Related
Hi,
I have installed the latest WM6.5 Build 21725 (http://forum.xda-developers.com/showthread.php?t=513605) on my HTC Touch Pro.
But I have a problem (which occurs on all tested roms) with the lock screen: I lock the device. The lock screen appears fast and is immediately responsible. But when I go to suspend mode (by waiting or pressing the power key) and then let wake up the device, I have always to wait a lot of time until the lock screen is responsible to unlock the device. This is very annoying and I want to fix that "bug". Can anybody help me?
Same here. And does anyone know how to remap one of the softkeys to lock the screen? Instead of have to push start >> lock?
i had this with a 6.5 rom
what i did was after i turn backlight on i quickly press the hangup buttton and then the slide works fine
this may have to do until the rom becomes more stable
-PiLoT- said:
i had this with a 6.5 rom
what i did was after i turn backlight on i quickly press the hangup buttton and then the slide works fine
Click to expand...
Click to collapse
Thanks for your tip, but it doesn't work
Sorry this was gibberish
then im sorry i cant help
all i can do is ask youve tried this on a 6.1 based rom
this is a knowing trouble because of the beta
Hey pilot... this is a real kick on the ass cause nobody answer this many times users needs a third party app to lock their devices... i didnt lock my device... i just turn it off and disable all the buttons you see... its like a locked simply and crapy phone function.
well i know it looks good que but the problem i had was after a while in standby the buttton would shift to any side however i know the phone wasnt crashed due to the little arrow animatiuons kept going as normal all i did was tap the phone down button and then it worked as it should mind you this was davie ducks v8 on the hd
I figured out that the lock screen is immediately responsible if you set a password. But I don't want to slide AND then type a password
just slide the time bar at the below screen before slide the lock :| i got this bug after upgrading into a 6.5 rom :| now it's done by myself :">
remember at the time of the OPs question 6.5 was very buggy
a lot of the latest releases are a lot better
Laggy
I also have this laggy problem when clicking the right key to bring up unlock screen, takes a while for the unlock screen to appear.
Was looking at ThrottleLock which looks good, but not compatible with 6.5.
I hate iphones so don't want S2U2 !!
Looking forward to update
Correction
Correction, just tried an older version of throttlelock app 0.6, and it works with windows mobile 6.5
Is there some way to just turn the lock screen off? I hate how slow it is on my backup phone, an LG KS20
You may have it in settings-personal, if not, go to HKLM\software\microsoft\shell\lockscreen, and change 'enable' from 1 to 0. Then, you'll have to old-style lockscreen. If you want to see the lockscreen settings applet, then change 'ShowLockScreenPicker' from 0 to 1. You may need to soft reset (but you may not).
Farmer Ted said:
You may have it in settings-personal, if not, go to HKLM\software\microsoft\shell\lockscreen, and change 'enable' from 1 to 0. Then, you'll have to old-style lockscreen. If you want to see the lockscreen settings applet, then change 'ShowLockScreenPicker' from 0 to 1. You may need to soft reset (but you may not).
Click to expand...
Click to collapse
Thanks Ted! Works perfectly, for some reason the Lock Screen settings applet won't show, but that's not important as the first registry key solves my problem.
Yeah one way is to set back original WM5x/6/6.1 LockScreen but I have solved it another way... Maybe you have noticed that the new WM6.5 lock screen has delay ONLY on first run so what about put a shortcut to "\Windows\Startup" to lock device on startup (http://www.vijay555.com/?Releases:VJDeviceLock - working also with WM6.5)? I mostly don't need to use the device in first seconds after startup so everything necessary can load to memory and then after unlocking my device is everything relatively fast ;-) BTW you can set lockings with tool named Smart Lock (http://forum.xda-developers.com/showthread.php?t=505032).
bkf1 said:
Yeah one way is to set back original WM5x/6/6.1 LockScreen but I have solved it another way... Maybe you have noticed that the new WM6.5 lock screen has delay ONLY on first run so what about put a shortcut to "\Windows\Startup" to lock device on startup (http://www.vijay555.com/?Releases:VJDeviceLock - working also with WM6.5)? I mostly don't need to use the device in first seconds after startup so everything necessary can load to memory and then after unlocking my device is everything relatively fast ;-) BTW you can set lockings with tool named Smart Lock (http://forum.xda-developers.com/showthread.php?t=505032).
Click to expand...
Click to collapse
The problem with the 6.5 lockscreen is that it kills gwes.exe (at least in my experience). Do a soft reset, open up a task manager and look at gwes.exe. With dotfred's, I'll start at maybe 15 MB, and as soon as I open the lockscreen (I get the delay, too), the gwes usage jumps by about 6 MB, and none of the ram is released. It makes my device buggy over time. Gwes.exe is bloated enough with 6.5.3 roms, you really don't need the lockscreen killing it like that.
I don't know if it's an issue on a stock rom, but the cooked ones have problems. In the 6.5 cooking thread, Da_G said a while ago that it had to do with how most kitchens compile roms. They compress all files the same way, and ignore flags in the dsm's that say whether or not a file should be compressed. He's said that cooking an uncompressed rom fixes the problem. I've tried making a cab of the lockscreen and running it that way, but I still get the initial delay and the 6 MB ram-tax on gwes.exe, so whatever is breaking the lockscreen during cooking because of the forced compression isn't in the lockscreen packages. Anyway, the lockscreen is cool, but I personally hate what it does to gwes.exe, so I don't use it.
What your saying about cooked vs. stock is likely correct, as I had briefly owned an HTC Pure (ATT branded Diamond 2), which shipped with 6.5, and there were absolutely no delays with the lock screen. On the other hand, I still haven't flashed 6.5 onto my X1, so I don't know if its just that my LG can't handle the lockscreen with its 400mhz qualcomm.
I'm currently using S2U2 to blank screen when connected, which works fine, and I use Cookie's Home Tab 1.8.5 for all other times.
I think it's memory wasteful to use S2U2 just to turn the screen off during phone calls, and didn't know if anyone knew a way that I could set CHT to turn the screen off, or knew another application that used less memory to perform the same function that S2U2 does.
I don't use S2U2 for unlocking all the time because I like the looks and functionality of CHT's lockscreen better, but I haven't seen a way to do connected/dialing locking with it.
Thanks in Advance.
Jaeden09 said:
I'm currently using S2U2 to blank screen when connected, which works fine, and I use Cookie's Home Tab 1.8.5 for all other times.
I think it's memory wasteful to use S2U2 just to turn the screen off during phone calls, and didn't know if anyone knew a way that I could set CHT to turn the screen off, or knew another application that used less memory to perform the same function that S2U2 does.
I don't use S2U2 for unlocking all the time because I like the looks and functionality of CHT's lockscreen better, but I haven't seen a way to do connected/dialing locking with it.
Thanks in Advance.
Click to expand...
Click to collapse
try touch in call screen tweak
turns off screen in vertical position, turns on screen in horizontal. uses g sensor. works fine in touch diamond 2
Where is that tweak located at? Is it in Cookie's? or something I have to download?
Jaeden09 said:
Where is that tweak located at? Is it in Cookie's? or something I have to download?
Click to expand...
Click to collapse
yes, u need to download it. u can find it using search utility at this site.
Very specific question, and I have search everywhere for an answer.
I know it's a little lengthy of a post, but I tried to be as detailed and specific as possible.
I have android on HD2.
I need the pin lock to kick in and lock the phone completely after a set amount of time (let's say 5 minutes of inactivity). What I mean is, the only way to access the phone is by entering the pass-code or by complete hard reset only. This is for security reasons in case I loose the phone, or if I leave it somewhere unattended- at my office desk for example). I DON'T want the pin lock to kick in every time I turn off/on the screen, because that would be very inefficient and time consuming.
On the other hand, I need the slid lock to kick in within seconds after turning off the screen (so I don't activate the phone every time I touch the screen, or every time I press on a hardware button by mistake, when the phone is in my pocket).
Lastly, I am not looking for an app lock program. I do not need an a program that can prevent individual apps from running.
Before you answer:
Android 2.2 only allows to
1) activate and set time delay for both (pin-lock and slide-lock) at the same time interval. (There is no option to set delayed activation of pin-lock independent from slide-lock. For example if I set to activate the lock in 5 minutes, than both the slide lock and pin lock will kick in after 5min. If you turn off the screen and press on a button inadvertently while it is in your pocket you will be activating the phone and consequently make random calls, activate programs and so on...)
2) disable pin lock and keep slide lock activated. (but than, you than don't have the security of the pin-lock).
3) disable pin-lock and slide-lock altogether
Windows mobile behaves in a similar way, but using S2U2 fixes these issue.
I am using HTC HD2 with Android HyperDroid CyanogenMod 6.
I'd rather see this baked into CM myself, but this feature is actually standard in HTC Sense-based builds.
Anyone? Someone?
Am I the only one who thinks this is Extremely useful and basic functionality?
Also looking for a solution on this. Have you maybe found one?
Running CM 6.1.1 on HTC Desire Z
Greetings!
Hi, on HTC Desire (HD & Z) you can set the lock time out in the "lock" menu independently of the screen on/off setting
Does anybody know of a fix for e.g. Galaxy S
any luck, any help?
You can use a widget to enable or disable pin lock, and have the auto lock set on a low time.
Sent from my HTC Desire using XDA App
tincmulc said:
You can use a widget to enable or disable pin lock, and have the auto lock set on a low time.
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Can you recommend any specific apps that do that?
(surprisingly, this is still not a built in feature in the native OS).
Just curious, how many of you guys use the lock screen? I for one, since the day I bought my inspire, disabled the lock screen. I simply have no use for it.
How about you guys?
I use the app "No Lock", works perfect for me.....
Bounce between Widgetlocker and the Sense 3.0 lockscreen. She lives in my pocket and needs to be restrained when I'm not paying attention to her. Touchscreen & all that.
Sent from my Inspire 4G using the power of the dark side.
I bounce around with mine. Sometimes I like it, sometimes not. But I same as you use no lock to rid myself of it. Most times I don't feel i need a second screen to go through just to get to my apps and stuff
I have the rotary unlock and a PIN after that. I figure that with my phone rooted someone who doesn't know what they're doing messing with settings could really cause problems and some apps have my credit card info so i like to have it locked, it's pretty quick to unlock.
Disabled it the hour I got it and never looked back...
I use Executive Assistant as the lockscreen and disable the regular one
I never use stock 2.2 sense lock, only 3.0. I like widgetlocker, but I'm running cm7, so i use default on the lens setting. looks great.
swatcop1 said:
Just curious, how many of you guys use the lock screen? I for one, since the day I bought my inspire, disabled the lock screen. I simply have no use for it.
How about you guys?
I use the app "No Lock", works perfect for me.....
Click to expand...
Click to collapse
I love it. I use the sliding tab lockscreen with the four tabs. I use it quite often.
I definitely use mine (Widgetlocker). I place everything I might want/need to see on it. Currently I have an icon for the app Screen Off and Lock, and the following widgets: Watchdog, CurrentWidget, SetCPU, Next Alarm, and MissedIt (unread counts). I disabled interactions for everything except the icon for Screen Off and Lock (I set the timeout for the lockscreen to be 30 seconds, giving me plenty of time to look at my device information. I use the Screen Off app to turn it off as soon as I'm done).
Hi
Apologies for not having this in the ARHD forum but I dont have the 10 posts yet to be able to post in developer forums.
I have come across and issue when using ARHD 6.2.1 and any app to turn off the lock screen such as No Lock, No Lock Screen or Delayed Lock.
Generally I would have the lock screen turned off (sense ring and security pattern) when I am at home and then turn it on when out or at work, but with this rom, or it could be ICS itself, whenever the lock screen is turned off and I hit any notification in the notification bar, the phone locks, I have to swipe the ring, input the pattern and then the screen is locked from then on, even through the no lock widget shows otherwise. It will then stay locked until I hit the no lock widget twice.
I have tried every no lock type app available, go locker, magic locker and none seem to be able to work around the issue. The description of Delayed Lock says this "Since ICS there seems to be an issue when using the "hide lock" method: When clicking on a notification, the lockscreen might be shown. Please use the "deactivate lock" method instead!" but this doesnt work either.
Has anyone else had the same problem and found a work around? Does anyone know if these apps work with Stock ICS on the galaxy nexus for example?
Any thoughts much appreciated, thanks.
There is an option in the ROM settings (in the security section) to disable to lock screen without the need for secondary apps.
It works like a charm.
You can switch back and forth between locked and not locked quickly and easily.
Hi, thanks for the quick reply. Do you mean settings\security\configure lock screen?
Thats the only option I can find in my ROM and if you configure the lock screen to off here, you have to re input it again to turn it on. Hardly quick and easy. It also doesnt bypass the lock ring which the secondary apps do, but maybe I'm missing something or ARHD is missing something from ICS.
What ROM are you running?
Settings/security/screen lock.
Its the top item on the menu in the security screen.
Choosr 'off'. Im on ARHD too and I use this setting so I guarentee it works. (Of coure I have Sense removed so maybe that is a factor)
It takes 2 seconds to set or disable the lock.
Sent from the Delta Quadrant using a subspace relay array.
Thanks skipjacks, ahh youre not running sense, I guess that's the difference as the settings are sensified.
What did you use to remove sense? I see there's an ahrd mod to remove HTC sense lock.screen that I can try.
dombuz said:
Thanks skipjacks, ahh youre not running sense, I guess that's the difference as the settings are sensified.
What did you use to remove sense? I see there's an ahrd mod to remove HTC sense lock.screen that I can try.
Click to expand...
Click to collapse
Thats what i used
Sent from the Delta Quadrant using a subspace relay array.
Oh right, back to square once then. Because I flashed that last night and while it gives me the (less functional) ics lock screen, it doesn't change any of my settings so I still can't change the lock screen as you suggest.
Can you tell me what phone and arhd version you have? Do you have everything else sense still on the phone?