Keeping Internet Calling available on 3g - General Questions and Answers

I got internet calling working on my WM61 but after some inactivity time 3G connection is dropped and the phone stops refreshing the SIP registration, so I start missing calls.
Is there a way to make sure the phone re registers periodically with the SIP server and also keeps the connection active even if the phone is idle????

If i'm not mistaken there's a "disconnect when idle" option in Schap's Advanced Config.. try disabling this option.

Do you refer to the ¨GPRS disconnect¨ option??
Also, same question I asked originally applies to wifi connection. When I loose wifi signal internet calling is unavailable (of course), although once I get wifi connection again in another place Internet Calling does not become available. What I´m doing now to re-enable it is dissabling Internet Calling and re enabling it. I wonder if this could be done automatically.

Related

Qtek 8310 WiFi problems

Hi all, I am new here and to smart phones, did the "cc" tweak for the volume, worked great, I now have a wifi issue, i have signal, the phone see's the signal, but when i launch IE it say's "your internet comm is not config properly. Please verify your settings in data connection" I have looked at things and cannot find anything that loks wrong. I find connections but not data connections. If anyone can help.. I am deployed in Iraq and have very little access to any kind of help...Thanks-- ps..feel free to use email
It may be that internet explorer is set up to only use WAP and therefore not able to get a connection. In your IE options, make sure it says Internet or Work depending on how you set your wifi up.
Stay safe.

3G or WiFi

On my Touch HD, I have WiFi setup and running.. this works fine. If I wish to setup through my line provider's settings, I can also have Mobile Web.. now WiFi is free and MW means additional costs.. is there a way of simply setting the device up so that I control when 3G is used or does the phone always look to 3G first, even if WiFi is on and has a very strong signal..
I asked as my phone was set up on WiFi and I could do what I wanted, but now that I have set up the emails account, the phone seems to switch to 3G to download my emails.. am I missing something simple or is this the way its meant to be...cheers..

Any way of knowing if data is coming through 3G or WiFi?

Pretty self explanatory this one - is there any way of knowing whether your mobile internet connection (3G) or WiFi is being used in, for example, a browser session? Just don't want to make the mistake of looking at YouTube on the phone, meaning to use the home WiFi, and end up using my 3G by accident, and paying through the nose for extra feed.
ryanbryan said:
Pretty self explanatory this one - is there any way of knowing whether your mobile internet connection (3G) or WiFi is being used in, for example, a browser session? Just don't want to make the mistake of looking at YouTube on the phone, meaning to use the home WiFi, and end up using my 3G by accident, and paying through the nose for extra feed.
Click to expand...
Click to collapse
The icons on your task bar should indicate if you have a active data connection.
Or, you can use Spb Wireless Monitor (which you need to purchase). It produces reports telling you which software uses which connections and the amount of data transferred.
In a discussion I had with HTC Tech Support, they told me that wifi, when enabled, over-rides the cellular data. I'm not sure if this just applies to the settings or always. Hopefully, someone can provide a definitive answer.
Yes that is correct, if WIFI is enabled you WILL NOT have a cellular data connection.
Umm. There is a wifi icon in the taskbar o.o and a signal icon also.....whichever is there means it's active and if wifi is there, your data will not be active, only wifi.
What all you are saying is true but some applications still use the data network even if wifi is turned on and connected it seems. I have the same issue(i don't have a data plan with my fuze since my college has wifi everywhere). But things like weather and other native apps on the phone will just turn on the 3g network and stat using data instead of wifi.
if a device is transfering data over gprs/3g whatever
it show arrows moving in the signal str icon
otherwise it use wifi
Applications can choose to use a certain connection if they are programmed to do so, windows only gives each one a type of 'ranking', the fastest connection having the highest ranking and being the one an application is to use by default, but the application can override this and choose whatever connection it likes. This ranking is called the "Interface Metric" if you'd like to learn more about it.
There's an HTC program called 'bytecounter' that monitors the SMDx: ports in the system, which are the ports the system uses for data.. in bytecounter you will see the values increase if an application is using data over cellular network. let me know if you'd like me to upload it.
Umm. There is a wifi icon in the taskbar o.o and a signal icon also.....whichever is there means it's active and if wifi is there, your data will not be active, only wifi.
Click to expand...
Click to collapse
Well that wasn't particularly helpful. I too have made the same assumption, but the question asked if there was any way to make sure.
windows only gives each one a type of 'ranking', the fastest connection having the highest ranking and being the one an application is to use by default, but the application can override this and choose whatever connection it likes
Click to expand...
Click to collapse
Well that was the kind of answer I was looking for, and is particularly pertinent in my case, as my connection through my mobile provider is about as fast (or maybe even faster) than my fixed line connection at home. A rather bizarre situation, but such is the advancement of Australian broadband infrastructure.
The last couple of times I have used it, I have taken to turning off the phone connection so that only WiFi is running, and then using the internet. It would be good if you can upload the byetcounter program, seems like a free (?) version of the software programatix mentioned.
Here ya go!
Maybe this is just me, but when I try to unzip that file, nothing comes up....?
lol, i always forget to remove the hidden attribute.. let me go ahead and fix that..
Edit: fixed
Newer Windows Live (including the one that come with Touch Pro) will always dial-up the 3G/GPRS connection when checking for email in Messaging. But if you are checking in Windows Live, most of the time it doesn't dial-up but sometimes, it does.
So far that is the only program that I know of behaves like this. I contacted Microsoft regarding this and they keep asking me to contact my celular provider for help. In other word, they are not helping (or do not understand the problem).
Anyway I solved the problem by changing the Connections setting to "My Work Network" for Internet. The catch is, if I really want to use 3G/GPRS, I'll have to change the setting to my celular 3G/GPRS connection.
Or you could use the nodata application from modaco and disable whenever you like the cellular 3g connection just to be sure you are using wifi.When you are away from wifi networks you can in a matter of 2 clicks reenable the cellular 3g connection...

[help] internet trouble.

This phone is bugging me. ill be home, where I have low/no service, ill try to connect to wifi, but the phone will try to connect to gprs/3g. then sometimes ill have service and it wont connect at all. IE will work but not opera or some other programs. WIFI is searching 24/7 telling when theres a connection. anyone else have this problem?
I want to leave wifi on but only connect to networks registered.
I want if there's no 3g connect to wifi if available.
seems simple to me. possible? maybe i need to change some settings?
There is "no data" but that don't really solve the problem.
I have expereinced the same, especialy if I have low signal then the gprs/3g connections starts up.
It would be neat with an application that gave you a pop up where you had to confirm that you want to connect thru anything other than wifi or bluetooth.
I have the nodata program on my phone and it works great. Search the forum for the program and if you cant find it tell me and I'll attach the .cab
jaszek said:
I have the nodata program on my phone and it works great. Search the forum for the program and if you cant find it tell me and I'll attach the .cab
Click to expand...
Click to collapse
whats the program do
http://letmegooglethatforyou.com/?q=nodata+pocketpc
aonavy said:
whats the program do
Click to expand...
Click to collapse
NoData is probably not what you're looking for. It will allow you to disable traffic through a selected data connection. But it must be enabled / disabled manually. Sounds like you're looking for something that will toggle automatically, giving priority / preference to your WiFi connection when it's available.
There's a program called CommMgrPro that will do what you're looking for. That is, enable and disable connections based on things like cell tower location, detection of WiFi, etc. There's also a forum page for the program here.
A program called Bandswitch (at the same site as CommMgr Pro) will do similar to NoData, except it will let you choose enable / disable based on Time of day presets.
Also here in the forum you can find a program called WifiLocations. It will do similar to the first program above above. If you search the forum there are a few more (some free) programs that will do what you're looking for. Good luck!
My problem with the nodata program is that I can't seem to disable gprs/3g traffic while using wifi. It might be that I have an old version, but I have found many times that even with nodata running in the background with disabled data traffic, it still connects me if I loose my wifi connection.
hotmail said:
NoData is probably not what you're looking for. It will allow you to disable traffic through a selected data connection. But it must be enabled / disabled manually. Sounds like you're looking for something that will toggle automatically, giving priority / preference to your WiFi connection when it's available.
There's a program called CommMgrPro that will do what you're looking for. That is, enable and disable connections based on things like cell tower location, detection of WiFi, etc. There's also a forum page for the program here.
A program called Bandswitch (at the same site as CommMgr Pro) will do similar to NoData, except it will let you choose enable / disable based on Time of day presets.
Also here in the forum you can find a program called WifiLocations. It will do similar to the first program above above. If you search the forum there are a few more (some free) programs that will do what you're looking for. Good luck!
Click to expand...
Click to collapse
thank you very much for the info. I think I sorta fixed it pretty well on my own.Still need the toggle off and on though.
I hard resetted it with out the bloat. then configured my interenet like this:
http://forums.wireless.att.com/cng/board/message?board.id=cingular&message.id=110811
then i went to sounds/notifications in settings, i think, and disabled the wifi notification.
seems to work pretty well.
i take back what i said.it goes in and out. I had 3g service and it said I was connected to media net, but it wouldnt let me get to the net. this phone is a pain when it comes to internet and gps
what do you guys have for internet settings under start>settings>connections>connections>advanced>select network
what setup do i use in the first in the first box and the which setup in the second.
mine 1st media net
2nd my work network (whatever that is)
aonavy said:
i take back what i said.it goes in and out. I had 3g service and it said I was connected to media net, but it wouldnt let me get to the net. this phone is a pain when it comes to internet and gps
Click to expand...
Click to collapse
Edit your MEdiaNet connection settings so your proxy is DISABLED. If it is enabled your WiFi will try to use it too - which is not possible. Unchecking the proxy will have have no discernible impact to your browsing speed when you are using the AT&T data connection.
aonavy said:
what do you guys have for internet settings under start>settings>connections>connections>advanced>select network
what setup do i use in the first in the first box and the which setup in the second.
mine 1st media net
2nd my work network (whatever that is)
Click to expand...
Click to collapse
You can safely set both to MEdiaNet. If you have WiFi enabled and you're connected to your access point it will take precedent over your GPRS (Edge) or UMTS (3G) connection. It is not necessary to disable the AT&T data connection if you are connected and browsing over your WiFi connection. As soon as you turn off or lose your WiFi signal, your phone will go back to using the AT&T data connection.
hotmail said:
Edit your MEdiaNet connection settings so your proxy is DISABLED. If it is enabled your WiFi will try to use it too - which is not possible. Unchecking the proxy will have have no discernible impact to your browsing speed when you are using the AT&T data connection.
You can safely set both to MEdiaNet. If you have WiFi enabled and you're connected to your access point it will take precedent over your GPRS (Edge) or UMTS (3G) connection. It is not necessary to disable the AT&T data connection if you are connected and browsing over your WiFi connection. As soon as you turn off or lose your WiFi signal, your phone will go back to using the AT&T data connection.
Click to expand...
Click to collapse
okay..thanks for the post.
set media net for both and disable proxy and I should be okay correct?
2 questions:
how do I disable the the proxy? delete wap.cingular from the settings? click disable proxy icon?
also i heard if you have one of these disable you cant use your mms?
up up up and away...

[Q] How to force the phone to never use anything but wifi?

I sometimes uses the wifi connection to surf the web on my touch pro, problem is that the wifi reciver don't look to be very strong so sometimes I loose the connection, especially if I'm moving around.
I have found the program nodata, but it doesn't seem to work that well. Even if I activate nodata and have it running in the background while surfing the phone still connects to gprs/3g connection if the signal is lost. My guess is that if I click a link after I loose the wifi connection the phone seem to override the funtion of nodata. Is there any other software that I can use instead?
I want the phone to wait until a wifi connection is established again instead of changing to a 3g/gprs connection.
I'm not sure. Once I removed all the data connection settings, but then I couldn't use the data ever. I've been keeping an eye for a program that does this, but it seems that everyone under the sun other than me has a data plan.
hahaha yo are noy allone out there, I would alslo like to know how to disable data conection.
the answer - modaco nodata. Its not the neatest but the only one
EDIT: and also you can do this in Advanced Configuration Tool from "connections" menu item. If you want a more permament solution (because of the long way to the choise in the app)
All the apps I mention are really easy to google for
darfri said:
the answer - modaco nodata. Its not the neatest but the only one
Click to expand...
Click to collapse
yes...nodata is the one you want.....just search and you shall find
Not sure if this helps but when I handed down my Hermes to my Father in Law just so he could use it for phone calls and TomTom (via BT GPS). I had AT&T block all data so he can only use wifi.
It works great! when his wifi is turned off and he tried to go to the web it says connection refused.
Thanks for the input guys, but nodata don't seem to help me. It's the software I use now, but it seems that somethign is able to override the nodata software leading the phone to dial up when the wifi connection gets a low signal.
I'll give the Advanced Configuration Tool a go, but it seems to be a lot of work going in there turning things off, just to go back and activate them again if I want to check my mail "in the field".
I have an at&t Fuze with no data plan, just unlimited text/mms. I cannot disable data by using Modaco's NoData because mms requires Media Net.
What I have done so that all apps use WiFi is the follows:
Under Start / Settings, select the Connections tab.
Launch Connections.
Select Advanced tab.
Click on Select Networks.
Under Network Management, change "Programs that automatically connect to the Internet should connect using:" to "My Work Network".
With this setting, I don't have Internet connection unless WiFi is active, which is what I want. Maybe the Touch Pro has something similar.
Thanks icwinner, that seem to have made the trick.

Categories

Resources