Database Info

Standard Battery Test

As in SKtools, we all have a common pattern to check some parameters in our devices, there must be a procedure, we all could use, to test the battery drainage and performance.
I know battery status does it in some aspects, but it depends on the apps running behind and it doesn't make statistics.
So that's it. A benchmark
THanks

SKTools don't have this feature... However, somewhere here was a small cab with a tool, witch log the battery drain and remain every 5 seconds or what else you configure. I asked allready bevore for this one, but nobody answered what tool it is and where to find it. Maybe here...
I have an other problem of this kind: I use BatteryStatus TodayPlugIn and it allways shows a batterydran of about ~180mW. A week ago I tested OMAP-Feature of it, overclocked it to 201Mhz and the batterydrain raised up to ~400mW so I turned it off again, but the drain of ~400mW keeps. Subjective it seems that the batterydrain is again ~180mW but it shows even after an softreset ~400mW.
Is thisa n bug of BatteryStatus? Hof to fix it again? Thx!

Igor Godienko's Battest?
Maybe you were looking for this app?

2241Alexanders said:
Maybe you were looking for this app?
Click to expand...
Click to collapse
thank you very much! I was looking for something standard to compare with
owe you one beer!

2241Alexanders said:
Maybe you were looking for this app?
Click to expand...
Click to collapse
Thanks a lot! Thats exactly what I searched for!
Any ideas about my BateryStatus problem?

PanicMan said:
SKTools don't have this feature... However, somewhere here was a small cab with a tool, witch log the battery drain and remain every 5 seconds or what else you configure. I asked allready bevore for this one, but nobody answered what tool it is and where to find it. Maybe here...
I have an other problem of this kind: I use BatteryStatus TodayPlugIn and it allways shows a batterydran of about ~180mW. A week ago I tested OMAP-Feature of it, overclocked it to 201Mhz and the batterydrain raised up to ~400mW so I turned it off again, but the drain of ~400mW keeps. Subjective it seems that the batterydrain is again ~180mW but it shows even after an softreset ~400mW.
Is thisa n bug of BatteryStatus? Hof to fix it again? Thx!
Click to expand...
Click to collapse
It is a matter of refresh: Sometimes it hagns with an outdated data. Try to change refreshing time to a lower value in configuration inthe second statement called indicators.

TouchFlo Cab File

I installed the touchflo, it gets installed , but doesn't start etc. it needs somebody to get it working ,it doesn't seem all that far fetched like wm5 or wm6.it needs somebody from this forum to get it going . like they have done it on prophet, wizard,artemis, with some tweaking and alteration of biotouch file etc.cmon give some respect to the forgotten hero who started this transition from window mobile of being brick sized pda's to mainstream phone

Where did u download TouchFlo,cab?

it's all over, just download from these forums , it will be there in one of the wizard, trinity , prophet threads where they tried and succeeded ah somewhat , creating the touchflo work on their devices . u need to be logged in to see the link

touchflo cube
ATZatz said:
Where did u download TouchFlo,cab?
Click to expand...
Click to collapse
here it is !!!

does the touchflo worke on o2 aom life?
i got the windows mobile 6
and i heard abt this and its amazing
so is there a way to make it work on it?
i downloaded the cab file and installed it but it doesnt open

if anyone could get this to work on the magician it would be even better than WM5 or WM6

TouchFlo on Magician
I installed GoodWin and FunContact from Vito Technologies. It´s a mix from TouchFlo and iphone and works fantastic. I now returned to my Magician and will sell my Charmer with WM6, it is also good, but horribly slow.

hubie53 said:
I installed GoodWin and FunContact from Vito Technologies. It´s a mix from TouchFlo and iphone and works fantastic. I now returned to my Magician and will sell my Charmer with WM6, it is also good, but horribly slow.
Click to expand...
Click to collapse
absolutely agree that Goodwin and FunContact is worth installing on magician or wm2k for that matter...IMO Vito should upgrade Goodwin to have more interactive home screen...now its seem that you have to scroll a lot because everything is in one page...

I didin't like this Goodwin, on my Magician it "half-worked", the signal strength and battery meter doesn't work and the button slide lock too, just when I start the program it appears and then never more. But I agree that the User Experience is fantastic. I am using the 2.03 WWE modified ROM.

Goodwin etc.
It is correct that the batterymeter and the signal strength don´t work, but with the lock-button i think you make a mistake: click on it with stylus or finger, hold it and drag it from the left side to the right side of the display, and the device will be unlocked so that you can work with it. I think batterymeter isn´t as important, i took the Power-button to Favorites to reach it easily for controlling the battery status. Another effect of the "half-working" is, that the timer to controll the testing period doesn´t work, too! So, for devices with WM2003, it´s Freeware!

hubie53 said:
It is correct that the batterymeter and the signal strength don´t work, but with the lock-button i think you make a mistake: click on it with stylus or finger, hold it and drag it from the left side to the right side of the display, and the device will be unlocked so that you can work with it. I think batterymeter isn´t as important, i took the Power-button to Favorites to reach it easily for controlling the battery status. Another effect of the "half-working" is, that the timer to controll the testing period doesn´t work, too! So, for devices with WM2003, it´s Freeware!
Click to expand...
Click to collapse
Ok, it is locked just when I stard Goodwin, but how to Lock again? I was using Slide2Unlock very similar that locks the PDA everytime I Power Off the phone to stand-by mode, with Goodwin nothing happens when I power off and on.

why don't you guys try this out. just modify the includede ini file to match your shortcuts.
http://forum.xda-developers.com/showthread.php?t=358102

hi i download the fun contact and i really like it is there a place where i can download the serial?

hubie53 said:
I installed GoodWin and FunContact from Vito Technologies. It´s a mix from TouchFlo and iphone and works fantastic. I now returned to my Magician and will sell my Charmer with WM6, it is also good, but horribly slow.
Click to expand...
Click to collapse
i will buy the charmer off you?/?

hubie53 said:
I installed GoodWin and FunContact from Vito Technologies. It´s a mix from TouchFlo and iphone and works fantastic. I now returned to my Magician and will sell my Charmer with WM6, it is also good, but horribly slow.
Click to expand...
Click to collapse
Thanks for testing man. I'll install it right away on my O2 XDAII mini.

edjorge212 said:
hi i download the fun contact and i really like it is there a place where i can download the serial?
Click to expand...
Click to collapse
dude.. it's less than $20..I say just pay for it man..if u ever tried to write a program for a PPC2003 phone u'll know what a b!tch it's like...these ppl have put alotta effort into makin it work and the least we can do is show our appreciation... afterall.. this ain't TrashWare like a dodgy virus remover that installs the viruses in the "free trial" version just so u can pay them $20 to "get rid of it".. this is pure sweat and hardwork that someone's put in dude...and the lack of technical docs from M$ doesnt help either!
Otherwise.. dunno if anyone's mentioned it before, but a friend of mine intro'ed me to PointUI .. Alpha version just came out for PPC2003.. and it looks friggin schweet =) I'm usin it on my Magician.. definitely worth a look.. so far it's still free coz it's Alpha version

WM6.1 For Wizard OS 5.2.19209 buit 19209 WWE

Delete
Happy every day

Delete
Happy every day

Thanks, I have been waiting for this.

Pumpiron579 said:
Thanks, I have been waiting for this.
Click to expand...
Click to collapse
no HTC_Album
HTC X Button work on my Phone!

Downloading now Thanks!
Ok... Downloaded and flashed it, everything went smooth. Played around and found two things.
1) The calculator font is too dark, you almost can't see the numbers you're typing and when you press "." and other buttons some kind of mask flashes.
2) The camera button don't work, give-me invalid link and there is no camera to associate it to in "buttons"
Other than that all seams good.

Another thing... there is a error on the camera app when you try to use picture themes. I guess you deleted all the themes to save space but you need to leave at least one so we won't get this error.
This one is just a cosmetic error: on the HTC today, when you change the tab settings and let's say you remove the audio manager and put the profile selector the icon stays the same.
That's it for today... I need some sleep now. =)

LGSilva said:
Another thing... there is a error on the camera app when you try to use picture themes. I guess you deleted all the themes to save space but you need to leave at least one so we won't get this error.
This one is just a cosmetic error: on the HTC today, when you change the tab settings and let's say you remove the audio manager and put the profile selector the icon stays the same.
That's it for today... I need some sleep now. =)
Click to expand...
Click to collapse
sorry I Forget！
TDOA，This is the day we！
I have repaired，Please update rom！

nice one
nice rom u made but with above bugs, so try to solve them as quickly as possible.
thanks & best regards

Very nice! are there any other bugs? Is the problem with the camera away?

Thanx.
are you sticking around on the forum? I hope so. your last release was super. I'm sure this one will be just as good.

Having some problems, One is that Live messenger will not open up, I had to install an older one from my desktop. Word recognition is not working. It responds very slowly. I changed the page pool to 8mb, and installed Battery status.
The battery is very good in this rom. I have been running this for 5 hours now and it is at 87%. That is running push mail, setting everything up, Using Wi-Fi on and off, using SMS, Talking on the phone for about 20 min.
Overall, it is a Great Rom

Sweet bro!!! This works like a charm.
But does anyone have any idea about getting Java apps to run on it? Namely Opera mini 4....

no java
zz_3.14_zz said:
Sweet bro!!! This works like a charm.
But does anyone have any idea about getting Java apps to run on it? Namely Opera mini 4....
Click to expand...
Click to collapse
go to www.operamini.com
download the 4.1 beta
open java engine
click install/local
that's if this rom had java.
noonski has a cab for esmertec. I posted his file in the atachment. I figure everyone is going to want it.
BTW I just installed the cab and am posting from opera mini.
NOTE TO ANDY: no internet connection through activesync. is this my problem, or can anyone confirm that it actualy doesnt work.? (it might just be my problem i dunno)

internet is workin through USB normaly , great rom lags a lil sometimes still need more time for testing other wise its great.
one thing -- anyone knows why clock changes to windhoek back when it change it to my country time, or how to uninstall some programes out of this roms to install versions i have or i need.
keep the good work bro and thanks very much for this rom

no mms? pics not showing up?
I couldnt get any mms pics to show up, just a black screen with no message details or attachments, all blank? cant check sent mms messages either, again doesn't show picture or attachments just size and anyone else run into this?

Pumpiron579 said:
Having some problems, One is that Live messenger will not open up, I had to install an older one from my desktop. Word recognition is not working. It responds very slowly. I changed the page pool to 8mb, and installed Battery status.
The battery is very good in this rom. I have been running this for 5 hours now and it is at 87%. That is running push mail, setting everything up, Using Wi-Fi on and off, using SMS, Talking on the phone for about 20 min.
Overall, it is a Great Rom
Click to expand...
Click to collapse
Would you please advise the version of the IPL/SPL and Radio ROM you are using with this 19209 ROM? Thanks.

S.V.I said:
go to www.operamini.com
download the 4.1 beta
open java engine
click install/local
that's if this rom had java.
noonski has a cab for esmertec. I posted his file in the atachment. I figure everyone is going to want it.
BTW I just installed the cab and am posting from opera mini.
NOTE TO ANDY: no internet connection through activesync. is this my problem, or can anyone confirm that it actualy doesnt work.? (it might just be my problem i dunno)
Click to expand...
Click to collapse
Sorry, there may be problems, I will repair! We can provide the solution? Thanks！

hey, whats going on... why isnt this ROM working for me? im new to the flash game and I want WM6 on my wizard. I did the walk through tutorial to the T but now I want to install WM6, everytime I try to install this program with the
"XP rom update" , it shows the installation screen and goes through the process as usual, but at the end of it, I still have WM 5... whats going on? what am I doing wrong?

clia said:
Would you please advise the version of the IPL/SPL and Radio ROM you are using with this 19209 ROM? Thanks.
Click to expand...
Click to collapse
my Phone G3
IPL/SPL 2.26
Radio ROM 02.61.11

throwback1718 said:
hey, whats going on... why isnt this ROM working for me? im new to the flash game and I want WM6 on my wizard. I did the walk through tutorial to the T but now I want to install WM6, everytime I try to install this program with the
"XP rom update" , it shows the installation screen and goes through the process as usual, but at the end of it, I still have WM 5... whats going on? what am I doing wrong?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=298613

Windows Phone 6.5 < Thanks MietasSR >

Hi,
I must say I have been pretty impressed the way this forum has been run by you fellas. I get to learn a lot of things in these pages.
I have installed the new Windows Phone 6.5. Below is the link to it.
http://rapidshare.com/files/211585077/RUU.7z
All the credit goes to MietasSR who ported this ROM to the Tornado.
I think the ROM is quite stable and is safely usable. I really loved the Zune interface ( a.k.a Sliding Panel Interface ) and so I am glad now . It is still faster than any of the Standard ROMs I tried on my device but a bit slower than the excellent Kamikadze's RC7 WinMo 6.1
NOTE:There is no camera app in this. As it is unnecessary for me, I don't care. And for those who don't know how to unlock, just press the Home key for long until you get a cursor and then use it to unlock. You can return to the classic style of unlocking ( left soft key and 0 ) by going to Settings>Lock>Display and choosing the Windows Classic option.URL

anyOne tested it ?

This ROM is in this thread with experiences .

Ok , Downloaded ,
Installed Without problem on my Imate Sp5M .
Not as Good as 6.1 ,
Speed is not also Too Good , But if Use OmapClock then it become Good,
There are some settings that After install You should Do
like
Enable Classic Lock ,
In power Option Disbale auto Device off
Etc
and i install TCPMP and i have installed the smartphone version and it is installed as PPC version ,
mean i must enable the Cursor for using it , ( can be use with hot keys)
overall this release is Compromisable , Need Improvments
The Most i like , it was Its Theme , that have a Awesome look

also The signals come 0 after every few minutes then takes few seconds to go back to 100%

Improvements.
ibnefahim said:
Ok , Downloaded ,
Installed Without problem on my Imate Sp5M .
Not as Good as 6.1 ,
Speed is not also Too Good , But if Use OmapClock then it become Good,
There are some settings that After install You should Do
like
Enable Classic Lock ,
In power Option Disbale auto Device off
Etc
and i install TCPMP and i have installed the smartphone version and it is installed as PPC version ,
mean i must enable the Cursor for using it , ( can be use with hot keys)
overall this release is Compromisable , Need Improvments
The Most i like , it was Its Theme , that have a Awesome look
Click to expand...
Click to collapse
True. This needs improvement. The work was incomplete and the "chef" MietasSR clearly specified that. its working satisfactorily for most uses. I hope anyone else could continue the excellent work that he started. I am willing to learn and do it too, just need the packages so that I can cook a new ROM. I hope I can find the details through Google and anyways this forum is of great help too. I didn't observe the signals problem you referred to.

Guys i think that most of the users and me ofcource want to see a WM6.5 ROM for our beloved Tornado
But why you have opened a new thread?

Re: Why a new thread?
Innersense said:
Guys i think that most of the users and me ofcource want to see a WM6.5 ROM for our beloved Tornado
But why you have opened a new thread?
Click to expand...
Click to collapse
I opened a new thread as I wanted other people to know that there is already a working 6.5 ROM for Tornado. The link to it was buried in a thread which had a discussion about porting 6.5 to Tornado and multiple requests for the same. Normally there is a new thread for a new ROM and wherein users can post queries, comments and suggestions.

Hi,
I do not have a kitchen for this rom anymore. Please do not ask for this.
Best regards from Poland,
MietasSR.

please help....
i have installed this rom at my qtek8310.
installed applications at my storage card, 1gb mini sd.
problem is, if i turn off the phone, turn it on, the application is changed to white windows icon and the application is not accessible anymore.
what went wrong?
how can i correct this.
please..... i love the ROM.
many thanks!

Loose connections
natividad said:
please help....
i have installed this rom at my qtek8310.
installed applications at my storage card, 1gb mini sd.
problem is, if i turn off the phone, turn it on, the application is changed to white windows icon and the application is not accessible anymore.
what went wrong?
how can i correct this.
please..... i love the ROM.
many thanks!
Click to expand...
Click to collapse
Try removing the storage card and putting back again. I too faced this problem then I figured out it was because of loose connections. Just make sure that the card sits properly in the depression and lock it in properly before putting the battery.

How to close spontaneously.

hey .. have problem with link .. only for premiun user ... mirrors ??
ha ... its professional or standar ??
please XD thkns

kvnxp said:
hey .. have problem with link .. only for premiun user ... mirrors ??
ha ... its professional or standar ??
please XD thkns
Click to expand...
Click to collapse
It is Professional.
This version is of an earlier build and misses on a few areas.
Look for MeitasSR's 23016 build 6.5 ROM in this forum.

HTC Touch HD Problem

Guys,
I need your help. My HTC Touch HD cannot initiate the TouchFlo (3D), and I cannot view it the way it should be at all. I don't know what happened but it just doe sthe following when you restart it:
It will go to the TouchFlo (3D) Page and the message saying "Tap Here to Launch TouchFlo (3D)
I tap and it keeps saying Launching TouchFlo (3D) but it never does that
I can access the mobile from the Start Menu but I want my Touch HD Back to the way it was before.
Anybody has any suggestions please post them or email me at: [email protected]
thank you guys
Yaser

Save PIM data (ex with PimBackUp or similar) then make an HardReset: HD off, Hold VolUp+VolDown then one click on PowerOn Botton.
D'rath
PS: The process erases all your data but solve the SW problems

Wait, hard reset is the last solution!
Have you installed an application or any graphics drivers? New rom?
If so then you could try to uninstall it and see if the problem is solved!
Sometimes I had this when installing bad drivers.
You could try to install these drivers. (at least before doing a hard reset)

helio is correct,
HR is the last resort (although it will of course fix the problem) as you wont understand what has caused the underlying problem, you will then install the same software/apps and end up with the same issue.
Look at what you have have installed recently, or changed manila files. An incorrect change if playing with a manila file will cause touchflo not to start.

Thanks Guys for your Comments and Recommendations, I really appreciate that,
I need to know how to Backup the PIM Data. I found a file with pim next to it and I already saved it on the Storage Card. Is there any other PIM File(s)? I also listened to you onnot doing the Hard Reset, and removed every software I have doubt about or had installed recently. But the problem still presists, TouchFlo (3D) Cannot launch. Help and thanks again.

Use this app, zip below, to back up your data (emails, contacts etc). The app is simple to use. Word of warning if you use Exchange to sync email and contacts, be CAREFUL....restoring your contacts and then syncing will duplicate all your contact entries (i know because i did it and ended up with 2000 contacts!!!)
You dont say what you had installed, just that you had removed them. Purely unistalling may not fix the issue if a registry change has not reversed.
Have you been playing with any manila files, or deleting anything you shouldnt be? Have you been playing with the registry?
If you really cant analize what you have done and without much more info, you have to decide if the HR is the only available option to you (ie you want the quick fix).

Dear Timmymarsh,
thank you for all you've done for me, I really appreciate that. I am sorry I did not mention what I did. What I have done is try a new ROM, I think it Was WWE but which one I don't remember. I downloaded a bunch of files from this site, thinking they would work without testing them first. But they did not turn out to be what I was looking for. I downloaded the Choco Clock, Sygic GPS, and others from the Manila....and other developers but when I unzipped and installed them they did not work for some reason. So I just deleted them, the thing is I know I should have uninstalled them first. But for some reason I just can't even find the files created by these add-ons or applications. No, I did not touch the registry at all. I am not a Software Man, obviously you guys are amazing in this stuff, I am more into infrastructure if you have any uestions about Wireless Network or Physical Security let me know. I am trying to learn more about this Mobile and want to be able to utilize it to the fullest. Thank you again. For this time I think I am going with the HR so I can erase everything that I downloaded and did not setup Properly, then I am going to install only trusted add-ons and softwares. thanks.

No probs my friend, its what we are here for yes
As for what you have done, its always best to uninstall first, just deleting causing reg problems hence the issues you are now facing. I would say on this occasion HR is your best bet. Best bit of advise i can give you is, install one app/software, test and if there are no compatability issues then add another, if there is then at least you know to safely remove by unistalling that app.
Have fun, the HD is a brilliant bit of kit and can be expanded/modded vastly

flashing error
hey guys i just every time i have tried to update my rom (cooked) it has always given me the error 240 FILE OPEN- this is really annoying and have tried alot to fix it, any ideas?
I followed this guy known as widget kid on youtube who did a run through and it still doesnt work, i just updated to 1.56 olinex Hspl which fixed my grpahical problems but still doesnt support me flashing other roms such as miri or energy pheonix!
HELP!
regards JP

Jpradella said:
hey guys i just every time i have tried to update my rom (cooked) it has always given me the error 240 FILE OPEN- this is really annoying and have tried alot to fix it, any ideas?
I followed this guy known as widget kid on youtube who did a run through and it still doesnt work, i just updated to 1.56 olinex Hspl which fixed my grpahical problems but still doesnt support me flashing other roms such as miri or energy pheonix!
HELP!
regards JP
Click to expand...
Click to collapse
JP this is a little off topic, but have you followed the many good guides in the blackstone forum and where are you running the ruu from, make sure its on the root drive not in many folders. You using XP?
PM me please once you have read this and i will delete this post to keep thread clean.