Hero rom Help! - myTouch 3G, Magic Android Development

hi guys, I bought a rogers htc magic a couple of days back, looking at the forums i decided to use the hero rom because it looked fantastic.
After 3 days of painful proceders like partitioning my sd card, writing the rom as update.zip and trying to root the pphone and use fast boot i have failed miserably!
When i tried the partition, ext2 and copy update.zip with ubuntu, the phone didnt recognize the ext 2 partition, only finding the now smaller fat32 partition.
When i tried just placing the rom as update.zip on the sd card and trying to load it from the power+home meny it said the rom is unsigned and will not install it!!
With fast boot i just got lost!
Now i read somewhere you can mod the update.zip to make it signed so it can install on the phone, i dont know how!
Pls help!

PS:
im not familiar with teminal or the cmd to root the device so any further explination will be greatly appreciated!

RE:
wow u guys forget it im getting an iPhone!
ZMOG thats easier to modify as well 2 step jailbreak process!!

Killadude said:
wow u guys forget it im getting an iPhone!
ZMOG thats easier to modify as well 2 step jailbreak process!!
Click to expand...
Click to collapse
There's an auto signer in themes section for the Dream. Maybe you should just get an iPhone if that's what you want. Android is the future.

Re:
dude i was just kidding..... i dont no goddamm iPhone!!!
I agree android is the future... i was just higlighting the fact that its so easy to mod the iphone, ie software mods, where as for the androis i have to go through so may complicated methords and yet get no results.
PS ill have a look at the autosigner in the themes section.
Also any other help will be greatly apreciated.

PLS HELP!
Still no help..............

I suggest that you try reading the comment about the signer!
Get your stuff signed and it will install, otherwise find a source that is signed.

Good luck. Rogers can only run the Daldroid Rom, so for the time being Hero probably won't work.
When I had got my Rogers to finally run the Daldroid rom, I experimented with some other roms and, although they would flash, booting into them didn't happen. Looks like we gotta do a litrle more waiting.

I know... sucks balls that only daldroid works... daldroid is the same Rom as the Rogers one except the Rogers junk..... but I heard that HTC will be releasing Tue sense UI to previous android phones so I guess ill just have to wait...............

Related

If I want to revert back to "official" G1 firmware, what about the HardSPL?

I plan on rooting my phone in the next couple of days, but I was wondering if the HardSPL that you install during the "How To Root your G1" tutorial will cause any issues if I want to go back to the "official" g1 firmware from Tmobile. From reading about SPL, the stock SPL is from HTC but the HardSPL thats on the tutorial is modified. Would I replace the modified SPL if I want to go back to the official firmware?
If you look real hard, you can find a sticky about this!
But I'll be nice and sweet tonight, so here it is!
http://www.google.com/support/forum/p/Google+Mobile/thread?tid=3e938d02f4c16b82&hl=en
vdl68 said:
If you look real hard, you can find a sticky about this!
But I'll be nice and sweet tonight, so here it is!
http://www.google.com/support/forum/p/Google+Mobile/thread?tid=3e938d02f4c16b82&hl=en
Click to expand...
Click to collapse
Did you post in the wrong thread? That link is about rc33 OTA update. My question is about getting back to official firmware after rooting the phone and whether the HardSPL can stay or revert back to the original.
androidmonkey said:
Did you post in the wrong thread? That link is about rc33 OTA update. My question is about getting back to official firmware after rooting the phone and whether the HardSPL can stay or revert back to the original.
Click to expand...
Click to collapse
here: http://forum.xda-developers.com/showthread.php?t=455860
to go back to original everything just use the original spl in an update.zip and then use the DREAIMG.nbh from when you rooted your phone and you will have stock stuff like it just came out of the box
tubaking182 said:
here: http://forum.xda-developers.com/showthread.php?t=455860
to go back to original everything just use the original spl in an update.zip and then use the DREAIMG.nbh from when you rooted your phone and you will have stock stuff like it just came out of the box
Click to expand...
Click to collapse
So if I want to go back I would first install the rc29 then the original SPL, then upgrade to rc33?
Whats the purpose of using the HardSPL vs the original SPL?
no, do the original SPL THEN the .nbh you need to have root to flash an update.zip that is not signed with the proper keys, as for the benefits of hard SPL over the original go here and read
http://forum.xda-developers.com/showthread.php?t=455860
i took a look at all your posts and EVERYTHING you have said on the boards so far has been a question that is easily answered if you read. good luck on this phone i give you a week before i see a thread saying you bricked it
tubaking182 said:
i took a look at all your posts and EVERYTHING you have said on the boards so far has been a question that is easily answered if you read. good luck on this phone i give you a week before i see a thread saying you bricked it
Click to expand...
Click to collapse
Thanks. Some of the FAQs are not very clear. I'm not sure what you mean by EVERYTHING I've said on the board...
btw, are you hoping I brick my phone? So far I've read 4 different tutorials on how to root your phone. Each one has something different than the other. I'm just trying to get the facts straight before rooting my phone.
look for the thread "app that roots your phone" tell him in a PM that you want to beta test it, when i ran it or him on the last version he needed to fix the telnet script and he is pretty sure he got that working. i would give the link but since it is not my app it is not my place to give out the link.
i do not hope you brick your phone, but i see it as an inevitable thing, i know what i'm doing, i'm no guru but certainly not a n00b and i have managed to "brick" my phone just bout every day because i am always trying new things. the main thing to remember is that as long as when you turn your phone in you get the SPL or recovery then you do not have a true brick. i wish you the best in all your hacking but be forewarned that everything you try has the potential to render the phone unusable for a few hours till you figure out how to fix it. ALWAYS keep the DREAIMG.nbh on your sdcard and an update.zip that contains one of the many JF builds and you will never be too far from fixing your phone.
tubaking182 said:
i do not hope you brick your phone, but i see it as an inevitable thing, i know what i'm doing, i'm no guru but certainly not a n00b and i have managed to "brick" my phone just bout every day because i am always trying new things.
Click to expand...
Click to collapse
I understand. Hopefully I wont brick the phone but the nice thing about GSM phones is that I can jut pop my SIM card into my old phone if any issues come up with the G1. I just see people being mean to noobs when at some point in time they were noobs also.
The main reason I want to root the phone is to move the cache to my SD card. The onboard memory on the G1 is a joke. I knew the limitations when I bought the phone in October, but I thought for sure they would have come out with a update that lets you run apps from your SD card. Being a early adopter is fun
if you have less than a class 6 sdcard then moving the cache will have loads of lag, took 3 seconds to delete an email on my class 4. but if you just wanna move apps then you'll be fine
tubaking182 said:
if you have less than a class 6 sdcard then moving the cache will have loads of lag, took 3 seconds to delete an email on my class 4. but if you just wanna move apps then you'll be fine
Click to expand...
Click to collapse
Interesting. I may have to buy a microSDHC card since the microSD card that came with the phone has no rating on it. After reading about SDHC, it seems only SDHC has the 2,4,6 rating.
use the RC29 NBH, it flashes everything including bootloader, then use the official signed RC33 update (40mb) and you will be back to stock rc33
korndub said:
use the RC29 NBH, it flashes everything including bootloader, then use the official signed RC33 update (40mb) and you will be back to stock rc33
Click to expand...
Click to collapse
Thanks korndub
androidmonkey said:
I understand. Hopefully I wont brick the phone but the nice thing about GSM phones is that I can jut pop my SIM card into my old phone if any issues come up with the G1. I just see people being mean to noobs when at some point in time they were noobs also.
The main reason I want to root the phone is to move the cache to my SD card. The onboard memory on the G1 is a joke. I knew the limitations when I bought the phone in October, but I thought for sure they would have come out with a update that lets you run apps from your SD card. Being a early adopter is fun
Click to expand...
Click to collapse
i was a noob before i found xda.. but in the short time i have been here i have learned sooo much.. i love this site and my rooted/themed G1!
Welcome!

How 2 Root 1.33.0006 SPL & Flash SPL || MyTouch3G / 32B Magic || Without Goldcard ||

How 2 Root 1.33.0006 SPL & Flash SPL || MyTouch3G / 32B Magic || Without Goldcard ||
Tutorial : Rooting the "perfect" 1.33.0006 SPL & Flashing a new SPL
Newb Difficulty Level: 5/10 (A learning android newb)
Advanced Root User Difficulty Level: EASY!
GIVE CREDIT WHEN ITS DUE!
Note to readers:
I actually found a easy fix for 1.33.0006 for 32B Magic or MYTouch3G phones
KEEP IN MIND THAT I AM USING A MERLOT MYTOUCH3G, Stock 4GB SD card & BROKEN "Market" Application SO MAKE SURE YOUR DOWNLOADING THE FILES THAT WORK BEST FOR YOUR DEVICE and I am only providing steps used to bypass the "PERFECT SPL 1.33.0006" & YOUR RESPONSIBLE FOR THE RESULT OF YOUR DEVICE!
FILES I USED:
*ADB is a MUST so make sure to watch this video to safely install ADB
(NOTE: The video is using 1.6 donut spk... the steps are the same but use the 1.5 r3 spk on the same page given on the video.)
*flashrec-20090815.apk
MAKE SURE YOU USE THIS VERSION...!
* "Rooted" Recovery Image
I am using Amon_Ra's recovery-RA-magic-v1.2.3G which in my opinion is the best as it has flashed every rom perfectly if you know what your doing but it depends on what rom you will be flashing in some cases.
* A NEW SPL!
I am currently using Engineering-SPL-HBOOT-1.33.2009-signed by Amon_RA (BIG UPs TO Amon_RA for these files) on my T-Mo MyTouch3G but it depends on your device.
NOW TO WORK!
Step One - Enable USB Debug/Development Mode:
*Load up your device till you reach your home screen. Once your device is up and running hold menu and go to settings>applications>development then enable "USB Debugging" then press home & plug the device up to your PC & DONT MOUNT.
Step Two - Install Recovery Image Loader via ADB:
*Open CMD and as the video above stated you must navigate to your ADB folder. Once that is done you should install flashrec-20090815.apk (Recovery Image Loader) though CMD by placing it on both your SDCARD & the ADB Tools Folder (For me its C:\android\tools\).
~Now type these commands within CMD:
cd c:\android\tools (press enter)
adb install flashrec-20090815.apk (press enter)
*Now you have installed Recovery Image Loader and you may now close CMD but dont restart your device
Step Three - Rooting the unrootable (Sorta):
*Now find your recovery image ( Example : Recovery-RA-Magic-v1.2.3G.img or Recovery.img). Once found rename it as "cm-recovery-1.4.img"! Save this file to the root of your SDcard & delete the "flashrec-20090815.apk". now press backup recovery image and wait till its done (quick 2secs) then erase everything but "cm-recovery-1.4.img" within the text box. Now type " /sdcard/cm-recovery-1.4.img ". Now press FLASH RECOVERY IMAGE and wait till its done. Once its done restart the device and be aware that you will lose everything that isnt saved to your google account or backed up to your PC.
SMART COMMENT: WOW DID I JUST ROOT THE UNROOTABLE? I guess I did lol
Step Four - Change SPL to Prevent this issue in the future:
*Move the SPL ( & the ROM if you want to start installing it right away ) you downloaded earlier to your SD card and delete everything else if you want. Now select "WIPE/FACTORY SETTINGS" and follow on screen instructions and then do this a additional 2 times to be safe. Now flash the SPL and once it starts to reboot on its own (after it shows the picture of a box and a device) hold the home button and then FLASH YOUR ROM
THATS IT! YOUR DONE AND YES I DID SHOW YOU HOW TO ROOT 1.33.0006 but it doesnt run properly so make sure you flashed a new SPL before flashing any new "Radio" or "ROM" images or you could brick your device.
HOPE THIS HELPED MANY WHO HAD PROBLEMS ROOTING THE DEVICE!​
isn't this just the same as the one click root? cuz on the one click root you don't need adb. It just seems like you are adding necessary steps to it. Please correct me if I am wrong. I don't mean to bash your work by any means.
I don't see why no one else has congratulated you on compiling one of these for those people that might eventually NEED THIS GUIDE! Lol.
Great work. Simple.
I had the "perfected SPL" when I picked up my MT3G on the release date. Pretty unfortunate...but I rooted it like two days later. Lol.
I never got an answer in the other SPL thread so here it goes...
Can we safely go from one SPL to another?? The reason I ask is I have the problem with the blurry screen at boot but I only encountered it when I flashed a new SPL. Now I have read up on it & it looks like some people running the same ROM with different SPL's don't have the blurry screen.
Seeing how so many people had problems bricking with haykuro's DangerSPL, the SPL is something I don't wanna mess with unless I have a definate answer. So anyone wanna chime in on this?
Beast84 said:
I never got an answer in the other SPL thread so here it goes...
Can we safely go from one SPL to another?? The reason I ask is I have the problem with the blurry screen at boot but I only encountered it when I flashed a new SPL. Now I have read up on it & it looks like some people running the same ROM with different SPL's don't have the blurry screen.
Seeing how so many people had problems bricking with haykuro's DangerSPL, the SPL is something I don't wanna mess with unless I have a definate answer. So anyone wanna chime in on this?
Click to expand...
Click to collapse
yea... could i go from 2005 one to the 2009 one? any help there?
bogdi1988 said:
yea... could i go from 2005 one to the 2009 one? any help there?
Click to expand...
Click to collapse
@Everyone above (excluding Reignzone)
Lol really? okay try flashing 1.33.0006 haha
It wont be as easy as you all think
@Reignzone
Thanks
Azuske said:
@Everyone above (excluding Reignzone)
Lol really? okay try flashing 1.33.0006 haha
It wont be as easy as you all think
@Reignzone
Thanks
Click to expand...
Click to collapse
No, you are right it won't be, but if you downgrade back to cupcake, you can one click again. Anyway, nice post man. Great job.
Thanks
Thats exactly why I posted this because I had a hard time getting back to cupcake because of the spl
Hello there, thanks for the guide.
I try to follow your guide to root my HTC Magic and I have some questions.
1. I run the command "adb install flashrec-20090815.apk " and it installed the flashrec to "/data/local/tmp" directory. Is this correct?
2. I copied the recovery image to the sd card and insert into the phone. then based on you guide. I should delete the flashrec I installed while ago. But I cannot delete the file. Can you give us more details regarding this one? Thanks.
3. Sorry but I have some hard time to sollow the step three. Can you give us more details about this.
thank you and good day
Steven
To be 100% honest im not sure where it is saved... i just happened to run into a working solution at random.
I do know that the older version i tried (Recovery Image app) didnt want to install
Reignzone said:
I don't see why no one else has congratulated you on compiling one of these for those people that might eventually NEED THIS GUIDE! Lol.
.
Click to expand...
Click to collapse
Umm because it doesn't do anything. flashrec ANY VERSION does NOT work on a phone with 1.33.0006
scrufy Originally Posted by Reignzone I don't see why no one else has congratulated y for those people that might eventually NEED TH. Umm because it doesn't do anything. flashrec ANY VERSIO phone with 1.33.0006 Today 03:28 Pm. Yes it did for me. at least in cupcake.I'm not sure in donut.guess you have to downgrade to cupcake.
scrufy said:
Umm because it doesn't do anything. flashrec ANY VERSION does NOT work on a phone with 1.33.0006
Click to expand...
Click to collapse
LOL WOW he had the same problems dude and he is a developer...
Maybe you did something wrong when installing it
Azuske said:
@Everyone above (excluding Reignzone)
Lol really? okay try flashing 1.33.0006 haha
It wont be as easy as you all think
@Reignzone
Thanks
Click to expand...
Click to collapse
So basically what you're saying is you don't know?? If you don't, that's cool. But don't laugh & then not give an answer. Just makes you seem arrogant, like you feel better than us. Which, by the way, YOU AREN'T!
Beast84 said:
So basically what you're saying is you don't know?? If you don't, that's cool. But don't laugh & then not give an answer. Just makes you seem arrogant, like you feel better than us. Which, by the way, YOU AREN'T!
Click to expand...
Click to collapse
Sorry if you took it that way but that isn't what runs through my head when I laugh or anything... My bad -_-
ANYWAY I only know what I posted... I am a learning newb and I am getting better at this stuff as I go. My tutorial explains exactly what I did.
EDIT:
P.S. My smartass comment was for the people that was calling this useless just because they didn't experience this issue
Azuske said:
Sorry if you took it that way but that isn't what runs through my head when I laugh or anything... My bad -_-
ANYWAY I only know what I posted... I am a learning newb and I am getting better at this stuff as I go. My tutorial explains exactly what I did.
EDIT:
P.S. My smartass comment was for the people that was calling this useless just because they didn't experience this issue
Click to expand...
Click to collapse
Eh no hard feelings, I was just looking for a straight answer. I just wanna get rid of that damn blurry screen, thats all. Thanks for the step by step tho. I did it the easy way with one click root but I did my G1 the hard way so I know how frustrating things can get. Thanks again
i was able to flash SPL 1.33.0006
I had rooted my MYTOUCH 3G in August using the one-click method. I have been running several ROMS since then. But I never tried to flash a new SPL. However, after reading this post I decided to give it a try. I booted into recovery mode/ wiped and then flash 1.33.2009 SPL. It loaded and rebooted into recovery again. I then wiped and loaded a ROM. everything is fine.
Later I checked and I now have 1.33.2009 SPL the perfect SPL 1.33.0006 is gone.
so im on a rooted mt3g, i have been running different roms, cyan, hero, dwang, i am at dwang 1.13. so to flash the 1.33.2009 spl do i have to wipe and flash to dwang 1.12 then flash the spl then dwang 1.13?
also what are the advantages/disadvantage?
which spl should i use?
thanks
Hi
I have 1.33.0004 on my 32B Sapphire and Android 1.6. Will this method help me root my phone? If not then is there an easy way to root my phone?
Thanks in advance

Rooting Mytouch Fender LE 32a/ Mytouch 1.2 UNIVERSAL ANDROOT CONFIRMED WORKING!!!

Universal Androot confirmed working. This method is no longer needed and is to dangourous for some people so please use universal androot 1.5.3+
IF READ CORRECTLY YOU WILL NOT BRICK. BUT, Since a few of you dont have that ability, I AM NOT RESPONSIBLE FOR YOU BRICKING YOUR PHONE. There are no pros to rooting this phone yet, leave it alone if you dont know what your doing PLEASE. I beg you. You are in essence almost bricking your phone in order to root it in the first place. These arent fun and games, It is dangerous to rush this stuff
Listen.. Im more then happy to help people. BUt I fully understand why so many devs have left this place. Some of you are so utterly ridiculous with your questions, wanting someone to hold your hand. I cant sit on gtalk for hours helping you go through what should take 10 min , I have a life and kids and other things to do. I did this because I was bored and wanted to see if I could. There is not point in rooting it yet, there are no roms, nor will there be for at least a month. Please, if you cant even understand simple questions, have never rooted or even used an android phone before, please.. do not bother me. This place is insane with stupidity. I will change the tutorial in a little more detail later, but fo rnow, DO NOT DO THIS IF YOU DONT KNOW WHAT YORU DOING. IF YOUR BREAK YOUR CRAP< I DONT CARE, BECAUSE IT WASNT MY FAULT.
I am in no way an angry or mean person, but you people have given me a migraine. I see why all the rom devs hide from here so much
THERE IS NO POINT IN ROOTING THIS PHONE YET PEOPLE, SO STOP.. OMG PLEASE STOP LOL
IT HAS BEEN DONE!!! lol
After 3 days, sleepless night and 5 min from returning the phone, Together with the Awesome Cursordroid We have achieved full root of the fender mytouch/ Mytouch 1.2 revision.
Now.. Understand.. not many will have the fender Mytouch.. but this is the hardware they WILL be using in the fully confirmed Mytouch 1.2
If you do not follow my instructions fully, NOTHING WILL WORK.
Start by making a working gold card, pay VERY CLOSE attention to what the instructions for making a gold card say
http://theunlockr.com/2009/08/14/how-to-root-your-mytouch-3g/
READ READ READ. DO NOT download the SAPPimg.zip file it says on that page.
Get the top fixed SPL file 2010 from here
http://forum.xda-developers.com/showpost.php?p=4332591&postcount=1
Once you have you working goldcard (remember, apply to PHYSICAL not LOGICAL) rename the fixed SPL/rom you just downloaded to SAPPIMG.img
Put that file on your gold card
Hold volume down while hitting power
You will boot into Hboot, and if goldcard was made correcly and file is in root, it will begin to read. MAke sure battery is full or chargeing. follow on screen directions for flashing. Reboot into Hboot.
You are now screwed with a downgraded SPL and radio that do not work on this phone YAAAAAAY.
Now grab the stock radio and SPL from Cursordroid here http://forum.xda-developers.com/showthread.php?p=5451898&posted=1#post5451898
From there on follow hiw directions for reupdating your radio and spl, plus give yourself a new recovery making ROOT.
Im not good at tutorials or typing on a tiny netbook keyboard so please forgive. Anyquestions please ask and I will go into more detail
In order
Goldcard
Amen ras fixed spl rom renamed SAPPIMG.img
Boot into Hboot volume down/power
let rom install saying yes to what it says. If it works..
Now boot into your recovery through fastboot
Flash phone with stock fender rom
reboot into fastboot
back out of update when it asks and flash STOCK radio and SPL back, now reboot
your splash screen for fender IS GONE, get over it. You can make a new one later if you realllly need to.
if you build the thread they will come, oh yes, they will come.
thebluecoat said:
if you build the thread they will come, oh yes, they will come.
Click to expand...
Click to collapse
lol.. I figured if I could get a thread up with all our info, maybe I could get more people interested just for the fact hat nothing now works... which means this could be the same build in the coming Mytouch 1.2 that is basicly the same exact phone as the fender.
hey, im new here but i have a rooted g1. and i've been skimming thru the fender pages.
I also work at tmobile and used my discount to snag the fender. but as of now im still using my rooted g1 which currently has a tiny scratch on it which i cant stand "hence why i got a fender".
seems to me once the new mytouches come out with the 32a and 3.5 mm jack there will be more attempting to pwn his phone.
im still fairly new to all of this soo im tryin to soak up as much knowledge as i can.
but still w/o the root. the fender still is a sweet phone haha.
idk what to do with it, it just sits in my room i havent even put my sim into it yet. im deciding either to sell it or just let it sit until it can be rooted.
i use the wireless tether too much to switch to the mytouch.
in the mean time g'luck! kinda rough for us LE owners cuz only few people have it to play around with.
This might be noob as I am not 100% sure what perfected SPL means, but I had a SPL that gave the fastboot "no remote" error.
I used an official SEA RUU that comes with a ENG SPL, then I could update change what ever I wanted.
Thought I would just through it out there.
My phone is a model A6161.
Make a goldcard.
Then try to find an official HTC RUU with version higher than 2.08.531.1 but which has an open SPL or is only Cupcake so 1-click-root will work.
If that doesn't work just try a regular sappimg.nbh, but with goldcard too.
maxisma said:
Make a goldcard.
Then try to find an official HTC RUU with version higher than 2.08.531.1 but which has an open SPL or is only Cupcake so 1-click-root will work.
If that doesn't work just try a regular sappimg.nbh, but with goldcard too.
Click to expand...
Click to collapse
The problem is after days of reading and trying 5 different sapp.img every file gets the same device id failure. But I do understand having to find a higher number rom so Ill start on that quest.
So basicly what you saying is I need to find a pre rooted "offcial" rom that has and eng SPL allready or a 1.5 rom with open spl?
Ill try the 1.5 cupcake idea because the goldcard methos so far doesnt seem to work but that would make sense if we are trying to use to old a versions to root.
Looks like I have a new project for the day lol
crypysmoker said:
The problem is after days of reading and trying 5 different sapp.img every file gets the same device id failure. But I do understand having to find a higher number rom so Ill start on that quest.
So basicly what you saying is I need to find a pre rooted "offcial" rom that has and eng SPL allready or a 1.5 rom with open spl?
Ill try the 1.5 cupcake idea because the goldcard methos so far doesnt seem to work but that would make sense if we are trying to use to old a versions to root.
Looks like I have a new project for the day lol
Click to expand...
Click to collapse
I've already tried that, didnt work for me, got "Invalid device ID" however, I cannot make a gold-card because I always get "damaged sd card" or windows says I need to format it right. I'm 100% sure I did it right to three different SD cards, and I still got the same error.
--edit-- if you successfully make a goldcard for this phone, Ill pm you for shipping info LOL!
crypysmoker said:
The problem is after days of reading and trying 5 different sapp.img every file gets the same device id failure. But I do understand having to find a higher number rom so Ill start on that quest.
So basicly what you saying is I need to find a pre rooted "offcial" rom that has and eng SPL allready or a 1.5 rom with open spl?
Ill try the 1.5 cupcake idea because the goldcard methos so far doesnt seem to work but that would make sense if we are trying to use to old a versions to root.
Looks like I have a new project for the day lol
Click to expand...
Click to collapse
I think, your current way will not end with success.
Wrong model id or device id means, that HTC decided pick out Fender in another serie. Yes, i agree, that Fender has same SPL as Magics, but trying flash anything, that has another model id like trying flash Hero's ROM to Tattoo.
SPL ia like a computer's BIOS. SO if you flash foreign bios - your comp will probably die....
Saddened by the fact that Fender is limited edition. So it will not have big knowledgebase like Magic.
5[Strogino] said:
I think, your current way will not end with success.
Wrong model id or device id means, that HTC decided pick out Fender in another serie. Yes, i agree, that Fender has same SPL as Magics, but trying flash anything, that has another model id like trying flash Hero's ROM to Tattoo.
SPL ia like a computer's BIOS. SO if you flash foreign bios - your comp will probably die....
Saddened by the fact that Fender is limited edition. So it will not have big knowledgebase like Magic.
Click to expand...
Click to collapse
While the Fender is le, the mt3g 1.2 is the same hardware, so hopefully someone will get it figured out.
chrys9989 said:
While the Fender is le, the mt3g 1.2 is the same hardware, so hopefully someone will get it figured out.
Click to expand...
Click to collapse
Oh. Chances growing up.
I'm new here, but typically how do people go about getting the attention of devs? Is it just create a thread an hope enough people show interest? Should we do a roll call of how many actually are interested in rooting this phone?
thebluecoat said:
I've already tried that, didnt work for me, got "Invalid device ID" however, I cannot make a gold-card because I always get "damaged sd card" or windows says I need to format it right. I'm 100% sure I did it right to three different SD cards, and I still got the same error.
--edit-- if you successfully make a goldcard for this phone, Ill pm you for shipping info LOL!
Click to expand...
Click to collapse
No.. I got the gold card made. The only reason it ever comes up as damged or reformat is because you applied the goldimg to the logical drive which is at top of list as opposed to Physical REMOVABLE DISK at the bottm. Its the only time I can get the error. but if I apply the goldimg to the logical drive it makes a perfect goldcard everytime. I tested it on aspar g1. So... its not a godl card problem lol
maxisma said:
Make a goldcard.
Then try to find an official HTC RUU with version higher than 2.08.531.1 but which has an open SPL or is only Cupcake so 1-click-root will work.
If that doesn't work just try a regular sappimg.nbh, but with goldcard too.
Click to expand...
Click to collapse
Looking through here for HTC RUU roms I seem to keep geeting dragged to the hero and WinMob forums which I dont think I should be. Where exactly would I find this?
My ideas are..
Find a rom of higher version that is rooted see if it works.
Find an older 1.5 build (which is proving hard) and go from there
Try and flash the rooted fender donut over it and see the results.
My main problem with this is, I dont think its able to be downgraded past 1.6.. Just like newer PSP's cant be downgraded to 1.5
After formatiing my 2gb sandisk (which may be the problem) now when using the 98mb SAPPIMG.zip I get "Main version is older" instead of "Device id failed"
Is this a good sign to on the right track? Im going to try the 62mb SappIMG.zip from amon ra's tut as soon as its done downloading and see if theres a difference.
Now.. what does main version is older mean? The firmware or the spl/radio. if so... is there a newer version i can use/or substitute a file for the Sappimg.nbh to just install a higher version rom.
Man.. The G1 is so much easier to do all this with lol
YEEEEES. Ok. I freaking fracking diddley did it. OMG i was sooo scared.
Wooo So happy now.
I unable to update my OP and thread title if a mod can help me with that.
If noone minds I am going to post my first ever tutorial on something. this was a real pain but I am up and running on Amon ras latest rom for now. On to the recovery....
EDIT-- Got a fully functioning Manups 2.1 1.5 going. THEBLUECOAT if you want to know how to do it PM me... Otherwise give me about an hour or so and I will have a full tut posted
AHHH.. EVEN worse.. I noticed now that it says I have a 32b board NOOOO
EDIT2- Such a dumbass I didnt make a backup of the orignal. Poop.. I liked the boot image and music apps. I just wish I could figure out why all roms so far dont recognize the touch screen as being there and want me to use the track ball. Even power button has 1 option Power off lol
UMMM touch screen not working. What didnt I do?
How do I get my SDCARD to not show up under logical, its under logical but the drive says "removable disk" all I have are phones to use, would this not be possible or would I need a driver replacement
thebluecoat said:
How do I get my SDCARD to not show up under logical, its under logical but the drive says "removable disk" all I have are phones to use, would this not be possible or would I need a driver replacement
Click to expand...
Click to collapse
you HAVE to use a card reader. thats where your problem has been. You have to use a card reader so that it sees the reader AND the card seperatly. So in hex, you dont see Logical drive then a row and then Physical and a row?
Im not pissed... I had the 2010 eng spl... trying to flash roms. No rom would use touch screen. so started over and ened up with a 32 b board now and a perfected spl again.... lol Argh... trying through it again now.
crypysmoker said:
you HAVE to use a card reader. thats where your problem has been. You have to use a card reader so that it sees the reader AND the card seperatly. So in hex, you dont see Logical drive then a row and then Physical and a row?
Im not pissed... I had the 2010 eng spl... trying to flash roms. No rom would use touch screen. so started over and ened up with a 32 b board now and a perfected spl again.... lol Argh... trying through it again now.
Click to expand...
Click to collapse
Ok, so how did you get the spl changed? and what did you flash that was 32b?
chrys9989 said:
Ok, so how did you get the spl changed? and what did you flash that was 32b?
Click to expand...
Click to collapse
I used Amen ras newest Fixed spl fix 1.33.2010, made my gold card, renamed that file to SAPPIMG.zip, went into Hboot and it flashed without a problem.
I then rebooted into Hboot seeing the new Info.. Didnt look at the 32a/32b part yet so not sure if it happened there.
It then rebooted into whatever rom that file came with (look for Amen ras Fixed spl thread) the rom came up, with no tocu screen. only the track ball worked.
I rebooted and stupidly jumped right into flashing a couple of the new clair builds from king and.. the othe rguy lol. neither had touch support. I then went back to update to manups newest and used the 32a port file, and no touch screen...
I then rebooted and flashed the amen ra rom and rebooted into a Mytouch boot loop... went into Hboot and had a perfected spl and S-on. ARGH.
Just started from scratch again. Im really wondering why i loose touch screen support and why in the hell it say 32b now

[ROM] [TEST, NOT FOR NOOBS] Rogers Sapphire Sense Port. Android 2.1 Sense. [9/15]

Quick throw-together. I highly reccomend one of pershoot's kernels from here: www.droidbasement.com/db-blog
Please use one of those. They're much more efficient than the king kernel i've included.
Features
Friendstream
Flippy clock (from SMOKI X)
King stuff (twitter.com/kingklick92)
Gapps
A2SD
Sense
Stable
Maps
Pretty
NEEDS A BIG EXT PARTITION AND A SWAP.
Good luck!
http://www.mediafire.com/?soscld37b0q6wiz
THIS IS UNSIGNED, IF YOU AREN'T USING CLOCKWORK, YOU SHOULD FIGURE OUT HOW TO SIGN IT YOURSELF. I'LL RELEASE SIGNED VERSIONS LATER.
EDIT YOU NEED A 114 MB SYSTEM FOR THIS VERSION DUE TO A 25MB BOOT ANIMATION, PLEASE USE MTD UNTIL I FIX IT
i got you bro. once i get my son to sleep ill test. you know anything yet? data/cam/wifi/gps etc? if not its cool, thats what tests are for.
ok, just doing this for people who dont want to sift through for the signed version: not signed by me, boot animation not swapped by me, *******there is a green bar at the bottom for status of install on boot note though, even after the bar is full it will still take a second IF YOU HAVE ADB INSTALLED RUN A LOGCAT, AS LONG AS YOU SEE THINGS MOVING YOU ARE GOOD. ********. let it sit for awhile like usual after it loads (20+ min). you also have to input the tmo apns to get svc.
link to signed version of the rom
http://goo.gl/opI3
tmo apn's:
http://goo.gl/bNtU
will post back a working/not working in a min.
i would also suggest not doing the system update that it says is avail once you get data working.
Love this.
Sent from my HTC Dream using XDA App
Is this compatible with a 32B Sapphire? Or would it be, to the best of your knowledge?
opethfan3 said:
Is this compatible with a 32B Sapphire? Or would it be, to the best of your knowledge?
Click to expand...
Click to collapse
yes this is a port from the 32a rom to 32b. its not signed so you can only flash via clockwork right now. clockwork doesnt require a signiture for it to be able to flash. if you use amon_ra just wait. im booting into linux after i post this now that i have my son asleep and will look into what can possibly be trimmed down then will sign and post up after im done.
ok, decided not to mess with anything, i dont use some stuff but others do, its signed and im gonna test now, just got done doing backup on current rom and will post if it flashes.
need to wait, since i have amon_ra.
Allright!! looking forward to this, I could sign the rom myself but ill wait to see how the rom works for you guys and im also waiting for a class 6 sdcard that I purchased a few days ago... anyways, im gonna try it with the class 4 i have right now after you try it and maybe cut some size
i hate clockwork. and it wont sign for me for some reason. idk why.
can someone please sign this so we can flash.
Good luck, guys. Really interested to see if this works.
im really going to enjoy triming this fat lady and mod a few things
anyone able to sign this thing yet?
Can you make a version that doesn't require an ext partition? Im on a mytouch 3g, should be able to handle it.
can't get it to sign (then again this might be my fault) how about first person to get this signed/flashed uploads some screenshots
btw: i'm using the autosigner
I'm downloading and signin... I replace the bootanimation to one less heavy??
p.s. sorry for my english
edit: I'm uploading to mediafire..if it finish in 5 minutes I give the link...if don't... I must go to work..link tonight..sorry
p.s. I've change the bootanimation..20 mb saved
http://www.megaupload.com/?d=EO5X0HBC
Click to expand...
Click to collapse
I simply signed the original file. gl
Download limit is exited
roalex said:
I simply signed the original file. gl
Click to expand...
Click to collapse
People will need the MTD hack to flash this.
asb123 said:
People will need the MTD hack to flash this.
Click to expand...
Click to collapse
I know, it is pretty easy to do it. I leave it to the devs to play with the size.
asb123 said:
People will need the MTD hack to flash this.
Click to expand...
Click to collapse
No, I take off the bootanimation of 20 MB and replace with one of 640kb... and I don't use MTD partition tonight the link..now I'm @ work...
p.s. I'l make a senseless rom
anyone tested it now? i want results; nothing about uploading elsewhere, signing mtd patch etc;
there are enough threads about it. there is a good working signing tool in xda.. search for it as well as tuts for it;
i think this thread should focus on the rom as it is something very interesting and new.
i wont try it at the moment cause i softbricked my phone with mtd patches.
please tell how the rom is...
EDIT: btw i know that this post is senseless concerning the original topic but i just want that this thread stays focused..

Help!(htc hd2)

Hello XDA community, I'm sort of a noob when it comes to advanced things such as radios and kernals etc. I have a rooted HTC Aria S-On running CM7 but that's basically all I know how to do is easy simple things like what I've done to my Aria. But the issue is a friend of mine was trying to update his HD2 to an ICS ROM but (according to him) he wiped everything down to the MAGLDR. Radio, kernal, ROM etc. He basically has no idea what he's doing with it, most experience with this kind of thing he's had is clicking a button to jailbreak an iPod or two. What I'm trying to do is figure out how to get the correct radio and kernal for the phone, and install ClockworkMod recovery and CM9 on it. Any help would be appreciated
follow the guide below, should be what you're looking for. Mind you this is assuming your NAND and not running it from the SD.
http://forum.xda-developers.com/showthread.php?t=1044830
Many thanks man, didn't find that thread during my searches. One more thing, Nandroid isn't installed anymore either, would that be just a simple search for a DL link for the HD2 and install through the USB flasher in the MAGLDR?
yeah it should be, if I'm understanding you correctly...worst case I would just go from start to finish from the guide below so I don't leave anything unturned. Follow this guide before following the the previous one (that one assumes you did this already).
http://forum.xda-developers.com/showthread.php?t=893948
Thanks again, happy I can return the phone without it being a $200 paperweight
lol no problem

Categories

Resources