Hi guys/gals
Ok im not a newbie here and have flashed many phones with cooked roms .
Now is this just me i just dont understand how to flash my magic . i have downloaded everything to my laptop , vista 32 bit ,
i connect my phone then phone askes me to mount sd card , no options to install new drivers for the phone or just use to use the phone and not no the sd card .
So how do i get it to see my phone so i can install new drivers for it that came with the stuff i downloaded ? do i need to put the phone in bootloader ?
i have debugging ticked and everythimg on the phone i just cant get the pc to see my poor magic ,
and another thing in wikki it says open dos to files and cd ?????????? what the hell is this lol how do i do that , any help would be fantastic as i want to play around with my magic , i guess its like a kids birthday getting a presant and not knowing what to do with it sigh
Im all for learning and finding stuff out for myself but in this case their is so much conflicting info around on google which to trust and which not to . i have seen people have had probs getting vista to install the correct drivers but no answer to the problem ..... also i have not even got that far as my pc wont see my little magic .....its not magic to me yet
Thanks in advance for any help given tc guys and gals
Having stayed away from Vista thankfully I can only describe how to really do it in XP but what you basically do is:
1. Connect the phone to your USB and do not select to mount SD card from your phone
2. If you then go to your device manager that shows the list of devices installed under USB you should have something like common device or so forth, if you keep opening them up you will find one that says Android Phone
3. Once you've found the android phone one select to update drivers, then just navigate to the drivers folder on your pc (included in the Android SDK)
Secondly to open dos you go to Start -> Run and type in cmd and press enter, you get a little command prompt box.
As for CD...
http://www.colorado.edu/geography/gcraft/tips/doshelp.html
Read that it'll help you out =o)
great
thanks for taking the time out to help me mate intresting to read an learn dos prompt thanks again mate
lol god dam
ok i have read the page 11 x now , i have my stk files in a folder called new on my desktop.
can i get dos to see it can i hell lol noooooooooooooooo why is vista such a pain in the ass
also what cd am i ment to be getting dos to see ?
i feel such a noob again .
ahhhhh htc touch is so easy to flash lol this is a pin in the ass lol
ahh
ahhh cd to the tools !!!???
You can get to your desktop from command prompt but think its under something like:
C:\document and settings\yourname\desktop\ or something similar, i would recommend just copying the folder to c root so its something simple like c:\android\sdk\tools or something.
just keep looking around and checking with DIR whether your in the right place =o)
thanks
Thanks again for your help .
Ok i have found all that now with command promt with your help of course ,But its a big prob with vista a lot of people are having problems installing the drivers for htc magic as vista keeps installing th default divers and you cant turn it of even if you tick do not update drivers it updates them with no option to install drivers . also you cant update the driver iyourself after that as vista says you already have the best driver for it ! Their are hundreds of posts about this problem with lots of ways round it but none actualy work .
you cant even install adb or fast boot .
GOD DAM VISTA . ASTA LA VISTA when or if i find a solution for this . Once again thanks for your help .
Oh to add all the people having problems like me have connected their phone up first without having the development ticked . and vista installed drivers for that . which is part of the problem one guy has it working but only by installing vista again . now thats going a bit far in my eyes lol
Just one problem thread regarding issues with what i have said none of the methods listed work !?????
http://code.google.com/p/android/issues/detail?id=1039 Im again vista 32
ok
Ok i found this by playing with my pc after much hassle from vista here is what what i found.
Use a different usb cable (i used my other htc cable) dont ask me why but it will see the devise as htc phone usb . now download the new driver below .
goto devise manager now look for portable devices , you will see android phone . click update driver now click have disk point to the driver below and yeppppp it trys to install it ,, now the prob i have is windows found driver software for your device but had an error when trying to install it . device can not start code 10 .android sooner adb testing interface . now thats the first ime i have seen adb testing blah blah so i must be on the right track . sorry im just trying to put as much info down as poss , so we can try work this out as many people are having the same prob but why ???file is not uploading but can be found on the link in my post above this one
also the prob with fastboot is you run it and it says this application has failed to start because adbwinapi.dll was not found . re-installing the application may fix this problem but does it ????? does it hell lol
we love vista not
I have rooted my HTC magic using windows 7, to get the driver to install have you turned on the USB Debugging, when I did this it required a new driver when I connected the USB cable again.
Setting can be found in Settings - Applications - Development - USB Debugging
Then i followed the wiki guide found on another thread on this forum category
Hope this helps
Mark
hi
Hi mate USB Debugging is already turned on mate thats the first thing i did buddy , thanks for taking the time to read and reply buddy its so annoying all i wana do is flash lol
I think its to do with when i first connected my phone to the laptop i did not have it ticked and vista installed its own drivers . but now i want to flash with debugging ticked it wont find anymore drivers nor let me choose drivers . google is flooded with people having the same prob ??? lets ask all so helpfull microsoft why haha hahahahah best joke this year their vista support is run by donkeys
ok
Ok after 5 hours of looking reading and searching i have decided that at the moment their isno way around this on vista it is for many reasons the drivers are not written for vista , the way vista installs drivers with no way of updating or turning of auto install !!!!! so il say it again god dam vista
Related
Please dont get mad i looked every where to see if this had already been posted. When i run Hard-SPL I keep geting to 260 error it starts just fine asks me if i will grant access to the application which i do and it starts to do its thing but then halts and i get the 260 error and it dose not go any farther any suggestions?
did you remove your sim and sd card?
In addition, if you have not removed them back up your data. Then do a hard reset. Then remove sim and sd card. It maybe an open port problem so restart your computer as well. Hope this helps.
tried
Gave that a try after it asks if it is alright to load the file on my phone it auto resets phone then 260 error happening again im on vista 64 bit and even tried what the main website said for vista users but half the guide dose not really apply so im not sure what to do or what im doing wrong. any more suggestions?
Need Help
Anyone that has been able to run HardSPL on a vista 64bit system please point me in the right direction I really want to set up my custom roms on my phone that I have found! Please help!!!!!!!!
sorry i couldn't help you i always thought a 260 error was due to open connections or ports.
When you downloaded the zip file for hardspl did you use vista's unzip?
If so you may get an error because vistas unzip program sucks ass and you need to use another application to unzip the hardspl software.
crazigamer said:
Anyone that has been able to run HardSPL on a vista 64bit system please point me in the right direction I really want to set up my custom roms on my phone that I have found! Please help!!!!!!!!
Click to expand...
Click to collapse
Did you go through the connection settings in the mobile device manager and disable usb connections?
Are you using vista..sometimes it doesnt look for a new set of drivers for the Phone when its in tri color mode..try rebooting and leaving the phone in tri color mode...once you do that, start from scratch after it gets all the drivers installed
This advice is thanks to tochill. Try this and see if it works. Vista often does not automatically load the drivers. I used Vista 64 to flash without a problem. It was a little tricky to get it to load the drivers at first but after they are loaded you should be fine. If it doesn't work let me know and I will see if I can find the drivers for it.
Also make sure you have the most updated version of Windows mobile device center.
not sure what to do
When am I suppose to disable usb connections of the phone in WMDC ? and also I used winrar to extract the folder. also the phone auto reboots after it is promted to allow the program to launch to install hardspl and then I get the same 260 error again any more suggestions? Im sorry for all the trouble here I just really want to get this to work. everyone said it was easier to mod tilts but it seems to be harder then my iphone lol
update ur drivers if ur using vista
for me vista was a pain to flash so i just use my desktop which is xp and its happy flashing for me all the way...piece of cake now after u do it a few times
crazigamer said:
When am I suppose to disable usb connections of the phone in WMDC ? and also I used winrar to extract the folder. also the phone auto reboots after it is promted to allow the program to launch to install hardspl and then I get the same 260 error again any more suggestions? Im sorry for all the trouble here I just really want to get this to work. everyone said it was easier to mod tilts but it seems to be harder then my iphone lol
Click to expand...
Click to collapse
Before you connect your phone.
You don't need to do any of that. What you need to do is DL the USB driver from A/S & associate it with you device in WMDC. There are several good threads on doing it. Start Here: http://forum.xda-developers.com/showthread.php?t=291723
Even tried xp
I have even tried using XP I still get the same outcome my phone auto restarts after I tell it to run the program. What am I doing wrong? I am suppose to run the main file off of my PC not the phone correct? and just go trough the setup?
Can some one tell me how they did it step by step because I have followed the instructions on the HARDSPL main thread and it dose not work. And so I am correct this will work with the new ATT Tilt right?
tried all of that still dose not work any other vista run arounds? God i wish i still had my xp discs
Please feel free to message me on aim username is kl3pto really could use some help.
GSLEON3 said:
You don't need to do any of that. What you need to do is DL the USB driver from A/S & associate it with you device in WMDC. There are several good threads on doing it. Start Here: http://forum.xda-developers.com/showthread.php?t=291723
Click to expand...
Click to collapse
Thanks that was a thread I was looking for to post to the OP as the next step. I have had to reinstall vista 5 times and each 5 times had to do something different to get it to work.
NP, I also suggest with Vista, you flash HardSPL via Jump. Don't flash ROM's or Radios with JumpSPL, but with the 1.93 SPL, I have tons more success using the Flash HardSPL method than the .exe
Hi,
My name is Joe aka AndroidSamurai.. I will be releasing more guides and media content in the weeks to come.
I'm currently very busy with "life events(new baby)" and apologize for my absence.
I will be updating this post since it was my original with a new guide updated to new SDK and Android methods.
Thanks again,
AndroidSamurai
Android4D Inc
<golf clap>
Well done.
</golf clap>
What do i do if the new hardware device notification doesnt pop-up ? NM i got it. Thanks for the writeup
@King_tee: Assuming windows, you follow the following steps.
1. Start > Control Panel > System.
2. Hardware > Device Manager
3. Click on the last icon below the File menu. It should correspond to "Scan for Hardware Changes."
If that doesn't work, try unplugging / replugging USB cable, different USB cable, restarting phone, restarting computer, etc.
If you never see the notification, navigate to the Device Manager(inside "System" in the control panel in XP and inside Device Manager on Vista).
You will see ADB Android Device at the top of the list with a Yellow Icon beside it meaning the device is not working. Right-click on the device and select "Update Driver".
Follow the dialogs that pop-up and navigate to where the unzipped drivers are at...
You should be good to go from there...
ok, i need some help please... I downloaded the SDK and followed the instruction in this thread, but when i try to update my driver for the phone, it says the driver is not compatible with my phone.. I am using Haykuro's ROM 4.5 with FW 1.5.. would that be the reason for this issue?
devildogg2001 said:
ok, i need some help please... I downloaded the SDK and followed the instruction in this thread, but when i try to update my driver for the phone, it says the driver is not compatible with my phone.. I am using Haykuro's ROM 4.5 with FW 1.5.. would that be the reason for this issue?
Click to expand...
Click to collapse
you may need to uninstall the current driver for your phone if you have mounted it before downloading the SDK. if you don't have the SDK setup the first time you plug the phone in then your computer will auto-update the driver to a regular UMS driver and it won't help you when you try adb. i forget how to uninstall your current driver since i don't use windows, but i'm sure you can find a nice crash course online
tubaking182 said:
you may need to uninstall the current driver for your phone if you have mounted it before downloading the SDK. if you don't have the SDK setup the first time you plug the phone in then your computer will auto-update the driver to a regular UMS driver and it won't help you when you try adb. i forget how to uninstall your current driver since i don't use windows, but i'm sure you can find a nice crash course online
Click to expand...
Click to collapse
I dont know if thats the problem because when i plug it in, it doesnt show up as a notification, and when i go to the device manager it shows the little yellow triangle.. I'll look again. Thanks for the quick reply though. I am no expert in linux, but i have it installed, let me see if i can figure it out there..
tubaking182 said:
you may need to uninstall the current driver for your phone if you have mounted it before downloading the SDK. if you don't have the SDK setup the first time you plug the phone in then your computer will auto-update the driver to a regular UMS driver and it won't help you when you try adb. i forget how to uninstall your current driver since i don't use windows, but i'm sure you can find a nice crash course online
Click to expand...
Click to collapse
ok, so i am in linux now, and i just noticed this guide was for windows.. lol can you or someone tell me how to install the SDK on linux?
devildogg2001 said:
ok, so i am in linux now, and i just noticed this guide was for windows.. lol can you or someone tell me how to install the SDK on linux?
Click to expand...
Click to collapse
Downloading
http://developer.android.com/sdk/1.1_r1/index.html
Installing
http://developer.android.com/sdk/1.1_r1/installing.html
Found through Google...imagine that.
as well as what xyrcncp said can you you can download it and just mv ~/Desktop/sdk/tools/adb /usr/bin/adb abd you should be able to run the adb commands from any directory. not too hard to cd to the correct directory but i personally don't like to type cd ~/Phone/tools/android-sdk/tools every time cause i tend to make typographical errors. let me know how it worked but you shouldn't have any problems at all
umm no offense but your writing a tutorial for people that are not sure on how to do this, so you must assume that they do not know how to run an executable file...... write yourself a better tutorial without actually bashing the self esteem of some people... tutorials are positive not negative. I already know all of this but still... dont degrade someone due to the fact they dont know how, thats the whole point of writing your tutorial. Nothing should have been left out (including how to run a .exe .com or .bat
" (If you do not know how to install a windows executable file, please kill yourself now! ) "
this isnt honestly written with any hatred towards you, it was a good tutorial. Just might want to think about how you write it next time.
The "bashing" comments in my tutorial are directed towards the people with a true sense of humor. My tutorial was written to tell you how to simply complete a task and not to make you feel better about yourself. I do not get pleasure in abusing people's self esteem nor do I enjoy putting people down.
Just because you got a little sand in your crack does not mean you need to come in a very honest and informative thread and start bashing the people who are bending over backwards to help everyone out.
The reason I created this "tutorial" in the first place was because all the other threads are full of "start searching and stop asking so many damn questions" comments.
So start looking in the mirror when you wake up in the morning and stop saying "My, I think I will run over to good ole' XDA and be an @$$ to everyone today".
I am sincerely sorry that a little sense of humor has caused so much hatred in my thread. Please contact the forum moderators and see if the think my tutorial is so hateful.
lol i dont see any hatred but anyway when i download the adb driver when extracting it says unknown method
@ Nabzilla1990
Are you using Windows or Linux?
Are you using the built-in Zip tool or 7-zip from the links I provided?
Are you using a 32 or 64-bit OS?
using the same operating system as you 64bit vista ultimate sp1 and using winrar to extract
Try using 7-zip man, I have been using it for 3 yrs now.
Basically what I am saying is that everything in my guide is guaranteed to work.
Just to add, if you take adb.exe and adbwinapi.dll and copy or move them to the \windows\system32 directory you can run adb from any dos directory prompt.
it worked with 7-zip thank you and also want to add if it doesnt work for some people plug in ur phone and update the usb mass storage with the usb driver from here and it should work i had that problem earlier
Okay, so I did everything and got up to run cmd, when I type in the cd C:\android-sdk-windows-1.1_r1\tools it says not a specififed folder, but when I type it without the \tools it doesnt work. can anyone help?
Ok first off thanks for your help in advance. 2cd here is my issue. i have scoured google for help. Nothing that really works. Superoneclick will not work. i simply get the "waiting for device" all the time. Other methods i have tried will not work . I have used terminal but the adb file does not have a "su" file in it. did they remove it from the android sdk?
ok here goes.... i have a mac. NOT A PC.. A MAC... i do have parallels with windows 7 ultimate edition. Running windows apps in a virtual environment is not the same.. trust me i have tried. i an looking for a step by step explanation on how to root a samsung transform on a mac. please do not point me to the "epic" forums. i tried that. even watched the video. once again.. no "su" file in the sdk. Im not a total nood but i am new to android. Please if anyone has successfully rooted there transform please list STEP BY STEP instructions. Do i unmount the sd card? uncheck usb debugging first then check later? or should it be checked from the beginning? what do i need to install.. on a mac.... or can i install the windows files to windows on the VIRTUAL machine and it work?
When i plug my phone into the mac all i get is charging.... thats it. Never tells me its plugged in .. nothing. Syncmate does not pop up. even with the sd card mounted it doesnt show up in my mac. nothing.... how do i even get the phone to show up
I am tired and have a headache searching so hard. Is it just me or has google gotten worse with time. Some of the main search returns on the first page are so irrelevant its crazy. I have windows mobile phone and dare i say it.. getting the hard spl loaded to unlock the phone is super simple. Maybe its because this phone is kinda new but still i am having alot of trouble. There has GOT to be some mac users out there that have rooted this phone........ please help !!!!!!!!!!!!!!!!!!!!
anyone here who can help me with installing Android SDK/ADB/usb driver/whatever it is? well im just copying this guide
androidcentral.com/sdk-driver-root-oh-my (cant put links)
but i keep failing at this part
Select "Browse my computer for driver software."
Now browse to the SDK folder, and point Windows to the folder named usb_driver. Click the image below to enlarge it and see the usb_driver folder inside your Android SDK.
Click to expand...
Click to collapse
when i click next it stops and then this shows up
gyazo.com/e2e6f992cb594b750a5359ecbe161184.png
i wasted 4 hours on this already and i feel really stupid
would appreciate it very much if someone could help.
by the way i reinstalled it, then tried to do it using this guide adrynalyne.us/files/How%20to%20install%20adb.pdf
all was going good until i tried to plug my phone while the USB Debugging is turned on, it won't even show the option of "Locate and install driver software."
i tried to check device manager but i cant find adb in there to load it or something. oh and i found many new i haven't seen before, like Android USB Device, Android phone, etc.
someone on another forum suggested that i download htc sync 3.0 too, so i did, but i dont really have any idea how to use it
sorry if i seem stupid, just really really new to this, got an android phone for xmas as a gift
Search for phone drivers on the manufacturers website and of you are on 64 bit, get 32 and 64 bit drivers
Sent from my Epic that craves frozen yogurt
Hi All,
I just tried to connect my TF101 to an old WinXP box and got the error above when installing the driver from the Asus site, the solution after looking here was to install the Microsoft User Mode Driver Framework for WinXP here. I think this fix applies to all android devices but I figured it was worth a post if it saves some TF users from a long search.
Thank you for this, helped me fix it after searching around for 2 hours!
thanks heaps
You are a legend. Samsung should put this on their site. I couldnt get my Samsung Galaxy S II to connect, installing the Framework and then uninstall and driver and plug phoneback in then worked.
WORKED LIKE A CHARM!!!
POST THIS IN SAMSUNG WEBSITE
This driver package solves the Error code 28
for MTP device as samgung, then it works in Kies.
Hey thanks for the info +1
Thanks it works
equal or better file already installed on this computer
I get the same INF error when I try to hook up my video camera. I tried to download the file but received a message stating that I already have an equal or better one already. Obviously that is not correct because it is not working.
I am lost and can no longer put my videos from Panasonic Mini DV on my computer.
Any chance anyone knows how I can fix this..thanks!!
Gigsee, what operating system are you experiencing this on?
The help above is specifically for WinXP, it *may* be applicable to Vista also but will certainly not apply for a Win7 box because the usb driver stack is totally different there.
You'll have to help me out by giving step by step instructions of what your clicking and what your seeing at the time to pinpoint your problem and please be very specific with the wording of any errors your seeing.
Reply with something like;
1- click start> settings > control panel > system.
2 - open device manager tab.
George
Hi George - Thank you for taking the time to try to help me. I have an HP that is running on Vista Home.
I have tried to add the video camera several ways. One way is to open Movie Maker and add video camera. I also just hook the video camera up to the computer. I've tried a USB cord and HP told me I needed an IEEE 1394 cord, but that made no difference. I've tried going through the control panel to cameras and adding a camera. No matter how I try, it always does the same thing:
1) I plug in the USB cord. I instantly get this message: USB Device Not Recognized.
2) Control Panel; Scanners & Cameras; Add Device
3) I am sent to the Welcome to the Scanner and Camera Installation Wizard
4) Next; I have the box asking me if I want to select the manufacturer from the list (only my old printer is on the list) or to select that I have the manufacturer's disk
5) Have Disk
6) Message says to the Insert manufactures installation disk, which I do. It asks me to copy manufacture's files from:
7) I hit browse and change drive to E (since that is my disk drive).
8) A list of 6 files come up. Acrobat Reader, DV Studio3, USBDriver, ArcSoft, G726, AUTORUN
9) The acrobat, dv studio, arc soft all upload correctly. When I hit the USB Driver, it takes me to another screen that says DRIVERS. At this point, the file name gets automatically filled in as "AUTORUN.INF" When I click "OPEN" I get AUTORUN.INF File not found. Check the file name and try again.
note: It used to be that when I hooked up the camera to the computer, It would automatically detect it and try to connect with it. It was then that I got the error above about "A Service Installation section in this INF is invalid." Now, it doesn't even let me get that far.
I hope I was descriptive enough..thanks so much for trying to help me!!
Patti
I had the same issue with ASUS Transformer Prime TF201 connecting to WinXPSP2. Solution worked immediately. Thanks to original poster.
confirmed fixed issue with samsung vibrant! thank you
Hi !
I've got a Samsung Galaxy S2 SGH i777. I've been trying to connect it to my laptop ( now xp sp3 ) for a few weeks now.
I've tried almost everything :
-updated sp2 to sp3
-uninstall and reinstall drivers manually
-tried suggestions from android and xp forums : tried every connection mode, every usb port, code error 28 suggestions, .Net framework update , updated windows media player "mode", and some others ... even trying this Microsoft User Mode Driver Framework.
But no success. I've always had this annoying " A service installation section in this INF is invalid " message.
Until yesterday when I found this site and followed divadrummer 5 steps :
fixya.com/support/t221754-service_installation_section_in_inf
( as a knew member I cannot post outside links for a while - so you need to supplement the above line with the usual "stuff" like "www"
I've found the "inf" file in the windows hidden system.
Hope I could help .
Thank you very much!
Galaxy SII - MTP INF Issues
This is the EXACT issue I've been having. I'm thrilled to see it on XDA since I know there's so many competent people out there just brimming with eagerness to help me figure this out. (Or at least you're borderline willing)
Device: Samsung Galaxy SII Sprint SPH-D710 (i think)
OS: ICS
Computer: Dell Latitude d610
OS: XP SP3
As you know I connect my phone to the computer, it recognizes new hardware and attempts to install it. The only way to get the computer to recognize the phone in My Computer is by connecting as a digital camera and even then the VAST majority of my files are unavailable.
1. I installed the link provided by the original poster.
2. I uninstalled my phone by the device manager and in fact by removing the samsung phone drivers that I had earlier installed.
3. I then plugged my phone back into the computer.
4. I installed the Samsung drivers again
5. I allowed the "found new hardware to run its course.
6. I receive the attached screen shot with the error stating "An error occurred during the installation of your device. The required section was not found in the INF.
I have tried to follow the instructions above and I think the User Mode stuff sounds promising.
Next I attempted another fix at the link below:
fixya.com/support/t221754-service_installation_section_in_inf
The link had the following instructions: (Thanks Divadrummer)
"If the player is showing up in your Windows' Device Manager under "portable devices" with a yellow "!":
1.) Right-click the yellow "!" and choose "update driver".
2.) When given the option to connect to Windows Update, choose "no, not this time" and click next.
3.) Choose "Install from a specific location (advanced)" and click next.
4.) Choose "Don't search. I will choose the driver to install" and click next.
5.) Click the "Have Disk" button. Browse to C:\Windows\inf and choose the file marked "wpdmtp.inf"
I can't believe the generic players have such crappy support when so many people have this problem! I think the Windows file problem might be caused by "compressing old files" when you do a disk cleanup."
After doing as advised I found no wpdmtp.inf file. SO... I did what any amateur computer guy would do. I googled the file and downloaded it directly. I placed in in my INF directory and then tried to do step 5. I still experience the same error.
Suggestions and inquiries are welcome and encouraged.
Thank you in advance.
thanks
bstdnator said:
Hi All,
I just tried to connect my TF101 to an old WinXP box and got the error above when installing the driver from the Asus site, the solution after looking here was to install the Microsoft User Mode Driver Framework for WinXP here. I think this fix applies to all android devices but I figured it was worth a post if it saves some TF users from a long search.
Click to expand...
Click to collapse
I wasted an entire day scouring for a solution and yours was it!! I owe you alot!! I registered just to thank YOU!!:good:
I had XP w/ Gnex JB 4.1.1 and all I was doing was hitting walls. I tried more crap than you can imagine! Installed every driver scheme ever mentioned, installed WMP11, Installed SDK Manager.................
What a freakin' nightmare.:crying: And then, your suggestion with the MS framework. Worked instantly!! THANKS A MILLION!!
All day I screwed with this when I had not a second to waste on something like this. Why oh Why do I dig my heels in!!?? At least it worked!!
Absolute legend!
I've spent 3 days mucking around trying to connect my Galaxy S3 to connect to my Windows XP pc to no avail. 5 phonecalls to Samsung which did nothing. Read your post installed the driver you linked to and bam it's working.
Thank you Thank you Thank you. You have saved my sanity!
bstdnator said:
Hi All,
I just tried to connect my TF101 to an old WinXP box and got the error above when installing the driver from the Asus site, the solution after looking here was to install the Microsoft User Mode Driver Framework for WinXP here. I think this fix applies to all android devices but I figured it was worth a post if it saves some TF users from a long search.
Click to expand...
Click to collapse
this was an awesome cure. Helped me install my new Motorola Electrify M XT901. Keep up the good work!
I experienced same problem. but whe n updating new UMDF it says " an equivalent or newer version of UMDF is already installed on this system".
I tried to uninstall this old UMDF but I can't find it in the directory.
Please I need help.
not working for my xp system
and s3
Work on my htc one s Thx Bro :good: