i have no problem uploading all my information to site however when i flashed my phone and tried to download my contacts it get to 60% and freeze's everytime. tried reinstalling nothing works. is there anyone else with this problem? if so please help. also are ther eany good backup programs i could get for free so i dont even have to use my phone. kinda getting tired of flashing my phone every 5 days with nfsfans rom updates ( not that i dont love em keep, up the super work NFSFAN ).
Related
Was installing duttys rom when my anti-virus program started. Update failed and since then all I see is the tri-colour screen. Sometimes I can get the rom updater to recognise my TyTNII but it will not continue to upgrade. Any suggestions. Have tried mtty1.42 but it doesn't seem to have a usb port option, have tried hard reset etc with no luck. Any suggestions would be greatly appreciated.
An update, I have tried several rom updates since, most get to the stage where the progress bar is shown and the stop. The HTC update to revert to shipped rom gets to 1% and then tells me that this rom is not suitable for my pda!
How about some more information...
What is your Tytn II - Tilt or HTC?
What Rom was on it before you tried upgrading?
What Radio was on it before you tried upgrading?
What version of Duttys did you try to flash?
Did you upgrade to HardSPL before you tried flashing?
This should enable someone to begin trying to unbrick your phone.
Also DO NOT USE MTTY unless you know what you are doing - it can seriously kill your Tytn if used incorrectly. Wait for GSLEON3 to swing by before trying this - but he's very busy at the moment helping others unbrick their toys so you may have to wait for a while.
If you had an original rom/radio from AT&T or HTC it shouldn't hurt trying to download an original rom and try to flash - preferably using your SD card.
Also, while you're waiting for someone to help, have a good read through the Kaiser Wiki (in my signature) before trying anything else.
what are the steps that u take? let us know if u are missing any
HTC TyTN 11, Was using Q-mobile 1.2 but couldn't install tom tom navigator 6, don't know what radio it was using because i hadn't got that far. Was trying to flash Dutty's 6.1 and I had run jumpspl from device because I got the white screen when I treid to run 1.93 so installed 1.56 to pda and ran it. this worked to insatll Q-mobile this morning.
Hope this helps!
what are the steps that u take? let us know if u are missing any
Try to reset pda keep getting tri-colour, attach usb and usb shows at base of screen. When i try to install rom The problem in my second post occurs. I cannot hard reset device to anything other than the tri-colour
Thanks for your help, I tried one of the roms indicated and it worked! I have spent so much time reading various wikis and downloading files. I'm not entirely sure why it worked this time but I'm not about to ask questions! Thanks again!
OK, now you've got your phone working again, make sure that you get HardSPL installed before you try anymore flashing.
ok i was installing KAIS_Radinly_0.26.07.06_CustomRUU and it froze at 96% and now my phone is bricked!! every time i restart the phone its stuck at the RED GREEN BLUE and WHITE screen.. i tried using mtty but then im not trying to mess my phone up any more. i dont understand how to fix it.. if i download a new ROM and put it on my SD card then how do i read it with my phone? sorry guys, im a noob at this as you can tell..
nm guys. i just ran the new rom and it worked! haha sorry for posting too quick!
okay i have one problem after fixing it. i downloaded the TEST rom for the ATT tilt and now every time i reboot my phone it says 'TEST ONLY. NOT FOR SALE.' how do i get rid of this? when i installed a new rom it still says this and i even tried hard resetting my phone but it did not reset anything to factory settings. it just reloaded the rom that i last had!
xmooglex said:
okay i have one problem after fixing it. i downloaded the TEST rom for the ATT tilt and now every time i reboot my phone it says 'TEST ONLY. NOT FOR SALE.' how do i get rid of this? when i installed a new rom it still says this and i even tried hard resetting my phone but it did not reset anything to factory settings. it just reloaded the rom that i last had!
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=KaiserFAQ
your answer is in there
Ok i have been having trouble with my phone for the past few weeks. It started with pimbackup not wanting to open then esclated into things like my phone getting stuck booting. Usually im able to fix any issues by ether flashing a new rom, hard resetting, and if nether of thoughts two work flashing the factory ship rom. But recently non of the above work at all. While this idea is WAY out there im wondering if mayb the memory on my phone is going bad? Rom flashes always go through but booting and installing almost never go through on the first try even with a hard reset after flash.
Sorry i know thats alot to read, if anyone has any idea of what could be wrong or tests i could do i would greatly appreciate it!
FYI im currently running the new spt15 hyper dragon: current issue no usb connection and same boot problems.
does no1 have any idea about the problem i an experiencing?
Okay, so I read and read, searched and searched. So far I'm pretty stuck.
I did a ton of research before taking my LG P500h, and flashing the ROM because I wasn't a fan of the Froyo android setup. Did everything properly, ran an nandroid backup, everything that I was told to do.
Rooted using Gingerbreak APK, custom backup using Amon_RA custom recovery. All done using the latest USB drivers LG updated me with.
I am currently with Koodo Mobile here in Canada. Pretty much an offspring of Telus Mobile. Currently I am running Cyanogen Mod 7 the 6.5.7 beta build, and the phone is not bricked, or giving me any errors or hassle.
The problem is that I cannot use the 3G network or use the Koodo network. It only defaults to Telus towers. No android market showing up anywhere either. From what I've found on here, there doesn't seem to be a bugfix solution to this, and no settings I've been able to change on the phone has helped my situation. Maybe I missed something.
So, I decided to take it back to where I began, back to Froyo 2.2.1 . This is where it all went wrong. Tried going through the Nandroid backup and restoring that, I was given an " Error : run 'nandroid-mobile.sh restore' via adb! " . Okay, I'm not exactly a Java programmer so I'm a little intimidated. I do however have Android SDK going on my laptop.
Some more searching revealed the KDZ_FW_UPD.exe flashing method. I got the right KDZ file for my Koodo phone, V10V_00.kdz and began the process. Everything checks out, good to go, started update. Wait, phone not found? WTF! My laptop recognizes it, says my phone is connected and working. No problems here, just can't find it? UGH.
So, I need someone to either give me info on getting it to flash the kdz, or get Cyanogen Mod 7 working properly on my device.
Please help, I'll fully admit I'm a noob to this, and not an expert programmer either. But, I know computers and I fully understand what I have done so far to my phone. Just not enough to fix it.
Okay, I have gotten some things working on my phone. I think I am settling into Cyanogen Mod nicely. I missed the Google apps flash zip so I have my market and stuff. Its a shame the data does not work though. Oh well I will keep updating as it gets developed.
Sent from my LG-P500 using XDA App
GOT IT! finally...
Finally got my phone recovered to OEM specs. I had to restore my computer back to before I installed all my drivers and reinstalled all my USB drivers from there. Phone connected to USB properly, ran the KDZ updater, and it sucessfully installed the V10V kdz. All is well.
finally good luck.. enjoy androiding..
When you flashed the cyanogen mod rom what program did you use to flash the phone? And how did you make a rom backup? When you reflashed the stock rom did it still have all the original bloatware?
LG Optimus P500h TELUS became dead during Upgrading
Hi everybody!
I have LG Optimus P500h Telus. I purchased from Kijiji. I don't have any papers or documents for that so i cannot claim its warranty.
I was trying to upgrade its version during upgrading my device was stuck so I disconnected and plugged out its battery and inserted again. When i tried to turn it on. It never turned on again. It never ever appeared emergency mode again. I tried for several times by pushing home, power, and volume up and down buttons, and escape buttons. Now its just like dead. It never showed any sign of life. If anybody have any idea what happened with it and how I can recover or where I should take this one for repairs. I am in toronto, canada.
Your help and suggestions will be appreciated.
HELP!
http://forums.androidcentral.com/t-lg-phoenix-thrive/127858-jobans-kernel-2-08-overclock-cm7-2-3-7-etc-gyro-fixed-60.html
My problem starts from post #600
Please.
Hello everyone!
I received three days ago a HTC HD2. It was the first time I ever had an HTC, so it seemed a little wierd at first. The phone was not new, so it had saved many applications and contacts that I didn't need. So, without being very good documented, I made a reset from its settings. Then I saw that it didn't reset totally. Still, the google acount of the previous owner remained saved, and so did the contacts. Then I read about ClockWorkMod recovery and I devided to try, by a tutorial, to delete everything using CWM. It all went good, but after I wiped everything, when it started, it gave an error saying something like "no kernel in NAND". I read more about this issue and then I decided to instal another ROM,and I did, following a tutorial, install GingerBread 2.3.7. After I encountered some problems , because at first I installed it using a wrong version of CWM and it stucked at the booting screen( that X ), I made it from the second try. Now , the phone is moving pretty good, but the problem is that sometimes, if I lock it and immediately after that I try to unlock it, the screen flushes a little( turns grey , from black, as if it would work somewhere inside, but is not working completely) and it is annoying. I would be pleased if you would recommend to me a solution to this problem or another ROM, maybe a more stable one, with the exact steps I have to make in order to be a clean instalation. ( starting from this point, when I have installed this ROM, what I would have to do to install another, if I have to install another bootloader, or another version of CWM, and so on) .
I know that there are many topics on this matter on the forum, but I am really noobie, and I need a little bit more details, because I don't really understand what every thing, in a topic about a ROM, refers to.
Thank you!
Hello,
Hope you guys can help me. I'm lost right now. (COMPLETE NOOB)
Yesterday I rooted my htc amaze 4g with Hasoon's tool and it worked. Then I installed the Speed 8.0 rom on my phone and everything worked except that it did not recognized my mobile data. I could not even see the 4g in the corner next to the signal symbol.
After that I thought my Wind phone might not be 100% compatible with that ROM (since the rom might be for tmobile phones or something) so I tried the FastAmaze rom but the same. Now I'm trying to go back to the Stock rom, but I cant.
I tried downloading the RUU but once I start the process, it can not be completed. I don't get an exact error it only tells me that the usb might not be connected to the phone or to check the battery. I tried the same thing many times.
I really need data on my phone (Plus I'm paying for it). Can someone help me to restore the STOCK rom or to get data in the Speed or Fast Amaze rom? To avoid future problems I would prefer to just stick to the Stock rom, but if is not possible then as long as I can get data on my phone I'm happy.
A 1000 thank you to all of you.
PLEASE HELP!!!! (Again, I'm desperate)