I upgraded the OS on my rom (I took a rom from the Jade forums and extracted xip and imgfs, a new 21728 OS) following http://www.bepe80.com/test/2/. It built everything ok and I followed the directions exactly. Except the only problem is when I flash it to my phone, the first screen comes up with the red text at the bottom, the console eMo text with the version and radio numbers, and then it freezes there and won't continue to boot. I can reflash via SDCard so I'm not worried about my phone. I just want to fix my ROM and upgrade it successfully. What did I do wrong? I need to get my rom to work. Please help? Any suggestions?
kickindrummerkid said:
I upgraded the OS on my rom (I took a rom from the Jade forums and extracted xip and imgfs, a new 21728 OS) following http://www.bepe80.com/test/2/. It built everything ok and I followed the directions exactly. Except the only problem is when I flash it to my phone, the first screen comes up with the red text at the bottom, the console eMo text with the version and radio numbers, and then it freezes there and won't continue to boot. I can reflash via SDCard so I'm not worried about my phone. I just want to fix my ROM and upgrade it successfully. What did I do wrong? I need to get my rom to work. Please help? Any suggestions?
Click to expand...
Click to collapse
You can re-flash using the bootloader mode and USB or using SD Card, don't worry I think all chef's have created a non booting ROM. It's probably just a bad XIP port.
Ta
Dave
thanks for you help. did you read my post completely? Flashing isn't the problem. "I can reflash via SDCard so I'm not worried about my phone". But thanks for your help, I just need to know why the port was bad because I followed the tutorial exactly. Any suggestions? Is the video correct with porting xip? Or do you have to do something different for kaiser?
kickindrummerkid said:
thanks for you help. did you read my post completely? Flashing isn't the problem. "I can reflash via SDCard so I'm not worried about my phone". But thanks for your help, I just need to know why the port was bad because I followed the tutorial exactly. Any suggestions? Is the video correct with porting xip? Or do you have to do something different for kaiser?
Click to expand...
Click to collapse
Try porting the XIP again. I'm not an expert on it. But Usually with cooking it's trial and error, try not to do everything at once. Do a step, cook a ROM, test it, try the next step and so on.
Good luck,
Dave
kickindrummerkid said:
thanks for you help. did you read my post completely? Flashing isn't the problem. "I can reflash via SDCard so I'm not worried about my phone". But thanks for your help, I just need to know why the port was bad because I followed the tutorial exactly. Any suggestions? Is the video correct with porting xip? Or do you have to do something different for kaiser?
Click to expand...
Click to collapse
what part of new xip did you put in new rom? the only part of new os xip that you use is shared xip(msxipkernel), the rest is from your original kaiser rom.
kickindrummerkid said:
thanks for you help. did you read my post completely? Flashing isn't the problem. "I can reflash via SDCard so I'm not worried about my phone". But thanks for your help, I just need to know why the port was bad because I followed the tutorial exactly. Any suggestions? Is the video correct with porting xip? Or do you have to do something different for kaiser?
Click to expand...
Click to collapse
I am trying to figure out the same thing as well! If did find out why, just let us know in here...
I think I fixed that problem by changing SYS!
Related
Hi guys i'm pretty new in this scene and i did something stupid...
i've downloaded Win Mobile 6 from usenet and installed it without reading
anything. At 95% of the installation it hangs and when i try to recover it doesnt work. Now i only have the screen with the green red and blue at the background. I've tried a hard reset but that doesnt work either and i tried to search by google and found nothing.
Am i right that i had to remove some kind of G4 lock? And does somebody know how to help me getting things started again.....
thnx in advance.
greetz
JohnGotti
do your carriers flash and let it fully finish. Once thats done, read a little on making sure your device is unlocked and once you get that done, youll be ready to move to the next level.
what your device is g3 or g4?
how do i perform such a flash and how can i see what kind of G3/4 i have??
If you got a G4 or G3 IPL/SPL 2.x:
Try flasing wizard_love rom from the bootloader screen.
If you got IPL/SPL 1.x:
flash button_rom from the bootloader screen.
damn thats a whole mouth full and i dont get it how its intended.....
perhaps you can tell me in dutch or in a language a stupid fool can understand
JohnGotti said:
damn thats a whole mouth full and i dont get it how its intended.....
perhaps you can tell me in dutch or in a language a stupid fool can understand
Click to expand...
Click to collapse
See you're private messages!
ok thank you
i have the same problem..and i've tried all versions,RUU_mUn_aRTM_10_2_0_8_WWEx.exe, Wizard_Love_2[1].26.10.2_WWE_Novii_CF2.exe, Molski[1].Biz_AKU3.3_21911_8MB_Crossbow.rar...and now when i open it, shows me for 1 second the bootloader screen, and then it's shutting down himself..what should I do???
ady_uaic said:
i have the same problem..and i've tried all versions,RUU_mUn_aRTM_10_2_0_8_WWEx.exe, Wizard_Love_2[1].26.10.2_WWE_Novii_CF2.exe, Molski[1].Biz_AKU3.3_21911_8MB_Crossbow.rar...and now when i open it, shows me for 1 second the bootloader screen, and then it's shutting down himself..what should I do???
Click to expand...
Click to collapse
You should provide more information... What phone model is this? Is it a G3 or G4? What is your IPL / SPL? What did you do before this started happening? Was the battery fully charged before you started this process? Did your PC give you errors when you tried to do teh initial flash that started this process?
The more information you provide the better we can help.
If your phone won't stay turned on when its on the bootloader (rainbow screen) then either your battery is almost dead, or you may have bricked your phone. But we need more details.
this happened to me once, i almost had an heart attack.. but anyway.. what u get there is the bootloader mode, which is you can still save the phone.. when this happened to me, all i did was, i upgraded to original tmobile rom, and from there i ve used shell tool to upgrade to wm6 (my wizard is not unlocked but shelltool takes care of that and u dont have to worry).. its really easy.. let me know what happened.. no worries
Dont worry guys... I think most of us here, faced the same things before, Me included.
Everybody here is quite nice and will help u in any way we can..
Just do some research and fact finding before u flash your rom..
One of the article that I think is very helpful to me is Dr P post on how to unlock and flash your wizard.
If you have any problem or question after reading that, just ask.
Hopefully u can find your answer and your wizard are all healthy..
mfrazzz said:
You should provide more information... What phone model is this? Is it a G3 or G4? What is your IPL / SPL? What did you do before this started happening? Was the battery fully charged before you started this process? Did your PC give you errors when you tried to do teh initial flash that started this process?
The more information you provide the better we can help.
If your phone won't stay turned on when its on the bootloader (rainbow screen) then either your battery is almost dead, or you may have bricked your phone. But we need more details.
Click to expand...
Click to collapse
my phone is G4...first, when i tryed to change the rom, on 95% was blocked..and i have wait about 20 minutes, and nothing...the spl is....01...the battery was quite full, but after several tries, i don't know now how it is (i supose to be from the battery, but i still need a very good rom for it)
ok.. here are the steps.. its very easy.. i had the samething..
your phone is probably CID locked and you will need a shelltool to install that ROM.. so what you need to do is just download the original tmobile ROM.. and connect the phone and install the original ROM.. You didnt birck the phone because you get the bootloader screen.. which means, you can still save the phone..
anyway.. connect the phone via usb and install after you install the original wm5, download the shelltool from here and follow the instructions.. and install the ROM via shelltool.. Then you should be good to go with the new
wm6.
http://forum.xda-developers.com/show...ght=CID+unlock
ok, but where can i get that original rom?
rom
ady_uaic said:
ok, but where can i get that original rom?
Click to expand...
Click to collapse
if you cant get the tmobile rom
use the wizard love rom you can get it from here http://rapidshare.com/users/EXGZ7T
flash this rom not using the shell tool once flashed the use the shell tool following all the instructions and it should work
now i've installed RUU_mUn_aRTM_10_2_0_8_WWEx.exe (i've tried and that version also, but same situation) and after reflashing, it shows me windows mobile screen, and then restart the phone...what should I do??? i've tried many roms...could someone please give me an original rom, in english?
ady_uaic said:
now i've installed RUU_mUn_aRTM_10_2_0_8_WWEx.exe (i've tried and that version also, but same situation) and after reflashing, it shows me windows mobile screen, and then restart the phone...what should I do??? i've tried many roms...could someone please give me an original rom, in english?
Click to expand...
Click to collapse
Simple: Go to the Wizard Upgrading forum and in the stickies is a post by Dr. Putingham on how to CID Unlock your device. Scroll to the bottom of the first post and there is a direct link to pull the Tmobile 2.26 official ROM.
But as EasyMob suggested (and gave a link to) you may be better off with teh Wizard Love rom since you are a G4 device. Wizard Love ROM is very good at recovering G4 devices.
mfrazzz said:
Simple: Go to the Wizard Upgrading forum and in the stickies is a post by Dr. Putingham on how to CID Unlock your device. Scroll to the bottom of the first post and there is a direct link to pull the Tmobile 2.26 official ROM.
But as EasyMob suggested (and gave a link to) you may be better off with teh Wizard Love rom since you are a G4 device. Wizard Love ROM is very good at recovering G4 devices.
Click to expand...
Click to collapse
OK..I'm agree with you, but please understand: I've tried that version too...same situation...please give me the link with the Tmobile 2.26 official ROM
ady_uaic said:
please give me the link with the Tmobile 2.26 official ROM
Click to expand...
Click to collapse
If you read my previous post, I gave you exactly how to find the link (Hint, its in the first post of Dr. Putingham's sticky in the Wizard Upgrading forum and the title is about How to CID Unlock your device. Was that too hard?
i believe you, but i can't find it...and about 3 days i'm hopeless, because with any ROM version, the phone is still restarting, after reflashing (i didn't flash it with tmobile original rom)...please please, give me the link of the topic...
I am in dire need of some help when it comes to flashing custom ROMs. It appears that I can no longer flash custom ROMs. I can successfully flash the official 1.62 ROM from HTC website, the dumped TILT ROM, the Kaiser dumped ROM, and the WM6.1 WWE 3.03.405.0_radio_sign_25.70.40.02_1.64.06.04, but any other ROM I can’t. Let me explain my meaning of not being able to flash a ROM. Once it flashes 100% and reboots, when the “Tap the screen to begin to set up your windows-mobile device” is supposed to be displayed, all I get is a blank white screen. If I touch my stylus to the screen the text shows up, but none of the colored pictures that suppose to be in the back ground. Every section of the setup just displays the text no background images. Even my today screen won’t display any background images.
Does anyone have any information on this? I’ve abused this thread http://forum.xda-developers.com/showthread.php?t=314615 like a cheap dirty whore trying to find a solution, but no avail. Any help will be GREATLY appreciated.
kjones2k1 said:
I am in dire need of some help when it comes to flashing custom ROMs. It appears that I can no longer flash custom ROMs. I can successfully flash the official 1.62 ROM from HTC website, the dumped TILT ROM, the Kaiser dumped ROM, and the WM6.1 WWE 3.03.405.0_radio_sign_25.70.40.02_1.64.06.04, but any other ROM I can’t. Let me explain my meaning of not being able to flash a ROM. Once it flashes 100% and reboots, when the “Tap the screen to begin to set up your windows-mobile device” is supposed to be displayed, all I get is a blank white screen. If I touch my stylus to the screen the text shows up, but none of the colored pictures that suppose to be in the back ground. Every section of the setup just displays the text no background images. Even my today screen won’t display any background images.
Does anyone have any information on this? I’ve abused this thread http://forum.xda-developers.com/showthread.php?t=314615 like a cheap dirty whore trying to find a solution, but no avail. Any help will be GREATLY appreciated.
Click to expand...
Click to collapse
are you using 6.1 radios or the 6.0 radios?
P1Tater said:
are you using 6.1 radios or the 6.0 radios?
Click to expand...
Click to collapse
For each ROM, when ever I flashed, it changed my radio. For instance Alex's 1.62 rom, when I flashed his ROM, it already to changed my radio to the need radio to 1.27.14.09
kjones2k1 said:
For each ROM, when ever I flashed, it changed my radio. For instance Alex's 1.62 rom, when I flashed his ROM, it already to changed my radio to the need radio to 1.27.14.09
Click to expand...
Click to collapse
some come with radios, but most dont. You have to be sure if you need an AT$T specific radio or not.
P1Tater said:
some come with radios, but most dont. You have to be sure if you need an AT$T specific radio or not.
Click to expand...
Click to collapse
When I was running the WM6.1 3.03 ROM with radio 1.64.X.X, I flashed to Alex 1.62 ROM and my radio changed to 1.27.X.X. Didn't this flash change my radio?
kjones2k1 said:
When I was running the WM6.1 3.03 ROM with radio 1.64.X.X, I flashed to Alex 1.62 ROM and my radio changed to 1.27.X.X. Didn't this flash change my radio?
Click to expand...
Click to collapse
yes, if those are the only two flashes you have done, then it sounds like you might have had the unfortunate luck of having a bad flash. Reflash again and see what happens.
Edit:
Did you also do a hard reset at the "tap here to begin screen alingment" screen? If not, always do so.
P1Tater said:
yes, if those are the only two flashes you have done, then it sounds like you might have had the unfortunate luck of having a bad flash. Reflash again and see what happens.
Edit:
Did you also do a hard reset at the "tap here to begin screen alingment" screen? If not, always do so.
Click to expand...
Click to collapse
I always hard reset when flashing new roms (learned alot in the kasier wiki). This is what I'm trying. Flashing to ATT 1.62 (Offical from HTC website) > manually flashing to 1.27.04.09 radio > Flashing to Alex's 1.62 ROM
Anyone else have any suggestions?
I have a few ideas that I think may help. PM me when you get a moment. It may Late saturday or sunday till I can get back to you, but I need to know a coupl of things. So, if you're still stuck, let me know.
GSLEON3 said:
I have a few ideas that I think may help. PM me when you get a moment. It may Late saturday or sunday till I can get back to you, but I need to know a coupl of things. So, if you're still stuck, let me know.
Click to expand...
Click to collapse
PM sent
Check out the ROM Upgrading section of the Kaiser wiki under 'Troubleshooting' to learn how to enter bootloader mode.
Assuming that you installed HardSPL the first time you flashed, once you've booted into this mode, reconnect your device to your USB cable and flash another ROM.
For those who haven't looked at the Kaiser wiki in a while, I've completely revamped it w/TOC pages to make it alot easier to use (shameless plug)
_Alex_ said:
Check out the ROM Upgrading section of the Kaiser wiki under 'Troubleshooting' to learn how to enter bootloader mode.
Assuming that you installed HardSPL the first time you flashed, once you've booted into this mode, reconnect your device to your USB cable and flash another ROM.
For those who haven't looked at the Kaiser wiki in a while, I've completely revamped it w/TOC pages to make it alot easier to use (shameless plug)
Click to expand...
Click to collapse
?? This is not my issue. I'm not a complete beginner when it comes to flashing. Ever since I flashed the WM6.1 3.03 ROM I haven't been able to flash a custom ROM without having an image problem. I can still flash OEM type ROMS without the image issue, but not custom ROMS. I have the problem with images once a custom ROM has been flashed. If more clarification of problem is needed, I am will to give it.
This may be extreme and largely untested, but have you tried 'clear storage' on the WM6.1 ROMs and chosen 'delete NAND' (or something to that effect)?
That should wipe your ROM memory clean, although I'm not sure if that would help or hinder your cause, as I haven't heard anyone try it yet...
Hope this helps!
_Alex_ said:
This may be extreme and largely untested, but have you tried 'clear storage' on the WM6.1 ROMs and chosen 'delete NAND' (or something to that effect)?
That should wipe your ROM memory clean, although I'm not sure if that would help or hinder your cause, as I haven't heard anyone try it yet...
Hope this helps!
Click to expand...
Click to collapse
No, I haven't tried, but I guess I'll give it try when I get back in town on thursday.
Sorry I had to bug out....
Alex, his problem is a little different than a RUUBNH error that's commonly seen. I tried walking him through a CE reset using MTTY & he can't even communicate with his bootloader. MTTY wouldn't establish a USB connection. I agree that formating the Nand may help, but I think you really should also try & reflash hardspl as well. I suggest the new version with AT command support. I have seen a few funky hardspl flashes that inhibit communication, although rare.
I didn't forget you though Kjones, & I'm trying to duplicate your problem & find an answer.
first of all sorry for y English...
Ive been read the threads about that, but ive this problem:
i ve a hardspl 3.29 and trying to downgrade to original rom the flashing process stops at 15%.
i can install only custom rom and so i cant reverting back to original rom and spl.
ive been tried to flash first the spl but not working...
someone can help me please?
thx!!
wow, I don't think I've ever haleard it this way before. Usually you can't upgrade to a cooked ROM, not the other way around.
So, you get no errors while installing a cooked ROM, but it stops at 15% when trying to downgrade...
I know that some shipped ROMs flash the SPL at 15%, so this must be the problem.
Undortunately, I am a lucky one who has never had anything bad happen to me while flashing (besides my laptop running out of battery), so I don't really have much advice to give you, but I'm sure somebody else will.
Sorry, hope it all goes well for you
HardSPL prevents itself from being replaced. You need to run JumpSPL or SSPL-KAIS on the phone when it is running WM as normal, which will switch you to triciolor screen, where you can flash the original SPL.
This should be detailed in the "How to revert to factory state" page in the wiki.
thx but ive been done all and now my kaiser it's brick on bootloader:
dont allow to flash hard spl
dont allow to flash custom rom
dont allow to flsh original rom
Help PLease!!!!!!!
tried with mtty but nothing...USB PORT CAN NOT OPEN
Try that sticky thread? http://forum.xda-developers.com/showthread.php?t=423486
kilrah said:
Try that sticky thread? http://forum.xda-developers.com/showthread.php?t=423486
Click to expand...
Click to collapse
tried but no chance...
my suggestion is to search this forum for "stuck in bootloader"
you're sure to find something there
mbarvian said:
my suggestion is to search this forum for "stuck in bootloader"
you're sure to find something there
Click to expand...
Click to collapse
now...
solved the stuck problem on bootloaderwith mtty for Vista, but with hardspl it's impossible to flash an original rom on the device (flsh stops at 15% error 226-flash error- wath is?)
so...i want to flash an original rom: waht can i do? help needed please...thx!!!
always prpblem in falshing original update...flashing process stops at 15%. ive downgraded at wm6 with spl 3.07.
ERROR 226
I followed all of the steps to flash a new ROM into my tilt. I attempted to install a hard SPL 1.93, but it stuck me at the bootloading screen. I can't active sync because im at the screen and it wont let me. I tried the program mtty, but i cant get it to work because it wont register. it says...:
KAIS1*0
SPL-1.93.0000
CPLD-8
I know i'll probably get banned from the forums, but I'm just hoping someone can give me a quick answer. I appreciate the help.
never heard of that HardSPL, only 3 versions.
Go grab a proper HardSPL (I recommend 3.29) and see if you can flash that, but you should properly study first.
Also, please read the Flashing For Noobs section and DO NOT MAKE NEW THREADS FOR COMMON PROBLEMS
XPhamz said:
I followed all of the steps to flash a new ROM into my tilt. I attempted to install a hard SPL 1.93, but it stuck me at the bootloading screen. I can't active sync because im at the screen and it wont let me. I tried the program mtty, but i cant get it to work because it wont register. it says...:
KAIS1*0
SPL-1.93.0000
CPLD-8
I know i'll probably get banned from the forums, but I'm just hoping someone can give me a quick answer. I appreciate the help.
Click to expand...
Click to collapse
He has a white screen issue. His factory spl is 1.93.0000. Also its not hard spl 1.93.0000 its jump spl 1.93.0000
Go here:
http://forum.xda-developers.com/showthread.php?t=354061
And here
http://forum.xda-developers.com/showthread.php?t=423486&highlight=white+screen
I hope that this works.
Thanks for the responses, but I can't connect my phone to my computer due to active sync not recognizing onto my phone. I installed it and reinstalled it twice. I read everything on the Bootloading screen, but half the programs wouldn't load up. I can't upload anything to my SD card because i don't have a reader.
XPhamz said:
Thanks for the responses, but I can't connect my phone to my computer due to active sync not recognizing onto my phone. I installed it and reinstalled it twice. I read everything on the Bootloading screen, but half the programs wouldn't load up. I can't upload anything to my SD card because i don't have a reader.
Click to expand...
Click to collapse
ok try this just plug your phone up to the usb cable and flash a stock rom. Dont worry about the sync your phone wont sync to your pc when in bootloader. Only a stock rom DONT flash a custom rom. After you flash the stock rom you should be able to start over. I hope that this helps
sorry to sound like a newb but how would I go about doing that? I have it downloaded.. and I ran it on my computer? now what?
XPhamz said:
sorry to sound like a newb but how would I go about doing that? I have it downloaded.. and I ran it on my computer? now what?
Click to expand...
Click to collapse
What installing the stock rom? Yes it has to be run from your pc. I think that you need to read this thread Also
http://forum.xda-developers.com/showthread.php?t=433835
http://forum.xda-developers.com/showthread.php?t=374691
Kaiser Wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
Vol22002 said:
What installing the stock rom? Yes it has to be run from your pc. I think that you need to read this thread Also
http://forum.xda-developers.com/showthread.php?t=433835
http://forum.xda-developers.com/showthread.php?t=374691
Kaiser Wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
Click to expand...
Click to collapse
It worked! I really do appreciate your help! After hours of hoping I didn't brick my phone! Thank you so much.
No problem I remember what it felt like to be new at this. Good luck with your rom upgrades.
Mods please close this thread. Thanks
Does anyone know how to do this? help please
Flash it again with an original ROM.
lol. deedee, did this require you digging into the depths of your brain?
lol, keep it simple, just how i like it
It was one of those flashes of inspiration moments.
Great fan of the KISS school of thought.
lol. nifty.
where would i find an original rom to touch HD?
squirtoise said:
where would i find an original rom to touch HD?
Click to expand...
Click to collapse
Welcome to the forum
Please READ and SEARCH before posting...
Have a look here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
so these roms are .exe files. when i flashed my cooked rom it was a .nbh file and i just put it in the root of my storage card and when to bootloader mode. for this original rom thats an .exe file, how would i flash it? please help me because i don't really know. sorry for the inconviences, im still new to this stuff.
................connect your phone using a usb and make sure an activesync connection is active. Run the .exe and go through all the steps. It starts flashing and the percentage bar shows. It finishes and re-boots. Your done ....
and no need to do a hard reset after flashing original rom
thanks. i have one more question. if i flashed a rom using the storage card method, when i change my rom say to another cooked rom, do i just add the new .nbh file to the storage card and delete the old .nbh file containing the old rom?
Me = n00b
I have a touch diamond (gsm) with 6.5 but I wan't to downgrade to the original 6.1 rom from htc's website. Will hard-spl (olinex) prevent me from doing that?
Thanks in advance
No it wont hurt, in fact the hard spl will be reverted back to HTC original one, so all is well. Dont worry and just go for it... just curious, why you flashing back to original?
timmymarsh said:
No it wont hurt, in fact the hard spl will be reverted back to HTC original one, so all is well. Dont worry and just go for it... just curious, why you flashing back to original?
Click to expand...
Click to collapse
Check out this thread will explain the whole thing, don't wan't to double up the whole forum.
http://forum.xda-developers.com/showthread.php?t=502357
Daan