Related
Hi Everyone,
I, like many of you, spend way to much time setting phones up over and over again. Since a big part of this is registry edits, I have built a web site that allows you to check off the registry options you want, which it then uses to create a downloadable CAB file to install that will contain all of those registry tweaks. This makes things completely reversible by uninstalling the CAB file.
Notes:
This is Beta. While I have used it, and it's a very basic process, it isn't commercial software by any means.
If you would like to add a new feature, post in this thread.
You may install more than one cab file created with this tool. Just use different names at the bottom of the form.
Without further delay, here's the site:
<edit> The tool has now moved to nowsci.com. If you have any issues, please let me know. </edit>
http://nowsci.com/registry-changer/
Thanks,
Ben
* hold for updates *
Update 1: HTML now renders mobile friendly, so you can use this straight from your device.
Update 2: Edit feature added.
Update 3: Can now manually specify string or integer.
Update 4 [11/17/2008]: Can now specify the app name for install, allowing the user to have more than one Registry Changer cab installed at any point in time.
Update 5 [03/27/2009]: Fixed some character flaws for input. Preparations for move to a new host.
Update 6 [04/22/2009]: Added a filter option.
The site now has the ability for the end user to add registry entries to the database.
Thank you very much. I believe the "Camera Enhancements" entry is mis-titled. Shouldn't it be Rotate Picture 90 degrees, not 180 degress?
Doh! I will fix that.
Also, just added all the registry entries from the Diamond Tweaks post.
What about the Bluetooth DUN profile adding to the list? - Mike
What's the registry entries for that? Happy to add them, or you can add them yourself now through the site.
What happens if you tweak a registry entry that does not exist on your specific device or rom?
Good question. For the most part, I would guess nothing. If there is nothing on your system looking for the registry entry, then it won't effect anything. That being said, that doesn't mean WM doesn't look for registry entries that aren't there. For instance, the following tweak:
Enable Vision Duration/Disconnect Popup
HKLM\ControlPanel\Phone\Flags2=16
Flags2 doesn't exist by default on most any WM6 phone. Adding it in, enables the disconnect.
Who added the "Mighty" tweaks? Is that a phone? Many of those seem like they should go in Misc. I might clean that up if those aren't specific to a phone.
Would it be possible to have a wiki of descriptions for each of these options? I know I could Google them one by one but I'm sure users would appreciate a single source.
Hmm, not a bad idea. I wonder if there was a spot on the xda wiki I could use for it since I don't have my own. I may end up integrating a detailed description field for each item with a question mark next to it. Unfortunatly I won't be able to define them all since people have added one's I've never used.
OK I have a request. I don't' so much mind tweaking the settings when I flash. However what does drive me nuts and keeps me from flashing is knowing I will have to reconfigure all my email accounts. I just use the default mail program, but what a pain going through and adding my 7 yes Seven email accounts every time I flash my phone. Is there a way to make a cab that would auto input all my account settings? The reason for so many accounts, is I have personal accounts, business accounts, email list accounts, car club accounts, and forum subscription accounts.
It would be awesome to be able to go to a site, or run an app where I could plunk in all my account settings, then create a cab store it to my SD card and whenever I flash, just run the cab and POOF all my accounts are setup.
Unfortunately, probably wouldn't be easy to make a cab. However, programs like Sprite Backup will do this for you. You can selectively restore your mail using SB, however I generally back up my phone once I get things the way I like it, then if anything goes sour, I hard reset, then restore.
any1 made an ultimate tweak.cab? maybe make your diamond seem as fast as a custom rom?????????????
then any hardreset.......
dewey1973 said:
Would it be possible to have a wiki of descriptions for each of these options? I know I could Google them one by one but I'm sure users would appreciate a single source.
Click to expand...
Click to collapse
+1 on descriptions of each cab
Wow very nice! Thanks!
I suggest a field to make a *.cab regarding to any registry path/setting the user wishes (if the user is more technical).
without having to actually add to the public entry list.
This will allow the ability to:
1. not have to wait for the admin to add the specific entry
2. allows the author of the new *.cab to distribute their new edit on the fly.
3. give the admin to log & analyze the entries in the custom field to and determine more of the common *custom* entries the ppl may want. Thus not having to depend on explicit user input and emails all the time.
First - thanks for putting this together!
Quick question - I had it "enable" GPS coded photos...but I don't think it did? Shouldn't I have an option somewhere in my camera menu to activate this once I've installed the .cab? Additionally, I don't believe "enable landscape pictures" and "sport mode" worked - how do I know?
Many thanks!
Oh, and I forgot to mention (not that it matters???) that I'm on an HTC Touch Pro with Sprint - stock ROM. I'm new to all this, so I apologize if this is basic stuff.
And no, this is not another one of those.. " I locked myself out threads".
I used to have a Treo 700wx which worked wonderfully until I switched to ATT and bought a HTC tilt. The Tilt being way faster and everything I could ask in a phone there is 1 small problem..
With the Treo, when I went to "lock" I could enter any sequence of numbers, either being 1111 or 1234, or anything simple. With the Tilt, its not so simple.
When I try to enter a simple password, it says it must be more complex.. The exact error message is "Password Error. Please enter another password. The password must be at least 4 characters and not contain a simple sequence". That's nice and all HTC, but considering my phone is in MY pocket 90% of the day, I don't necessarily need a complex password.
Ive tried looking on xda, all the possible software sites that Google has thrown at me, and I couldn't find a single post or thread about this.
I do know there are programs out there like the iphone slider, which is amusing. and a couple of other ones with patters and whatnot.
So my question is Does anyone know of a way to make it so I could have a simple pin with the default lock program? And if not, does anyone know of a similar program that does the same thing?
The reason I ask is myself a few other windows 6.1 users have also asked the same question. If anyone knows, please share so this community will know!
Thanks
- Felman
*edit* I just realized that this thread belongs in the "Questions and answers" area*
I'd suggest editing the registry, and changing the policies.
However, if you're synching with Office/Outlook Exchange servers and the server is actively pushing security restrictions to your phone periodically, you might have a hard time getting rid of said restriction permanently.
Thank you Bouvrie for your post, and I did find some useful information, but nothing to the lines of actually modding the registry to allow me to have custom passwords that are not complex.
Any more ideas?
So this part ain't of any help to you ?
Determining Password Complexity
Registry Key: HKLM\Comm\Security\Policy\LASSD\LAP\
lap_pw\PasswordComplexity
Value: 0 = Require Alphanumeric. 1 = Require numeric (PIN). 2 = No restriction.
Click to expand...
Click to collapse
~Flo
You didn't say if it was to do with enforced security settings?
If so, this little app will help
http://www.zenyee.com/2008/10/19/stay-unlock-goes-20-after-two-years/
TheFloww said:
So this part ain't of any help to you ?
~Flo
Click to expand...
Click to collapse
I did think this part would work, but after looking into the registry, I found it was already set at 2. Because I do not have a password set.
brandall said:
You didn't say if it was to do with enforced security settings?
If so, this little app will help
http://www.zenyee.com/2008/10/19/stay-unlock-goes-20-after-two-years/
Click to expand...
Click to collapse
I just tried this app, and it did not work the way we thought. Thanks for the try!
anyone have any ideas.. I can't seem to find any regedit keys that deal with this issue.
It's impossible BOB.
I have a Touch Pro, and love it, but I only get 12 text messages per screen before I have to tap the "Older" link to go back another 12.
It makes it really difficult to page backwards and look for a particular message.
Is this controlled through the registry? I'd like to make it display more than 12 at a time, if possible.
Thanks in advance!
Since posting this, I've gone through the Arcsoft keys in the registry and cannot find the value for this.
Either this is not controlled in the registry, or it's hardcoded somehow.
Anyone know?
I know that I'm reviving an old thread but I am interested in this concept as well. Its a pretty big pain in the ass to have to go back page by page to get to older messages, so I would like to either change it to show the entire thread which seems like it would be a major memory hog, or to significantly increase the number of texts per page.
Any help on this front would be fantastic, thanks.
Bump? Anyone?
I thought I would mention the release of a new application called DynaInk. It works with both stylus and finger and allows you to draw on a blank canvas or over a file or photo. Has undo and different pen types and colours. You can save and email your drawings as well.
I liked it so much I bought it ($9.99 US) straight away after just playing with it for a minute or two.
Here is the list of features...
Multilingual
- Available in English and German.
Supports all screen types
- QVGA, VGA, Wide, Portrait and Landscape modes are supported
Drawing Tools
- Pencil (fixed width)
- Brush (draws stronger line for slow movements)
- Pen (draws stronger line for fast movements)
Color Selector
- Fast and easy to use Color Chart
- Eyedropper for selecting color from the canvas
Files (check this out)
- Exporting in industrial standard EPS format
- Export in JPG, BMP, PNG or GIF format
Instant E-mail
- You can send your work via e-mail as a JPG attachment
- DynaInk prepares your mail (with attachment) in Outlook Mobile
Background
- You can directly use image from your built in Camera as background
- Importing background from file (JPG, BMP, PNG or GIF) is also possible
- Show / hide background
Unlimited Undo
- Undo till the first step is possible
- Full drawing history with thumbnail images
- Drawing history is also saved, so you can undo your steps in loaded artworks
You can see/buy/trial the app here: http://dynaink.com
***No, I do not work for them. I just thought others would like this app.
dude you should upload it so all of us can share. do ur part to help this forum
10076757 said:
dude you should upload it so all of us can share. do ur part to help this forum
Click to expand...
Click to collapse
First, posting warez is not allowed. Second, if you look at my details (top left of post) there are stars, I support the forum.
Having tried other inking/drawing/note taking apps, they don't seem to do well with the capacitive screen so you end up with wobbly inaccurate lines.
Is this one better...I will give it a try, but would also value your opinion
10076757 said:
dude you should upload it so all of us can share. do ur part to help this forum
Click to expand...
Click to collapse
Can't click a link can you?
Pleased you brought this here Nighthawk..... I was just about to do it myself.
Yes, it's a great little New Application.
Very clean and uncluttered.
Loves
1. Background Import:-
I rather like the idea you can import either as a Background or a File a picture.
What is interesting in the Background selection is you can select Camera. Next step take a Photo and it's automatically imported into DynaInk.
2. Multiple Undo's:-
This is brilliant and is a god send of a time saver.
3. Dynamic Brush Selection:-
Gives the Brush & Quill a natural drawing ability.
Dislikes
1. Removing unwanted ink strokes:-
If you draw to the edge (or near) of the screen and then select Undo then undo your strokes, after the Undo window disappears instead of clearing away all the ink strokes selected it leaves the ink on screen that was previously shown outside of the Undo window.
In other words it clears away any strokes within the Undo window but leaves the ones outside on the screen.
2. Finger Painting
It works but it's a bit hit & miss.
Maybe a Capacitive Stylus will help with this.
Queries
1. Portrait/Landscape
According to the Manual it states the program works in either Portrait or Landscape.
I can't find anywhere in how to make the program change to Landscape?
Improvements
1. Zoom Feature
It would be great if we had an option to zoom in on the work.
This would certainly help with the finger painting in help getting the finger in the right place.
Notes:
1. Well, we have 7 (seven) days trial use.
The web site needs a Forum but in the meantime I've left a few questions on the Support feedback message box.
Happy Painting all.........
I did give it a try and as a drawing application it is excellent, even just on a few minutes playing. I have the artistic ability of a small, sun-hardened cowpat (or say Tracy Emin) and the pen mode can even make a few of my daubs look reasonable.
However, I primarily wanted a scribbler for notes, for which it works up to a point if you are prepared to go slow and steady, but even then it sometimes loses the plot.
If I was a sketcher I would buy this in a heartbeat, but I don't rate it for note taking, at least if you only have your finger handy
Beards said:
Dislikes
1. Removing unwanted ink strokes:-
If you draw to the edge (or near) of the screen and then select Undo then undo your strokes, after the Undo window disappears instead of clearing away all the ink strokes selected it leaves the ink on screen that was previously shown outside of the Undo window.
In other words it clears away any strokes within the Undo window but leaves the ones outside on the screen.
Click to expand...
Click to collapse
Just received a reply back from DynaInk to this one.
Hi,
Thanks for reporting this problem. As I see it only occurs when you undo all your steps. This case DynaInk does not refresh the screen.
I will correct it ASAP, until that you can use File/New to undo all your steps.
Best Regards,
Gabor
-------------------------------------------
That was quick.... I only sent off the request around an hour ago.
Guys,
Received another message from DynaInk this evening:-
Thanks Mike!
I hope I can do the fix tomorrow and I will upload it to dynaink.com/download page.
Best Regards,
Gabor
--------------------------------------------
Got to hand it to DynaInk, they certainly are on the ball and look after the customer base.
damn it.. just what I've been looking for.. I am going to try it now..
thanks so much.. THANK GOD!!! finally..
bumskee said:
damn it.. just what I've been looking for.. I am going to try it now..
thanks so much.. THANK GOD!!! finally..
Click to expand...
Click to collapse
Trust me... you won't be disappointed.
Yeah, I got responces from DynaInk last night after I posted a couple of questions to them and such, about 2 hours after I sent them. I am really impressed with that.
I can mention that the software supports WVGA, they just didn't list it in the overview.
As for rotating, could it be a HD2 issue? I'm going to fiddle with registry and will let you know.
Nighthawk said:
Yeah, I got responces from DynaInk last night after I posted a couple of questions to them and such, about 2 hours after I sent them. I am really impressed with that.
I can mention that the software supports WVGA, they just didn't list it in the overview.
As for rotating, could it be a HD2 issue? I'm going to fiddle with registry and will let you know.
Click to expand...
Click to collapse
Yes.. I've now sent two messages and both came back within the hour (or thereabouts).
As to the rotating, the manual doesn't give too much info (apart from actually saying Portrait/Landscape).
Would be interesting if there is a reg key.
The developer's going to send me an email very soon with the update to the problem I found on screen refresh. I'll post it here as soon as it comes through, along with any other snippets of info.
I've done the registry hack, but it didn't work (created CAB). I suspect it has to do with the value needed for the HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList >>>
Registry String: DynaInk
Value: ????
Anyone know what I should use here as a value?
*** Tried MunichWinClass, DynaInk - no luck
***UPDATE *** I have got rotation working, you can grab the CAB below for making the change.
The (SC) version is for using if DynaInk was installed on Storage Card. Having not made CABs before I wasn't sure if there is a way to set it up (WinCE Cab Manager) to recognise where app was installed automaticaly, so I made the two seperate ones.
Gustopher said:
However, I primarily wanted a scribbler for notes, for which it works up to a point if you are prepared to go slow and steady, but even then it sometimes loses the plot.
If I was a sketcher I would buy this in a heartbeat, but I don't rate it for note taking, at least if you only have your finger handy
Click to expand...
Click to collapse
You should drop them a line via the support section on their website and ask about them making a Notes application, seems to me they have a lot of the work already done.
http://dynaink.com
Beards said:
Yes.. I've now sent two messages and both came back within the hour (or thereabouts).
As to the rotating, the manual doesn't give too much info (apart from actually saying Portrait/Landscape).
Would be interesting if there is a reg key.
The developer's going to send me an email very soon with the update to the problem I found on screen refresh. I'll post it here as soon as it comes through, along with any other snippets of info.
Click to expand...
Click to collapse
You mean this...
Nighthawk said:
You mean this...
Click to expand...
Click to collapse
Yeah... that's the problem.
Gabor can see the problem and he's working on it.
Also, thanks for looking at a registry hack for the screen rotation.
I'm busy right now but will try it out later tonight and get back to you.
Cheers.
Mike
Nighthawk said:
You should drop them a line via the support section on their website and ask about them making a Notes application, seems to me they have a lot of the work already done.
http://dynaink.com
Click to expand...
Click to collapse
It's a good thought and one that I may just follow up on, thanks.
The main problem seems to be that the fine movement and close curves required to write is misinterpreted, so you seem to get random straight lines joining what I'd guess was two points detected as having been pressed on the screen.
If you write big and slowly it's mostly ok, but I wonder if the screen can ever work properly for notes without a stylus.
Certainly not the software's fault though - it's a tidy bit of kit!
Nighthawk said:
I've done the registry hack, but it didn't work (created CAB). I suspect it has to do with the value needed for the HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList >>>
Registry String: DynaInk
Value: ????
Anyone know what I should use here as a value?
*** Tried MunichWinClass, DynaInk - no luck
***UPDATE *** I have got rotation working, you can grab the CAB below for making the change.
The (SC) version is for using if DynaInk was installed on Storage Card. Having not made CABs before I wasn't sure if there is a way to set it up (WinCE Cab Manager) to recognise where app was installed automaticaly, so I made the two seperate ones.
Click to expand...
Click to collapse
Not had chance yet to try this out Nighthawk.
Can you tell me what it actually does to the software or how it's rotated?
Is it done automatically as you rotate the screen?
It's just adds DynaInk to the GSensor Whitelist (registry), same as we had to do for TomTom.
HKCU/Software/HTC/HTCSENSOR/GSensor/ModuleName
Key: DynaInk
Value: \Storage Card\Program Files\DynaInk\DynaInk.exe
HKCU/Software/HTC/HTCSENSOR/GSensor/WhiteList
Key: DynaInk
Value: #NETCF_AGL_BASE_
This is a little project i've been working on and i thought it was ready enough to be released into the wild. Below is the readme file. I think it covers everything for now. Before posting please read the first 3 posts - especially post 3 - if it is obvious that you haven't done this i will not respond with any form of help and i don't not expect any of the users to do so either.
----------
Included with this zip file are several .cab, .reg and .xml files that will automatically configure your NRGZ28 energy rom when XDA_UC runs upon first boot after flashing.
Included are the following configuration files
activesync.xml
This will configure your MS Exchange settings. Editing with your personal settings is required. Look for the username, server, domain and password tags at the start of the file
aGPS.reg
Enables aGPS
BackLight.reg:
Sets backlight to auto. There are some other settings included for dim and light off times when on battery and AC power aswell
bt_ident.reg
Sets the Bluetooth Identity. Edit the deviceid line to suit
copy.mscr
Copies files from the copy2root folder to the matching location in device storage. A My Documents folder with My Ringtones and My Wallpapers sub folders have been created already. Place you ringtones and wallpapers in these folders. There is also an application data folder which contains a coreplayer config.xml and a program files folder which contains a myPlayer options.ini. Feel free to create more. Thanks to nrfitchett4 for providing this script.
Del.mscr
This file will remove all unwanted ringtones, wallpapers and any other files you decided to add. Edit as you need to. N.B any readonly files will need attributes changed before they can be deleted.
DisableSenseVsync.cab
Disables Vsync in sense increasing the framerate thus making it faster
HD2MemTweaks.cab
Increase's glyphcache size past the bsb tweaks and advanced config defaults, incrases filesystem cache size and a few other bits. This cab file is optional. Delete it if you don't want it. Thanks go out to g.lewarne for documenting the tweaks
HTCAlbumIgnore.reg
Stops the sense music player playing ringtone files from \My Documents\My Ringtones\ and \storage card\ringtones. Copy the examples
if you want to add to it.
M3PH HTC Location Service Enable.cab
Enables HTC location Service and automatically excepts the TOS
ident.reg
Changes the phones identity at first boot. If NRGZ28 won't make it sensible i'll make it so we can customise it . Editing required. this one is pretty obvious
Palringo.reg
Sets up palringo, sorta, change [email protected] to your user name and it should show up at sign in. All you need to do is enter your password
QuickGPS.reg
Enables and configures QuickGPS with the defaults
Ringtones.reg
Configures the ringtone, sms tone and email tone. Needs some editing but you only need to change the file name for each entry, not the
path. The Ringtone2 entry allows for second ringtone to be added to the list of usable ones so you change them with too much fuss.
Also enables flashing light on sms reception for 5 minutes.
wifi_setup.xml
wifi settings. Edit required. This link should help you set it up (see post 3 for details on how to edit)
M3PH Enable Time Auto Update.cab
Enables NTP
Volume.Reg
Sets the volume levels. You can use this one or export your own from HKEY_CURRENT_USER\ControlPanel\Volume
Windows live.reg
Pretty much configures windows live. You do still need to enter your password and you will also need to do atleast one manual sync before Sense will create the mailbox on the email tab but otherwise it works
Opera User Agent String folder
See the readme.txt in that folder
Sense Folder
If you put your wallpaper in this folder it will be installed as the sense default. Just rename it to sense_wallpaper.png.
Start Menu folder
Copy Start Menu shortcuts here
----------
If you like this or any of my other work click the "donate to me" link above my avatar
----------
REMEMBER THIS COLLECTION OF FILES IS PRESENTED AS IS UNDER THE GNU GPLv2. IT IS BETA SOFTWARE AND COMES WITH NO WARRANTY OR ANY FORM OF OFFICIAL SUPPORT. I, M3PH, SHALL NOT TAKE RESPONSIBILITY FOR ANY DAMAGE OR DATA LOSE THAT MAY OR MAY NOT OCCUR TO YOUR DEVICE.
Change Log
Change Log:
1.1.1 Final
Removed Keyboard sensitivity tweaks
Removed opera memory tweaks
Added more palringo settings
Added Quick shutdown settings
1.1 Final
Updated volume.reg to default to seperate system and ring volume controls.
Removed all tweaks now included in Energy roms dated nov30 and newer. I will leave v1.0 posted for a while so people that like to install older versions still get the benefit
1.0 Final
Added Windows_live_settings.reg. You will need to edit it as prescribed on page 16 but it will work.
Added Improved GPS settings.cab. This is untested by me but i trust scabes24 enough to know he's not going to pass on unreliable tweaks
Improved M3PH Location Service enable.cab: Added an extra registry setting that should trigger Manila to showing it's on. This is doubtful but even if it doesn't the file does work
Added alarm_settings.reg: This is only an example file. You will need to export your own settings but this should be a reasonable starting point
Removed readme.txt: It was a habit a picked up from Linux development practices and was pointless for this project
Removed time.reg permanently because there is nothing changed in the registry when it is enabled.
--- Pre Final releases
Tips and Tricks
What follows are some tips and tricks i have found that i'm not going to include for whatever reason but thought some people might find handy or notes on what settings do what and their options.
Q. Can i delete file xyz using xda_uc because i like to have as much space as possible?
Yes you can. i found this link. All you need to do is create a file in the xda_uc folder with the extension .mscr which contains the following:
Code:
delete \test.txt, TRUE
or
Code:
deltree \test, TRUE
Obviously change test to the file or directory you want to delete. For more details check out the provided link above.
Q. The default wifi.xml doesn't match my configuration and i can't find a resource that tells me what are valid values for the options?
A. See this link and this one. As a note if you use WPA2 you need to use <parm name="Authentication" value="6" /> and WPA2-PSK is 7
Q. The exchange settings in activesync.xml aren't how i like them. Can i change them?
A. Sure can! Here's a link to the documentation
Q. I use a [enter service name here] and i want to create an xml file to configure it when i update my rom. Can i do this?
A. Thanks to microsoft developing WAP provisioning to an incredibly encompassing level you can do almost anything. See this link
Q. I want to make a cab file out of all my changes. How do i this?
A. There are many ways but i think this is the best one i've found because it doesn't involve any third party software and is really simple. All you need is the windows mobile sdk, which can be found here. You may also need visual studio but i'm not sure
Making either is very simple. You just pass a normal XML file to makecab and give it the name of the output file you want. The one trick is that the XML file must be named _setup.xml. If you call it something else, makecab will succeed, the CAB or CPF file will be generated fine, and then it will fail with a cryptic error when you try to use it. Beware, the documentation doesn't make this very clear.
The syntax for making a CAB file is:
Code:
makecab _setup.xml config.cab
Click to expand...
Click to collapse
Q. Wow you really do know a lot about this sort of stuff. How can i learn?
A. Well i don't know that much at all really, i just learn fast. Most of the stuff you see here was obtained from or via this MSDN article: http://msdn.microsoft.com/en-us/magazine/cc500581.aspx
Q. Is there a way to boost the performance of Opera in terms of memory/speed?
A. Yes, this cab will force Sense to unload when launching Opera, allowing for better performance while browsing. (When exiting Opera, Sense will then reload) (thanks to Scabes24 for this one)
Code:
[URL="http://www.megaupload.com/?d=O5O1RE97"]Enable Opera Max Memory Tweak.cab[/URL]
Q. I've installed the Opera tweak and everything is working fine, but the page loading seems very slow. Is there a way to improve this?
A. Yes you can, the following registry tweak will enable almost instantaneous web page loading in the web browser. It apparently enables wireless N mode but seems to work with cellular data too. Go to:
HKLM/Comm/BCMSDDHD1/Parms
11nModeDisable = Change from 1 to 0 (thanks to Scabes24 for this one aswell)
Q. My wifi hotspot uses EAP certification and i can't use it because the phone gives me a certificate verification failure error. What can i do?
This was posted in the energy rom thread
NRG, after weeks of not being able to connect to my work wireless network because I was getting a "certificate is from an unknown authority" error, I finally got it working. Can you add this key to your ROMs?
[\HKLM\Comm\EAP\Extension\25\]
"ValidateServerCert"=dword:00000000
This is where I found the answer:
http://social.msdn.microsoft.com/for...-3ebe003aa996/
Click to expand...
Click to collapse
Thanks to oppressa for hunting this one down. The tweak is included as an option in EXCT as M3PH EAP Cert Disable.cab
Here are some locations where 3rd party apps store their values. These were provided by angusc
CodeCity Time settings and Key Code:
[HKEY_CURRENT_USER\Software\CodeCity\CityTime]
Ageye G-Alarm settings and keycode:
[HKEY_CURRENT_USER\Software\ageye\G-Alarm]
Ageye G-Profile settings and keycode:
[HKEY_CURRENT_USER\Software\ageye\G-Profile_v1]
SK Manager settings and Keycode:
[HKEY_CURRENT_USER\Software\sk\smgr]
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Rai\:S KSM]
SlingPlayer Login Details:
[HKEY_LOCAL_MACHINE\Software\Sling Media\SlingPlayer\SlingAccounts]
SPB Language Cards key code:
[HKEY_CLASSES_ROOT\CLSID\{F5C24D33-742A-41BC-BC22-1195BC138ECE}]
SPB Traveller Key Code:
[HKEY_CLASSES_ROOT\CLSID\{7D562A74-A69B-45F5-8D1F-20DABDCE2C76}]
SPB Wallet Key Code:
[HKEY_CLASSES_ROOT\CLSID\{A79D1B0D-2F6A-4E7E-AF94-5EEBC8BFD684}]
Sprite Back-up Key Code:
[HKEY_LOCAL_MACHINE\Software\Sprite Software\Sprite Backup]
RSS Hub Settings and Feed Storage Locations:
[HKEY_CURRENT_USER\Software\Ilium Software\RSS Hub]
SPB Traveller Settings:
[HKEY_CURRENT_USER\Software\Spb Software House\SPB Traveler]
Today Wall Paper Location:
[HKEY_CURRENT_USER\Software\Microsoft\Today]
KeyBoard Config by Tarkim (Settings):
[HKEY_LOCAL_MACHINE\Software\KeyboardConfig]
Resco Explorer Settings:
[HKEY_LOCAL_MACHINE\Software\Resco\Explorer]
Palringo Settings:
[HKEY_CURRENT_USER\Software\Parlingo\Settings]
Click to expand...
Click to collapse
The FAQ
Q. Will you include xyz tweak for me?
A. Only if it's a common one or one that i haven't thought of
Q. I use xyz program and i want to have the config file included in your great collection. What do ya' say?
A. See above but you could always spend 10 minutes tracking it down and then creating a folder in copy2root for it
Q. Why is the bluetooth identity the only tweak for BT you include?
A. Because everyones setup and hardware is far too different for it to be worth it. Also, Although you can export the pairings importing them may not be possible due to the way the bluetooth security protocols work.
(More To Come)
Happy to try this, thank you for cobbling everything together.
wow
this would be so handy, i hate spending time making your phone how you like it. I don't flash as often because i get too comfortable with the current configuration.
thanx M3PH
btw: without NRGZ28 i would have sold my HD2 7 months ago
grumpylad said:
Happy to try this, thank you for cobbling everything together.
Click to expand...
Click to collapse
No worries. I did it because i was getting annoyed with spending ages setting everything up and even more annoyed with people not reading the energy rom FAQ properly (i'm guilty of that too). I used the pre-release version last night after flashing the latest energy rom and it saved me in the region of an hour to an hour and a half. It's not perfect by a long way. Things like the sms led notification is enabled and some people may not like that but is is easily reverted with bsb tweaks.
My plans for the next version is to have all the reg files converted in to cab files for they can be removed and i'll tidy up the readme a bit.
One thing i would like help with though is the FAQ. Can the first few people take notes of any problems or questions they have and things or that nature.
Thanks everybody
Thank you, I'll try it out with the new Energy release. I'd be happy with the reg files to import it doesn't even need to be a cab!
Thanks!
lantern20 said:
Thank you, I'll try it out with the new Energy release. I'd be happy with the reg files to import it doesn't even need to be a cab!
Thanks!
Click to expand...
Click to collapse
Cab files are better because they can be removed and Reg files can't. So if one of these files causes a problem your stuck and that's why it's labeled as alpha software. Also labelling it as that will scare off the less experienced users from trying it and doing themselves a mischief.
V0.2 will be all cab files as far as possible but don't expect a release until 0.1 has had a thorough real world testing.
oh. it is better ,if i find this post eight hour ago.
it drives me nuts ,everytime i get into a new nrg rom.
thank you very much.
Great idea man, thank you so much for this!
Thanks a lot for this! It will definitely save me a lot of time after a rom update. I just have to hope I've set them up correctly and dont break something
Hello
This project is a very good project, I hope is work well
Is it compatible with other language ?
Ex : "Start Menu" folder in WWE Rom is "Menu Démarrer" In FR
Good luck.
@+
diamond_cbr said:
Hello
This project is a very good project, I hope is work well
Is it compatible with other language ?
Ex : "Start Menu" folder in WWE Rom is "Menu Démarrer" In FR
Good luck.
@+
Click to expand...
Click to collapse
no sorry as it stands it's wwe only. If you want to convert it to french and send it over to me i will post it.
yeoldgreat, if you would like to pm me your changes i will look them over.
Overall i'm really pleased with the response so far but i really do need everyones help with composing the faq because for me this works fine (apart from the unteseted bits because i haven't used them yet) so can all of you please, please, please make some notes on your progress and keep posting those questions
M3PH said:
Overall i'm really pleased with the response so far but i really do need everyones help with composing the faq because for me this works fine (apart from the unteseted bits because i haven't used them yet) so can all of you please, please, please make some notes on your progress and keep posting those questions
Click to expand...
Click to collapse
My temptation would be to assume that the FAQ is written for me if I can install and get it working anyone can. For instance in the wifi detailing where the various parm's can be found would make it much easier to install. Very happy to install on what you have and pass back any questions assumptions.
As I frequently flash(ROM's only) I can help with refining the documentation.
grumpylad said:
My temptation would be to assume that the FAQ is written for me if I can install and get it working anyone can. For instance in the wifi detailing where the various parm's can be found would make it much easier to install. Very happy to install on what you have and pass back any questions assumptions.
As I frequently flash(ROM's only) I can help with refining the documentation.
Click to expand...
Click to collapse
Sweet, thanks. That is exactly the sort of thing i'm looking for, because it's been over a year since i did any kind of manual writting i'm pretty rusty. It also doesn't i developed most of the parts in just over 24 hours working on my phone and not my pc everything is a bit scattered in my mind. That's the reason why the readme looks the way it does. It all came out in a bit of a splurge.
The wifi script is one of my older scripts and it took 3 attempts to get right and now i can't for the life of me find the resource on ms technet that i used.
I'll probably have a sitdown over the weekend and have a rerun through the readme and make it a bit more detailed. If i can make it as easy to install as possible then the faq won't be such an important thing
How many people want me to include a coreplayer config.xml in the next version? i've got one that works perfectly with myplayer and turbo3d.
Nice Work
I used a number of these to flash the latest Energy Rom and it worked out great. Very smooth! It will be interesting to see what is added on in the future. Thank you for putting the time in and starting a new thread.
jamesdee said:
I used a number of these to flash the latest Energy Rom and it worked out great. Very smooth! It will be interesting to see what is added on in the future. Thank you for putting the time in and starting a new thread.
Click to expand...
Click to collapse
I'm taking suggestions for additions. So how about one?
Very interesting sir!
I am going to flash the new Energy ROM either tonight or tomorrow and so will chuck this in with it.
I wont use several of them as I dont use those aspects, but those I do will return with feedback.
I have been frustrated with this as well.... fingers crossed.