I was used that my cab files would disappear from my sd card after installing in wm2003. It didn't happen with wm2005 in Hima, but it happens again with my S200. Do I need to change something or os this normal? Anayway, I find this very annoying.
You have to make them read only before installing them
JD
Thanx for the advice JD. BTW do you have any idea which keyboard skin is working on the S200 (Prophet)? I tried OSXblue from Buzz, but doesn't work.
Or you cantry this registry hack:
Make WM5 keep CAB files around after installing
An alternative method of making WM5 keep the original .CAB file around after installing the application is by adding the "/nodelete" option to the Windows CE loader:
HKCR\cabfile\Shell\open\command = 'wceload.exe "%1" /nodelete' (REG_SZ string, no quotes)
Putra said:
Or you cantry this registry hack:
Make WM5 keep CAB files around after installing
An alternative method of making WM5 keep the original .CAB file around after installing the application is by adding the "/nodelete" option to the Windows CE loader:
HKCR\cabfile\Shell\open\command = 'wceload.exe "%1" /nodelete' (REG_SZ string, no quotes)
Click to expand...
Click to collapse
hi putra,
thanx i too was wondering for same.
thanx
nandlal
Hello all,
I just re-constructed a CHT ROM for backup before cooking. But the kaiser brick after flash the ROM.
WM6 simple not boot. It start with "smart mobility" image then white screen and black. Won't boot to WM6....
I tried use mtty.exe to connect but it said USB cannot open.....
Pls help.
thanks.
kfluk
kfluk said:
Hello all,
I just re-constructed a CHT ROM for backup before cooking. But the kaiser brick after flash the ROM.
WM6 simple not boot. It start with "smart mobility" image then white screen and black. Won't boot to WM6....
I tried use mtty.exe to connect but it said USB cannot open.....
Pls help.
thanks.
kfluk
Click to expand...
Click to collapse
Do you flash the one i send you, or the one you made?
Anyway, put the Kaiser in bootloader mode (you have HardSPL ), and flash WWE ROM you can find in Austinsync sticky thread.
Cheers.
jcespi2005 said:
Do you flash the one i send you, or the one you made?
Anyway, put the Kaiser in bootloader mode (you have HardSPL ), and flash WWE ROM you can find in Austinsync sticky thread.
Cheers.
Click to expand...
Click to collapse
Just found out how to enter bootloader mode.
Both of our ROM I tried to flash. Result is the same.
It seem I am out of luck...
kfluk
Hello jcespi2005,
I flash WWE Cooked ROM and it work fine. I hope Tadzio figure out a way to make CHT ROM work.
Do you think is there something wrong with ROM re-construction the procedure?
kfluk
kfluk said:
Hello jcespi2005,
I flash WWE Cooked ROM and it work fine. I hope Tadzio figure out a way to make CHT ROM work.
Do you think is there something wrong with ROM re-construction the procedure?
kfluk
Click to expand...
Click to collapse
Glad to hear you are on the road again
I'll take down the link to CHT reconstructed ROM for now.
I don't beleave related with the procedure, cause i used to reconstruct the spanish Kaiser ROM, and someone in the thread post about other successfully reconstructed ROM, so perhaps is related to part02.raw itself, but don't know. I sent a message to Tadzio, waiting the answer.
Cheers.
jcespi2005 said:
Glad to hear you are on the road again
I'll take down the link to CHT reconstructed ROM for now.
I don't beleave related with the procedure, cause i used to reconstruct the spanish Kaiser ROM, and someone in the thread post about other successfully reconstructed ROM, so perhaps is related to part02.raw itself, but don't know. I sent a message to Tadzio, waiting the answer.
Cheers.
Click to expand...
Click to collapse
Side track, I found custom method to make WWE OS display CHT lang. Not work well with hardware keyboard. Some of key does not work well.
It cause me have more urgency to return CHT ROM....
kfluk said:
Side track, I found custom method to make WWE OS display CHT lang. Not work well with hardware keyboard. Some of key does not work well.
It cause me have more urgency to return CHT ROM....
Click to expand...
Click to collapse
I don't know whether this can help you to solve the keyboard problem.
Some Registry key from my tytn II:
\HKCU\keyboard layout\Preload Default - "e0010404"
\HKCU\keyboard layout\Preload\1 Default - "e0010404"
\HKCU\keyboard layout\Preload\2 Default - "e0020404"
Hope it may help U!
kekekaka said:
I don't know whether this can help you to solve the keyboard problem.
Some Registry key from my tytn II:
\HKCU\keyboard layout\Preload Default - "e0010404"
\HKCU\keyboard layout\Preload\1 Default - "e0010404"
\HKCU\keyboard layout\Preload\2 Default - "e0020404"
Hope it may help U!
Click to expand...
Click to collapse
hello,
I guess this is preload keyboard layout but not key mapping. I need this for another purpose too. thanks.
For key mapping, it looks like exist at HKLM\HARDWARE\DEVICEMAP\KEYBD
kfluk
kekekaka said:
I don't know whether this can help you to solve the keyboard problem.
Some Registry key from my tytn II:
\HKCU\keyboard layout\Preload Default - "e0010404"
\HKCU\keyboard layout\Preload\1 Default - "e0010404"
\HKCU\keyboard layout\Preload\2 Default - "e0020404"
Hope it may help U!
Click to expand...
Click to collapse
Can you attach your sym.0404.txt file? you can find in \windows
With this file i can make a CAB...
jcespi2005 said:
Can you attach your sym.0404.txt file? you can find in \windows
With this file i can make a CAB...
Click to expand...
Click to collapse
There is no sym.0404.txt file!
There is only sympad0404.txt!
Anyway, I upload it to you first!
kekekaka said:
There is no sym.0404.txt file!
There is only sympad0404.txt!
Anyway, I upload it to you first!
Click to expand...
Click to collapse
Yes, i view this in the dump folder.
Strange, seems Dopod ROM don't use the same method for the keybd.
Anyway, i attach the CAB to see if works for kfluk in the WWE ROM.
Good luck, i hope.
jcespi2005 said:
Yes, i view this in the dump folder.
Strange, seems Dopod ROM don't use the same method for the keybd.
Anyway, i attach the CAB to see if works for kfluk in the WWE ROM.
Good luck, i hope.
Click to expand...
Click to collapse
Hello jcespi2005,
Before and after install, it seems the same. (I am now use Helmi_Kaiser_1.57.00.03_AKU.0.7.0.Cooked_clean+bigstorage.exe"
no luck until now. Chinese Keyboard has a button call "switch input". This button now mapped to "Tab".
For other button has the following error. (all button said press Fn)
A = _ (original is Tab)
S = " (original is _)
Switch Input = Tab
All other button is ok.
Will switch to other ROM. WWE ROM seems not fit my hardware. Feeling is strange.
** Update: The Switch Input button may be no problem in mapping. I found this button work in word prediction. Just different function in WWE and CHT ROM.
kfluk
kfluk said:
Hello all,
I just re-constructed a CHT ROM for backup before cooking. But the kaiser brick after flash the ROM.
WM6 simple not boot. It start with "smart mobility" image then white screen and black. Won't boot to WM6....
I tried use mtty.exe to connect but it said USB cannot open.....
Pls help.
thanks.
kfluk
Click to expand...
Click to collapse
hello kfluk and all guys in this thread!
glad to see someone studying the Chinese ROM
coz i had tried to cook the ROM with English UI that supports chs/cht,but failed.the result was the same as kfluk's.just froze at the smart mobility screen.
i guess ive taken the wrong way to modify the .hv file.
but my kaiser with hspl wasnt bricked and came back to life.
try this method to flash your device again:
1,connect your device with computer using usb cable
2,boot your device,give it some seconds when you see the smart mobility screen and some red words at the right bottom
3.run the KaiserCustomRUUv1.exe(of cause there would be one .nbh os file near it in order to flash into your kaiser),click all "NEXT" you can until it says "verifying the information on your ...."
4.camera+power+reset hold
in this way i flash my rom as normal,hope that could help you.
about the CHT keyboard mapping problem
just need to modify some key in registry [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
change"CurLang" to 404 (Hex)
if you see a dword named "CWSLayout",del it or change it to"0"
then soft-reset
i make a cab to you,too transfer to your device and run it->soft-reset
after that i think the letters are now assigned to the right key buttons
REGARDS
Sheng
woohyuksheng said:
hello kfluk and all guys in this thread!
glad to see someone studying the Chinese ROM
coz i had tried to cook the ROM with English UI that supports chs/cht,but failed.the result was the same as kfluk's.just froze at the smart mobility screen.
i guess ive taken the wrong way to modify the .hv file.
but my kaiser with hspl wasnt bricked and came back to life.
try this method to flash your device again:
1,connect your device with computer using usb cable
2,boot your device,give it some seconds when you see the smart mobility screen and some red words at the right bottom
3.run the KaiserCustomRUUv1.exe(of cause there would be one .nbh os file near it in order to flash into your kaiser),click all "NEXT" you can until it says "verifying the information on your ...."
4.camera+power+reset hold
in this way i flash my rom as normal,hope that could help you.
about the CHT keyboard mapping problem
just need to modify some key in registry [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
change"CurLang" to 404 (Hex)
if you see a dword named "CWSLayout",del it or change it to"0"
then soft-reset
i make a cab to you,too transfer to your device and run it->soft-reset
after that i think the letters are now assigned to the right key buttons
REGARDS
Sheng
Click to expand...
Click to collapse
Brick was solved. I just don't know how to enter boot loader mode before.
Thanks for keyboard registry, I will apply it to test.
btw, I found if modify registry key HKLM\MUI change SysLang from 404 to 409 and HKLM\nls change SystemLCID from 404 to 409.
Result will make WM6 can display Chinese and use default English font.
Since apply Chinese font and input to WWE kaiser will cause it use ugly font display english. Furthermore, it cause some menu not display properly too.
the above registry fix it. I found and apply yesterday night and result is good. No side effect until now.
kfluk
woohyuksheng said:
hello kfluk and all guys in this thread!
glad to see someone studying the Chinese ROM
coz i had tried to cook the ROM with English UI that supports chs/cht,but failed.the result was the same as kfluk's.just froze at the smart mobility screen.
i guess ive taken the wrong way to modify the .hv file.
but my kaiser with hspl wasnt bricked and came back to life.
try this method to flash your device again:
1,connect your device with computer using usb cable
2,boot your device,give it some seconds when you see the smart mobility screen and some red words at the right bottom
3.run the KaiserCustomRUUv1.exe(of cause there would be one .nbh os file near it in order to flash into your kaiser),click all "NEXT" you can until it says "verifying the information on your ...."
4.camera+power+reset hold
in this way i flash my rom as normal,hope that could help you.
about the CHT keyboard mapping problem
just need to modify some key in registry [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
change"CurLang" to 404 (Hex)
if you see a dword named "CWSLayout",del it or change it to"0"
then soft-reset
i make a cab to you,too transfer to your device and run it->soft-reset
after that i think the letters are now assigned to the right key buttons
REGARDS
Sheng
Click to expand...
Click to collapse
I modified the key manually. It's work. Can you tell me any tools to create cab or modify ROM package? thanks.
kfluk said:
I modified the key manually. It's work. Can you tell me any tools to create cab or modify ROM package? thanks.
Click to expand...
Click to collapse
For CAB manage, you can use WinCE CAB Manger from http://www.ocpsoftware.com/ and for modify the ROM packages, every package ussually have a .RGU text file with the registry entrys, so you can edit with notepad.
To create packages in this thread you have a little guide...
http://forum.xda-developers.com/showthread.php?t=303195
Cheers.
jcespi2005 said:
For CAB manage, you can use WinCE CAB Manger from http://www.ocpsoftware.com/ and for modify the ROM packages, every package ussually have a .RGU text file with the registry entrys, so you can edit with notepad.
To create packages in this thread you have a little guide...
http://forum.xda-developers.com/showthread.php?t=303195
Cheers.
Click to expand...
Click to collapse
hello jcespi2005,
thanks again for your information. Once HK English ROM available. I will work on it first. Also continue seek for CHT ROM issue solution.
I found voice recognizer in CHT ROM is much better than WWE. Since it does not require training and able to use immediately.
kfluk
Hi!
The free memory of my device is getting smaller and smaller, althought i havent installed too much apps and not to much files.
I've been searching for a reason and found the file
/DebLogger/cprog.log
wich has a size of 26 MB
Can i delete it? Does it contain anything important?
Thanks! Cheers!
ok, after killing the process cprog.exe i was able to delete the file.
but after some usage it starts to grow again...
how to disable this?
thanks alot! cheers
You probably have a memory leak somewhere...
hmm... that means? and what can i do?
thanks!
nobody any idea?
Did you cook your own ROM? Or you using a cooked ROM or stock ROM?
yes i'm using a cooked rom and installed a lot of system changes, for example the new Phone Canvas from the mega pack...
I'm suffering the sme issue here: cprog.log is now 40 MB and i'm almost out of storage space!
me too, not a virus I hope
Yep. Mine is nearly 60 MB and growing.
I'm running TPC's cooked version of WM 6.5, if that matters.
Jack Vinson
ROM: TPC_V10_MEGA (WM 6.5)
Radio: 1.70.19.09
Phone: Kaiser 8925 (AT&T Tilt)
has anybody found a good solution yet?
true de task manager, you can kill cprog.exe and then delete the "big" cprog.log file but what after a restart??
And when i koll cprog.exe, my phone doesn't ring or vibrate anymore when i get called or receving a sms...
Have you tried searching your registry for "cprog.log"? Maybe you can shut it off.
cprog.log same problem
Got same problem !
P3600 HTC Cruise with WM 6.5 Pro cook rom pcarbalho exteme devs. Yesterday was unable to start device ... after various reboot finally started, and with the explorer in an ActiveSync connection :
renamed \DebLogger\cprog.log
restarted again
and finally ... delete the renamed file
have proven to remove the directory, but after restarting again, it re-create the directory and the file start growing again ...
Any solution?
This thread suggests some Registry keys to edit, which I just did. Basically, set everything to OutputEnable of 0, rather than 1 in the DebLogger registry unter HKey_Local_Machine/Software/HTC/DebLogger. This doesn't prevent CProg from running, though. so I don't know if it will keep the size in check.
I also notice another large file that is updated all the time in My Device root directory "pim.log". Anyone know what that is? (pim = Personal Information Management?)
Jack
Solution
Hi, i've found the solution in the TPC thread, someone found the way to delete cprog.
- With Registry Editor go to:
HKey_Local_Machine\Software\HTC\Deblogger
delete the whole Deblogger folder
- Soft Reset
- Delete the folder Deblogger with cprog inside in the Device Memory.
You have no more cprog growing and the mobile runs smoothly.
Do this procedure again if you do a hard reset, because the Deblogger is cooked inside Windows 6.5 build.
I think chefs will remove the Deblogger in their future ROMs.
Additions to the resolution process
Had this issue too... system became gradually slower and suddenly had run out of space ("you are running critically low on storage" kind of message).
Before I could delete the large file I had to install and run a task manager on the mobile and terminate/kill the "cprog.exe" application/process.
Cheers,
Daniel
Hmmm...for some reason I've started getting this issue, on my PDACorner Ultimate (WM 6.1)! Dont think its limited to 6.5 then!
Monfro said:
Hi, i've found the solution in the TPC thread, someone found the way to delete cprog.
- With Registry Editor go to:
HKey_Local_Machine\Software\HTC\Deblogger
delete the whole Deblogger folder
- Soft Reset
- Delete the folder Deblogger with cprog inside in the Device Memory.
You have no more cprog growing and the mobile runs smoothly.
Do this procedure again if you do a hard reset, because the Deblogger is cooked inside Windows 6.5 build.
I think chefs will remove the Deblogger in their future ROMs.
Click to expand...
Click to collapse
Is no need to delete all the folder "HKey_Local_Machine\Software\HTC\Deblogger"
GO TO
HKey_Local_Machine\Software\HTC\Deblogger\zone\deblog\outputenable and modify the key to 0. restart the device and delet the file from main memory
changing the value to 0
Nykoon: I did just that and cprog was still growing. I remove the whole folder and that did it
cprog / deblogger
When I disable or delete the deblogger registry folder and delete cprog, my Pocket e-Sword program doesn't work. Will try again.
Using a Kaiser hTC, windows 6.1.