possible to get it or does the SPL part only comes with a downloadable original rom.
Sorry guys but Iam a little bit confused at the moment. Hopefully someone can get a lite into dark.
Cheers
forget it for the moment. i guess i have found the part i missed.
Hmm.. no.. I learned nothing.
I have no idea what to do next. I have tried to use kaiserkitchen.12-21-07 to get the SPL/NB file but no idea how to do it.
Help is very appreciated.
Have you tried this link? It may be what your looking for.
Yep.. I did but the pproblem beginns at point 5:
sirsycho said:
[size=+2]Updated - NOW IDIOT FRIENDLY[/size]
5. Download NBHExtract and follow the instructions in the link to extract the NB files from the ROM (essentially just copy nbhextract.exe to the temp folder where the nbh file is and run it from a command line - like so C:\temp\kitchen\>nbhextract.exe RUU_signed.nbh
Click to expand...
Click to collapse
The problem is that I just have a reconstructed ROM. If I extract the nbh file I just get one NB file back.
Far as I understood with an original shipped ROM I should get more then one.
As I said I have also these 4 RAW files from the other device but have no idea how to get the NB file out from there.
Maybe this procedure for the niki could help you out,
http://forum.xda-developers.com/showthread.php?t=369578
Just use Kaiser tools instead nike ones...but should be same. Have you been able to find an SPL for kaiser already ?
UPDATE: http://forum.xda-developers.com/showthread.php?t=335568 take a look
thommic said:
Yep.. I did but the pproblem beginns at point 5:
The problem is that I just have a reconstructed ROM. If I extract the nbh file I just get one NB file back.
Far as I understood with an original shipped ROM I should get more then one.
As I said I have also these 4 RAW files from the other device but have no idea how to get the NB file out from there.
Click to expand...
Click to collapse
Thanks guys!
Just one question. Is the modified SPL illegal or is it ok to have it?
If not i would prefer not to do any experiments with it anymore.
I found some SPLs but I am absolulty not sure if I should use them as I do not know if they are for a Kaiser.
I guess there are differences in the SPL.
thommic said:
Thanks guys!
Just one question. Is the modified SPL illegal or is it ok to have it?
If not i would prefer not to do any experiments with it anymore.
I found some SPLs but I am absolulty not sure if I should use them as I do not know if they are for a Kaiser.
I guess there are differences in the SPL.
Click to expand...
Click to collapse
I don't think it would be considered illegal, but for the purposes of warranty, a carrier could refuse coverage if they go far enough as to check your SPL version, since loading non-carrier specific ROMs cannot be done without modding the SPL.
thommic said:
Thanks guys!
Just one question. Is the modified SPL illegal or is it ok to have it?
If not i would prefer not to do any experiments with it anymore.
I found some SPLs but I am absolulty not sure if I should use them as I do not know if they are for a Kaiser.
I guess there are differences in the SPL.
Click to expand...
Click to collapse
The main reason why you'd revert back to the original SPL is for warranty return.
If your carrier (or HTC) honors warranty returns from second owner, then it is highly suggested that you revert your SPL back, so that they won't have unforseen problems, should they require to exercise the warranty. You can skip this if they're fully aware of this site and plan to install ROMs anyway
You can find the appropriate Kaiser SPL link in the sticky or the Kaiser wiki, under ROM Troubleshooting.
Hi!
Is there any tutorial around how to dump a complete kaiser (in order to send it in for guaranty-repair)?
I have a second one with original bootloader, ROM, Radio etc... -> whats the best way to turn my flashed Kaiser into an original one again?
thx for your efforts and sorry if this question is redundant...
licht77 said:
Hi!
Is there any tutorial around how to dump a complete kaiser (in order to send it in for guaranty-repair)?
I have a second one with original bootloader, ROM, Radio etc... -> whats the best way to turn my flashed Kaiser into an original one again?
thx for your efforts and sorry if this question is redundant...
Click to expand...
Click to collapse
Well At leat you appolgized for the redundancy...
Check the first thread, it has everything you need.
From Dumping a ROM, to Rebuilding a dumped ROM (If you want to flash to your original)
As far as warranty exchange goes. There is a section for reverting to the original SPL, then flash the original ROM, and it's all set.
Once again, check the first Thread, G.W.E.N.I. has all the answers
XC
http://forum.xda-developers.com/showthread.php?t=335568
Thanks a lot for the answers - as for my apologies for the stupid post ill share my dumped original ROM as soon as possible as others contacted me for that just this moment...
Hm ok its not THAT easy... actually i am getting stuck while playing around with the Kitchen in order to get align with the steps of the mentioned guide... (dumping to the 4 raw parts is ok... but how to get to an nbh file for nbhextract?)
Any hints / help is highly appreciated (I can supply the 4 raw files if needed)
Upload it & I'll reconstitute for you. Otherwise follow the directions in the "How to rebuild dumped roms". http://forum.xda-developers.com/showthread.php?t=337066
licht77 said:
Hm ok its not THAT easy... actually i am getting stuck while playing around with the Kitchen in order to get align with the steps of the mentioned guide... (dumping to the 4 raw parts is ok... but how to get to an nbh file for nbhextract?)
Any hints / help is highly appreciated (I can supply the 4 raw files if needed)
Click to expand...
Click to collapse
Thx for your effort! I sent u the link to the raw files via PM...
Ok ive looked everywhere and im slightly confused on what im missing ive searched around and cant find a simple answer on how to go about flashing a new ROM for my fuze.
Ive got ROMeOS 1.40.1, CustomRUU, and HARDSPL
I havent got the phone in yet its supossed to be coming in today and i was wondering what do i do with the .nbh file and should i install both CustomRUU and HARDSPL or will one do the trick?
If anyone could explain this i would greatly appreciate it!
thanks, boo
7boo said:
Ok ive looked everywhere and im slightly confused on what im missing ive searched around and cant find a simple answer on how to go about flashing a new ROM for my fuze.
Ive got ROMeOS 1.40.1, CustomRUU, and HARDSPL
I havent got the phone in yet its supossed to be coming in today and i was wondering what do i do with the .nbh file and should i install both CustomRUU and HARDSPL or will one do the trick?
If anyone could explain this i would greatly appreciate it!
thanks, boo
Click to expand...
Click to collapse
Check these pages:
http://wiki.xda-developers.com/index.php?pagename=Raphael_HardSPL
http://forum.xda-developers.com/showthread.php?t=410150
Ive been to those pages but it still fails to explain on how to flash the ROM? Or am i missing something?
Which one should i use to install the ROMeOS ROM?
Sorry for being so lost its my first PPC
7boo said:
Ive been to those pages but it still fails to explain on how to flash the ROM? Or am i missing something?
Which one should i use to install the ROMeOS ROM?
Sorry for being so lost its my first PPC
Click to expand...
Click to collapse
I flashed my first rom (ever) 3 days ago, so I'm clearly not the most knowledgeable person to answer this question, but I'll give it a shot and old hands on this message board can correct me. I will warn you though, you can search the website for this answer.
The wiki page is helpful... Read it and read this gazillion posts in this forum on that topic before you do anything. Make sure you phone is sync'ed with activesync, make sure your battery is over 50% charged and run HardSPL while your phone is connected via USB. HardSPL will walk you through what you need to do via on-screen prompts.
Once that's done, make sure your NHB & custom RUU file are in the same directory on your PC. Same warnings as before (activesync completed/50% battery) except this time run the custom RUU file. I actually used RaphaelWrapper.exe which you can find on this forum and this provided the same guided prompts on installing the ROM. That should do it.
What did I miss?
I tried running HARDSPL and it sticks on 0% what am i doing wrong?
slyng1 said:
I flashed my first rom (ever) 3 days ago, so I'm clearly not the most knowledgeable person to answer this question, but I'll give it a shot and old hands on this message board can correct me. I will warn you though, you can search the website for this answer.
The wiki page is helpful... Read it and read this gazillion posts in this forum on that topic before you do anything. Make sure you phone is sync'ed with activesync, make sure your battery is over 50% charged and run HardSPL while your phone is connected via USB. HardSPL will walk you through what you need to do via on-screen prompts.
Once that's done, make sure your NHB & custom RUU file are in the same directory on your PC. Same warnings as before (activesync completed/50% battery) except this time run the custom RUU file. I actually used RaphaelWrapper.exe which you can find on this forum and this provided the same guided prompts on installing the ROM. That should do it.
What did I miss?
Click to expand...
Click to collapse
Thanks, that worked perfect explained very well! everything went smooth!
7boo said:
Thanks, that worked perfect explained very well! everything went smooth!
Click to expand...
Click to collapse
Glad I could Help.
Im more of a plumber than a programer...Lol
I have a couple nbh files that ive been trying to figure out how to get them into a ruu so i can update my rom. i cant seem to get this.
I have winrar,7zip,
is it possible for somone to put these into a ruu if i posted a link or sent them?
Ive ben trying to recover this back so i can start all over..
forget about zip and such packet programs
click xda-wiki and find your device
and read how you update it with a nbr file