Related
Hi folks
sometimes it's very annoying when one switched off the voice command because he doesn't like it but everytime a bluetooth headset connects, the voice command gets re-activated again automaticly.
How to switch off it completely?
need the same answer
I needed the same answer
Regards
Hans Kurscheidt
I've searched everywhere but cant find a solution to this: I bought the HTC wired usb headset for the Tilt. With Cyberon voicedial, the button on the headset would activate the app and worked perfectly. As I prefer MS Voice Command, I then went ahead and uninstalled Voicedial and installed VC, but button doesnt work now. Anyone know how to remap the headset button to voice command?
Try this reg, should do it.
Thanks, I'll give it a try...what changes does it make?
Sometimes after installing MS Voice Command you need to do a reset once or twice before the BT headset is reconized properly. (battery out and back in...) And, some BT headsets don't work well at all. MS's BT driver set has a history of being bad.
I think you misread my post...I was asking about the WIRED headset, not the BT one.
okay my question is that the software that came with my tilt- voice dail thing,cyberon will only work if I activate it by clicking the icon, however, I can't start it with a BT headset that I have, can anyone help?
well first fo all did you even activate it for you to use it?
I have voice command working without using the headset, but when i click the answear call button on the headset, it is supposed to open voice command...
and it does, the icon appears but nothing happens..
any solution ?
pl4za said:
I have voice command working without using the headset, but when i click the answear call button on the headset, it is supposed to open voice command...
and it does, the icon appears but nothing happens..
any solution ?
Click to expand...
Click to collapse
Do you give it any commands? for it to do anything?
List of commands
Mikey1022 said:
Do you give it any commands? for it to do anything?
List of commands
Click to expand...
Click to collapse
yes, i say for example, when the icon appears, "call paul" but nothing, shouldn't it play a beep or something ?
Im using microsoft voice command.. and the headset supports voice commands..
i already did a hard reset bue still doesn't work...
What rom version are you using?
Mikey1022 said:
What rom version are you using?
Click to expand...
Click to collapse
i have a samsung i640v, never changed the rom.. i can't find any rom for this device btw.
when i press the headset button, i can hear the headset turning on the speaker and then it shows the icon of input voice, but it doesn't detect my voice from the headset : /
thanks for the quick reply
pl4za said:
i have a samsung i640v, never changed the rom.. i can't find any rom for this device btw.
when i press the headset button, i can hear the headset turning on the speaker and then it shows the icon of input voice, but it doesn't detect my voice from the headset : /
thanks for the quick reply
Click to expand...
Click to collapse
I have similar problem with samsung i900 ? any solutions ?
savedid said:
I have similar problem with samsung i900 ? any solutions ?
Click to expand...
Click to collapse
no one ?
savedid said:
I have similar problem with samsung i900 ? any solutions ?
Click to expand...
Click to collapse
Yeah same challange... came from an E71 that keep dropping/reconnecting bluetooth connection and now the samsung does not play 100% either (well at least it does not drop out). When u install MVC it maps to the menu button on the right top of device, check under options in MVC 'connect via bluetooth if avail' and use the menu button - talk commands into i900 when it beeps... it will still route the call through the BT headset when connected ..not ideal but the best solution until a fix is avail
I would like to know if the application Cyberon Voice Speed Dialer works on the HTC Touch HD2 through Bluetooth headset?
How to adjust start of the program by the headset’s button?
I'm also looking for a working version
Count me in too.. All the Cyberon Voice Speed dial and Voice Commands .cab's out there
won't work.
They won't have you press your headset button and talk to call.
It will have you be able to press a button on the phone and talk to call.
But of course, we all want to press the button on the BT headset while driving and so.
The cab in the 4th post down. Cyberon voice, it worked for my TD2
http://forum.xda-developers.com/showthread.php?t=509120
RE: How to attache the voice speed dialer to a button?
Any idea how to attached the voice speed dial to button 1? Since on the HD2 when you went to the button menu - there are none shown to be selected
Try setting the authenticated connection to OFF
Try setting the authenticated connection to OFF
This works !
Start-Settings, then <menu> All settings (its the quickmenu bottom right)
Bluetooth -
there you can set properties (nickname and authorized connections)
Deselect authorized connections
please your comments !
Hold button enable for Cyberon speed dial
Hold button enable for Cyberon speed dial
tsipistri said:
Hold button enable for Cyberon speed dial
Click to expand...
Click to collapse
You are my sunshine, my only sunshine
You make me happy when skies are gray
You'll never know dear, how much I love you
Please don't take my VOICE CALL away
Thanks you are the best dude
then we are only missing: through Bluetooth headset....
Can some one fix that to??
Cyberon cab
This one works well, courtesy of Miri.
Sorry,
Cyberon speed dial hold button.cab doesn't work with Miri's CVSD without tweaking links.
Works well with what ? With BlueTooth ?
maymaymay said:
Works well with what ? With BlueTooth ?
Click to expand...
Click to collapse
No.. BT button not working... Just from menu (or hard key on device)
Miri CVSD
maymaymay said:
Works well with what ? With BlueTooth ?
Click to expand...
Click to collapse
Works well, works well with bluetooth too.
I have a Blueant supertooth handsfree.
I press the send key and CVSD starts and responds to commands.
If MSVC is installed it is then the default app when handsfree send is pressed.
Xaddict said:
Works well, works well with bluetooth too.
I have a Blueant supertooth handsfree.
I press the send key and CVSD starts and responds to commands.
If MSVC is installed it is then the default app when handsfree send is pressed.
Click to expand...
Click to collapse
BlueTooth Voice Dail working on the HD2 (leo) ??
BrownGhost said:
BlueTooth Voice Dail working on the HD2 (leo) ??
Click to expand...
Click to collapse
Yes, with Microsoft Voice Command, not with CVSD
Is there any way to re-configure this application to attach to the voice speed dealer button 4 (hold) which is the remote headset button instead of button 1? This will enable long press of the bluetooth button to activate the speed dialer. I hope it will be a minor change of this application, but it will help a lot.
Forgot - I mean the application provided from Tsipistri - Cyberon speed dial hold button.cab
maymaymay said:
Yes, with Microsoft Voice Command, not with CVSD
Click to expand...
Click to collapse
How did you get MSVC work with bluetooth on the leo.
My MSVC sounds do not get redirected to the headset but come out of the device-speaker.
Which version do you use?
Hi All
HD2 and MSVC
CVSD works fine for me using MIRI's cab - tried several others with no luck
Does any one have a working version of MSVC for the new HD2
I have always had MSVC on my previous phones setup for anouncing calls and use CVSD for voice dial.
This has worked flawlessly on my last Touch HD running WM6.5 rom but the current version of MSVC I have will not annouce calls via my bluetooth headset no matter what I do - will only annouce via the phone speaker.
Any help with this would be greatly appreciated
Cheers
maymaymay said:
Yes, with Microsoft Voice Command, not with CVSD
Click to expand...
Click to collapse
can not get: MSVC to work at alle, error under installation.
maybe you can post a compleat set of things to use that works.
program to do voice call
BlueTooth - voice call
and press and hold call botton = voice call
thats the things we need, all of us in here..
i have downloaded it and it will not install on the phone comes up with an errror message what can i do it cost me £20 !!
rrichcraw said:
i have downloaded it and it will not install on the phone comes up with an errror message what can i do it cost me £20 !!
Click to expand...
Click to collapse
Get a refund. Its been discussed here on several threads that Microsoft Voice Command does not work with the HD2 due to the widcomm bluetooth stack.
I have MS Voice Command 1.6.21725 installed on my HD2 and it works fine for me.
Paul.
firstandlast said:
I have MS Voice Command 1.6.21725 installed on my HD2 and it works fine for me.
Paul.
Click to expand...
Click to collapse
Mistyped. It doesnt work PROPERLY with the HD2.
Have you tried using it with a bluetooth headset or car kit?
optiknerv said:
Have you tried using it with a bluetooth headset or car kit?
Click to expand...
Click to collapse
What we meant is whether activation of voice command by pressing on BT headset button works?
weenween said:
What we meant is whether activation of voice command by pressing on BT headset button works?
Click to expand...
Click to collapse
Ye its not meant to work and its supposed to fail to route audio to the headset also.
i cannot even get the software to open !!
if i need to get the software 1.621725 where can i get it
and if there is any other voice command software i can get to do this i only need it when i am in the car with blue tooth !!
thanks!
rrichcraw said:
i cannot even get the software to open !!
if i need to get the software 1.621725 where can i get it
and if there is any other voice command software i can get to do this i only need it when i am in the car with blue tooth !!
thanks!
Click to expand...
Click to collapse
cyberon voice commander works fine.
MSVC can be tricky to those who install it for the first time. YOu can try button mapping software and map a button to the application. alternatively, look in your programs folder with a good file explorer and then copy the exe file for the program and paste the shortcut to the \WIndows\start menu folder on your device... you will then see the shortcut that activates MSVC.... this can then be added to your home screen shortcuts....
It works on the HD2 without problems... many people forget that MSVC is a voic command app.... and it works great... however, integration with a BT headset is flawed due to the widcomm stack that wont play nice. However, MS updated their app recently (late Nov) on the Handango US site. I would be VERY interested in knowing what version MSVC you are running (US version number? or is it the UK one?). THere are rumors that it may have been updated slightly to work better with our phones.
All your MSVC settings can also be found under settings (then choose all settings in menu)... look in the personal folder... its there....
will not even open program
as i said the phone will not even open the program????
What do you mean by that? You cant find the exe? you can't find the icon? You found it but clicking it does nothing?
optiknerv said:
cyberon voice commander works fine.
Click to expand...
Click to collapse
Activation by BT headset also?
MSVC 1.62175 works okay for me so far. Activation via BT works partially. What I mean is that pressing the BT button activates MSVC but the sound and mic is via the phone. When it start dialling, the audio is transferred to the BT headset. I can live with that, though not ideal.