Is there an app that will reduce gwes.exe without soft resetting? I've tried cleanram but it doesn't seem to do it. thanks in advance.
Related
I have had my 8125 for a while, and just recently started installing many programs on it. Ive noticed that now if i go to settings>personal>lock, i can change the password, however it is set to ask every 20 mins. This option is faded, and I am not able to change it or disable it. Ive tried uninstalling all the extra software I had and several soft resets but It stays the same. I do have a registry editor but I dont know what I would have to edit to fix this, if at all. Does anyone know how I can fix this?
Thank You
Hello!Excuse me if this question's already been asked, but I just couldn't find it. I've just done a hard reset on my XDA IIi, & installed the applications.
Why does this icon(dunno what it's really called),like the one that comes out when there's a running program(like an analog clock) just keeps popping out all the time, even if there's no program running?How do I stop it? Soft resets don't seem to work. Please advise.
First, I love this app! And thanks to all for the hard work!
But I do have an issue...
I did a hard reset on my Omnia and installed TF2D. But I can't seem to get it to take up the whole screen. I have about an inch of dead empty space below the app. Basically it stops just above the volume keys. Anyone else see this? Any ideas on what I can do to make it expand more?
ned4spd8874 said:
First, I love this app! And thanks to all for the hard work!
But I do have an issue...
I did a hard reset on my Omnia and installed TF2D. But I can't seem to get it to take up the whole screen. I have about an inch of dead empty space below the app. Basically it stops just above the volume keys. Anyone else see this? Any ideas on what I can do to make it expand more?
Click to expand...
Click to collapse
I think I may have at least figured out what's going on. Maybe some settings from other themes are hanging around and not being deleted before applying the new theme? For instance I also noticed that "am" by the time is not the same font as the time itself.
Also, looking in my Windows folder I have about 450 files with the names "hh_email..., hh_fw...", hh_hm...", etc. And about 216 in the Windows\ManilaGFX with similar naming. Is this normal. I did a hard reset last night. But maybe when I sync'ed it, it carried over some of the bad settings from before???
UPDATE: I think I'm going to have to Hard Reset it...again. I'm thinking that I have a couple issues going on here. I think that after I reset it last night, the sync copied over the bad files back into the Windows directory.
Now, I can copy the original HTChomesettings.xml into the Windows directory and it works. Kinda...but as soon as I use the M2DC program to switch themes, it messes everything up again. Not sure what's going on here. And no matter what I try now, I don't have any of the icons in my weather tab. This sucks.
Hello,
I am (very happily) running a 1.06 package from qsqa (ROM 1.95.502.5 WWE) and encountered by first problem today, seemingly after installing the GSen app floating around this forum developed for the TP2.
Since installing the GSen cab the meter at the top of my Today screen on TF3D went from 100% to 20% and has not changed since, despite the power section in control panel suggesting the battery in full.
I have tried uninstalling/reinstalling GSen and then uninstalling again. I've also used Advanced Config to remove the battery icon the title bar, soft reset, reinstated the icon and soft reset but to no avail.
I've scoured these forums but can't seem to find any reference to this issue. Can anyone help please?
Thanks in advance.
gottaluvsports said:
Hello,
I am (very happily) running a 1.06 package from qsqa (ROM 1.95.502.5 WWE) and encountered by first problem today, seemingly after installing the GSen app floating around this forum developed for the TP2.
Since installing the GSen cab the meter at the top of my Today screen on TF3D went from 100% to 20% and has not changed since, despite the power section in control panel suggesting the battery in full.
I have tried uninstalling/reinstalling GSen and then uninstalling again. I've also used Advanced Config to remove the battery icon the title bar, soft reset, reinstated the icon and soft reset but to no avail.
I've scoured these forums but can't seem to find any reference to this issue. Can anyone help please?
Thanks in advance.
Click to expand...
Click to collapse
Soft reset maybe?
gottaluvsports said:
Hello,
I am (very happily) running a 1.06 package from qsqa (ROM 1.95.502.5 WWE) and encountered by first problem today, seemingly after installing the GSen app floating around this forum developed for the TP2.
Since installing the GSen cab the meter at the top of my Today screen on TF3D went from 100% to 20% and has not changed since, despite the power section in control panel suggesting the battery in full.
I have tried uninstalling/reinstalling GSen and then uninstalling again. I've also used Advanced Config to remove the battery icon the title bar, soft reset, reinstated the icon and soft reset but to no avail.
I've scoured these forums but can't seem to find any reference to this issue. Can anyone help please?
Thanks in advance.
Click to expand...
Click to collapse
Sounds like it's time for a hard reset.
Same problem mentioned here and the fix listed also.
http://forum.xda-developers.com/showthread.php?t=437307&page=201
Problem solved
Worked perfectly. Thanks heaps.
Flip. said:
Same problem mentioned here and the fix listed also.
http://forum.xda-developers.com/showthread.php?t=437307&page=201
Click to expand...
Click to collapse
I have been having a minor issue lately that is more of a nuisance than anything else...
I need to figure out a way to force a soft-reset after OOBE runs it's course and finishes it's processes.
Basically, my HD2 is hanging at the transition screen between OOBE and Sense. If I soft-reset manually, the issue is gone and you never see it again but if I can get the device to force a soft-reset after OOBE is complete, this issue will be resolved.
Please help!!
dharvey4651 said:
I have been having a minor issue lately that is more of a nuisance than anything else...
I need to figure out a way to force a soft-reset after OOBE runs it's course and finishes it's processes.
Basically, my HD2 is hanging at the transition screen between OOBE and Sense. If I soft-reset manually, the issue is gone and you never see it again but if I can get the device to force a soft-reset after OOBE is complete, this issue will be resolved.
Please help!!
Click to expand...
Click to collapse
It's not related to the new 3.01 ROM is it?
Funnily enough I have a problem like yours. I added documents tab to my 3.01 based ROM, but it hangs when manila should be loading after oobe/connection setup. If I soft reset, it works perfect.
docs tab is causing some kind of issue that I cant figure out, so a soft reset after oobe woudl be good.
the_scotsman said:
It's not related to the new 3.01 ROM is it?
Funnily enough I have a problem like yours. I added documents tab to my 3.01 based ROM, but it hangs when manila should be loading after oobe/connection setup. If I soft reset, it works perfect.
docs tab is causing some kind of issue that I cant figure out, so a soft reset after oobe woudl be good.
Click to expand...
Click to collapse
Interesting you mention the 3.01 ROM. Yes I did try cooking in the new 3.01 Sense and I did include the Documents Tab as well as 2 other user-made Tabs(Call History and Programs) and this IS when the issue started popping up.
What I did was remove OOBE completely and add a soft-reset command to the end of RunCC. This seems to have fixed the issue in the mean time but I didn't want to get rid of OOBE.
Still searching for a way to get the phone to soft-reset after OOBE..
dharvey4651 said:
Interesting you mention the 3.01 ROM. Yes I did try cooking in the new 3.01 Sense and I did include the Documents Tab as well as 2 other user-made Tabs(Call History and Programs) and this IS when the issue started popping up.
What I did was remove OOBE completely and add a soft-reset command to the end of RunCC. This seems to have fixed the issue in the mean time but I didn't want to get rid of OOBE.
Still searching for a way to get the phone to soft-reset after OOBE..
Click to expand...
Click to collapse
Can you tell me how you added a soft-reset to the end of RunCC? As I don't use OOBE and this woudl be handy. I've used UC in the meantime to force a soft reset but it's not a clean way of doing it as it resets just as connection setup is sarting.
EDIT: Would it be:
[HKEY_LOCAL_MACHINE\Software\HTC\RunCC]
"ResetDevice"=dword:00000000 ;CHANGE to dword:00000001
the_scotsman said:
Can you tell me how you added a soft-reset to the end of RunCC? As I don't use OOBE and this woudl be handy. I've used UC in the meantime but it's not a clean way of doing it.
Click to expand...
Click to collapse
Open your RunCC app.reg and ensure that the underlined entry is present. Then RunCC will automatically reboot the phone after it's finished doing whatever it actually does.
Code:
REGEDIT4
[HKEY_LOCAL_MACHINE\init]
"Launch58"="RunCC.exe"
[HKEY_LOCAL_MACHINE\Software\HTC\RunCC]
"script"="\\windows\\runcc.lua"
"UIMode"=dword:00000001
"TurnOffRadio"=dword:00000000
"RecoveryType"=dword:00000002
"TodayDelay"=dword:00000000
[U][B]"ResetDevice"=dword:00000001[/B][/U]
"ResetUICountDown"=dword:00000005
"LaunchCSType"=dword:00000002
"RunCCRunStatus"=dword:00000000
"InitUITopmost"=dword:00000000
"PreCreateUI"=dword:00000001
"EnableTransition"=dword:00000001
"FullScreen"=dword:00000001
"ProgressImgTime"=dword:00000005
"ProgressImgUnit"=dword:00000001
"ShowMessageBar"=dword:00000000
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ZZ\PIEPreLaunch]
"Cmd"="PIEPreLaunch"
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\MASD]
"RunCC"="1_1_b_0"
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Build_Order]
"RunCC"="0"
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PKG]
"shadow"="1"